[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p11 stable/24.1-n255023-99a14409566 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Xeon(R) CPU E5-2650 v4 @ 2.20GHz (2200.12-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x406f1 Family=0x6 Model=0x4f Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x21cbfbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,RDSEED,ADX,SMAP,PROCTRACE> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16486957056 (15723 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 24 CPUs [...] FreeBSD/SMP: 1 package(s) x 12 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-47 [...] Launching APs: 1 2 7 8 23 13 12 14 4 6 22 10 15 5 17 18 21 11 16 9 19 3 20 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe [...] smbios0: Version: 3.0, BCD Revision: 3.0 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> numa-domain 0 on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <dasp, performance counters> at device 11.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 11.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.6 (no driver attached) [...] pci0: <dasp, performance counters> at device 18.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 18.5 (no driver attached) [...] acpi_syscontainer0: <System Container> on acpi0 [...] pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci1: <ACPI PCI bus> numa-domain 0 on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 26 at device 1.0 numa-domain 0 on pci1 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 26 at device 1.1 numa-domain 0 on pci1 [...] pci3: <ACPI PCI bus> numa-domain 0 on pcib3 [...] nvme0: <Generic NVMe Device> mem 0xfbe00000-0xfbe03fff,0xfbe04000-0xfbe040ff irq 27 at device 0.0 numa-domain 0 on pci3 [...] pcib4: <ACPI PCI-PCI bridge> irq 40 at device 3.0 numa-domain 0 on pci1 [...] pci4: <ACPI PCI bus> numa-domain 0 on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 0 on pci4 [...] pci5: <ACPI PCI bus> numa-domain 0 on pcib5 [...] pcib6: <PCI-PCI bridge> at device 2.0 numa-domain 0 on pci5 [...] pci6: <PCI bus> numa-domain 0 on pcib6 [...] igb0: <Intel(R) PRO/1000 VT 82575GB (Quad Copper)> port 0xd020-0xd03f mem 0xfbc20000-0xfbc3ffff,0xfba00000-0xfbbfffff,0xfbc44000-0xfbc47fff irq 45 at device 0.0 numa-domain 0 on pci6 [...] igb0: EEPROM V1.77-0 eTrack 0x880c0000 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) PRO/1000 VT 82575GB (Quad Copper)> port 0xd000-0xd01f mem 0xfbc00000-0xfbc1ffff,0xfb800000-0xfb9fffff,0xfbc40000-0xfbc43fff irq 46 at device 0.1 numa-domain 0 on pci6 [...] igb1: EEPROM V1.77-0 eTrack 0x880c0000 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib7: <PCI-PCI bridge> at device 4.0 numa-domain 0 on pci5 [...] pci7: <PCI bus> numa-domain 0 on pcib7 [...] igb2: <Intel(R) PRO/1000 VT 82575GB (Quad Copper)> port 0xc020-0xc03f mem 0xfb620000-0xfb63ffff,0xfb400000-0xfb5fffff,0xfb644000-0xfb647fff irq 40 at device 0.0 numa-domain 0 on pci7 [...] igb2: EEPROM V1.77-0 eTrack 0x880e0000 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) PRO/1000 VT 82575GB (Quad Copper)> port 0xc000-0xc01f mem 0xfb600000-0xfb61ffff,0xfb200000-0xfb3fffff,0xfb640000-0xfb643fff irq 44 at device 0.1 numa-domain 0 on pci7 [...] igb3: EEPROM V1.77-0 eTrack 0x880e0000 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xfbf07000-0xfbf073ff irq 16 at device 26.0 numa-domain 0 on pci1 [...] usbus0: EHCI version 1.0 [...] usbus0 numa-domain 0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Ibex Peak HDA Controller> mem 0xfbf00000-0xfbf03fff irq 22 at device 27.0 numa-domain 0 on pci1 [...] pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci1 [...] pcib9: <ACPI PCI-PCI bridge> irq 17 at device 28.1 numa-domain 0 on pci1 [...] pci8: <ACPI PCI bus> numa-domain 0 on pcib9 [...] pcib10: <ACPI PCI-PCI bridge> irq 18 at device 28.2 numa-domain 0 on pci1 [...] pci9: <ACPI PCI bus> numa-domain 0 on pcib10 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfbd04000-0xfbd04fff,0xfbd00000-0xfbd03fff irq 18 at device 0.0 numa-domain 0 on pci9 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x50800000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> numa-domain 0 on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib11: <ACPI PCI-PCI bridge> irq 19 at device 28.3 numa-domain 0 on pci1 [...] pci10: <ACPI PCI bus> numa-domain 0 on pcib11 [...] pcib12: <ACPI PCI-PCI bridge> irq 16 at device 28.4 numa-domain 0 on pci1 [...] pci11: <ACPI PCI bus> numa-domain 0 on pcib12 [...] pcib13: <ACPI PCI-PCI bridge> irq 17 at device 28.5 numa-domain 0 on pci1 [...] pci12: <ACPI PCI bus> numa-domain 0 on pcib13 [...] ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xfbf06000-0xfbf063ff irq 23 at device 29.0 numa-domain 0 on pci1 [...] usbus1: EHCI version 1.0 [...] usbus1 numa-domain 0 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib14: <ACPI PCI-PCI bridge> at device 30.0 numa-domain 0 on pci1 [...] pci13: <ACPI PCI bus> numa-domain 0 on pcib14 [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci1 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] ahci0: <Intel Ibex Peak-M AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xfbf05000-0xfbf057ff irq 19 at device 31.2 numa-domain 0 on pci1 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0 [...] Timecounter "TSC-low" frequency 1099999733 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 numa-domain 0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1 numa-domain 0 on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] nvd0: <WDS500G3X0C-00SJG0> NVMe namespace [...] nvd0: 476940MB (976773168 512 byte sectors) [...] hdacc0: <Realtek ALC897 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC897 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC897 (Rear Analog)> at nid 20 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC897 (Front Analog)> at nid 27 and 25 on hdaa0 [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 usbus1 [...] Root mount waiting for: usbus0 usbus1 [...] uhub1: 6 ports with 6 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] ugen0.2: <vendor 0x8087 product 0x0020> at usbus0 [...] uhub2 numa-domain 0 on uhub1 [...] uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] uhub0: 8 ports with 8 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x0020> at usbus1 [...] uhub3 numa-domain 0 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] uhub2: 6 ports with 6 removable, self powered [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] uhub3: 8 ports with 8 removable, self powered