[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p2 stable/24.7-n267758-4ad7ad40bc77 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(efifb): resolution 800x600 [...] CPU: AMD Ryzen 5 PRO 2400G with Radeon Vega Graphics (3593.41-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x810f10 Family=0x17 Model=0x11 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX> [...] Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr,IBPB> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 31143227392 (29700 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <LENOVO TC-M25 > [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 4 5 2 6 3 1 7 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x5ca44000-0x5ca4401e [...] smbios0: Version: 3.2, BCD Revision: 3.2 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <LENOVO TC-M25> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I350 (Copper)> mem 0xfc600000-0xfc6fffff,0xfc90c000-0xfc90ffff irq 24 at device 0.0 on pci1 [...] igb0: EEPROM V1.63-0 eTrack 0x80000e85 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0xfc500000-0xfc5fffff,0xfc908000-0xfc90bfff irq 25 at device 0.1 on pci1 [...] igb1: EEPROM V1.63-0 eTrack 0x80000e85 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0xfc400000-0xfc4fffff,0xfc904000-0xfc907fff irq 26 at device 0.2 on pci1 [...] igb2: EEPROM V1.63-0 eTrack 0x80000e85 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0xfc300000-0xfc3fffff,0xfc900000-0xfc903fff irq 27 at device 0.3 on pci1 [...] igb3: EEPROM V1.63-0 eTrack 0x80000e85 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 1.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] xhci0: <AMD 400 Series USB 3.1 controller> mem 0xfd0a0000-0xfd0a7fff irq 28 at device 0.0 on pci2 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AHCI SATA controller> mem 0xfd080000-0xfd09ffff irq 29 at device 0.1 on pci2 [...] ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 30 at device 0.2 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 29 at device 1.0 on pci3 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> irq 28 at device 4.0 on pci3 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> irq 30 at device 6.0 on pci3 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <PCI-PCI bridge> irq 30 at device 0.0 on pci7 [...] pci8: <PCI bus> on pcib8 [...] pcib9: <ACPI PCI-PCI bridge> at device 1.6 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] nvme0: <Generic NVMe Device> mem 0xfcf00000-0xfcf03fff irq 44 at device 0.0 on pci9 [...] pcib10: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xe0000000-0xefffffff,0xf0000000-0xf01fffff,0xfcd00000-0xfcd7ffff irq 52 at device 0.0 on pci10 [...] vgapci0: Boot video device [...] hdac0: <ATI (0x15de) HDA Controller> mem 0xfcdc8000-0xfcdcbfff irq 53 at device 0.1 on pci10 [...] pci10: <encrypt/decrypt> at device 0.2 (no driver attached) [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfcb00000-0xfcbfffff irq 55 at device 0.3 on pci10 [...] xhci1: 64 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] xhci2: <XHCI (generic) USB 3.0 controller> mem 0xfca00000-0xfcafffff irq 52 at device 0.4 on pci10 [...] xhci2: 64 bytes context size, 64-bit DMA [...] usbus2 on xhci2 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] pci10: <multimedia> at device 0.5 (no driver attached) [...] hdac1: <AMD Raven HDA Controller> mem 0xfcdc0000-0xfcdc7fff irq 54 at device 0.6 on pci10 [...] pcib11: <ACPI PCI-PCI bridge> at device 8.2 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xfce00000-0xfce007ff irq 54 at device 0.0 on pci11 [...] ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS [...] ahcich8: <AHCI channel> at channel 0 on ahci1 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1796625063 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen2.1: <AMD XHCI root HUB> at usbus2 [...] ugen1.1: <AMD XHCI root HUB> at usbus1 [...] ugen0.1: <AMD XHCI root HUB> at usbus0 [...] uhub0 on usbus2 [...] uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] uhub1 on usbus1 [...] uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub2 on usbus0 [...] uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] nvme0: Allocated 64MB host memory buffer [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] hdacc1: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc1 [...] pcm4: <Realtek ALC662 rev3 (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm5: <Realtek ALC662 rev3 (Analog)> at nid 21 and 25 on hdaa1 [...] pcm6: <Realtek ALC662 rev3 (Front Analog Headphones)> at nid 27 on hdaa1 [...] nda0 at nvme0 bus 0 scbus5 target 0 lun 1 [...] nda0: <Samsung SSD 980 250GB 1B4QFXO7 S64BNF0R823953M> [...] nda0: Serial Number... [...] nda0: nvme version 1.4 [...] nda0: 238475MB (488397168 512 byte sectors) [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SAMSUNG MZ7LN256HAJQ-000L7 MVT05L6Q> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] uhub0: 2 ports with 2 removable, self powered [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub1: 8 ports with 8 removable, self powered [...] uhub2: 22 ports with 22 removable, self powered [...] ugen1.2: <EATON Eaton 3S> at usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb3: link state changed to UP [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134WMI1.WQCA: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] lo0: link state changed to UP [...] amdsmn0: <AMD Family 17h System Management Network> on hostb0 [...] amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb0 [...] pflog0: permanently promiscuous mode enabled [...] igb1: link state changed to DOWN [...] igb3: link state changed to DOWN [...] igb0: link state changed to DOWN [...] igb1: link state changed to UP [...] igb0: link state changed to UP [...] igb3: link state changed to UP [...] 874.826071 [ 850] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 875.684961 [ 850] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igb1: link state changed to DOWN [...] igb1: link state changed to UP [...] 971.636372 [ 850] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 971.636395 [ 850] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 971.636410 [ 850] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igb0: permanently promiscuous mode enabled [...] 971.638797 [ 850] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igb0: link state changed to DOWN [...] 972.966527 [ 850] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 972.966554 [ 850] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 972.966571 [ 850] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igb0: link state changed to UP [...] igb0: permanently promiscuous mode disabled [...] pid 37265 (squid), jid 0, uid 100: exited on signal 11 (no core dump - bad address) [...] igb1: promiscuous mode enabled [...] igb3: promiscuous mode enabled [...] igb1: promiscuous mode disabled [...] igb3: promiscuous mode disabled [...] igb1: promiscuous mode enabled [...] igb3: promiscuous mode enabled [...] igb1: promiscuous mode disabled [...] igb3: promiscuous mode disabled [...] igb1: promiscuous mode enabled [...] igb3: promiscuous mode enabled [...] pid 29440 (wazuh-modulesd), jid 0, uid 0: exited on signal 4 (no core dump - bad address) [...] igb1: promiscuous mode disabled [...] igb3: promiscuous mode disabled [...] igb1: promiscuous mode enabled [...] igb3: promiscuous mode enabled [...] igb0: promiscuous mode enabled [...] igb1: promiscuous mode disabled [...] igb3: promiscuous mode disabled [...] igb0: promiscuous mode disabled [...] igb1: promiscuous mode enabled [...] igb3: promiscuous mode enabled [...] igb0: promiscuous mode enabled [...] igb1: promiscuous mode disabled [...] igb3: promiscuous mode disabled [...] igb0: promiscuous mode disabled [...] igb1: promiscuous mode enabled [...] igb3: promiscuous mode enabled [...] igb1: promiscuous mode disabled [...] igb3: promiscuous mode disabled [...] igb1: promiscuous mode enabled [...] igb3: promiscuous mode enabled [...] igb1: promiscuous mode disabled [...] igb3: promiscuous mode disabled [...] pid 87033 (squid), jid 0, uid 100: exited on signal 11 (no core dump - bad address) [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb1: link state changed to DOWN [...] igb1: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 1 1 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 1d13h37m43s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p3 stable/24.7-n267778-bb2c86773c1b SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(efifb): resolution 800x600 [...] CPU: AMD Ryzen 5 PRO 2400G with Radeon Vega Graphics (3593.36-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x810f10 Family=0x17 Model=0x11 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX> [...] Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr,IBPB> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 31143243776 (29700 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <LENOVO TC-M25 > [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 4 1 6 5 7 3 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x5ca44000-0x5ca4401e [...] smbios0: Version: 3.2, BCD Revision: 3.2 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <LENOVO TC-M25> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I350 (Copper)> mem 0xfc600000-0xfc6fffff,0xfc90c000-0xfc90ffff irq 24 at device 0.0 on pci1 [...] igb0: EEPROM V1.63-0 eTrack 0x80000e85 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0xfc500000-0xfc5fffff,0xfc908000-0xfc90bfff irq 25 at device 0.1 on pci1 [...] igb1: EEPROM V1.63-0 eTrack 0x80000e85 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0xfc400000-0xfc4fffff,0xfc904000-0xfc907fff irq 26 at device 0.2 on pci1 [...] igb2: EEPROM V1.63-0 eTrack 0x80000e85 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0xfc300000-0xfc3fffff,0xfc900000-0xfc903fff irq 27 at device 0.3 on pci1 [...] igb3: EEPROM V1.63-0 eTrack 0x80000e85 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 1.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] xhci0: <AMD 400 Series USB 3.1 controller> mem 0xfd0a0000-0xfd0a7fff irq 28 at device 0.0 on pci2 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AHCI SATA controller> mem 0xfd080000-0xfd09ffff irq 29 at device 0.1 on pci2 [...] ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 30 at device 0.2 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 29 at device 1.0 on pci3 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> irq 28 at device 4.0 on pci3 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> irq 30 at device 6.0 on pci3 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <PCI-PCI bridge> irq 30 at device 0.0 on pci7 [...] pci8: <PCI bus> on pcib8 [...] pcib9: <ACPI PCI-PCI bridge> at device 1.6 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] nvme0: <Generic NVMe Device> mem 0xfcf00000-0xfcf03fff irq 44 at device 0.0 on pci9 [...] pcib10: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xe0000000-0xefffffff,0xf0000000-0xf01fffff,0xfcd00000-0xfcd7ffff irq 52 at device 0.0 on pci10 [...] vgapci0: Boot video device [...] hdac0: <ATI (0x15de) HDA Controller> mem 0xfcdc8000-0xfcdcbfff irq 53 at device 0.1 on pci10 [...] pci10: <encrypt/decrypt> at device 0.2 (no driver attached) [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfcb00000-0xfcbfffff irq 55 at device 0.3 on pci10 [...] xhci1: 64 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] xhci2: <XHCI (generic) USB 3.0 controller> mem 0xfca00000-0xfcafffff irq 52 at device 0.4 on pci10 [...] xhci2: 64 bytes context size, 64-bit DMA [...] usbus2 on xhci2 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] pci10: <multimedia> at device 0.5 (no driver attached) [...] hdac1: <AMD Raven HDA Controller> mem 0xfcdc0000-0xfcdc7fff irq 54 at device 0.6 on pci10 [...] pcib11: <ACPI PCI-PCI bridge> at device 8.2 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xfce00000-0xfce007ff irq 54 at device 0.0 on pci11 [...] ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS [...] ahcich8: <AHCI channel> at channel 0 on ahci1 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1796625225 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen1.1: <AMD XHCI root HUB> at usbus1 [...] ugen0.1: <AMD XHCI root HUB> at usbus0 [...] ugen2.1: <AMD XHCI root HUB> at usbus2 [...] uhub0 on usbus1 [...] uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus0 [...] uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub2 on usbus2 [...] uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] nvme0: Allocated 64MB host memory buffer [...] uhub2: 2 ports with 2 removable, self powered [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] hdacc1: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc1 [...] pcm4: <Realtek ALC662 rev3 (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm5: <Realtek ALC662 rev3 (Analog)> at nid 21 and 25 on hdaa1 [...] pcm6: <Realtek ALC662 rev3 (Front Analog Headphones)> at nid 27 on hdaa1 [...] nda0 at nvme0 bus 0 scbus5 target 0 lun 1 [...] nda0: <Samsung SSD 980 250GB 1B4QFXO7 S64BNF0R823953M> [...] nda0: Serial Number... [...] nda0: nvme version 1.4 [...] nda0: 238475MB (488397168 512 byte sectors) [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SAMSUNG MZ7LN256HAJQ-000L7 MVT05L6Q> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 8 ports with 8 removable, self powered [...] uhub1: 22 ports with 22 removable, self powered [...] ugen1.2: <EATON Eaton 3S> at usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1