[...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p16-HBSD #0 36f2183a3f4(stable/21.1)-dirty: Tue May 25 10:43:32 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 800x600 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: AMD A4-6300B APU with Radeon(tm) HD Graphics (3693.17-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x610f31 Family=0x15 Model=0x13 Stepping=1 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC> [...] Structured Extended Features=0x8<BMI1> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 [...] TSC: P-state invariant, performance statistics [...] real memory = 2147483648 (2048 MB) [...] avail memory = 1462542336 (1394 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <LENOVO TC-FN > [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20181213/tbfadt-796) [...] ioapic0 <Version 2.1> irqs 0-23 on motherboard [...] Launching APs: 1 [...] Timecounter "TSC-low" frequency 1846584458 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7c0, 0) error 19 [...] 000.000052 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <LENOVO TC-FN> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 450 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xc0000000-0xcfffffff,0xfeb00000-0xfeb3ffff irq 17 at device 1.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <ATI (0x9902) HDA Controller> mem 0xfeb44000-0xfeb47fff irq 18 at device 1.1 on pci0 [...] hdac0: hdac_get_capabilities: Invalid corb size (0) [...] device_attach: hdac0 attach returned 6 [...] pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xe020-0xe03f mem 0xfeaa0000-0xfeabffff,0xfea80000-0xfea9ffff irq 18 at device 0.0 on pci1 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] em1: <Intel(R) PRO/1000 Network Connection> port 0xe000-0xe01f mem 0xfea40000-0xfea5ffff,0xfea20000-0xfea3ffff irq 19 at device 0.1 on pci1 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] xhci0: <AMD FCH USB 3.0 controller> mem 0xfeb4a000-0xfeb4bfff irq 18 at device 16.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Unable to map MSI-X table [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] xhci1: <AMD FCH USB 3.0 controller> mem 0xfeb48000-0xfeb49fff irq 17 at device 16.1 on pci0 [...] xhci1: 32 bytes context size, 64-bit DMA [...] xhci1: Unable to map MSI-X table [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AMD Hudson-2 AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xfeb51000-0xfeb517ff irq 19 at device 17.0 on pci0 [...] ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ohci0: <AMD FCH USB Controller> mem 0xfeb50000-0xfeb50fff irq 18 at device 18.0 on pci0 [...] usbus2 on ohci0 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD FCH USB 2.0 controller> mem 0xfeb4f000-0xfeb4f0ff irq 17 at device 18.2 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] ohci1: <AMD FCH USB Controller> mem 0xfeb4e000-0xfeb4efff irq 18 at device 19.0 on pci0 [...] usbus4 on ohci1 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD FCH USB 2.0 controller> mem 0xfeb4d000-0xfeb4d0ff irq 17 at device 19.2 on pci0 [...] usbus5: EHCI version 1.0 [...] usbus5 on ehci1 [...] usbus5: 480Mbps High Speed USB v2.0 [...] hdac0: <AMD Hudson-2 HDA Controller> mem 0xfeb40000-0xfeb43fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] ohci2: <OHCI (generic) USB controller> mem 0xfeb4c000-0xfeb4cfff irq 18 at device 20.5 on pci0 [...] usbus6 on ohci2 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 21.2 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] re0: <Realtek PCIe GbE Family Controller> port 0xd300-0xd3ff mem 0xd0000000-0xd0003fff irq 18 at device 0.0 on pci4 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: version:1.96.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] pci4: <simple comms, UART> at device 0.1 (no driver attached) [...] pci4: <simple comms, UART> at device 0.2 (no driver attached) [...] pci4: <serial bus> at device 0.3 (no driver attached) [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xcf800-0xd07ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC662 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC662 (Analog 2.0+HP/2.0)> at nid 20,27 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC662 (Analog)> at nid 21 and 25 on hdaa0 [...] ugen1.1: <0x1022 XHCI root HUB> at usbus1 [...] ugen6.1: <AMD OHCI root HUB> at usbus6 [...] uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub1: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] ugen5.1: <AMD EHCI root HUB> at usbus5 [...] ugen4.1: <AMD OHCI root HUB> at usbus4 [...] uhub2: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 [...] uhub3: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] ugen0.1: <0x1022 XHCI root HUB> at usbus0 [...] ugen3.1: <AMD EHCI root HUB> at usbus3 [...] uhub4: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub5: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] ugen2.1: <AMD OHCI root HUB> at usbus2 [...] uhub6: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST3500630NS 3BKS> ATA-7 SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub1: 2 ports with 2 removable, self powered [...] uhub3: 5 ports with 5 removable, self powered [...] uhub6: 5 ports with 5 removable, self powered [...] uhub0: 4 ports with 4 removable, self powered [...] uhub4: 4 ports with 4 removable, self powered [...] uhub2: 5 ports with 5 removable, self powered [...] uhub5: 5 ports with 5 removable, self powered [...] em1: link state changed to UP [...] hdac1: <ATI (0x9902) HDA Controller> mem 0xfeb44000-0xfeb47fff irq 18 at device 1.1 on pci0 [...] hdac1: hdac_get_capabilities: Invalid corb size (0) [...] device_attach: hdac1 attach returned 6 [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] em1: link state changed to DOWN [...] vlan0: changing name to 'em1_vlan4091' [...] vlan1: changing name to 'em1_vlan10' [...] vlan2: changing name to 'em1_vlan20' [...] vlan3: changing name to 'em1_vlan99' [...] re0: link state changed to DOWN [...] em1: link state changed to UP [...] em1_vlan99: link state changed to UP [...] em1_vlan20: link state changed to UP [...] em1_vlan10: link state changed to UP [...] em1_vlan4091: link state changed to UP [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] em0: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] re0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] em0: link state changed to DOWN [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em1_vlan20