[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p5 stable/24.7-n267855-304cf693716 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU microcode: updated from 0xd6 to 0xf0 [...] CPU: Intel(R) Core(TM) i5-6500T CPU @ 2.50GHz (2500.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc04<RSBA> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33162838016 (31626 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 2 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x5ae14000-0x5ae1401e [...] smbios0: Version: 3.0, BCD Revision: 3.0 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0x2ffe000000-0x2ffeffffff,0x80000000-0xbfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0x2fff010000-0x2fff01ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdff04000-0xdff05fff,0xdff07000-0xdff070ff,0xdff06000-0xdff067ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0xdfe04000-0xdfe04fff,0xdfe00000-0xdfe03fff irq 16 at device 0.0 on pci1 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.100.00 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re1: <Realtek PCIe GbE Family Controller> port 0xd000-0xd0ff mem 0xdfd04000-0xdfd04fff,0xdfd00000-0xdfd03fff irq 17 at device 0.0 on pci2 [...] re1: Using Memory Mapping! [...] re1: Using 1 MSI-X message [...] re1: ASPM disabled [...] re1: version:1.100.00 [...] re1: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] iwn0: <Intel Centrino Ultimate-N 6300> mem 0xdfc00000-0xdfc01fff irq 16 at device 0.0 on pci3 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel Sunrise Point HDA Controller> mem 0x2fff020000-0x2fff023fff,0x2fff000000-0x2fff00ffff irq 16 at device 31.3 on pci0 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] acpi_tz2: <Thermal Zone> on acpi0 [...] uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] uart1: <16950 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] uart2: <16950 or compatible> port 0x3e8-0x3ef irq 6 on acpi0 [...] uart3: <16950 or compatible> port 0x2e8-0x2ef irq 6 on acpi0 [...] uart4: <16950 or compatible> port 0xc80-0xc87 irq 5 on acpi0 [...] uart5: <16950 or compatible> port 0xc88-0xc8f irq 5 on acpi0 [...] uart6: <16950 or compatible> port 0xc90-0xc97 irq 5 on acpi0 [...] uart7: <16950 or compatible> port 0xc98-0xc9f irq 5 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC-low" frequency 1247997601 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Realtek ALC888 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc0 [...] hdaa0: hdaa_audio_as_parse: Duplicate pin 0 (30) in association 3! Disabling association. [...] pcm0: <Realtek ALC888 (Rear Analog)> at nid 20 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC888 (Analog)> at nid 21 and 25 on hdaa0 [...] hdacc1: <Intel Skylake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Skylake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Skylake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SanDisk SDSSDP064G 3.1.0> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 60103MB (123091920 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 20 ports with 20 removable, self powered [...] ugen0.2: <vendor 0x0424 product 0x2514> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 1> on usbus0 [...] uhub1: MTT enabled [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.3: <Logitech USB Receiver> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.11, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.4: <USB SanDisk 3.2Gen1> at usbus0 [...] umass0 on uhub0 [...] umass0: <USB SanDisk 3.2Gen1, class 0/0, rev 3.20/1.00, addr 3> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4001 [...] umass0:5:0: Attached to scbus5 [...] da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 [...] da0: <USB SanDisk 3.2Gen1 1.00> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: 58674MB (120164352 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] CPU: Intel(R) Core(TM) i5-6500T CPU @ 2.50GHz (2496.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc04<RSBA> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] pchtherm0: <Skylake PCH 100 Thermal Subsystem> mem 0x2fff027000-0x2fff027fff irq 18 at device 20.2 on pci0 [...] ig4iic0: <Intel Sunrise Point-H I2C Controller-0> mem 0x2fff026000-0x2fff026fff irq 16 at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] ichsmb0: <Intel Sunrise Point-H SMBus controller> port 0xf040-0xf05f mem 0x2fff024000-0x2fff0240ff irq 16 at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] ums0 on uhub0 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.11, addr 2> on usbus0 [...] ums0: 16 buttons and [XYZT] coordinates ID=2 [...] uhid0 on uhub0 [...] uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.11, addr 2> on usbus0 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] re1: link state changed to UP [...] ng0: changing name to 'pppoe0' [...] wlan0: Ethernet address: ... [...] wlan0: changing name to 'iwn0_wlan1' [...] iwn0: iwn_read_firmware: ucode rev=0x09dd0401 [...] re0: link state changed to UP [...] ugen0.4: <USB SanDisk 3.2Gen1> at usbus0 (disconnected) [...] umass0: at uhub0, port 20, addr 3 (disconnected) [...] da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 [...] da0: <USB SanDisk 3.2Gen1 1.00> s/n ... detached [...] (da0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] ugen0.3: <Logitech USB Receiver> at usbus0 (disconnected) [...] ukbd0: at uhub0, port 8, addr 2 (disconnected) [...] ukbd0: detached [...] ums0: at uhub0, port 8, addr 2 (disconnected) [...] ums0: detached [...] uhid0: at uhub0, port 8, addr 2 (disconnected) [...] uhid0: detached [...] ugen0.3: <Logitech USB Receiver> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.11, addr 4> on usbus0 [...] kbd2 at ukbd0 [...] ums0 on uhub0 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.11, addr 4> on usbus0 [...] ums0: 16 buttons and [XYZT] coordinates ID=2 [...] uhid0 on uhub0 [...] uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.11, addr 4> on usbus0 [...] ugen0.4: <USB SanDisk 3.2Gen1> at usbus0 [...] umass0 on uhub0 [...] umass0: <USB SanDisk 3.2Gen1, class 0/0, rev 2.10/1.00, addr 5> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4001 [...] umass0:5:0: Attached to scbus5 [...] da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 [...] da0: <USB SanDisk 3.2Gen1 1.00> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 58674MB (120164352 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] ugen0.4: <USB SanDisk 3.2Gen1> at usbus0 (disconnected) [...] umass0: at uhub0, port 7, addr 5 (disconnected) [...] da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 [...] da0: <USB SanDisk 3.2Gen1 1.00> s/n ... detached [...] (da0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] ugen0.4: <USB SanDisk 3.2Gen1> at usbus0 [...] umass0 on uhub0 [...] umass0: <USB SanDisk 3.2Gen1, class 0/0, rev 2.10/1.00, addr 6> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4001 [...] umass0:5:0: Attached to scbus5 [...] da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 [...] da0: <USB SanDisk 3.2Gen1 1.00> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 58674MB (120164352 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p5 stable/24.7-n267855-304cf693716 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU microcode: updated from 0xd6 to 0xf0 [...] CPU: Intel(R) Core(TM) i5-6500T CPU @ 2.50GHz (2500.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc04<RSBA> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33162838016 (31626 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 2 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x5ae14000-0x5ae1401e [...] smbios0: Version: 3.0, BCD Revision: 3.0 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0x2ffe000000-0x2ffeffffff,0x80000000-0xbfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0x2fff010000-0x2fff01ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdff04000-0xdff05fff,0xdff07000-0xdff070ff,0xdff06000-0xdff067ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0xdfe04000-0xdfe04fff,0xdfe00000-0xdfe03fff irq 16 at device 0.0 on pci1 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.100.00 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re1: <Realtek PCIe GbE Family Controller> port 0xd000-0xd0ff mem 0xdfd04000-0xdfd04fff,0xdfd00000-0xdfd03fff irq 17 at device 0.0 on pci2 [...] re1: Using Memory Mapping! [...] re1: Using 1 MSI-X message [...] re1: ASPM disabled [...] re1: version:1.100.00 [...] re1: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] iwn0: <Intel Centrino Ultimate-N 6300> mem 0xdfc00000-0xdfc01fff irq 16 at device 0.0 on pci3 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel Sunrise Point HDA Controller> mem 0x2fff020000-0x2fff023fff,0x2fff000000-0x2fff00ffff irq 16 at device 31.3 on pci0 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] acpi_tz2: <Thermal Zone> on acpi0 [...] uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] uart1: <16950 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] uart2: <16950 or compatible> port 0x3e8-0x3ef irq 6 on acpi0 [...] uart3: <16950 or compatible> port 0x2e8-0x2ef irq 6 on acpi0 [...] uart4: <16950 or compatible> port 0xc80-0xc87 irq 5 on acpi0 [...] uart5: <16950 or compatible> port 0xc88-0xc8f irq 5 on acpi0 [...] uart6: <16950 or compatible> port 0xc90-0xc97 irq 5 on acpi0 [...] uart7: <16950 or compatible> port 0xc98-0xc9f irq 5 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC-low" frequency 1247997542 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Realtek ALC888 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc0 [...] hdaa0: hdaa_audio_as_parse: Duplicate pin 0 (30) in association 3! Disabling association. [...] pcm0: <Realtek ALC888 (Rear Analog)> at nid 20 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC888 (Analog)> at nid 21 and 25 on hdaa0 [...] hdacc1: <Intel Skylake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Skylake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Skylake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SanDisk SDSSDP064G 3.1.0> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 60103MB (123091920 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0 on usbus0 [...] WARNING: / was not properly dismounted [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] WARNING: /: mount pending error: blocks 8 files 14 [...] uhub0: 20 ports with 20 removable, self powered [...] ugen0.2: <Logitech USB Receiver> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.11, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.3: <vendor 0x0424 product 0x2514> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 2> on usbus0 [...] uhub1: MTT enabled [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.4: <USB SanDisk 3.2Gen1> at usbus0 [...] umass0 on uhub0 [...] umass0: <USB SanDisk 3.2Gen1, class 0/0, rev 2.10/1.00, addr 3> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4001 [...] umass0:5:0: Attached to scbus5 [...] da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 [...] da0: <USB SanDisk 3.2Gen1 1.00> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 58674MB (120164352 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE>