[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE stable/25.1-n269614-36155813721 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(vga): resolution 640x480 [...] CPU microcode: updated from 0x1d to 0x24000026 [...] CPU: Intel(R) Celeron(R) N5105 @ 2.00GHz (1996.80-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906c0 Family=0x6 Model=0x9c Stepping=0 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2394a2c3<FSGSBASE,TSCADJ,FDPEXC,SMEP,ERMS,NFPUSG,PQE,RDSEED,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] Structured Extended Features2=0x18400124<UMIP,WAITPKG,GFNI,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x14020c6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3822055424 (3644 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 2 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x74c7b000-0x74c7b01e [...] smbios0: Version: 3.3, BCD Revision: 3.3 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x6000000000-0x6000ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x6001100000-0x600110ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0x80100000-0x80101fff,0x80103000-0x801030ff,0x80102000-0x801027ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] sdhci_pci0: <Generic SD HCI> mem 0x6001127000-0x6001127fff at device 26.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] nvme0: <Generic NVMe Device> mem 0x80000000-0x80003fff at device 0.0 on pci3 [...] pcib4: <ACPI PCI-PCI bridge> at device 28.5 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igc0: <Intel(R) Ethernet Controller I226-V> mem 0x7fe00000-0x7fefffff,0x7ff00000-0x7ff03fff at device 0.0 on pci4 [...] igc0: EEPROM V2.13-0 eTrack 0x80000286 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 4 RX queues 4 TX queues [...] igc0: Using MSI-X interrupts with 5 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igc1: <Intel(R) Ethernet Controller I226-V> mem 0x7fc00000-0x7fcfffff,0x7fd00000-0x7fd03fff at device 0.0 on pci5 [...] igc1: EEPROM V2.13-0 eTrack 0x80000286 [...] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] igc1: Using 4 RX queues 4 TX queues [...] igc1: Using MSI-X interrupts with 5 vectors [...] igc1: Ethernet address: ... [...] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Jasper Lake HDA Controller> mem 0x6001120000-0x6001123fff,0x6001000000-0x60010fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC" frequency 1996803488 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] mmcsd0: 31GB <MMCHC BJTD4R 0.3 SN ... MFG 08/2023 by 21 0x0000> at mmc0 200.0MHz/8bit/8192-block [...] mmcsd0boot0: 4MB partition 1 at mmcsd0 [...] mmcsd0boot1: 4MB partition 2 at mmcsd0 [...] mmcsd0rpmb: 4MB partition 3 at mmcsd0 [...] hdacc0: <Intel Jasper Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa0: <Intel Jasper Lake Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Jasper Lake (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] nda0 at nvme0 bus 0 scbus1 target 0 lun 1 [...] nda0: <Micron 2200S NVMe 256GB 22001070 20142792B090> [...] nda0: Serial Number... [...] nda0: nvme version 1.2 [...] nda0: 244198MB (500118192 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 14 ports with 14 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <VIA Labs, Inc. USB2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/7.00, addr 1> on usbus0 [...] uhub1: MTT enabled [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] uhub1: 5 ports with 4 removable, self powered [...] ugen0.3: <VIA Labs, Inc. USB Billboard Device> at usbus0 [...] ugen0.4: <VIA Labs, Inc. USB3.0 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <VIA Labs, Inc. USB3.0 Hub, class 9/0, rev 3.20/7.00, addr 3> on usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] uhub2: 4 ports with 4 removable, self powered [...] pid 34 (zpool) is attempting to use unsafe AIO requests - not logging anymore [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] igc1: link state changed to UP [...] igc1: link state changed to DOWN [...] igc1: link state changed to UP [...] igc1: link state changed to DOWN [...] igc1: link state changed to UP [...] igc0: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] All buffers synced. [...] Uptime: 9h21m35s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE stable/25.1-n269614-36155813721 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(vga): resolution 640x480 [...] CPU microcode: updated from 0x1d to 0x24000026 [...] CPU: Intel(R) Celeron(R) N5105 @ 2.00GHz (1996.80-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906c0 Family=0x6 Model=0x9c Stepping=0 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2394a2c3<FSGSBASE,TSCADJ,FDPEXC,SMEP,ERMS,NFPUSG,PQE,RDSEED,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] Structured Extended Features2=0x18400124<UMIP,WAITPKG,GFNI,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x14020c6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3822055424 (3644 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 3 2 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x74c7b000-0x74c7b01e [...] smbios0: Version: 3.3, BCD Revision: 3.3 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x6000000000-0x6000ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x6001100000-0x600110ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0x80100000-0x80101fff,0x80103000-0x801030ff,0x80102000-0x801027ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] sdhci_pci0: <Generic SD HCI> mem 0x6001127000-0x6001127fff at device 26.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] nvme0: <Generic NVMe Device> mem 0x80000000-0x80003fff at device 0.0 on pci3 [...] pcib4: <ACPI PCI-PCI bridge> at device 28.5 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igc0: <Intel(R) Ethernet Controller I226-V> mem 0x7fe00000-0x7fefffff,0x7ff00000-0x7ff03fff at device 0.0 on pci4 [...] igc0: EEPROM V2.13-0 eTrack 0x80000286 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 4 RX queues 4 TX queues [...] igc0: Using MSI-X interrupts with 5 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igc1: <Intel(R) Ethernet Controller I226-V> mem 0x7fc00000-0x7fcfffff,0x7fd00000-0x7fd03fff at device 0.0 on pci5 [...] igc1: EEPROM V2.13-0 eTrack 0x80000286 [...] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] igc1: Using 4 RX queues 4 TX queues [...] igc1: Using MSI-X interrupts with 5 vectors [...] igc1: Ethernet address: ... [...] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Jasper Lake HDA Controller> mem 0x6001120000-0x6001123fff,0x6001000000-0x60010fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC" frequency 1996803206 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] mmcsd0: 31GB <MMCHC BJTD4R 0.3 SN ... MFG 08/2023 by 21 0x0000> at mmc0 200.0MHz/8bit/8192-block [...] mmcsd0boot0: 4MB partition 1 at mmcsd0 [...] mmcsd0boot1: 4MB partition 2 at mmcsd0 [...] mmcsd0rpmb: 4MB partition 3 at mmcsd0 [...] hdacc0: <Intel Jasper Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa0: <Intel Jasper Lake Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Jasper Lake (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] nda0 at nvme0 bus 0 scbus1 target 0 lun 1 [...] nda0: <Micron 2200S NVMe 256GB 22001070 20142792B090> [...] nda0: Serial Number... [...] nda0: nvme version 1.2 [...] nda0: 244198MB (500118192 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 14 ports with 14 removable, self powered [...] ugen0.2: <VIA Labs, Inc. USB2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/7.00, addr 1> on usbus0 [...] uhub1: MTT enabled [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] uhub1: 5 ports with 4 removable, self powered [...] ugen0.3: <VIA Labs, Inc. USB Billboard Device> at usbus0 [...] ugen0.4: <VIA Labs, Inc. USB3.0 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <VIA Labs, Inc. USB3.0 Hub, class 9/0, rev 3.20/7.00, addr 3> on usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] uhub2: 4 ports with 4 removable, self powered [...] pid 34 (zpool) is attempting to use unsafe AIO requests - not logging anymore [...] igc0: link state changed to UP [...] igc1: link state changed to UP [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] igc0: link state changed to DOWN [...] igc1: link state changed to DOWN [...] igc0: link state changed to UP [...] igc1: link state changed to UP [...] 109.169268 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 109.264922 [1469] netmap_finalize_obj_allocator Unable to create cluster at 177766 for 'netmap_buf' allocator [...] 109.340960 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igc0: link state changed to DOWN [...] igc0: link state changed to UP [...] igc0: link state changed to DOWN [...] igc0: link state changed to UP [...] 612.145696 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 612.154031 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igc0: link state changed to DOWN [...] igc0: link state changed to UP [...] pf: loose state match: TCP out wire: XXX.XXX.XXX.XXX:XXX XXX.XXX.XXX.XXX:XXX stack: XXX.XXX.XXX.XXX:XXX XXX.XXX.XXX.XXX:XXX [lo=3691126890 high=3691237314 win=2058 modulator=0 wscale=6] [lo=1809569936 high=1809700935 win=216 modulator=0 wscale=9] 4:9 RA seq=1809569936 (1809569863) ack=3691126890 len=0 ackskew=0 pkts=97:74 dir=in,rev [...] pf: loose state match: TCP in wire: XXX.XXX.XXX.XXX:XXX XXX.XXX.XXX.XXX:XXX stack: - [lo=3691126890 high=3691237314 win=2058 modulator=0 wscale=6] [lo=1809569936 high=1809700935 win=216 modulator=0 wscale=9] 4:9 RA seq=1809569936 (1809569863) ack=3691126890 len=0 ackskew=0 pkts=97:74 dir=out,rev [...] pf: loose state match: TCP out wire: XXX.XXX.XXX.XXX:XXX XXX.XXX.XXX.XXX:XXX stack: XXX.XXX.XXX.XXX:XXX XXX.XXX.XXX.XXX:XXX [lo=3691127128 high=3692175466 win=2058 modulator=0 wscale=6] [lo=1809569936 high=1809700935 win=2048 modulator=0 wscale=9] 10:10 RA seq=1809569936 (1809569863) ack=3691127128 len=0 ackskew=0 pkts=98:75 dir=in,rev [...] pf: loose state match: TCP in wire: XXX.XXX.XXX.XXX:XXX XXX.XXX.XXX.XXX:XXX stack: - [lo=3691127128 high=3692175466 win=2058 modulator=0 wscale=6] [lo=1809569936 high=1809700935 win=2048 modulator=0 wscale=9] 10:10 RA seq=1809569936 (1809569863) ack=3691127128 len=0 ackskew=0 pkts=98:75 dir=out,rev [...] pf: loose state match: TCP out wire: XXX.XXX.XXX.XXX:XXX XXX.XXX.XXX.XXX:XXX stack: - [lo=4062886826 high=4063155601 win=519 modulator=0 wscale=7] [lo=838519533 high=838585473 win=1050 modulator=0 wscale=8] 9:4 R seq=4062886826 (4062886801) ack=838519533 len=0 ackskew=0 pkts=81:70 dir=out,fwd [...] 630.467811 [1188] netmap_extra_free breaking with head -1 [...] igc0: link state changed to DOWN [...] pf: OK ICMP 3:1 XXX.XXX.XXX.XXX -> XXX.XXX.XXX.XXX state: TCP out wire: XXX.XXX.XXX.XXX:XXX XXX.XXX.XXX.XXX:XXX stack: XXX.XXX.XXX.XXX:XXX XXX.XXX.XXX.XXX:XXX [lo=3354781181 high=3354939389 win=2058 modulator=0 wscale=6] [lo=1837918293 high=1838049080 win=309 modulator=0 wscale=9] 4:4 seq=1837918269 [...] pf: OK ICMP 3:1 XXX.XXX.XXX.XXX -> XXX.XXX.XXX.XXX state: TCP out wire: XXX.XXX.XXX.XXX:XXX XXX.XXX.XXX.XXX:XXX stack: XXX.XXX.XXX.XXX:XXX XXX.XXX.XXX.XXX:XXX [lo=3354781181 high=3354939389 win=2058 modulator=0 wscale=6] [lo=1837918293 high=1838049080 win=309 modulator=0 wscale=9] 4:4 seq=1837918269 [...] pf: OK ICMP 3:1 XXX.XXX.XXX.XXX -> XXX.XXX.XXX.XXX state: TCP out wire: XXX.XXX.XXX.XXX:XXX XXX.XXX.XXX.XXX:XXX stack: XXX.XXX.XXX.XXX:XXX XXX.XXX.XXX.XXX:XXX [lo=3354781181 high=3354939389 win=2058 modulator=0 wscale=6] [lo=1837918293 high=1838049080 win=309 modulator=0 wscale=9] 4:4 seq=1837918269 [...] igc0: link state changed to UP [...] pf: OK ICMP 3:1 XXX.XXX.XXX.XXX -> XXX.XXX.XXX.XXX state: TCP out wire: XXX.XXX.XXX.XXX:XXX XXX.XXX.XXX.XXX:XXX stack: XXX.XXX.XXX.XXX:XXX XXX.XXX.XXX.XXX:XXX [lo=3354781420 high=3354941164 win=2058 modulator=0 wscale=6] [lo=1837918293 high=1838049341 win=312 modulator=0 wscale=9] 4:4 seq=1837918293 [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 1 1 1 1 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 12h43m3s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE stable/25.1-n269614-36155813721 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(vga): resolution 640x480 [...] CPU microcode: updated from 0x1d to 0x24000026 [...] CPU: Intel(R) Celeron(R) N5105 @ 2.00GHz (1996.80-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906c0 Family=0x6 Model=0x9c Stepping=0 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2394a2c3<FSGSBASE,TSCADJ,FDPEXC,SMEP,ERMS,NFPUSG,PQE,RDSEED,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] Structured Extended Features2=0x18400124<UMIP,WAITPKG,GFNI,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x14020c6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3822051328 (3644 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 3 2 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x74c7b000-0x74c7b01e [...] smbios0: Version: 3.3, BCD Revision: 3.3 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x6000000000-0x6000ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x6001100000-0x600110ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0x80100000-0x80101fff,0x80103000-0x801030ff,0x80102000-0x801027ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] sdhci_pci0: <Generic SD HCI> mem 0x6001127000-0x6001127fff at device 26.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] nvme0: <Generic NVMe Device> mem 0x80000000-0x80003fff at device 0.0 on pci3 [...] pcib4: <ACPI PCI-PCI bridge> at device 28.5 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igc0: <Intel(R) Ethernet Controller I226-V> mem 0x7fe00000-0x7fefffff,0x7ff00000-0x7ff03fff at device 0.0 on pci4 [...] igc0: EEPROM V2.13-0 eTrack 0x80000286 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 4 RX queues 4 TX queues [...] igc0: Using MSI-X interrupts with 5 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igc1: <Intel(R) Ethernet Controller I226-V> mem 0x7fc00000-0x7fcfffff,0x7fd00000-0x7fd03fff at device 0.0 on pci5 [...] igc1: EEPROM V2.13-0 eTrack 0x80000286 [...] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] igc1: Using 4 RX queues 4 TX queues [...] igc1: Using MSI-X interrupts with 5 vectors [...] igc1: Ethernet address: ... [...] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Jasper Lake HDA Controller> mem 0x6001120000-0x6001123fff,0x6001000000-0x60010fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC" frequency 1996803049 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] mmcsd0: 31GB <MMCHC BJTD4R 0.3 SN ... MFG 08/2023 by 21 0x0000> at mmc0 200.0MHz/8bit/8192-block [...] mmcsd0boot0: 4MB partition 1 at mmcsd0 [...] mmcsd0boot1: 4MB partition 2 at mmcsd0 [...] mmcsd0rpmb: 4MB partition 3 at mmcsd0 [...] hdacc0: <Intel Jasper Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa0: <Intel Jasper Lake Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Jasper Lake (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] nda0 at nvme0 bus 0 scbus1 target 0 lun 1 [...] nda0: <Micron 2200S NVMe 256GB 22001070 20142792B090> [...] nda0: Serial Number... [...] nda0: nvme version 1.2 [...] nda0: 244198MB (500118192 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 14 ports with 14 removable, self powered [...] ugen0.2: <VIA Labs, Inc. USB2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/7.00, addr 1> on usbus0 [...] uhub1: MTT enabled [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] uhub1: 5 ports with 4 removable, self powered [...] ugen0.3: <VIA Labs, Inc. USB Billboard Device> at usbus0 [...] ugen0.4: <VIA Labs, Inc. USB3.0 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <VIA Labs, Inc. USB3.0 Hub, class 9/0, rev 3.20/7.00, addr 3> on usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] uhub2: 4 ports with 4 removable, self powered [...] pid 34 (zpool) is attempting to use unsafe AIO requests - not logging anymore