[...] ---<<BOOT>>--- [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE r354233 GENERIC amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] CPU: AMD FX(tm)-4300 Quad-Core Processor (3817.22-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC> [...] Structured Extended Features=0x8<BMI1> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8241287168 (7859 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <092011 APIC2035> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] arc4random: no preloaded entropy cache [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20181213/tbfadt-796) [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20181213/tbfadt-748) [...] ioapic0: Changing APIC ID to 20 [...] ioapic0 <Version 2.1> irqs 0-23 on motherboard [...] Launching APs: 1 3 2 [...] Timecounter "TSC-low" frequency 1908609850 Hz quality 1000 [...] random: entropy device external interface [...] md0: Preloaded image </data/XXXXXXXXXXXX 14417920 bytes at 0xffffffff82a309a8 [...] 000.000080 [4335] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8112e050, 0) error 19 [...] kbd1 at kbdmux0 [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <092011 XSDT2035> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 450 [...] Event timer "HPET2" frequency 14318180 Hz quality 450 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xdc00-0xdc7f mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xce000000-0xcfffffff irq 18 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x0e1b) HDA Controller> mem 0xfebf8000-0xfebfbfff irq 19 at device 0.1 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfbfff000-0xfbffffff,0xfbff8000-0xfbffbfff irq 16 at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x2c800000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfcfffc00-0xfcffffff irq 22 at device 17.0 on pci0 [...] ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfcffe000-0xfcffefff irq 16 at device 18.0 on pci0 [...] usbus0 on ohci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfcffd000-0xfcffdfff irq 16 at device 18.1 on pci0 [...] usbus1 on ohci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfcfff800-0xfcfff8ff irq 17 at device 18.2 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci0 [...] usbus2: 480Mbps High Speed USB v2.0 [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfcffc000-0xfcffcfff irq 18 at device 19.0 on pci0 [...] usbus3 on ohci2 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfcffb000-0xfcffbfff irq 18 at device 19.1 on pci0 [...] usbus4 on ohci3 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfcfff400-0xfcfff4ff irq 19 at device 19.2 on pci0 [...] usbus5: EHCI version 1.0 [...] usbus5 on ehci1 [...] usbus5: 480Mbps High Speed USB v2.0 [...] atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] ata1: <ATA channel> at channel 1 on atapci0 [...] hdac1: <ATI SB600 HDA Controller> mem 0xfcff4000-0xfcff7fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfcffa000-0xfcffafff irq 18 at device 20.5 on pci0 [...] usbus6 on ohci4 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] acpi_button0: <Power Button> on acpi0 [...] ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 [...] ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc0 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior. [...] Consider tuning vm.kmem_size and vm.kmem_size_max [...] in /boot/loader.conf. [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] arc4random: no preloaded entropy cache [...] hdacc0: <NVIDIA (0x0042) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0042) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm2: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm4: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm5: <Realtek ALC887 (Onboard Digital)> at nid 17 on hdaa1 [...] ugen6.1: <ATI OHCI root HUB> at usbus6 [...] ugen5.1: <ATI EHCI root HUB> at usbus5 [...] uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] ugen3.1: <ATI OHCI root HUB> at usbus3 [...] uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 [...] ugen4.1: <ATI OHCI root HUB> at usbus4 [...] ugen2.1: <ATI EHCI root HUB> at usbus2 [...] ugen0.1: <ATI OHCI root HUB> at usbus0 [...] uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] ugen1.1: <ATI OHCI root HUB> at usbus1 [...] uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub5: 3 ports with 3 removable, self powered [...] uhub6: 3 ports with 3 removable, self powered [...] uhub3: 3 ports with 3 removable, self powered [...] uhub1: 3 ports with 3 removable, self powered [...] uhub2: 6 ports with 6 removable, self powered [...] uhub4: 6 ports with 6 removable, self powered [...] ada0 at ata1 bus 0 scbus5 target 1 lun 0 [...] ada0: <WDC WD5000AVCS-632DY1 01.00A01> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 150.000MB/s transfers (SATA, UDMA6, PIO 8192bytes) [...] ada0: 476940MB (976773168 512 byte sectors) [...] Trying to mount root from ufs:/dev/md0 []... [...] Root mount waiting for: usbus2 [...] ugen0.2: <Logitech USB Optical Mouse> at usbus0 [...] ugen0.3: <SEMICO USB Keyboard> at usbus0 [...] ukbd0 on uhub5 [...] ukbd0: <SEMICO USB Keyboard, class 0/0, rev 1.10/1.10, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] ukbd1 on uhub5 [...] ukbd1: <SEMICO USB Keyboard, class 0/0, rev 1.10/1.10, addr 3> on usbus0 [...] kbd3 at ukbd1 [...] Root mount waiting for: usbus2 [...] ugen2.2: <Kingston DT 101 G2> at usbus2 [...] umass0 on uhub4 [...] umass0: <Kingston DT 101 G2, class 0/0, rev 2.00/1.00, addr 2> on usbus2 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:6:0: Attached to scbus6 [...] da0 at umass-sim0 bus 0 scbus6 target 0 lun 0 [...] da0: <Kingston DT 101 G2 1.00> Removable Direct Access SPC-2 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 3695MB (7567964 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] ugen2.3: <Generic USB2.0-CRW> at usbus2 [...] umass1 on uhub4 [...] umass1: <Bulk-In, Bulk-Out, Interface> on usbus2 [...] umass1: SCSI over Bulk-Only; quirks = 0x4000 [...] umass1:7:1: Attached to scbus7 [...] random: unblocking device. [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] da1 at umass-sim1 bus 1 scbus7 target 0 lun 0 [...] da1: <Generic- Compact Flash 1.00> Removable Direct Access SCSI device [...] da1: Serial Number... [...] da1: 40.000MB/s transfers [...] da1: Attempt to query device size failed: NOT READY, Medium not present [...] da1: quirks=0x2<NO_6_BYTE> [...] da2 at umass-sim1 bus 1 scbus7 target 0 lun 1 [...] da2: <Generic- SM/xD-Picture 1.00> Removable Direct Access SCSI device [...] da2: Serial Number... [...] da2: 40.000MB/s transfers [...] da2: Attempt to query device size failed: NOT READY, Medium not present [...] da2: quirks=0x2<NO_6_BYTE> [...] da3 at umass-sim1 bus 1 scbus7 target 0 lun 2 [...] da3: <Generic- SD/MMC 1.00> Removable Direct Access SCSI device [...] da3: Serial Number... [...] da3: 40.000MB/s transfers [...] da3: Attempt to query device size failed: NOT READY, Medium not present [...] da3: quirks=0x2<NO_6_BYTE> [...] da4 at umass-sim1 bus 1 scbus7 target 0 lun 3 [...] da4: <Generic- MS/MS-Pro 1.00> Removable Direct Access SCSI device [...] da4: Serial Number... [...] da4: 40.000MB/s transfers [...] da4: Attempt to query device size failed: NOT READY, Medium not present [...] da4: quirks=0x2<NO_6_BYTE> [...] ugen0.2: <Logitech USB Optical Mouse> at usbus0 (disconnected) [...] ugen0.2: <Logitech USB Optical Mouse> at usbus0 [...] ugen0.2: <Logitech USB Optical Mouse> at usbus0 (disconnected) [...] ugen0.2: <Logitech USB Optical Mouse> at usbus0 [...] Trying to mount root from zfs:livecd []... [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 [...] intsmb0: intr SMI enabled revision 0 [...] intsmb0: using polling mode when configured interrupt is SMI [...] smbus0: <System Management Bus> on intsmb0 [...] ums0 on uhub5 [...] ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 2> on usbus0 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] nvidia0: <Unknown> on vgapci0 [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: child nvidia0 requested pci_enable_io [...] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 440.100 Fri May 29 08:11:49 UTC 2020 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] device_attach: acpi_wmi0 attach returned 6 [...] interface fusefs.1 already present in the KLD 'fuse.ko'! [...] linker_load_file: /boot/kernel/fusefs.ko - unsupported file type