[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE-p1 stable/25.7-n271606-9af17f0102ca SMP amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) N150 (806.40-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xb06e0 Family=0x6 Model=0xbe Stepping=0 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x239ca7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] Structured Extended Features2=0x98c007bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc184410<FSRM,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x1580fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16355155968 (15597 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] WARNING: L3 data cache covers more APIC IDs than a package (7 > 3) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 2 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x75cb7000-0x75cb7017 [...] smbios0: Entry point: v3 (64-bit), Version: 3.6 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x60e7000000-0x60e7ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x60e8110000-0x60e811ffff at device 13.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0x60e8100000-0x60e810ffff at device 20.0 on pci0 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0x81100000-0x81101fff,0x81103000-0x811030ff,0x81102000-0x811027ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igc0: <Intel(R) Ethernet Controller I226-V> mem 0x80e00000-0x80efffff,0x80f00000-0x80f03fff at device 0.0 on pci1 [...] igc0: EEPROM V2.13-0 eTrack 0x80000284 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 4 RX queues 4 TX queues [...] igc0: Using MSI-X interrupts with 5 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igc1: <Intel(R) Ethernet Controller I226-V> mem 0x80b00000-0x80bfffff,0x80c00000-0x80c03fff at device 0.0 on pci2 [...] igc1: EEPROM V2.13-0 eTrack 0x80000284 [...] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] igc1: Using 4 RX queues 4 TX queues [...] igc1: Using MSI-X interrupts with 5 vectors [...] igc1: Ethernet address: ... [...] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igc2: <Intel(R) Ethernet Controller I226-V> mem 0x80800000-0x808fffff,0x80900000-0x80903fff at device 0.0 on pci3 [...] igc2: EEPROM V2.13-0 eTrack 0x80000284 [...] igc2: Using 1024 TX descriptors and 1024 RX descriptors [...] igc2: Using 4 RX queues 4 TX queues [...] igc2: Using MSI-X interrupts with 5 vectors [...] igc2: Ethernet address: ... [...] igc2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib4: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igc3: <Intel(R) Ethernet Controller I226-V> mem 0x80500000-0x805fffff,0x80600000-0x80603fff at device 0.0 on pci4 [...] igc3: EEPROM V2.13-0 eTrack 0x80000284 [...] igc3: Using 1024 TX descriptors and 1024 RX descriptors [...] igc3: Using 4 RX queues 4 TX queues [...] igc3: Using MSI-X interrupts with 5 vectors [...] igc3: Ethernet address: ... [...] igc3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] nvme0: <Generic NVMe Device> mem 0x81000000-0x81003fff at device 0.0 on pci5 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Alder Lake-N HDA Controller> mem 0x60e8120000-0x60e8123fff,0x60e8000000-0x60e80fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] cpufreq0: <CPU frequency control> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] cpufreq1: <CPU frequency control> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] cpufreq2: <CPU frequency control> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] cpufreq3: <CPU frequency control> on cpu3 [...] Timecounter "TSC" frequency 806407298 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] nvme0: Allocated 64MB host memory buffer [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen1.1: <Intel XHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] Trying to mount root from ufs:/dev/ufs/OPNsense_Install [ro,noatime]... [...] uhub0: 3 ports with 3 removable, self powered [...] uhub1: 16 ports with 16 removable, self powered [...] Root mount waiting for: usbus0 usbus1 CAM [...] ugen1.2: <SINO WEALTH Mechanical Keyboard> at usbus1 [...] ukbd0 on uhub1 [...] ukbd0: <SINO WEALTH Mechanical Keyboard, class 0/0, rev 1.10/3.13, addr 1> on usbus1 [...] kbd1 at ukbd0 [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device USB SanDisk 3.2Gen1 (0x0781:0x5591) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device USB SanDisk 3.2Gen1 (0x0781:0x5591) [...] ugen0.2: <USB SanDisk 3.2Gen1> at usbus0 [...] umass0 on uhub0 [...] umass0: <USB SanDisk 3.2Gen1, class 0/0, rev 3.20/1.00, addr 1> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc000 [...] umass0:2:0: Attached to scbus2 [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] nda0 at nvme0 bus 0 scbus1 target 0 lun 1 [...] nda0: <ShiJi 128GB M.2-NVMe W0717A3 AA00000000243> [...] nda0: Serial Number... [...] nda0: nvme version 1.3 [...] nda0: 122104MB (250069680 512 byte sectors) [...] da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] da0: <USB SanDisk 3.2Gen1 1.00> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: 29340MB (60088320 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] Dual Console: Video Primary, Serial Secondary [...] igc0: link state changed to UP [...] igc1: link state changed to UP [...] ichsmb0: <Intel Alder Lake SMBus controller> port 0xefa0-0xefbf mem 0x60e8128000-0x60e81280ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] ums0 on uhub1 [...] ums0: <SINO WEALTH Mechanical Keyboard, class 0/0, rev 1.10/3.13, addr 1> on usbus1 [...] ums0: 5 buttons and [XYZ] coordinates ID=1 [...] igc0: link state changed to DOWN [...] igc1: link state changed to DOWN [...] igc0: link state changed to UP [...] igc1: link state changed to UP [...] lo0: link state changed to UP [...] [37] pflog0: permanently promiscuous mode enabled [...] [37] igc0: link state changed to DOWN [...] [37] igc1: link state changed to DOWN [...] [40] igc0: link state changed to UP [...] [41] igc1: link state changed to UP [...] [127] ZFS filesystem version: 5 [...] [127] ZFS storage pool version: features support (5000) [...] [365] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] [365] Waiting (max 60 seconds) for system process `syncer' to stop... [...] [366] Syncing disks, vnodes remaining... 0 0 0 0 0 0 done [...] [371] All buffers synced. [...] [372] Uptime: 6m12s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE-p1 stable/25.7-n271606-9af17f0102ca SMP amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] [1] VT(efifb): resolution 800x600 [...] [1] CPU: Intel(R) N150 (806.40-MHz K8-class CPU) [...] [1] Origin="GenuineIntel" Id=0xb06e0 Family=0x6 Model=0xbe Stepping=0 [...] [1] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] [1] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] [1] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] [1] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] [1] Structured Extended Features=0x239ca7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] [1] Structured Extended Features2=0x98c007bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,RDPID,MOVDIRI,MOVDIR64B> [...] [1] Structured Extended Features3=0xfc184410<FSRM,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] [1] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] [1] IA32_ARCH_CAPS=0x1580fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> [...] [1] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] [1] TSC: P-state invariant, performance statistics [...] [1] real memory = 17179869184 (16384 MB) [...] [1] avail memory = 16348737536 (15591 MB) [...] [1] Event timer "LAPIC" quality 600 [...] [1] ACPI APIC Table: <ALASKA A M I > [...] [1] WARNING: L3 data cache covers more APIC IDs than a package (7 > 3) [...] [1] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] [1] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] [1] random: registering fast source Intel Secure Key RNG [...] [1] random: fast provider: "Intel Secure Key RNG" [...] [1] random: unblocking device. [...] [1] ioapic0 <Version 2.0> irqs 0-119 [...] [1] Launching APs: 3 1 2 [...] [1] random: entropy device external interface [...] [1] wlan: mac acl policy registered [...] [1] kbd0 at kbdmux0 [...] [1] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] [1] efirtc0: <EFI Realtime Clock> [...] [1] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] smbios0: <System Management BIOS> at iomem 0x75cb7000-0x75cb7017 [...] [1] smbios0: Entry point: v3 (64-bit), Version: 3.6 [...] [1] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] [1] acpi0: <ALASKA A M I > [...] [1] acpi0: Power Button (fixed) [...] [1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] [1] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] [1] Event timer "HPET" frequency 19200000 Hz quality 550 [...] [1] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] [1] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] [1] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] [1] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] [1] atrtc1: <AT realtime clock> on acpi0 [...] [1] atrtc1: Warning: Couldn't map I/O. [...] [1] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] [1] Event timer "RTC" frequency 32768 Hz quality 0 [...] [1] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] [1] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] [1] Event timer "i8254" frequency 1193182 Hz quality 100 [...] [1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] [1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] [1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] [1] pci0: <ACPI PCI bus> on pcib0 [...] [1] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x60e7000000-0x60e7ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] [1] vgapci0: Boot video device [...] [1] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x60e8110000-0x60e811ffff at device 13.0 on pci0 [...] [1] xhci0: 32 bytes context size, 64-bit DMA [...] [1] usbus0 on xhci0 [...] [1] usbus0: 5.0Gbps Super Speed USB v3.0 [...] [1] xhci1: <XHCI (generic) USB 3.0 controller> mem 0x60e8100000-0x60e810ffff at device 20.0 on pci0 [...] [1] xhci1: 32 bytes context size, 64-bit DMA [...] [1] usbus1 on xhci1 [...] [1] usbus1: 5.0Gbps Super Speed USB v3.0 [...] [1] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] [1] pci0: <simple comms> at device 22.0 (no driver attached) [...] [1] ahci0: <AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0x81100000-0x81101fff,0x81103000-0x811030ff,0x81102000-0x811027ff at device 23.0 on pci0 [...] [1] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] [1] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] [1] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] [1] pci1: <ACPI PCI bus> on pcib1 [...] [1] igc0: <Intel(R) Ethernet Controller I226-V> mem 0x80e00000-0x80efffff,0x80f00000-0x80f03fff at device 0.0 on pci1 [...] [1] igc0: EEPROM V2.13-0 eTrack 0x80000284 [...] [1] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc0: Using 4 RX queues 4 TX queues [...] [1] igc0: Using MSI-X interrupts with 5 vectors [...] [1] igc0: Ethernet address: ... [...] [1] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0 [...] [1] pci2: <ACPI PCI bus> on pcib2 [...] [1] igc1: <Intel(R) Ethernet Controller I226-V> mem 0x80b00000-0x80bfffff,0x80c00000-0x80c03fff at device 0.0 on pci2 [...] [1] igc1: EEPROM V2.13-0 eTrack 0x80000284 [...] [1] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc1: Using 4 RX queues 4 TX queues [...] [1] igc1: Using MSI-X interrupts with 5 vectors [...] [1] igc1: Ethernet address: ... [...] [1] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] [1] pci3: <ACPI PCI bus> on pcib3 [...] [1] igc2: <Intel(R) Ethernet Controller I226-V> mem 0x80800000-0x808fffff,0x80900000-0x80903fff at device 0.0 on pci3 [...] [1] igc2: EEPROM V2.13-0 eTrack 0x80000284 [...] [1] igc2: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc2: Using 4 RX queues 4 TX queues [...] [1] igc2: Using MSI-X interrupts with 5 vectors [...] [1] igc2: Ethernet address: ... [...] [1] igc2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib4: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] [1] pci4: <ACPI PCI bus> on pcib4 [...] [1] igc3: <Intel(R) Ethernet Controller I226-V> mem 0x80500000-0x805fffff,0x80600000-0x80603fff at device 0.0 on pci4 [...] [1] igc3: EEPROM V2.13-0 eTrack 0x80000284 [...] [1] igc3: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc3: Using 4 RX queues 4 TX queues [...] [1] igc3: Using MSI-X interrupts with 5 vectors [...] [1] igc3: Ethernet address: ... [...] [1] igc3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib5: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] [1] pci5: <ACPI PCI bus> on pcib5 [...] [1] nvme0: <Generic NVMe Device> mem 0x81000000-0x81003fff at device 0.0 on pci5 [...] [1] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] [1] isa0: <ISA bus> on isab0 [...] [1] hdac0: <Intel Alder Lake-N HDA Controller> mem 0x60e8120000-0x60e8123fff,0x60e8000000-0x60e80fffff at device 31.3 on pci0 [...] [1] pci0: <serial bus> at device 31.5 (no driver attached) [...] [1] acpi_button0: <Sleep Button> on acpi0 [...] [1] cpu0: <ACPI CPU> on acpi0 [...] [1] acpi_button1: <Power Button> on acpi0 [...] [1] acpi_tz0: <Thermal Zone> on acpi0 [...] [1] ns8250: UART FCR is broken [...] [1] ns8250: UART FCR is broken [...] [1] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] [1] ns8250: UART FCR is broken [...] [1] uart0: console (115200,n,8,1) [...] [1] ns8250: UART FCR is broken [...] [1] ns8250: UART FCR is broken [...] [1] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] [1] acpi_syscontainer0: <System Container> on acpi0 [...] [1] acpi_syscontainer1: <System Container> on acpi0 [...] [1] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] [1] atrtc0: Warning: Couldn't map I/O. [...] [1] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] atrtc0: Can't map interrupt. [...] [1] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] [1] cpufreq0: <CPU frequency control> on cpu0 [...] [1] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] [1] cpufreq1: <CPU frequency control> on cpu1 [...] [1] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] [1] cpufreq2: <CPU frequency control> on cpu2 [...] [1] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] [1] cpufreq3: <CPU frequency control> on cpu3 [...] [1] Timecounter "TSC" frequency 806407343 Hz quality 1000 [...] [1] Timecounters tick every 1.000 msec [...] [1] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] [1] ugen1.1: <Intel XHCI root HUB> at usbus1 [...] [1] uhub0 on usbus0 [...] [1] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] [1] uhub1 on usbus1 [...] [1] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] [2] ZFS filesystem version: 5 [...] [2] ZFS storage pool version: features support (5000) [...] [2] nvme0: Allocated 64MB host memory buffer [...] [2] nda0 at nvme0 bus 0 scbus1 target 0 lun 1 [...] nda0: <ShiJi 128GB M.2-NVMe W0717A3 AA00000000243> [...] nda0: Serial Number... [...] [2] nda0: nvme version 1.3 [...] nda0: 122104MB (250069680 512 byte sectors) [...] [2] Trying to mount root from zfs:zroot/ROOT/default []... [...] [2] uhub0: 3 ports with 3 removable, self powered [...] [3] uhub1: 16 ports with 16 removable, self powered [...] [3] Root mount waiting for: usbus1 [...] [3] ugen1.2: <SINO WEALTH Mechanical Keyboard> at usbus1 [...] [3] ukbd0 on uhub1 [...] [3] ukbd0: <SINO WEALTH Mechanical Keyboard, class 0/0, rev 1.10/3.13, addr 1> on usbus1 [...] [3] kbd1 at ukbd0 [...] [3] Dual Console: Video Primary, Serial Secondary [...] [4] pid 31 (zpool) is attempting to use unsafe AIO requests - not logging anymore [...] [6] igc0: link state changed to UP [...] [6] igc1: link state changed to UP [...] [7] ichsmb0: <Intel Alder Lake SMBus controller> port 0xefa0-0xefbf mem 0x60e8128000-0x60e81280ff at device 31.4 on pci0 [...] [7] smbus0: <System Management Bus> on ichsmb0 [...] [8] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] [8] acpi_wmi0: cannot find EC device [...] [8] acpi_wmi0: Embedded MOF found [...] [8] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] [8] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] [8] acpi_wmi1: cannot find EC device [...] [8] acpi_wmi1: Embedded MOF found [...] [8] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] [8] ums0 on uhub1 [...] [8] ums0: <SINO WEALTH Mechanical Keyboard, class 0/0, rev 1.10/3.13, addr 1> on usbus1 [...] [8] ums0: 5 buttons and [XYZ] coordinates ID=1 [...] [10] lo0: link state changed to UP [...] [11] pflog0: permanently promiscuous mode enabled [...] [11] igc0: link state changed to DOWN [...] [11] igc1: link state changed to DOWN [...] [14] igc0: link state changed to UP [...] [15] igc1: link state changed to UP [...] [831] ugen1.2: <SINO WEALTH Mechanical Keyboard> at usbus1 (disconnected) [...] [831] ukbd0: at uhub1, port 3, addr 1 (disconnected) [...] [831] ukbd0: detached [...] [831] ums0: at uhub1, port 3, addr 1 (disconnected) [...] [831] ums0: detached [...] [2191] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] [2191] Waiting (max 60 seconds) for system process `syncer' to stop... [...] [2192] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] [2196] All buffers synced. [...] [2196] Uptime: 36m36s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE-p2 stable/25.7-n271676-ab2281de1853 SMP amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] [1] VT(vga): resolution 640x480 [...] [1] CPU: Intel(R) N150 (806.40-MHz K8-class CPU) [...] [1] Origin="GenuineIntel" Id=0xb06e0 Family=0x6 Model=0xbe Stepping=0 [...] [1] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] [1] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] [1] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] [1] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] [1] Structured Extended Features=0x239ca7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] [1] Structured Extended Features2=0x98c007bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,RDPID,MOVDIRI,MOVDIR64B> [...] [1] Structured Extended Features3=0xfc184410<FSRM,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] [1] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] [1] IA32_ARCH_CAPS=0x1580fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> [...] [1] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] [1] TSC: P-state invariant, performance statistics [...] [1] real memory = 17179869184 (16384 MB) [...] [1] avail memory = 16348712960 (15591 MB) [...] [1] Event timer "LAPIC" quality 600 [...] [1] ACPI APIC Table: <ALASKA A M I > [...] [1] WARNING: L3 data cache covers more APIC IDs than a package (7 > 3) [...] [1] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] [1] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] [1] random: registering fast source Intel Secure Key RNG [...] [1] random: fast provider: "Intel Secure Key RNG" [...] [1] random: unblocking device. [...] [1] ioapic0 <Version 2.0> irqs 0-119 [...] [1] Launching APs: 2 1 3 [...] [1] random: entropy device external interface [...] [1] wlan: mac acl policy registered [...] [1] kbd0 at kbdmux0 [...] [1] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] [1] efirtc0: <EFI Realtime Clock> [...] [1] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] smbios0: <System Management BIOS> at iomem 0x75cb7000-0x75cb7017 [...] [1] smbios0: Entry point: v3 (64-bit), Version: 3.6 [...] [1] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] [1] acpi0: <ALASKA A M I > [...] [1] acpi0: Power Button (fixed) [...] [1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] [1] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] [1] Event timer "HPET" frequency 19200000 Hz quality 550 [...] [1] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] [1] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] [1] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] [1] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] [1] atrtc1: <AT realtime clock> on acpi0 [...] [1] atrtc1: Warning: Couldn't map I/O. [...] [1] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] [1] Event timer "RTC" frequency 32768 Hz quality 0 [...] [1] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] [1] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] [1] Event timer "i8254" frequency 1193182 Hz quality 100 [...] [1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] [1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] [1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] [1] pci0: <ACPI PCI bus> on pcib0 [...] [1] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x60e7000000-0x60e7ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] [1] vgapci0: Boot video device [...] [1] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x60e8110000-0x60e811ffff at device 13.0 on pci0 [...] [1] xhci0: 32 bytes context size, 64-bit DMA [...] [1] usbus0 on xhci0 [...] [1] usbus0: 5.0Gbps Super Speed USB v3.0 [...] [1] xhci1: <XHCI (generic) USB 3.0 controller> mem 0x60e8100000-0x60e810ffff at device 20.0 on pci0 [...] [1] xhci1: 32 bytes context size, 64-bit DMA [...] [1] usbus1 on xhci1 [...] [1] usbus1: 5.0Gbps Super Speed USB v3.0 [...] [1] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] [1] pci0: <simple comms> at device 22.0 (no driver attached) [...] [1] ahci0: <AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0x81100000-0x81101fff,0x81103000-0x811030ff,0x81102000-0x811027ff at device 23.0 on pci0 [...] [1] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] [1] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] [1] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] [1] pci1: <ACPI PCI bus> on pcib1 [...] [1] igc0: <Intel(R) Ethernet Controller I226-V> mem 0x80e00000-0x80efffff,0x80f00000-0x80f03fff at device 0.0 on pci1 [...] [1] igc0: EEPROM V2.13-0 eTrack 0x80000284 [...] [1] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc0: Using 4 RX queues 4 TX queues [...] [1] igc0: Using MSI-X interrupts with 5 vectors [...] [1] igc0: Ethernet address: ... [...] [1] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0 [...] [1] pci2: <ACPI PCI bus> on pcib2 [...] [1] igc1: <Intel(R) Ethernet Controller I226-V> mem 0x80b00000-0x80bfffff,0x80c00000-0x80c03fff at device 0.0 on pci2 [...] [1] igc1: EEPROM V2.13-0 eTrack 0x80000284 [...] [1] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc1: Using 4 RX queues 4 TX queues [...] [1] igc1: Using MSI-X interrupts with 5 vectors [...] [1] igc1: Ethernet address: ... [...] [1] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] [1] pci3: <ACPI PCI bus> on pcib3 [...] [1] igc2: <Intel(R) Ethernet Controller I226-V> mem 0x80800000-0x808fffff,0x80900000-0x80903fff at device 0.0 on pci3 [...] [1] igc2: EEPROM V2.13-0 eTrack 0x80000284 [...] [1] igc2: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc2: Using 4 RX queues 4 TX queues [...] [1] igc2: Using MSI-X interrupts with 5 vectors [...] [1] igc2: Ethernet address: ... [...] [1] igc2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib4: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] [1] pci4: <ACPI PCI bus> on pcib4 [...] [1] igc3: <Intel(R) Ethernet Controller I226-V> mem 0x80500000-0x805fffff,0x80600000-0x80603fff at device 0.0 on pci4 [...] [1] igc3: EEPROM V2.13-0 eTrack 0x80000284 [...] [1] igc3: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc3: Using 4 RX queues 4 TX queues [...] [1] igc3: Using MSI-X interrupts with 5 vectors [...] [1] igc3: Ethernet address: ... [...] [1] igc3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib5: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] [1] pci5: <ACPI PCI bus> on pcib5 [...] [1] nvme0: <Generic NVMe Device> mem 0x81000000-0x81003fff at device 0.0 on pci5 [...] [1] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] [1] isa0: <ISA bus> on isab0 [...] [1] hdac0: <Intel Alder Lake-N HDA Controller> mem 0x60e8120000-0x60e8123fff,0x60e8000000-0x60e80fffff at device 31.3 on pci0 [...] [1] pci0: <serial bus> at device 31.5 (no driver attached) [...] [1] acpi_button0: <Sleep Button> on acpi0 [...] [1] cpu0: <ACPI CPU> on acpi0 [...] [1] acpi_button1: <Power Button> on acpi0 [...] [1] acpi_tz0: <Thermal Zone> on acpi0 [...] [1] ns8250: UART FCR is broken [...] [1] ns8250: UART FCR is broken [...] [1] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] [1] ns8250: UART FCR is broken [...] [1] uart0: console (115200,n,8,1) [...] [1] ns8250: UART FCR is broken [...] [1] ns8250: UART FCR is broken [...] [1] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] [1] acpi_syscontainer0: <System Container> on acpi0 [...] [1] acpi_syscontainer1: <System Container> on acpi0 [...] [1] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] [1] atrtc0: Warning: Couldn't map I/O. [...] [1] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] atrtc0: Can't map interrupt. [...] [1] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] [1] cpufreq0: <CPU frequency control> on cpu0 [...] [1] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] [1] cpufreq1: <CPU frequency control> on cpu1 [...] [1] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] [1] cpufreq2: <CPU frequency control> on cpu2 [...] [1] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] [1] cpufreq3: <CPU frequency control> on cpu3 [...] [1] Timecounter "TSC" frequency 806409180 Hz quality 1000 [...] [1] Timecounters tick every 1.000 msec [...] [1] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] [1] ugen1.1: <Intel XHCI root HUB> at usbus1 [...] [1] uhub0 on usbus0 [...] [1] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] [2] ZFS filesystem version: 5 [...] [2] ZFS storage pool version: features support (5000) [...] [2] uhub1 on usbus1 [...] [2] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] [2] nvme0: Allocated 64MB host memory buffer [...] [2] nda0 at nvme0 bus 0 scbus1 target 0 lun 1 [...] nda0: <ShiJi 128GB M.2-NVMe W0717A3 AA00000000243> [...] nda0: Serial Number... [...] [2] nda0: nvme version 1.3 [...] nda0: 122104MB (250069680 512 byte sectors) [...] [2] Trying to mount root from zfs:zroot/ROOT/default []... [...] [2] uhub0: 3 ports with 3 removable, self powered [...] [3] uhub1: 16 ports with 16 removable, self powered [...] [3] pid 31 (zpool) is attempting to use unsafe AIO requests - not logging anymore