[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p2 stable/25.1-n269670-fd3d1a7d1e1 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Core(TM) i3-10105 CPU @ 3.70GHz (3700.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xa0653 Family=0x6 Model=0xa5 Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x2b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16490291200 (15726 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <SUPERM SMCI--MB> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 4 7 6 5 3 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x9ebe4000-0x9ebe401e [...] smbios0: Version: 3.3, BCD Revision: 3.3 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <SUPERM SMCI--MB> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] ix0: <Intel(R) X520-1 82599EN (SFP+)> port 0x6000-0x601f mem 0x4000000000-0x400007ffff,0x4000080000-0x4000083fff irq 16 at device 0.0 on pci1 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 4 RX queues 4 TX queues [...] ix0: Using MSI-X interrupts with 5 vectors [...] ix0: allocated for 4 queues [...] ix0: allocated for 4 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix0: eTrack 0x800006e3 [...] ix0: netmap queues/slots: TX 4/2048, RX 4/2048 [...] pci0: <simple comms, UART> at device 18.0 (no driver attached) [...] xhci0: <Intel Tiger Lake-H USB 3.2 controller> mem 0x4000100000-0x400010ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <serial bus> at device 21.1 (no driver attached) [...] pci0: <serial bus> at device 21.3 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.1 (no driver attached) [...] pci0: <simple comms> at device 22.4 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x7050-0x7057,0x7040-0x7043,0x7020-0x703f mem 0xa1400000-0xa1401fff,0xa1403000-0xa14030ff,0xa1402000-0xa14027ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahcich6: <AHCI channel> at channel 6 on ahci0 [...] ahcich7: <AHCI channel> at channel 7 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pci0: <serial bus> at device 25.0 (no driver attached) [...] pci0: <serial bus> at device 25.1 (no driver attached) [...] pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.5 on pci0 [...] pci2: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 0.0 on pci2 [...] pci3: <ACPI PCI bus> on pcib4 [...] vgapci0: <VGA-compatible display> port 0x5000-0x507f mem 0xa0000000-0xa0ffffff,0xa1000000-0xa103ffff irq 17 at device 0.0 on pci3 [...] vgapci0: Boot video device [...] pcib5: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci4: <ACPI PCI bus> on pcib5 [...] igb0: <Intel(R) I210 (Copper)> port 0x4000-0x401f mem 0xa1200000-0xa127ffff,0xa1280000-0xa1283fff at device 0.0 on pci4 [...] igb0: EEPROM V3.30-0 eTrack 0x8000079c [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib6: <ACPI PCI-PCI bridge> at device 28.7 on pci0 [...] pci5: <ACPI PCI bus> on pcib6 [...] igb1: <Intel(R) I210 (Copper)> port 0x3000-0x301f mem 0xa1100000-0xa117ffff,0xa1180000-0xa1183fff at device 0.0 on pci5 [...] igb1: EEPROM V3.30-0 eTrack 0x80000777 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1848005151 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SAMSUNG MZ7L3240HCHQ-00A07 JXTC604Q> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <SAMSUNG MZ7L3240HCHQ-00A07 JXTC604Q> ACS-4 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 228936MB (468862128 512 byte sectors) [...] ada1: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ses0 at ahciem0 bus 0 scbus8 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] GEOM_MIRROR: Device mirror/swap launched (2/2). [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] uhub0: 22 ports with 22 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <Aspeed USB Virtual Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <Aspeed USB Virtual Hub, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub1: 7 ports with 7 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.3: <Linux 5.1.3-2965b36-dirty-17921c0 with aspeedvhub SMCI HID KM> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <Linux 5.1.3-2965b36-dirty-17921c0 with aspeedvhub SMCI HID KM, class 0/0, rev 2.00/5.01, addr 2> on usbus0 [...] kbd1 at ukbd0 [...] ugen0.4: <Linux 5.1.3-2965b36-dirty-17921c0 with aspeedvhub RNDIS/Ethernet Gadget> at usbus0 [...] uhub_explore: illegal enable change, port 1 [...] uhub_explore: illegal enable change, port 2 [...] Dual Console: Video Primary, Serial Secondary