[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p11 stable/24.1-n255007-1d6e165fb40 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(efifb): resolution 640x480 [...] CPU: Intel(R) Xeon(R) CPU E3-1220 V2 @ 3.10GHz (3093.09-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 6442450944 (6144 MB) [...] avail memory = 6149332992 (5864 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL PE_SC3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 3 1 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xbf6aef98-0xbf6aefb6 [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL PE_SC3> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] bge0: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5719001> mem 0xc5190000-0xc519ffff,0xc51a0000-0xc51affff,0xc51b0000-0xc51bffff irq 16 at device 0.0 on pci1 [...] bge0: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E [...] miibus0: <MII bus> on bge0 [...] brgphy0: <BCM5719C 1000BASE-T media interface> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge0: Using defaults for TSO: 65518/35/2048 [...] bge0: Ethernet address: ... [...] bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5719001> mem 0xc5160000-0xc516ffff,0xc5170000-0xc517ffff,0xc5180000-0xc518ffff irq 17 at device 0.1 on pci1 [...] bge1: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge1: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E [...] miibus1: <MII bus> on bge1 [...] brgphy1: <BCM5719C 1000BASE-T media interface> PHY 2 on miibus1 [...] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge1: Using defaults for TSO: 65518/35/2048 [...] bge1: Ethernet address: ... [...] bge2: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5719001> mem 0xc5130000-0xc513ffff,0xc5140000-0xc514ffff,0xc5150000-0xc515ffff irq 16 at device 0.2 on pci1 [...] bge2: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge2: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E [...] miibus2: <MII bus> on bge2 [...] brgphy2: <BCM5719C 1000BASE-T media interface> PHY 3 on miibus2 [...] brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge2: Using defaults for TSO: 65518/35/2048 [...] bge2: Ethernet address: ... [...] bge3: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5719001> mem 0xc5100000-0xc510ffff,0xc5110000-0xc511ffff,0xc5120000-0xc512ffff irq 17 at device 0.3 on pci1 [...] bge3: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge3: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E [...] miibus3: <MII bus> on bge3 [...] brgphy3: <BCM5719C 1000BASE-T media interface> PHY 4 on miibus3 [...] brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge3: Using defaults for TSO: 65518/35/2048 [...] bge3: Ethernet address: ... [...] ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xc5206000-0xc52063ff irq 20 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] bce0: <QLogic NetXtreme II BCM5716 1000Base-T (C0)> mem 0xc0000000-0xc1ffffff irq 16 at device 0.0 on pci2 [...] miibus4: <MII bus> on bce0 [...] brgphy4: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus4 [...] brgphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bce0: Using defaults for TSO: 65518/35/2048 [...] bce0: Ethernet address: ... [...] bce0: ASIC (0x57092008); [...] bce0: link state changed to DOWN [...] Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (7.4.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.11) [...] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] bce1: <QLogic NetXtreme II BCM5716 1000Base-T (C0)> mem 0xc2000000-0xc3ffffff irq 17 at device 0.1 on pci2 [...] miibus5: <MII bus> on bce1 [...] brgphy5: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus5 [...] brgphy5: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bce1: Using defaults for TSO: 65518/35/2048 [...] bce1: Ethernet address: ... [...] bce1: ASIC (0x57092008); [...] bce1: link state changed to DOWN [...] Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (7.4.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.11) [...] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xc5205000-0xc52053ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] vgapci0: <VGA-compatible display> mem 0xc4000000-0xc47fffff,0xc5000000-0xc5003fff,0xc4800000-0xc4ffffff irq 19 at device 3.0 on pci3 [...] vgapci0: Boot video device [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Cougar Point AHCI SATA controller> port 0x2048-0x204f,0x2054-0x2057,0x2040-0x2047,0x2050-0x2053,0x2020-0x203f mem 0xc5204000-0xc52047ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcafff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1546486881 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 840 EVO 250GB EXT0CB6Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <WDC WD5003ABYX-18WERA0 01.01S03> ATA8-ACS SATA 2.x device [...] ada1: Serial Number... [...] ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 476940MB (976773168 512 byte sectors) [...] ses0: ada1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] ses0: pass2 in 'Slot 04', SATA Slot: scbus2 target 0 [...] cd0 at ahcich4 bus 0 scbus2 target 0 lun 0 [...] cd0: <PLDS DVD-ROM DS-8D9SH JD51> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] Root mount waiting for: usbus0 usbus1 [...] uhub2: 6 ports with 6 removable, self powered [...] uhub3: 6 ports with 6 removable, self powered [...] ugen1.3: <SIGMACHIP USB Keyboard> at usbus1 [...] ukbd0 on uhub2 [...] ukbd0: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.10, addr 3> on usbus1 [...] kbd1 at ukbd0 [...] ugen0.3: <Avocent USB Composite Device-0> at usbus0 [...] ukbd1 on uhub3 [...] ukbd1: <Keyboard> on usbus0 [...] kbd2 at ukbd1 [...] Root mount waiting for: usbus0 usbus1 [...] ugen1.4: <vendor 0x0424 product 0x2514> at usbus1 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.00, addr 4> on usbus1 [...] uhub4: MTT enabled [...] uhub4: 4 ports with 4 removable, self powered [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device Avocent USB Composite Device-1 (0x0624:0x0249) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device Avocent USB Composite Device-1 (0x0624:0x0249) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device Avocent USB Composite Device-1 (0x0624:0x0249) [...] ugen0.4: <Avocent USB Composite Device-1> at usbus0 [...] umass0 on uhub3 [...] umass0: <SCSI Transparent Interface 0> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4101 [...] umass0:5:0: Attached to scbus5 [...] umass1 on uhub3 [...] umass1: <SCSI Transparent Interface 1> on usbus0 [...] umass1: SCSI over Bulk-Only; quirks = 0x4101 [...] umass1:6:1: Attached to scbus6 [...] Root mount waiting for: CAM [...] cd1 at umass-sim1 bus 1 scbus6 target 0 lun 0 [...] cd1: <iDRAC Virtual CD 0323> Removable CD-ROM SCSI device [...] cd1: 40.000MB/s transfers [...] cd1: Attempt to query device size failed: NOT READY, Medium not present [...] cd1: quirks=0x10<10_BYTE_ONLY> [...] da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 [...] da0: <iDRAC LCDRIVE 0323> Removable Direct Access SCSI device [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] da0: Write Protected