[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p5 stable/22.7-n250270-9d1c26e8548 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: AMD A10-5800K APU with Radeon(tm) HD Graphics (3793.05-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x610f01 Family=0x15 Model=0x10 Stepping=1 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC> [...] Structured Extended Features=0x8<BMI1> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 7457931264 (7112 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20201113/tbfadt-796) [...] ioapic0 <Version 2.1> irqs 0-23 [...] Launching APs: 3 2 1 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xd0000000-0xdfffffff,0xfeb00000-0xfeb3ffff irq 17 at device 1.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <ATI Trinity HDA Controller> mem 0xfeb44000-0xfeb47fff irq 18 at device 1.1 on pci0 [...] hdac0: hdac_get_capabilities: Invalid corb size (0) [...] device_attach: hdac0 attach returned 6 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xe0004000-0xe0004fff,0xe0000000-0xe0003fff irq 16 at device 0.0 on pci1 [...] re0: Using 1 MSI-X message [...] re0: turning off MSI enable bit. [...] re0: Chip rev. 0x2c800000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] xhci0: <AMD FCH USB 3.0 controller> mem 0xfeb4a000-0xfeb4bfff irq 18 at device 16.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] xhci1: <AMD FCH USB 3.0 controller> mem 0xfeb48000-0xfeb49fff irq 17 at device 16.1 on pci0 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AMD Hudson-2 AHCI SATA controller> port 0xf190-0xf197,0xf180-0xf183,0xf170-0xf177,0xf160-0xf163,0xf150-0xf15f mem 0xfeb51000-0xfeb517ff irq 19 at device 17.0 on pci0 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ohci0: <AMD FCH USB Controller> mem 0xfeb50000-0xfeb50fff irq 18 at device 18.0 on pci0 [...] usbus2 on ohci0 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD FCH USB 2.0 controller> mem 0xfeb4f000-0xfeb4f0ff irq 17 at device 18.2 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] ohci1: <AMD FCH USB Controller> mem 0xfeb4e000-0xfeb4efff irq 18 at device 19.0 on pci0 [...] usbus4 on ohci1 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD FCH USB 2.0 controller> mem 0xfeb4d000-0xfeb4d0ff irq 17 at device 19.2 on pci0 [...] usbus5: EHCI version 1.0 [...] usbus5 on ehci1 [...] usbus5: 480Mbps High Speed USB v2.0 [...] atapci0: <AMD Hudson-2 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf100-0xf10f at device 20.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] ata1: <ATA channel> at channel 1 on atapci0 [...] hdac0: <AMD Hudson-2 HDA Controller> mem 0xfeb40000-0xfeb43fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] ohci2: <OHCI (generic) USB controller> mem 0xfeb4c000-0xfeb4cfff irq 18 at device 20.5 on pci0 [...] usbus6 on ohci2 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x004200> mem 0xfea10000-0xfea1ffff irq 16 at device 0.0 on pci3 [...] bge0: CHIP ID 0x00004200; ASIC REV 0x04; CHIP REV 0x42; PCI-E [...] miibus1: <MII bus> on bge0 [...] brgphy0: <BCM5750 1000BASE-T media interface> PHY 1 on miibus1 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge0: Ethernet address: ... [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xcf800-0xd0fff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1896455925 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC662 rev1 HDA CODEC> at cad 2 on hdac0 [...] hdaa0: <Realtek ALC662 rev1 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC662 rev1 (Rear Analog)> at nid 20 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC662 rev1 (Front Analog)> at nid 27 and 25 on hdaa0 [...] hdac1: <ATI Trinity HDA Controller> mem 0xfeb44000-0xfeb47fff irq 18 at device 1.1 on pci0 [...] hdac1: hdac_get_capabilities: Invalid corb size (0) [...] ugen3.1: <AMD EHCI root HUB> at usbus3 [...] ugen6.1: <AMD OHCI root HUB> at usbus6 [...] uhub0 on usbus3 [...] uhub0: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] ugen1.1: <AMD XHCI root HUB> at usbus1 [...] ugen2.1: <AMD OHCI root HUB> at usbus2 [...] uhub1 on usbus1 [...] uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] ugen4.1: <AMD OHCI root HUB> at usbus4 [...] ugen0.1: <AMD XHCI root HUB> at usbus0 [...] uhub2 on usbus2 [...] uhub2: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] ugen5.1: <AMD EHCI root HUB> at usbus5 [...] uhub3 on usbus0 [...] uhub3: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub4 on usbus6 [...] uhub4: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] uhub5 on usbus4 [...] uhub5: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] device_attach: hdac1 attach returned 6 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub6 on usbus5 [...] uhub6: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 [...] uhub4: 2 ports with 2 removable, self powered [...] uhub2: 5 ports with 5 removable, self powered [...] uhub5: 5 ports with 5 removable, self powered [...] uhub3: 4 ports with 4 removable, self powered [...] uhub1: 4 ports with 4 removable, self powered [...] Root mount waiting for: CAM usbus3 usbus5 [...] uhub6: 5 ports with 5 removable, self powered [...] uhub0: 5 ports with 5 removable, self powered [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] ada0 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada0: <INTEL SSDSC2MH120A2 PPG4> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] WARNING: /mnt was not properly dismounted [...] WARNING: /mnt: mount pending error: blocks 16 files 0