[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p2 GENERIC amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] module_register: cannot register pci/mskc from kernel; already loaded from if_msk.ko [...] Module pci/mskc failed to register: 17 [...] module_register: cannot register mskc/msk from kernel; already loaded from if_msk.ko [...] Module mskc/msk failed to register: 17 [...] module_register: cannot register msk/miibus from kernel; already loaded from if_msk.ko [...] Module msk/miibus failed to register: 17 [...] CPU: AMD Sempron(tm) SI-40 (2000.17-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x200f31 Family=0x11 Model=0x3 Stepping=1 [...] Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> [...] Features2=0x2001<SSE3,CX16> [...] AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> [...] AMD Features2=0x1319<LAHF,ExtAPIC,CR8,Prefetch,OSVW,SKINIT> [...] TSC: P-state invariant [...] real memory = 3221225472 (3072 MB) [...] avail memory = 2824220672 (2693 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <HP 0944 > [...] random: unblocking device. [...] ioapic0: MADT APIC ID 4 != hw id 0 [...] ioapic0 <Version 2.1> irqs 0-23 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf6960-0xf697e [...] smbios0: Version: 2.4, BCD Revision: 2.4 [...] aesni0: No AES or SHA support. [...] acpi0: <HPQOEM SLIC-MPC> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x11> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0x5000-0x50ff mem 0xc0000000-0xcfffffff,0xd4300000-0xd430ffff,0xd4200000-0xd42fffff irq 18 at device 5.0 on pci1 [...] vgapci0: Boot video device [...] pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] mskc0: <Marvell Yukon 88E8042 Fast Ethernet> port 0x3000-0x30ff mem 0xd3100000-0xd3103fff irq 16 at device 0.0 on pci2 [...] msk0: <Marvell Technology Group Ltd. Yukon FE+ Id 0xb8 Rev 0x00> on mskc0 [...] msk0: disabling jumbo frame support [...] msk0: Using defaults for TSO: 65518/35/2048 [...] msk0: Ethernet address: ... [...] miibus0: <MII bus> on msk0 [...] e1000phy0: <Marvell 88E3016 10/100 Fast Ethernet PHY> PHY 0 on miibus0 [...] e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow [...] pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0 [...] pcib4: <ACPI PCI-PCI bridge> at device 9.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib4 [...] bwn_pci0: <Broadcom BCM4328/4312 802.11g Wireless> mem 0xd2000000-0xd2003fff irq 17 at device 0.0 on pci3 [...] bhndb0: <PCI-BHND bridge> on bwn_pci0 [...] bhndb0: Using MSI interrupts on bwn_pci0 [...] bhnd_nvram0: <SPROM/OTP> mem 0xd2001000-0xd2001fff on bhndb0 [...] bhnd0: <BCM4312 SIBA bus> on bhndb0 [...] bhnd_chipc0: <Broadcom ChipCommon I/O Controller, rev 22> mem 0x18000000-0x18000dff,0xffff0000-0xffffffff,0x1c000000-0x1dffffff,0x18000f00-0x18000fff,0x18000e00-0x18000eff irq 0 at core 0 on bhnd0 [...] bhnd_pmu0: <Broadcom ChipCommon PMU, rev 1> on bhnd_chipc0 [...] gpio0: <Broadcom ChipCommon GPIO> mem 0x18000000-0x18000dff on bhnd_chipc0 [...] bhnd_hostb0: <Broadcom PCIe-G1 Host-PCI bridge, rev 9> mem 0x18003000-0x18003dff,0-0x7ffffff,0-0x7fffffff,0x18003f00-0x18003fff,0x18003e00-0x18003eff irq 3 at core 3 on bhnd0 [...] bwn0: <Broadcom 802.11 MAC/PHY/Radio, rev 15> mem 0x18001000-0x18001dff,0x18001f00-0x18001fff,0x18001e00-0x18001eff irq 1 at core 1 on bhnd0 [...] bwn0: WLAN (BCM4312 rev 15 sromrev 8) PHY (analog 6 type 5 rev 1) RADIO (manuf 0x17f ver 0x2062 rev 2) [...] bwn0: DMA (64 bits) [...] ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0x6018-0x601f,0x6024-0x6027,0x6010-0x6017,0x6020-0x6023,0x6000-0x600f mem 0xd4409000-0xd44093ff irq 20 at device 17.0 on pci0 [...] ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier not supported [...] ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xd4408000-0xd4408fff irq 16 at device 18.0 on pci0 [...] usbus0 on ohci0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xd4407000-0xd4407fff irq 16 at device 18.1 on pci0 [...] usbus1 on ohci1 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xd4409500-0xd44095ff irq 17 at device 18.2 on pci0 [...] ehci0: AMD SB600/700 quirk applied [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci0 [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xd4406000-0xd4406fff irq 17 at device 19.0 on pci0 [...] usbus3 on ohci2 [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xd4405000-0xd4405fff irq 17 at device 19.1 on pci0 [...] usbus4 on ohci3 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xd4409400-0xd44094ff irq 19 at device 19.2 on pci0 [...] ehci1: AMD SB600/700 quirk applied [...] usbus5: EHCI version 1.0 [...] usbus5 on ehci1 [...] hdac0: <ATI SB600 HDA Controller> mem 0xd4400000-0xd4403fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib5 [...] ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xd4404000-0xd4404fff irq 18 at device 20.5 on pci0 [...] usbus6 on ohci4 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0. [...] psm0: model Synaptics Touchpad, device ID 0 [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC" frequency 2000070810 Hz quality 1000 [...] CPU0: local APIC error 0x4 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Analog Devices AD1984A HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Analog Devices AD1984A Audio Function Group> at nid 1 on hdacc0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] usbus2: 480Mbps High Speed USB v2.0 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] pcm0: <Analog Devices AD1984A (Analog)> at nid 22 and 21 on hdaa0 [...] pcm1: <Analog Devices AD1984A (Front Analog)> at nid 17 and 20 on hdaa0 [...] hdacc1: <Lucent/Agere Systems (0x1040) HDA CODEC> at cad 1 on hdac0 [...] unknown: <Lucent/Agere Systems (0x1040) HDA CODEC Modem Function Group> at nid 1 on hdacc1 (no driver attached) [...] ugen4.1: <ATI OHCI root HUB> at usbus4 [...] uhub0 on usbus4 [...] uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] ugen0.1: <ATI OHCI root HUB> at usbus0 [...] uhub1 on usbus0 [...] uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] ugen1.1: <ATI OHCI root HUB> at usbus1 [...] uhub2 on usbus1 [...] uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] ugen2.1: <ATI EHCI root HUB> at usbus2 [...] uhub3 on usbus2 [...] uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ugen3.1: <ATI OHCI root HUB> at usbus3 [...] uhub4 on usbus3 [...] uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] usbus5: 480Mbps High Speed USB v2.0 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] ugen6.1: <ATI OHCI root HUB> at usbus6 [...] uhub5 on usbus6 [...] uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] ugen5.1: <ATI EHCI root HUB> at usbus5 [...] uhub6 on usbus5 [...] uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 [...] Trying to mount root from ufs:/dev/ada0s1a [rw]... [...] (aprobe0:ahcich0:0:0:0): SETFEATURES ENABLE SATA FEATURE. ACB: ef 10 00 00 00 40 00 00 00 00 02 00 [...] (aprobe0:ahcich0:0:0:0): CAM status: ATA Status Error [...] (aprobe0:ahcich0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT ) [...] (aprobe0:ahcich0:0:0:0): RES: 51 04 00 00 00 40 00 00 00 02 00 [...] (aprobe0:ahcich0:0:0:0): Retrying command, 0 more tries remain [...] (aprobe0:ahcich0:0:0:0): SETFEATURES ENABLE SATA FEATURE. ACB: ef 10 00 00 00 40 00 00 00 00 02 00 [...] (aprobe0:ahcich0:0:0:0): CAM status: ATA Status Error [...] (aprobe0:ahcich0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT ) [...] (aprobe0:ahcich0:0:0:0): RES: 51 04 00 00 00 40 00 00 00 02 00 [...] (aprobe0:ahcich0:0:0:0): Error 5, Retries exhausted [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST1000LM024 HN-M101MBB 2AR10001> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 953869MB (1953525168 512 byte sectors) [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <Optiarc DVD RW AD-7561S AH03> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] uhub5: 2 ports with 2 removable, self powered [...] uhub0: 3 ports with 3 removable, self powered [...] uhub1: 3 ports with 3 removable, self powered [...] uhub2: 3 ports with 3 removable, self powered [...] uhub4: 3 ports with 3 removable, self powered [...] Root mount waiting for: usbus2 usbus5 [...] Root mount waiting for: usbus2 usbus5 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub6: 6 ports with 6 removable, self powered [...] ugen5.2: <Chicony Electronics Co., Ltd. CKF7063> at usbus5 [...] WARNING: /: TRIM flag on fs but disk does not support TRIM [...] ugen0.2: <SIGMACHIP USB Keyboard> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] WARNING: /home: TRIM flag on fs but disk does not support TRIM [...] [drm] radeon kernel modesetting enabled. [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] initializing kernel modesetting (RS780 0x1002:0x9612 0x103C:0x30E4 0x00). [...] [drm ERROR :radeon_atombios_init] Unable to find PCI I/O BAR; using MMIO for ATOM IIO [...] ATOM BIOS: HP_PrincePearl [...] drmn0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used) [...] drmn0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF [...] [drm] Detected VRAM RAM=256M, BAR=256M [...] [drm] RAM width 32bits DDR [...] [TTM] Zone kernel: Available graphics memory: 1422236 KiB [...] [TTM] Initializing pool allocator [...] [drm] radeon: 256M of VRAM memory ready [...] [drm] radeon: 512M of GTT memory ready. [...] [drm] Loading RS780 Microcode [...] drmn0: successfully loaded firmware image 'radeon/RS780_pfp.bin' [...] drmn0: successfully loaded firmware image 'radeon/RS780_me.bin' [...] drmn0: successfully loaded firmware image 'radeon/R600_rlc.bin' [...] [drm] radeon: power management initialized [...] drmn0: successfully loaded firmware image 'radeon/RS780_uvd.bin' [...] [drm] GART: num cpu pages 131072, num gpu pages 131072 [...] [drm] PCIE GART of 512M enabled (table at 0x00000000C0146000). [...] drmn0: WB enabled [...] drmn0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 [...] drmn0: fence driver on ring 5 use gpu addr 0x00000000c0056038 [...] drmn0: radeon: MSI limited to 32-bit [...] [drm] radeon: irq initialized. [...] [drm] ring test on 0 succeeded in 1 usecs [...] [drm] ring test on 5 succeeded in 1 usecs [...] [drm] UVD initialized successfully. [...] [drm] ib test on ring 0 succeeded in 0 usecs [...] [drm] ib test on ring 5 succeeded [...] [drm] radeon atom DIG backlight initialized [...] [drm] Radeon Display Connectors [...] [drm] Connector 0: [...] [drm] VGA-1 [...] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [...] [drm] Encoders: [...] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [...] [drm] Connector 1: [...] [drm] LVDS-1 [...] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [...] [drm] Encoders: [...] [drm] LCD1: INTERNAL_KLDSCP_LVTMA [...] [drm] fb mappable at 0xC0247000 [...] [drm] vram apper at 0xC0000000 [...] [drm] size 4096000 [...] [drm] fb depth is 24 [...] [drm] pitch is 5120 [...] VT: Replacing driver "vga" with new "fb". [...] start FB_INFO: [...] type=11 height=800 width=1280 depth=32 [...] pbase=0xc0247000 vbase=0xfffff800c0247000 [...] name=drmn0 flags=0x0 stride=5120 bpp=32 [...] end FB_INFO [...] [drm] Initialized radeon 2.50.0 20080528 for drmn0 on minor 0 [...] intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 [...] intsmb0: intr SMI enabled revision 0 [...] intsmb0: using polling mode when configured interrupt is SMI [...] smbus0: <System Management Bus> on intsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMID.WQAB: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] msk0: link state changed to DOWN [...] acpi_tz0: _TMP value is absurd, ignored (256.1C) [...] bwn0: ucode fw: ucode15 [...] bwn0: firmware version (rev 478 patch 104 date 0x8701 time 0x657) [...] bwn0: ucode fw: ucode15 [...] bwn0: firmware version (rev 478 patch 104 date 0x8701 time 0x657) [...] bwn0: ucode fw: ucode15 [...] bwn0: firmware version (rev 478 patch 104 date 0x8701 time 0x657) [...] bwn0: ucode fw: ucode15 [...] bwn0: firmware version (rev 478 patch 104 date 0x8701 time 0x657) [...] bwn0: ucode fw: ucode15 [...] bwn0: firmware version (rev 478 patch 104 date 0x8701 time 0x657) [...] bwn0: ucode fw: ucode15 [...] bwn0: firmware version (rev 478 patch 104 date 0x8701 time 0x657) [...] wlan0: link state changed to UP [...] uhid0 on uhub1 [...] uhid0: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus0 [...] bwn0: need multicast update callback [...] bwn0: need multicast update callback [...] bwn0: need multicast update callback