[...] umodem0: at uhub0, port 7, addr 60 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 61> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 61 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 62> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 62 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 63> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 63 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 64> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] rtsx0: Suspend [...] wlan0: link state changed to DOWN [...] uhub0: at usbus0, port 1, addr 1 (disconnected) [...] ugen0.2: <Generic EMV Smartcard Reader> at usbus0 (disconnected) [...] ugen0.3: <VIA Labs, Inc. USB2.0 Hub> at usbus0 (disconnected) [...] uhub1: at uhub0, port 2, addr 2 (disconnected) [...] ugen0.4: <VIA Labs, Inc. USB2.0 Hub> at usbus0 (disconnected) [...] uhub2: at uhub1, port 3, addr 3 (disconnected) [...] ugen0.5: <Lenovo USB2.0 Hub> at usbus0 (disconnected) [...] uhub3: at uhub2, port 3, addr 4 (disconnected) [...] ugen0.6: <Cypress Semiconductor 40AS> at usbus0 (disconnected) [...] uhid0: at uhub3, port 1, addr 5 (disconnected) [...] uhid0: detached [...] ugen0.7: <Lenovo ThinkPad USB-C Dock Gen2 USB Audio> at usbus0 (disconnected) [...] uaudio0: at uhub3, port 2, addr 6 (disconnected) [...] pcm3: detached [...] uaudio0: detached [...] uhid1: at uhub3, port 2, addr 6 (disconnected) [...] uhid1: detached [...] uhub3: detached [...] uhub2: detached [...] uhub1: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 64 (disconnected) [...] umodem0: detached [...] ugen0.9: <Chicony Electronics Co.,Ltd. Integrated Camera> at usbus0 (disconnected) [...] ugen0.10: <vendor 0x06cb product 0x00bd> at usbus0 (disconnected) [...] ugen0.11: <vendor 0x8087 product 0x0aaa> at usbus0 (disconnected) [...] ubt0: at uhub0, port 10, addr 10 (disconnected) [...] ubt0: detached [...] ugen0.12: <VIA Labs, Inc. USB3.1 Hub> at usbus0 (disconnected) [...] uhub4: at uhub0, port 14, addr 11 (disconnected) [...] ugen0.13: <Realtek USB-C Dock Ethernet> at usbus0 (disconnected) [...] ure0: at uhub4, port 1, addr 12 (disconnected) [...] rgephy0: detached [...] miibus0: detached [...] ure0: detached [...] ugen0.14: <VIA Labs, Inc. USB3.1 Hub> at usbus0 (disconnected) [...] uhub5: at uhub4, port 3, addr 13 (disconnected) [...] uhub5: detached [...] uhub4: detached [...] uhub0: detached [...] vgapci0: child drmn0 requested pci_set_powerstate [...] pci0: failed to set ACPI power state D3 on \134_SB_.PCI0.GFX0: AE_BAD_PARAMETER [...] acpi0: cleared fixed power button status [...] vgapci0: child drmn0 requested pci_set_powerstate [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] drmn0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it [...] drmn0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it [...] drmn0: [drm] [ENCODER:117:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it [...] rtsx0: Resume [...] rtsx0: Controller timeout for CMD8 [...] rtsx0: Controller timeout for CMD8 [...] rtsx0: Controller timeout for CMD8 [...] rtsx0: Controller timeout for CMD8 [...] rtsx0: Controller timeout for CMD55 [...] rtsx0: Controller timeout for CMD55 [...] rtsx0: Controller timeout for CMD55 [...] rtsx0: Controller timeout for CMD55 [...] rtsx0: Controller timeout for CMD1 [...] rtsx0: Controller timeout for CMD1 [...] rtsx0: Controller timeout for CMD1 [...] rtsx0: Controller timeout for CMD1 [...] mmc0: No compatible cards found on bus [...] nvme0: resubmitting queued i/o [...] nvme0: WRITE sqid:2 cid:0 nsid:1 lba:35986656 len:8 [...] nvme0: done resubmitting i/o [...] nvme0: resubmitting queued i/o [...] nvme0: WRITE sqid:3 cid:0 nsid:1 lba:962179576 len:8 [...] nvme0: done resubmitting i/o [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub0: 18 ports with 18 removable, self powered [...] ugen0.2: <Generic EMV Smartcard Reader> at usbus0 [...] ugen0.3: <VIA Labs, Inc. USB2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/d.24, addr 2> on usbus0 [...] uhub1: MTT enabled [...] wlan0: link state changed to UP [...] uhub1: 4 ports with 2 removable, self powered [...] ugen0.4: <VIA Labs, Inc. USB2.0 Hub> at usbus0 [...] uhub2 on uhub1 [...] uhub2: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/d.23, addr 3> on usbus0 [...] uhub2: MTT enabled [...] uhub2: 4 ports with 3 removable, self powered [...] ugen0.5: <Lenovo USB2.0 Hub> at usbus0 [...] uhub3 on uhub2 [...] uhub3: <Lenovo USB2.0 Hub, class 9/0, rev 2.00/60.70, addr 4> on usbus0 [...] uhub3: 4 ports with 2 removable, self powered [...] ugen0.6: <Cypress Semiconductor 40AS> at usbus0 [...] uhid0 on uhub3 [...] uhid0: <Cypress Semiconductor 40AS, class 0/0, rev 2.01/0.00, addr 5> on usbus0 [...] ugen0.7: <Lenovo ThinkPad USB-C Dock Gen2 USB Audio> at usbus0 [...] uaudio0 on uhub3 [...] uaudio0: <Lenovo ThinkPad USB-C Dock Gen2 USB Audio, class 239/2, rev 2.00/0.43, addr 6> on usbus0 [...] uaudio0: Play[0]: 48000 Hz, 2 ch, 24-bit S-LE PCM format, 2x4ms buffer. (selected) [...] uaudio0: Play[0]: 44100 Hz, 2 ch, 24-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Play[0]: 32000 Hz, 2 ch, 24-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Play[0]: 16000 Hz, 2 ch, 24-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Play[0]: 8000 Hz, 2 ch, 24-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Record[0]: 48000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. (selected) [...] uaudio0: Record[0]: 44100 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Record[0]: 32000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Record[0]: 16000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Record[0]: 8000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: No MIDI sequencer. [...] pcm3 on uaudio0 [...] uaudio0: No HID volume keys found. [...] uhid1 on uhub3 [...] uhid1: <Lenovo ThinkPad USB-C Dock Gen2 USB Audio, class 239/2, rev 2.00/0.43, addr 6> on usbus0 [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 7> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.9: <Chicony Electronics Co.,Ltd. Integrated Camera> at usbus0 [...] ugen0.10: <vendor 0x06cb product 0x00bd> at usbus0 [...] ugen0.11: <vendor 0x8087 product 0x0aaa> at usbus0 [...] ugen0.12: <VIA Labs, Inc. USB3.1 Hub> at usbus0 [...] uhub4 on uhub0 [...] uhub4: <VIA Labs, Inc. USB3.1 Hub, class 9/0, rev 3.10/d.24, addr 11> on usbus0 [...] uhub4: 4 ports with 2 removable, self powered [...] ugen0.13: <Realtek USB-C Dock Ethernet> at usbus0 [...] ure0 on uhub4 [...] ure0: <Realtek USB-C Dock Ethernet, class 0/0, rev 3.00/31.03, addr 12> on usbus0 [...] miibus0: <MII bus> on ure0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 0 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto [...] ue0: <USB Ethernet> on ure0 [...] ue0: Ethernet address: ... [...] ue0: link state changed to DOWN [...] ugen0.14: <VIA Labs, Inc. USB3.1 Hub> at usbus0 [...] uhub5 on uhub4 [...] uhub5: <VIA Labs, Inc. USB3.1 Hub, class 9/0, rev 3.10/d.23, addr 13> on usbus0 [...] uhub5: 4 ports with 3 removable, self powered [...] ubt0 on uhub0 [...] ubt0: <vendor 0x8087 product 0x0aaa, class 224/1, rev 2.00/0.02, addr 10> on usbus0 [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 7 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 14> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 14 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 15> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 15 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 16> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 16 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 17> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 17 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 18> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 18 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 19> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 19 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 20> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 20 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 21> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 21 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 22> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] pid 2310 (ksecretd), jid 0, uid 1001: exited on signal 6 (no core dump - other error) [...] pid 2077 (polkit-kde-authenti), jid 0, uid 1001: exited on signal 10 (no core dump - bad address) [...] pid 2076 (plasmashell), jid 0, uid 1001: exited on signal 11 (core dumped) [...] pid 6119 (plasmashell), jid 0, uid 1001: exited on signal 6 (core dumped) [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 22 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 23> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] wlan0: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 done [...] All buffers synced. [...] Uptime: 57m59s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE releng/14.3-n271432-8c9ce319fef7 GENERIC amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] VT(efifb): resolution 1920x1080 [...] CPU: Intel(R) Core(TM) i7-8665U CPU @ 1.90GHz (2100.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x806ec Family=0x6 Model=0x8e Stepping=12 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xbc000e00<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xa0a0cab<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TSX_CTRL> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16374587392 (15616 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <LENOVO TP-N2J > [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 6 4 2 3 5 7 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x984f5000-0x984f5017 [...] smbios0: Entry point: v3 (64-bit), Version: 3.1 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <LENOVO TP-N2J> [...] Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.RP07.BRST], AE_ALREADY_EXISTS (20221020/dswload2-480) [...] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20221020/psobject-372) [...] Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.RP07.RSTX], AE_ALREADY_EXISTS (20221020/dswload2-480) [...] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20221020/psobject-372) [...] Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.RP07.RSTG], AE_ALREADY_EXISTS (20221020/dswload2-480) [...] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20221020/psobject-372) [...] Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.RP07.PXSX.L850], AE_ALREADY_EXISTS (20221020/dswload2-480) [...] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20221020/psobject-372) [...] Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.RP07.PXSX._RST], AE_ALREADY_EXISTS (20221020/dswload2-480) [...] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20221020/psobject-372) [...] acpi_ec0: <Embedded Controller: GPE 0x16, ECDT> port 0x62,0x66 on acpi0 [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xb0000000-0xb0ffffff,0xa0000000-0xafffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xb2720000-0xb272ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <network> at device 20.3 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <unknown> at device 0.0 (no driver attached) [...] pcib2: <ACPI PCI-PCI bridge> at device 28.4 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 29.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] nvme0: <Generic NVMe Device> mem 0xb1b00000-0xb1b03fff at device 0.0 on pci4 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Cannon Lake HDA Controller> mem 0xb273c000-0xb273ffff,0xb1a00000-0xb1afffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] em0: <Intel(R) I219-LM CNP(6)> mem 0xb2700000-0xb271ffff at device 31.6 on pci0 [...] em0: EEPROM V0.4-3 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 15.0. [...] psm0: model Elantech Touchpad, device ID 0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_ibm0: <ThinkPad ACPI Extras> on acpi0 [...] acpi_ibm0: Firmware version is 0x200 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] cpufreq0: <CPU frequency control> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] cpufreq1: <CPU frequency control> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] cpufreq2: <CPU frequency control> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] cpufreq3: <CPU frequency control> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] cpufreq4: <CPU frequency control> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] cpufreq5: <CPU frequency control> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] cpufreq6: <CPU frequency control> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] cpufreq7: <CPU frequency control> on cpu7 [...] Timecounter "TSC" frequency 2112001078 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] hdacc0: <Realtek ALC257 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC257 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC257 (Analog 2.0+HP/2.0)> at nid 20,33 and 18 on hdaa0 [...] pcm1: <Realtek ALC257 (Right Analog Mic)> at nid 25 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] nda0 at nvme0 bus 0 scbus0 target 0 lun 1 [...] nda0: <Sabrent RKT343.4 7D55071708A600004935> [...] nda0: Serial Number... [...] nda0: nvme version 1.3 [...] nda0: 976762MB (2000409264 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 18 ports with 18 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <Generic EMV Smartcard Reader> at usbus0 [...] ugen0.3: <VIA Labs, Inc. USB2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/d.24, addr 2> on usbus0 [...] uhub1: MTT enabled [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] uhub1: 4 ports with 2 removable, self powered [...] ugen0.4: <VIA Labs, Inc. USB2.0 Hub> at usbus0 [...] uhub2 on uhub1 [...] uhub2: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/d.23, addr 3> on usbus0 [...] uhub2: MTT enabled [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] uhub2: 4 ports with 3 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.5: <Lenovo USB2.0 Hub> at usbus0 [...] uhub3 on uhub2 [...] uhub3: <Lenovo USB2.0 Hub, class 9/0, rev 2.00/60.70, addr 4> on usbus0 [...] uhub3: 4 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.6: <Cypress Semiconductor 40AS> at usbus0 [...] ugen0.7: <Lenovo ThinkPad USB-C Dock Gen2 USB Audio> at usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] ugen0.9: <Chicony Electronics Co.,Ltd. Integrated Camera> at usbus0 [...] ugen0.10: <vendor 0x06cb product 0x00bd> at usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.11: <vendor 0x8087 product 0x0aaa> at usbus0 [...] ugen0.12: <VIA Labs, Inc. USB3.1 Hub> at usbus0 [...] uhub4 on uhub0 [...] uhub4: <VIA Labs, Inc. USB3.1 Hub, class 9/0, rev 3.10/d.24, addr 11> on usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] uhub4: 4 ports with 2 removable, self powered [...] ugen0.13: <Realtek USB-C Dock Ethernet> at usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.14: <VIA Labs, Inc. USB3.1 Hub> at usbus0 [...] uhub5 on uhub4 [...] uhub5: <VIA Labs, Inc. USB3.1 Hub, class 9/0, rev 3.10/d.23, addr 13> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub5: 4 ports with 3 removable, self powered [...] [drm] Got Intel graphics stolen memory base 0x9d800000, size 0x2000000 [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] i915/kbl_dmc_ver1_04.bin: could not load binary firmware /boot/firmware/i915/kbl_dmc_ver1_04.bin either [...] kbl_dmc_ver1_04.bin: could not load binary firmware /boot/firmware/kbl_dmc_ver1_04.bin either [...] i915_kbl_dmc_ver1_04.bin: could not load binary firmware /boot/firmware/i915_kbl_dmc_ver1_04.bin either [...] lkpi_iic0: <LinuxKPI I2C> on drmn0 [...] iicbus0: <Philips I2C bus> on lkpi_iic0 [...] iic0: <I2C generic I/O> on iicbus0 [...] lkpi_iic1: <LinuxKPI I2C> on drmn0 [...] iicbus1: <Philips I2C bus> on lkpi_iic1 [...] iic1: <I2C generic I/O> on iicbus1 [...] lkpi_iic2: <LinuxKPI I2C> on drmn0 [...] iicbus2: <Philips I2C bus> on lkpi_iic2 [...] iic2: <I2C generic I/O> on iicbus2 [...] lkpi_iic3: <LinuxKPI I2C> on drmn0 [...] iicbus3: <Philips I2C bus> on lkpi_iic3 [...] iic3: <I2C generic I/O> on iicbus3 [...] drmn0: successfully loaded firmware image 'i915/kbl_dmc_ver1_04.bin' [...] drmn0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [...] sysctl_add_oid: can't re-use a leaf (hw.dri.debug)! [...] lkpi_iic4: <LinuxKPI I2C> on drm1 [...] iicbus4: <Philips I2C bus> on lkpi_iic4 [...] iic4: <I2C generic I/O> on iicbus4 [...] lkpi_iic5: <LinuxKPI I2C> on drm2 [...] iicbus5: <Philips I2C bus> on lkpi_iic5 [...] iic5: <I2C generic I/O> on iicbus5 [...] lkpi_iic6: <LinuxKPI I2C> on drm4 [...] iicbus6: <Philips I2C bus> on lkpi_iic6 [...] iic6: <I2C generic I/O> on iicbus6 [...] [drm] Initialized i915 1.6.0 20201103 for drmn0 on minor 0 [...] VT: Replacing driver "efifb" with new "drmfb". [...] start FB_INFO: [...] height=1080 width=1920 depth=32 [...] pbase=0xa0000000 vbase=0xfffff800a0000000 [...] name=drmn0 id=i915drmfb flags=0x0 stride=7680 [...] end FB_INFO [...] Intel(R) Wireless WiFi based driver for FreeBSD [...] pchtherm0: <CannonLake-LP Thermal Subsystem> mem 0xb2743000-0xb2743fff at device 18.0 on pci0 [...] iwm0: <Intel(R) Dual Band Wireless AC 9560> mem 0xb2738000-0xb273bfff at device 20.3 on pci0 [...] iwm0: hw rev 0x310, fw ver 34.3125811985.0, address XXX [...] rtsx0: <2.1g Realtek RTS522A PCIe SD Card Reader> mem 0xb2600000-0xb2600fff at device 0.0 on pci1 [...] rtsx0: A card is detected [...] mmc0: <MMC/SD bus> on rtsx0 [...] rtsx0: Controller timeout for CMD8 [...] rtsx0: Controller timeout for CMD8 [...] rtsx0: Controller timeout for CMD8 [...] rtsx0: Controller timeout for CMD8 [...] rtsx0: Controller timeout for CMD55 [...] rtsx0: Controller timeout for CMD55 [...] rtsx0: Controller timeout for CMD55 [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] rtsx0: Controller timeout for CMD55 [...] rtsx0: Controller timeout for CMD1 [...] rtsx0: Controller timeout for CMD1 [...] rtsx0: Controller timeout for CMD1 [...] rtsx0: Controller timeout for CMD1 [...] mmc0: No compatible cards found on bus [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi3: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi3: Embedded MOF found [...] ACPI: \134_SB.WMI1.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi4: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi4: Embedded MOF found [...] ACPI: \134_SB.WMI2.WQBB: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi5: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi5: Embedded MOF found [...] ACPI: \134_SB.WMI3.WQBC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi6: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi6: Embedded MOF found [...] ACPI: \134_SB.WMI4.WQC1: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] wlan0: link state changed to UP [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] uhid0 on uhub3 [...] uhid0: <Cypress Semiconductor 40AS, class 0/0, rev 2.01/0.00, addr 5> on usbus0 [...] uhid1 on uhub3 [...] uhid1: <Lenovo ThinkPad USB-C Dock Gen2 USB Audio, class 239/2, rev 2.00/0.43, addr 6> on usbus0 [...] uaudio0 on uhub3 [...] uaudio0: <Lenovo ThinkPad USB-C Dock Gen2 USB Audio, class 239/2, rev 2.00/0.43, addr 6> on usbus0 [...] uaudio0: Play[0]: 48000 Hz, 2 ch, 24-bit S-LE PCM format, 2x4ms buffer. (selected) [...] uaudio0: Play[0]: 44100 Hz, 2 ch, 24-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Play[0]: 32000 Hz, 2 ch, 24-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Play[0]: 16000 Hz, 2 ch, 24-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Play[0]: 8000 Hz, 2 ch, 24-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Record[0]: 48000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. (selected) [...] uaudio0: Record[0]: 44100 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Record[0]: 32000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Record[0]: 16000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Record[0]: 8000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: No MIDI sequencer. [...] pcm3 on uaudio0 [...] uaudio0: No HID volume keys found. [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 15> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] Cuse v0.1.37 @ /dev/cuse [...] ubt0 on uhub0 [...] ubt0: <vendor 0x8087 product 0x0aaa, class 224/1, rev 2.00/0.02, addr 10> on usbus0 [...] ure0 on uhub4 [...] ure0: <Realtek USB-C Dock Ethernet, class 0/0, rev 3.00/31.03, addr 12> on usbus0 [...] miibus0: <MII bus> on ure0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 0 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto [...] ue0: <USB Ethernet> on ure0 [...] ue0: Ethernet address: ... [...] ue0: link state changed to DOWN [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 15 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 16> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 16 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 17> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 17 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 18> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 18 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 19> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 19 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 20> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 20 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 21> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 21 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 22> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 22 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 23> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 23 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 24> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 24 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 25> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 25 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 26> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 26 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 27> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 27 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 28> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 28 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 29> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 29 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 30> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 30 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 31> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 31 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 32> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 32 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 33> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 33 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 34> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 34 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 35> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 35 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 36> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 36 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 37> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 37 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 38> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 38 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 39> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 39 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 40> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 40 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 41> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 41 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 42> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 42 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 43> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 43 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 44> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 44 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 45> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 45 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 46> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 46 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 47> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 47 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 48> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 48 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 49> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 49 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 50> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 50 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 51> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 51 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 52> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 52 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 53> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 53 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 54> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 54 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 55> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 55 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 56> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 56 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 57> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 57 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 58> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 58 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 59> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 59 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 60> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 60 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 61> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 61 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 62> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 62 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 63> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 63 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 64> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 64 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 7> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 7 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 14> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 14 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 15> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 15 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 16> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 16 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 17> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 17 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 18> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 18 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 19> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 19 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 20> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 20 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 21> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 21 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 22> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 22 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 23> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 23 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 24> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 24 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 25> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 25 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 26> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 26 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 27> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 27 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 28> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 28 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 29> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 29 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 30> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 30 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 31> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 31 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 32> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 32 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 33> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 33 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 34> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 34 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 35> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 35 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 36> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 36 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 37> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 37 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 38> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 38 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 39> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 39 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 40> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 40 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 41> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 41 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 42> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 42 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 43> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 43 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 44> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 44 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 45> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 45 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 46> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 46 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 47> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 47 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 48> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 48 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 49> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 49 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 50> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] rtsx0: Suspend [...] wlan0: link state changed to DOWN [...] uhub0: at usbus0, port 1, addr 1 (disconnected) [...] ugen0.2: <Generic EMV Smartcard Reader> at usbus0 (disconnected) [...] ugen0.3: <VIA Labs, Inc. USB2.0 Hub> at usbus0 (disconnected) [...] uhub1: at uhub0, port 2, addr 2 (disconnected) [...] ugen0.4: <VIA Labs, Inc. USB2.0 Hub> at usbus0 (disconnected) [...] uhub2: at uhub1, port 3, addr 3 (disconnected) [...] ugen0.5: <Lenovo USB2.0 Hub> at usbus0 (disconnected) [...] uhub3: at uhub2, port 3, addr 4 (disconnected) [...] ugen0.6: <Cypress Semiconductor 40AS> at usbus0 (disconnected) [...] uhid0: at uhub3, port 1, addr 5 (disconnected) [...] uhid0: detached [...] ugen0.7: <Lenovo ThinkPad USB-C Dock Gen2 USB Audio> at usbus0 (disconnected) [...] uaudio0: at uhub3, port 2, addr 6 (disconnected) [...] pcm3: detached [...] uaudio0: detached [...] uhid1: at uhub3, port 2, addr 6 (disconnected) [...] uhid1: detached [...] uhub3: detached [...] uhub2: detached [...] uhub1: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 50 (disconnected) [...] umodem0: detached [...] ugen0.9: <Chicony Electronics Co.,Ltd. Integrated Camera> at usbus0 (disconnected) [...] ugen0.10: <vendor 0x06cb product 0x00bd> at usbus0 (disconnected) [...] ugen0.11: <vendor 0x8087 product 0x0aaa> at usbus0 (disconnected) [...] ubt0: at uhub0, port 10, addr 10 (disconnected) [...] ubt0: detached [...] ugen0.12: <VIA Labs, Inc. USB3.1 Hub> at usbus0 (disconnected) [...] uhub4: at uhub0, port 14, addr 11 (disconnected) [...] ugen0.13: <Realtek USB-C Dock Ethernet> at usbus0 (disconnected) [...] ure0: at uhub4, port 1, addr 12 (disconnected) [...] rgephy0: detached [...] miibus0: detached [...] ure0: detached [...] ugen0.14: <VIA Labs, Inc. USB3.1 Hub> at usbus0 (disconnected) [...] uhub5: at uhub4, port 3, addr 13 (disconnected) [...] uhub5: detached [...] uhub4: detached [...] uhub0: detached [...] vgapci0: child drmn0 requested pci_set_powerstate [...] pci0: failed to set ACPI power state D3 on \134_SB_.PCI0.GFX0: AE_BAD_PARAMETER [...] acpi0: cleared fixed power button status [...] vgapci0: child drmn0 requested pci_set_powerstate [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] drmn0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it [...] drmn0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it [...] drmn0: [drm] [ENCODER:117:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it [...] rtsx0: Resume [...] rtsx0: Controller timeout for CMD8 [...] rtsx0: Controller timeout for CMD8 [...] rtsx0: Controller timeout for CMD8 [...] rtsx0: Controller timeout for CMD8 [...] rtsx0: Controller timeout for CMD55 [...] rtsx0: Controller timeout for CMD55 [...] rtsx0: Controller timeout for CMD55 [...] rtsx0: Controller timeout for CMD55 [...] rtsx0: Controller timeout for CMD1 [...] rtsx0: Controller timeout for CMD1 [...] rtsx0: Controller timeout for CMD1 [...] rtsx0: Controller timeout for CMD1 [...] mmc0: No compatible cards found on bus [...] nvme0: resubmitting queued i/o [...] nvme0: WRITE sqid:3 cid:0 nsid:1 lba:53108136 len:8 [...] nvme0: WRITE sqid:3 cid:0 nsid:1 lba:1930435816 len:8 [...] nvme0: done resubmitting i/o [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub0: 18 ports with 18 removable, self powered [...] ugen0.2: <Generic EMV Smartcard Reader> at usbus0 [...] ugen0.3: <VIA Labs, Inc. USB2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/d.24, addr 2> on usbus0 [...] uhub1: MTT enabled [...] wlan0: link state changed to UP [...] uhub1: 4 ports with 2 removable, self powered [...] ugen0.4: <VIA Labs, Inc. USB2.0 Hub> at usbus0 [...] uhub2 on uhub1 [...] uhub2: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/d.23, addr 3> on usbus0 [...] uhub2: MTT enabled [...] uhub2: 4 ports with 3 removable, self powered [...] ugen0.5: <Lenovo USB2.0 Hub> at usbus0 [...] uhub3 on uhub2 [...] uhub3: <Lenovo USB2.0 Hub, class 9/0, rev 2.00/60.70, addr 4> on usbus0 [...] uhub3: 4 ports with 2 removable, self powered [...] ugen0.6: <Cypress Semiconductor 40AS> at usbus0 [...] uhid0 on uhub3 [...] uhid0: <Cypress Semiconductor 40AS, class 0/0, rev 2.01/0.00, addr 5> on usbus0 [...] ugen0.7: <Lenovo ThinkPad USB-C Dock Gen2 USB Audio> at usbus0 [...] uaudio0 on uhub3 [...] uaudio0: <Lenovo ThinkPad USB-C Dock Gen2 USB Audio, class 239/2, rev 2.00/0.43, addr 6> on usbus0 [...] uaudio0: Play[0]: 48000 Hz, 2 ch, 24-bit S-LE PCM format, 2x4ms buffer. (selected) [...] uaudio0: Play[0]: 44100 Hz, 2 ch, 24-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Play[0]: 32000 Hz, 2 ch, 24-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Play[0]: 16000 Hz, 2 ch, 24-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Play[0]: 8000 Hz, 2 ch, 24-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Record[0]: 48000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. (selected) [...] uaudio0: Record[0]: 44100 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Record[0]: 32000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Record[0]: 16000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Record[0]: 8000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: No MIDI sequencer. [...] pcm3 on uaudio0 [...] uaudio0: No HID volume keys found. [...] uhid1 on uhub3 [...] uhid1: <Lenovo ThinkPad USB-C Dock Gen2 USB Audio, class 239/2, rev 2.00/0.43, addr 6> on usbus0 [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 7> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.9: <Chicony Electronics Co.,Ltd. Integrated Camera> at usbus0 [...] ugen0.10: <vendor 0x06cb product 0x00bd> at usbus0 [...] ugen0.11: <vendor 0x8087 product 0x0aaa> at usbus0 [...] ugen0.12: <VIA Labs, Inc. USB3.1 Hub> at usbus0 [...] uhub4 on uhub0 [...] uhub4: <VIA Labs, Inc. USB3.1 Hub, class 9/0, rev 3.10/d.24, addr 11> on usbus0 [...] uhub4: 4 ports with 2 removable, self powered [...] ugen0.13: <Realtek USB-C Dock Ethernet> at usbus0 [...] ure0 on uhub4 [...] ure0: <Realtek USB-C Dock Ethernet, class 0/0, rev 3.00/31.03, addr 12> on usbus0 [...] miibus0: <MII bus> on ure0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 0 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto [...] ue0: <USB Ethernet> on ure0 [...] ue0: Ethernet address: ... [...] ue0: link state changed to DOWN [...] ugen0.14: <VIA Labs, Inc. USB3.1 Hub> at usbus0 [...] uhub5 on uhub4 [...] uhub5: <VIA Labs, Inc. USB3.1 Hub, class 9/0, rev 3.10/d.23, addr 13> on usbus0 [...] uhub5: 4 ports with 3 removable, self powered [...] ubt0 on uhub0 [...] ubt0: <vendor 0x8087 product 0x0aaa, class 224/1, rev 2.00/0.02, addr 10> on usbus0 [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 7 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 14> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 14 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 15> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 15 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 16> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 16 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 17> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 17 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 18> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 18 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 19> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 19 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 20> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 20 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 21> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 21 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 22> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 22 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 23> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 23 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 24> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 24 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 25> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 25 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 26> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 26 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 27> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 27 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 28> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 28 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 29> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 29 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 30> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 30 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 31> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 31 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 32> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 32 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 33> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 33 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 34> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 34 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 35> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] pid 2850 (ksecretd), jid 0, uid 1001: exited on signal 11 (no core dump - other error) [...] pid 2792 (polkit-kde-authenti), jid 0, uid 1001: exited on signal 10 (no core dump - bad address) [...] wlan0: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 done [...] All buffers synced. [...] Uptime: 29m34s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE releng/14.3-n271432-8c9ce319fef7 GENERIC amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] VT(efifb): resolution 1920x1080 [...] CPU: Intel(R) Core(TM) i7-8665U CPU @ 1.90GHz (2100.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x806ec Family=0x6 Model=0x8e Stepping=12 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xbc000e00<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xa0a0cab<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TSX_CTRL> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16374587392 (15616 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <LENOVO TP-N2J > [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 4 2 6 7 3 5 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x984f5000-0x984f5017 [...] smbios0: Entry point: v3 (64-bit), Version: 3.1 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <LENOVO TP-N2J> [...] Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.RP07.BRST], AE_ALREADY_EXISTS (20221020/dswload2-480) [...] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20221020/psobject-372) [...] Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.RP07.RSTX], AE_ALREADY_EXISTS (20221020/dswload2-480) [...] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20221020/psobject-372) [...] Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.RP07.RSTG], AE_ALREADY_EXISTS (20221020/dswload2-480) [...] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20221020/psobject-372) [...] Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.RP07.PXSX.L850], AE_ALREADY_EXISTS (20221020/dswload2-480) [...] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20221020/psobject-372) [...] Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.RP07.PXSX._RST], AE_ALREADY_EXISTS (20221020/dswload2-480) [...] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20221020/psobject-372) [...] acpi_ec0: <Embedded Controller: GPE 0x16, ECDT> port 0x62,0x66 on acpi0 [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xb0000000-0xb0ffffff,0xa0000000-0xafffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xb2720000-0xb272ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <network> at device 20.3 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <unknown> at device 0.0 (no driver attached) [...] pcib2: <ACPI PCI-PCI bridge> at device 28.4 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 29.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] nvme0: <Generic NVMe Device> mem 0xb1b00000-0xb1b03fff at device 0.0 on pci4 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Cannon Lake HDA Controller> mem 0xb273c000-0xb273ffff,0xb1a00000-0xb1afffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] em0: <Intel(R) I219-LM CNP(6)> mem 0xb2700000-0xb271ffff at device 31.6 on pci0 [...] em0: EEPROM V0.4-3 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 15.0. [...] psm0: model Elantech Touchpad, device ID 0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_ibm0: <ThinkPad ACPI Extras> on acpi0 [...] acpi_ibm0: Firmware version is 0x200 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] cpufreq0: <CPU frequency control> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] cpufreq1: <CPU frequency control> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] cpufreq2: <CPU frequency control> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] cpufreq3: <CPU frequency control> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] cpufreq4: <CPU frequency control> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] cpufreq5: <CPU frequency control> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] cpufreq6: <CPU frequency control> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] cpufreq7: <CPU frequency control> on cpu7 [...] Timecounter "TSC" frequency 2112002705 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] hdacc0: <Realtek ALC257 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC257 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC257 (Analog 2.0+HP/2.0)> at nid 20,33 and 18 on hdaa0 [...] pcm1: <Realtek ALC257 (Right Analog Mic)> at nid 25 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] nda0 at nvme0 bus 0 scbus0 target 0 lun 1 [...] nda0: <Sabrent RKT343.4 7D55071708A600004935> [...] nda0: Serial Number... [...] nda0: nvme version 1.3 [...] nda0: 976762MB (2000409264 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 18 ports with 18 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <Generic EMV Smartcard Reader> at usbus0 [...] ugen0.3: <VIA Labs, Inc. USB2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/d.24, addr 2> on usbus0 [...] uhub1: MTT enabled [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] uhub1: 4 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.4: <VIA Labs, Inc. USB2.0 Hub> at usbus0 [...] uhub2 on uhub1 [...] uhub2: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/d.23, addr 3> on usbus0 [...] uhub2: MTT enabled [...] Root mount waiting for: usbus0 [...] uhub2: 4 ports with 3 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.5: <Lenovo USB2.0 Hub> at usbus0 [...] uhub3 on uhub2 [...] uhub3: <Lenovo USB2.0 Hub, class 9/0, rev 2.00/60.70, addr 4> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub3: 4 ports with 2 removable, self powered [...] ugen0.6: <Cypress Semiconductor 40AS> at usbus0 [...] ugen0.7: <Lenovo ThinkPad USB-C Dock Gen2 USB Audio> at usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] ugen0.9: <Chicony Electronics Co.,Ltd. Integrated Camera> at usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.10: <vendor 0x06cb product 0x00bd> at usbus0 [...] ugen0.11: <vendor 0x8087 product 0x0aaa> at usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.12: <VIA Labs, Inc. USB3.1 Hub> at usbus0 [...] uhub4 on uhub0 [...] uhub4: <VIA Labs, Inc. USB3.1 Hub, class 9/0, rev 3.10/d.24, addr 11> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub4: 4 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.13: <Realtek USB-C Dock Ethernet> at usbus0 [...] ugen0.14: <VIA Labs, Inc. USB3.1 Hub> at usbus0 [...] uhub5 on uhub4 [...] uhub5: <VIA Labs, Inc. USB3.1 Hub, class 9/0, rev 3.10/d.23, addr 13> on usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] uhub5: 4 ports with 3 removable, self powered [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] [drm] Got stolen memory base 0x9d800000, size 0x2000000 [...] i915/kbl_dmc_ver1_04.bin: could not load binary firmware /boot/firmware/i915/kbl_dmc_ver1_04.bin either [...] kbl_dmc_ver1_04.bin: could not load binary firmware /boot/firmware/kbl_dmc_ver1_04.bin either [...] i915_kbl_dmc_ver1_04.bin: could not load binary firmware /boot/firmware/i915_kbl_dmc_ver1_04.bin either [...] drmn0: successfully loaded firmware image 'i915/kbl_dmc_ver1_04.bin' [...] lkpi_iic0: <LinuxKPI I2C> on drmn0 [...] iicbus0: <Philips I2C bus> on lkpi_iic0 [...] drmn0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [...] iic0: <I2C generic I/O> on iicbus0 [...] lkpi_iic1: <LinuxKPI I2C> on drmn0 [...] iicbus1: <Philips I2C bus> on lkpi_iic1 [...] iic1: <I2C generic I/O> on iicbus1 [...] lkpi_iic2: <LinuxKPI I2C> on drmn0 [...] iicbus2: <Philips I2C bus> on lkpi_iic2 [...] iic2: <I2C generic I/O> on iicbus2 [...] lkpi_iic3: <LinuxKPI I2C> on drmn0 [...] iicbus3: <Philips I2C bus> on lkpi_iic3 [...] iic3: <I2C generic I/O> on iicbus3 [...] sysctl_add_oid: can't re-use a leaf (hw.dri.debug)! [...] lkpi_iic4: <LinuxKPI I2C> on drm1 [...] iicbus4: <Philips I2C bus> on lkpi_iic4 [...] iic4: <I2C generic I/O> on iicbus4 [...] lkpi_iic5: <LinuxKPI I2C> on drm2 [...] iicbus5: <Philips I2C bus> on lkpi_iic5 [...] iic5: <I2C generic I/O> on iicbus5 [...] lkpi_iic6: <LinuxKPI I2C> on drm4 [...] iicbus6: <Philips I2C bus> on lkpi_iic6 [...] iic6: <I2C generic I/O> on iicbus6 [...] [drm] Initialized i915 1.6.0 20201103 for drmn0 on minor 0 [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] pbase=0xa0000000 vbase=0xfffff800a0000000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] end FB_INFO [...] Intel(R) Wireless WiFi based driver for FreeBSD [...] pchtherm0: <CannonLake-LP Thermal Subsystem> mem 0xb2743000-0xb2743fff at device 18.0 on pci0 [...] iwm0: <Intel(R) Dual Band Wireless AC 9560> mem 0xb2738000-0xb273bfff at device 20.3 on pci0 [...] iwm0: hw rev 0x310, fw ver 34.3125811985.0, address XXX [...] rtsx0: <2.1g Realtek RTS522A PCIe SD Card Reader> mem 0xb2600000-0xb2600fff at device 0.0 on pci1 [...] rtsx0: A card is detected [...] mmc0: <MMC/SD bus> on rtsx0 [...] rtsx0: Controller timeout for CMD8 [...] rtsx0: Controller timeout for CMD8 [...] rtsx0: Controller timeout for CMD8 [...] rtsx0: Controller timeout for CMD8 [...] rtsx0: Controller timeout for CMD55 [...] rtsx0: Controller timeout for CMD55 [...] rtsx0: Controller timeout for CMD55 [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] rtsx0: Controller timeout for CMD55 [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] rtsx0: Controller timeout for CMD1 [...] rtsx0: Controller timeout for CMD1 [...] rtsx0: Controller timeout for CMD1 [...] rtsx0: Controller timeout for CMD1 [...] mmc0: No compatible cards found on bus [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi3: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi3: Embedded MOF found [...] ACPI: \134_SB.WMI1.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi4: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi4: Embedded MOF found [...] ACPI: \134_SB.WMI2.WQBB: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi5: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi5: Embedded MOF found [...] ACPI: \134_SB.WMI3.WQBC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi6: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi6: Embedded MOF found [...] ACPI: \134_SB.WMI4.WQC1: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] wlan0: link state changed to UP [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] uhid0 on uhub3 [...] uhid0: <Cypress Semiconductor 40AS, class 0/0, rev 2.01/0.00, addr 5> on usbus0 [...] uhid1 on uhub3 [...] uhid1: <Lenovo ThinkPad USB-C Dock Gen2 USB Audio, class 239/2, rev 2.00/0.43, addr 6> on usbus0 [...] uaudio0 on uhub3 [...] uaudio0: <Lenovo ThinkPad USB-C Dock Gen2 USB Audio, class 239/2, rev 2.00/0.43, addr 6> on usbus0 [...] uaudio0: Play[0]: 48000 Hz, 2 ch, 24-bit S-LE PCM format, 2x4ms buffer. (selected) [...] uaudio0: Play[0]: 44100 Hz, 2 ch, 24-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Play[0]: 32000 Hz, 2 ch, 24-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Play[0]: 16000 Hz, 2 ch, 24-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Play[0]: 8000 Hz, 2 ch, 24-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Record[0]: 48000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. (selected) [...] uaudio0: Record[0]: 44100 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Record[0]: 32000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Record[0]: 16000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Record[0]: 8000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: No MIDI sequencer. [...] pcm3 on uaudio0 [...] uaudio0: No HID volume keys found. [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 15> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] Cuse v0.1.37 @ /dev/cuse [...] ubt0 on uhub0 [...] ubt0: <vendor 0x8087 product 0x0aaa, class 224/1, rev 2.00/0.02, addr 10> on usbus0 [...] ure0 on uhub4 [...] ure0: <Realtek USB-C Dock Ethernet, class 0/0, rev 3.00/31.03, addr 12> on usbus0 [...] miibus0: <MII bus> on ure0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 0 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto [...] ue0: <USB Ethernet> on ure0 [...] ue0: Ethernet address: ... [...] ue0: link state changed to DOWN [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 15 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 16> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 (disconnected) [...] umodem0: at uhub0, port 7, addr 16 (disconnected) [...] umodem0: detached [...] ugen0.8: <FIBOCOM L830-EB-00> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <FIBOCOM L830-EB-00, class 239/2, rev 2.00/3.33, addr 17> on usbus0 [...] umodem0: data interface 3, has no CM over data, has break