[...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE GENERIC amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(efifb): resolution 1280x800 [...] CPU: Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz (1990.05-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x10676 Family=0x6 Model=0x17 Stepping=6 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x8e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] VT-x: HLT,PAUSE [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8001081344 (7630 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <APPLE Apple00> [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. [...] ioapic0: MADT APIC ID 1 != hw id 0 [...] ioapic0 <Version 1.1> irqs 0-23 [...] Launching APs: 1 [...] Timecounter "TSC" frequency 1990048012 Hz quality 1000 [...] random: entropy device external interface [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd0 at kbdmux0 [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] aesni0: No AES or SHA support. [...] acpi0: <APPLE Apple00> [...] acpi_ec0: <Embedded Controller: GPE 0x3f, ECDT> port 0x62,0x66 on acpi0 [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 25000000 Hz quality 950 [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <memory, RAM> at device 0.1 (no driver attached) [...] isab0: <PCI-ISA bridge> port 0x2000-0x20ff at device 3.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory, RAM> at device 3.1 (no driver attached) [...] pci0: <memory, RAM> at device 3.3 (no driver attached) [...] pci0: <memory, RAM> at device 3.4 (no driver attached) [...] pci0: <processor> at device 3.5 (no driver attached) [...] ohci0: <nVidia nForce MCP79 USB Controller> mem 0xd3388000-0xd3388fff at device 4.0 on pci0 [...] usbus0 on ohci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] ehci0: <NVIDIA nForce MCP79 USB 2.0 controller> mem 0xd3389200-0xd33892ff at device 4.1 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] ohci1: <nVidia nForce MCP79 USB Controller> mem 0xd3387000-0xd3387fff at device 6.0 on pci0 [...] usbus2 on ohci1 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci1: <NVIDIA nForce MCP79 USB 2.0 controller> mem 0xd3389100-0xd33891ff at device 6.1 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci1 [...] usbus3: 480Mbps High Speed USB v2.0 [...] hdac0: <NVIDIA MCP79 HDA Controller> mem 0xd3380000-0xd3383fff at device 8.0 on pci0 [...] pcib1: <PCI-PCI bridge> at device 9.0 on pci0 [...] pci1: <PCI bus> on pcib1 [...] nfe0: <NVIDIA nForce MCP79 Networking Adapter> port 0x21e0-0x21e7 mem 0xd3386000-0xd3386fff,0xd3389000-0xd33890ff,0xd3389300-0xd338930f at device 10.0 on pci0 [...] miibus0: <MII bus> on nfe0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] nfe0: Using defaults for TSO: 65518/35/2048 [...] nfe0: Ethernet address: ... [...] ahci0: <NVIDIA MCP79 AHCI SATA controller> port 0x21d8-0x21df,0x21ec-0x21ef,0x21d0-0x21d7,0x21e8-0x21eb,0x21c0-0x21cf mem 0xd3384000-0xd3385fff at device 11.0 on pci0 [...] ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x200<NOAA> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib2: <ACPI PCI-PCI bridge> at device 16.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] vgapci0: <VGA-compatible display> port 0x1000-0x107f mem 0xd2000000-0xd2ffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff at device 0.0 on pci2 [...] pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pci3: <network> at device 0.0 (no driver attached) [...] battery0: <ACPI Control Method Battery> on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen2.1: <nVidia OHCI root HUB> at usbus2 [...] ugen3.1: <nVidia EHCI root HUB> at usbus3 [...] uhub0 on usbus2 [...] uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] uhub1 on usbus3 [...] uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] ugen0.1: <nVidia OHCI root HUB> at usbus0 [...] ugen1.1: <nVidia EHCI root HUB> at usbus1 [...] uhub2 on usbus0 [...] uhub2: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] hdacc0: <Realtek ALC889A HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC889A Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC889A (Internal Analog 3.1/2.0)> at nid 24,26 and 25 on hdaa0 [...] pcm1: <Realtek ALC889A (Rear Analog)> at nid 20 and 21 on hdaa0 [...] pcm2: <Realtek ALC889A (Rear Digital)> at nid 30 and 31 on hdaa0 [...] pcm3: <Realtek ALC889A (Rear Analog Mic)> at nid 27 on hdaa0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SanDisk SDSSDH3512G X6107000> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 488386MB (1000215216 512 byte sectors) [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <MATSHITA DVD-R UJ-868 KB19> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA4, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] uhub3 on usbus1 [...] uhub3: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] Trying to mount root from zfs:Elrond/ROOT/default []... [...] uhub0: 5 ports with 5 removable, self powered [...] uhub2: 7 ports with 7 removable, self powered [...] Cuse v0.1.36 @ /dev/cuse [...] random: unblocking device. [...] uhub1: 5 ports with 5 removable, self powered [...] bwn_pci0: <Broadcom BCM4322 802.11n Dual-Band Wireless> mem 0xd3100000-0xd3103fff at device 0.0 on pci3 [...] bhndb0: <PCI-BHND bridge> on bwn_pci0 [...] bhndb0: Using MSI interrupts on bwn_pci0 [...] bhnd_nvram0: <SPROM/OTP> mem 0xd3101000-0xd3101fff on bhndb0 [...] bhnd0: <BCM4322 SIBA bus> on bhndb0 [...] bhnd_chipc0: <Broadcom ChipCommon I/O Controller, rev 23> mem 0x18000000-0x18000dff,0xffff0000-0xffffffff,0x1c000000-0x1dffffff,0x18000f00-0x18000fff,0x18000e00-0x18000eff irq 0 at core 0 on bhnd0 [...] bhnd_pmu0: <Broadcom ChipCommon PMU, rev 2> on bhnd_chipc0 [...] gpio0: <Broadcom ChipCommon GPIO> mem 0x18000000-0x18000dff on bhnd_chipc0 [...] bhnd_hostb0: <Broadcom PCIe-G1 Host-PCI bridge, rev 11> mem 0x18002000-0x18002dff,0-0x7fffffff,0x18002f00-0x18002fff,0x18002e00-0x18002eff irq 2 at core 2 on bhnd0 [...] bhnd0: <Broadcom Internal Memory, rev 3> mem 0x18006000-0x18006dff,0x1e000000-0x1e01ffff,0x18006f00-0x18006fff,0x18006e00-0x18006eff at core 6 (no driver attached) [...] bhnd0: <Broadcom unknown, rev 0> mem 0x18005000-0x18005dff,0x18005f00-0x18005fff,0x18005e00-0x18005eff irq 5 at core 5 (no driver attached) [...] bwn0: <Broadcom 802.11 MAC/PHY/Radio, rev 16> mem 0x18001000-0x18001dff,0x18001f00-0x18001fff,0x18001e00-0x18001eff irq 1 at core 1 on bhnd0 [...] bwn0: bwn_phy_n_attach: BWN_GPL_PHY not in kernel config; no PHY-N support [...] bwn0: failed [...] device_attach: bwn0 attach returned 6 [...] bhnd0: <Broadcom USB 2.0 Device Controller, rev 5> mem 0x18004000-0x18004dff,0x18004f00-0x18004fff,0x18004e00-0x18004eff irq 4 at core 4 (no driver attached) [...] bwn0: <Broadcom 802.11 MAC/PHY/Radio, rev 16> mem 0x18001000-0x18001dff,0x18001f00-0x18001fff,0x18001e00-0x18001eff irq 1 at core 1 on bhnd0 [...] bwn0: bwn_phy_n_attach: BWN_GPL_PHY not in kernel config; no PHY-N support [...] bwn0: failed [...] device_attach: bwn0 attach returned 6 [...] bwn0: <Broadcom 802.11 MAC/PHY/Radio, rev 16> mem 0x18001000-0x18001dff,0x18001f00-0x18001fff,0x18001e00-0x18001eff irq 1 at core 1 on bhnd0 [...] bwn0: bwn_phy_n_attach: BWN_GPL_PHY not in kernel config; no PHY-N support [...] bwn0: failed [...] device_attach: bwn0 attach returned 6 [...] bwn0: <Broadcom 802.11 MAC/PHY/Radio, rev 16> mem 0x18001000-0x18001dff,0x18001f00-0x18001fff,0x18001e00-0x18001eff irq 1 at core 1 on bhnd0 [...] bwn0: bwn_phy_n_attach: BWN_GPL_PHY not in kernel config; no PHY-N support [...] bwn0: failed [...] device_attach: bwn0 attach returned 6 [...] bwn0: <Broadcom 802.11 MAC/PHY/Radio, rev 16> mem 0x18001000-0x18001dff,0x18001f00-0x18001fff,0x18001e00-0x18001eff irq 1 at core 1 on bhnd0 [...] bwn0: bwn_phy_n_attach: BWN_GPL_PHY not in kernel config; no PHY-N support [...] bwn0: failed [...] device_attach: bwn0 attach returned 6 [...] bwn0: <Broadcom 802.11 MAC/PHY/Radio, rev 16> mem 0x18001000-0x18001dff,0x18001f00-0x18001fff,0x18001e00-0x18001eff irq 1 at core 1 on bhnd0 [...] bwn0: bwn_phy_n_attach: BWN_GPL_PHY not in kernel config; no PHY-N support [...] bwn0: failed [...] device_attach: bwn0 attach returned 6 [...] uhub3: 7 ports with 7 removable, self powered [...] lo0: link state changed to UP [...] ugen2.2: <Apple Inc. BRCM2046 Hub> at usbus2 [...] uhub4 on uhub0 [...] uhub4: <Apple Inc. BRCM2046 Hub, class 9/0, rev 2.00/1.00, addr 2> on usbus2 [...] ugen1.2: <Apple Inc. Built-in iSight> at usbus1 [...] uhub4: 3 ports with 0 removable, self powered [...] ugen2.3: <Apple Inc. Bluetooth USB Host Controller> at usbus2 [...] ugen0.2: <Apple Computer, Inc. IR Receiver> at usbus0 [...] nfe0: link state changed to DOWN [...] ugen0.3: <Apple, Inc. Apple Internal Keyboard / Trackpad> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <Apple Internal Keyboard> on usbus0 [...] kbd1 at ukbd0 [...] ubt0 on uhub4 [...] ubt0: <Apple Inc. Bluetooth USB Host Controller, rev 2.00/2.08, addr 3> on usbus2 [...] uhid0 on uhub2 [...] uhid0: <Apple Computer, Inc. IR Receiver, class 0/0, rev 2.00/0.16, addr 2> on usbus0 [...] uhid1 on uhub2 [...] uhid1: <Touchpad> on usbus0 [...] ums0 on uhub2 [...] ums0: <Touchpad> on usbus0 [...] ums0: 3 buttons and [XY] coordinates ID=2 [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] pid 2437 (gnome-keyring-daemo), jid 0, uid 1002: exited on signal 11 (core dumped) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] All buffers synced. [...] Uptime: 3m2s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE GENERIC amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(efifb): resolution 1280x800 [...] CPU: Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz (1990.05-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x10676 Family=0x6 Model=0x17 Stepping=6 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x8e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] VT-x: HLT,PAUSE [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8001085440 (7630 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <APPLE Apple00> [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. [...] ioapic0: MADT APIC ID 1 != hw id 0 [...] ioapic0 <Version 1.1> irqs 0-23 [...] Launching APs: 1 [...] Timecounter "TSC" frequency 1990051222 Hz quality 1000 [...] random: entropy device external interface [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd0 at kbdmux0 [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] aesni0: No AES or SHA support. [...] acpi0: <APPLE Apple00> [...] acpi_ec0: <Embedded Controller: GPE 0x3f, ECDT> port 0x62,0x66 on acpi0 [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 25000000 Hz quality 950 [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <memory, RAM> at device 0.1 (no driver attached) [...] isab0: <PCI-ISA bridge> port 0x2000-0x20ff at device 3.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory, RAM> at device 3.1 (no driver attached) [...] pci0: <memory, RAM> at device 3.3 (no driver attached) [...] pci0: <memory, RAM> at device 3.4 (no driver attached) [...] pci0: <processor> at device 3.5 (no driver attached) [...] ohci0: <nVidia nForce MCP79 USB Controller> mem 0xd3388000-0xd3388fff at device 4.0 on pci0 [...] usbus0 on ohci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] ehci0: <NVIDIA nForce MCP79 USB 2.0 controller> mem 0xd3389200-0xd33892ff at device 4.1 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] ohci1: <nVidia nForce MCP79 USB Controller> mem 0xd3387000-0xd3387fff at device 6.0 on pci0 [...] usbus2 on ohci1 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci1: <NVIDIA nForce MCP79 USB 2.0 controller> mem 0xd3389100-0xd33891ff at device 6.1 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci1 [...] usbus3: 480Mbps High Speed USB v2.0 [...] hdac0: <NVIDIA MCP79 HDA Controller> mem 0xd3380000-0xd3383fff at device 8.0 on pci0 [...] pcib1: <PCI-PCI bridge> at device 9.0 on pci0 [...] pci1: <PCI bus> on pcib1 [...] nfe0: <NVIDIA nForce MCP79 Networking Adapter> port 0x21e0-0x21e7 mem 0xd3386000-0xd3386fff,0xd3389000-0xd33890ff,0xd3389300-0xd338930f at device 10.0 on pci0 [...] miibus0: <MII bus> on nfe0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] nfe0: Using defaults for TSO: 65518/35/2048 [...] nfe0: Ethernet address: ... [...] ahci0: <NVIDIA MCP79 AHCI SATA controller> port 0x21d8-0x21df,0x21ec-0x21ef,0x21d0-0x21d7,0x21e8-0x21eb,0x21c0-0x21cf mem 0xd3384000-0xd3385fff at device 11.0 on pci0 [...] ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x200<NOAA> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib2: <ACPI PCI-PCI bridge> at device 16.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] vgapci0: <VGA-compatible display> port 0x1000-0x107f mem 0xd2000000-0xd2ffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff at device 0.0 on pci2 [...] pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pci3: <network> at device 0.0 (no driver attached) [...] battery0: <ACPI Control Method Battery> on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen1.1: <nVidia EHCI root HUB> at usbus1 [...] ugen2.1: <nVidia OHCI root HUB> at usbus2 [...] uhub0 on usbus1 [...] uhub0: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus2 [...] ugen3.1: <nVidia EHCI root HUB> at usbus3 [...] uhub1: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] ugen0.1: <nVidia OHCI root HUB> at usbus0 [...] uhub2 on usbus3 [...] uhub3 on usbus0 [...] uhub2: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub3: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] hdacc0: <Realtek ALC889A HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC889A Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC889A (Internal Analog 3.1/2.0)> at nid 24,26 and 25 on hdaa0 [...] pcm1: <Realtek ALC889A (Rear Analog)> at nid 20 and 21 on hdaa0 [...] pcm2: <Realtek ALC889A (Rear Digital)> at nid 30 and 31 on hdaa0 [...] pcm3: <Realtek ALC889A (Rear Analog Mic)> at nid 27 on hdaa0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SanDisk SDSSDH3512G X6107000> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 488386MB (1000215216 512 byte sectors) [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <MATSHITA DVD-R UJ-868 KB19> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA4, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] Trying to mount root from zfs:Elrond/ROOT/default []... [...] uhub1: 5 ports with 5 removable, self powered [...] uhub3: 7 ports with 7 removable, self powered [...] Cuse v0.1.36 @ /dev/cuse [...] random: unblocking device. [...] uhub2: 5 ports with 5 removable, self powered [...] bwn_pci0: <Broadcom BCM4322 802.11n Dual-Band Wireless> mem 0xd3100000-0xd3103fff at device 0.0 on pci3 [...] bhndb0: <PCI-BHND bridge> on bwn_pci0 [...] bhndb0: Using MSI interrupts on bwn_pci0 [...] bhnd_nvram0: <SPROM/OTP> mem 0xd3101000-0xd3101fff on bhndb0 [...] bhnd0: <BCM4322 SIBA bus> on bhndb0 [...] bhnd_chipc0: <Broadcom ChipCommon I/O Controller, rev 23> mem 0x18000000-0x18000dff,0xffff0000-0xffffffff,0x1c000000-0x1dffffff,0x18000f00-0x18000fff,0x18000e00-0x18000eff irq 0 at core 0 on bhnd0 [...] bhnd_pmu0: <Broadcom ChipCommon PMU, rev 2> on bhnd_chipc0 [...] gpio0: <Broadcom ChipCommon GPIO> mem 0x18000000-0x18000dff on bhnd_chipc0 [...] bhnd_hostb0: <Broadcom PCIe-G1 Host-PCI bridge, rev 11> mem 0x18002000-0x18002dff,0-0x7fffffff,0x18002f00-0x18002fff,0x18002e00-0x18002eff irq 2 at core 2 on bhnd0 [...] bhnd0: <Broadcom Internal Memory, rev 3> mem 0x18006000-0x18006dff,0x1e000000-0x1e01ffff,0x18006f00-0x18006fff,0x18006e00-0x18006eff at core 6 (no driver attached) [...] bhnd0: <Broadcom unknown, rev 0> mem 0x18005000-0x18005dff,0x18005f00-0x18005fff,0x18005e00-0x18005eff irq 5 at core 5 (no driver attached) [...] bwn0: <Broadcom 802.11 MAC/PHY/Radio, rev 16> mem 0x18001000-0x18001dff,0x18001f00-0x18001fff,0x18001e00-0x18001eff irq 1 at core 1 on bhnd0 [...] bwn0: bwn_phy_n_attach: BWN_GPL_PHY not in kernel config; no PHY-N support [...] bwn0: failed [...] device_attach: bwn0 attach returned 6 [...] bhnd0: <Broadcom USB 2.0 Device Controller, rev 5> mem 0x18004000-0x18004dff,0x18004f00-0x18004fff,0x18004e00-0x18004eff irq 4 at core 4 (no driver attached) [...] bwn0: <Broadcom 802.11 MAC/PHY/Radio, rev 16> mem 0x18001000-0x18001dff,0x18001f00-0x18001fff,0x18001e00-0x18001eff irq 1 at core 1 on bhnd0 [...] bwn0: bwn_phy_n_attach: BWN_GPL_PHY not in kernel config; no PHY-N support [...] bwn0: failed [...] device_attach: bwn0 attach returned 6 [...] bwn0: <Broadcom 802.11 MAC/PHY/Radio, rev 16> mem 0x18001000-0x18001dff,0x18001f00-0x18001fff,0x18001e00-0x18001eff irq 1 at core 1 on bhnd0 [...] bwn0: bwn_phy_n_attach: BWN_GPL_PHY not in kernel config; no PHY-N support [...] bwn0: failed [...] device_attach: bwn0 attach returned 6 [...] bwn0: <Broadcom 802.11 MAC/PHY/Radio, rev 16> mem 0x18001000-0x18001dff,0x18001f00-0x18001fff,0x18001e00-0x18001eff irq 1 at core 1 on bhnd0 [...] bwn0: bwn_phy_n_attach: BWN_GPL_PHY not in kernel config; no PHY-N support [...] bwn0: failed [...] device_attach: bwn0 attach returned 6 [...] bwn0: <Broadcom 802.11 MAC/PHY/Radio, rev 16> mem 0x18001000-0x18001dff,0x18001f00-0x18001fff,0x18001e00-0x18001eff irq 1 at core 1 on bhnd0 [...] bwn0: bwn_phy_n_attach: BWN_GPL_PHY not in kernel config; no PHY-N support [...] bwn0: failed [...] device_attach: bwn0 attach returned 6 [...] bwn0: <Broadcom 802.11 MAC/PHY/Radio, rev 16> mem 0x18001000-0x18001dff,0x18001f00-0x18001fff,0x18001e00-0x18001eff irq 1 at core 1 on bhnd0 [...] bwn0: bwn_phy_n_attach: BWN_GPL_PHY not in kernel config; no PHY-N support [...] bwn0: failed [...] device_attach: bwn0 attach returned 6 [...] uhub0: 7 ports with 7 removable, self powered [...] lo0: link state changed to UP [...] ugen2.2: <Apple Inc. BRCM2046 Hub> at usbus2 [...] uhub4 on uhub1 [...] uhub4: <Apple Inc. BRCM2046 Hub, class 9/0, rev 2.00/1.00, addr 2> on usbus2 [...] uhub4: 3 ports with 0 removable, self powered [...] ugen2.3: <Apple Inc. Bluetooth USB Host Controller> at usbus2 [...] ugen1.2: <Apple Inc. Built-in iSight> at usbus1 [...] nfe0: link state changed to DOWN [...] ugen0.2: <Apple Computer, Inc. IR Receiver> at usbus0 [...] ugen0.3: <Apple, Inc. Apple Internal Keyboard / Trackpad> at usbus0 [...] ukbd0 on uhub3 [...] ukbd0: <Apple Internal Keyboard> on usbus0 [...] kbd1 at ukbd0 [...] ubt0 on uhub4 [...] ubt0: <Apple Inc. Bluetooth USB Host Controller, rev 2.00/2.08, addr 3> on usbus2 [...] uhid0 on uhub3 [...] uhid0: <Apple Computer, Inc. IR Receiver, class 0/0, rev 2.00/0.16, addr 2> on usbus0 [...] uhid1 on uhub3 [...] uhid1: <Touchpad> on usbus0 [...] ums0 on uhub3 [...] ums0: <Touchpad> on usbus0 [...] ums0: 3 buttons and [XY] coordinates ID=2 [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] nfe0: link state changed to UP [...] nfe0: link state changed to DOWN [...] nfe0: link state changed to UP [...] ugen0.4: <Wiebetech LLC Wiebetech Mouse Jiggler3> at usbus0 [...] ums1 on uhub3 [...] ums1: <Wiebetech LLC Wiebetech Mouse Jiggler3, class 0/0, rev 1.10/1.00, addr 4> on usbus0 [...] ums1: 3 buttons and [XY] coordinates ID=0