[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p2 n230744-26127ca9fef GENERIC amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 1024x768 [...] CPU: 12th Gen Intel(R) Core(TM) i7-12700K (3609.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x90672 Family=0x6 Model=0x97 Stepping=2 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x239c27eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] Structured Extended Features2=0x98c027bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,TME,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc1cc410<FSRM,MD_CLEAR,PCONFIG,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x1488fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 85897248768 (81918 MB) [...] avail memory = 83222876160 (79367 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 20 CPUs [...] FreeBSD/SMP: Non-uniform topology [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 16 18 3 19 8 17 7 15 13 5 2 11 9 10 6 4 12 14 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x7163f000-0x7163f01e [...] smbios0: Version: 3.6, BCD Revision: 3.6 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 350 [...] Event timer "HPET1" frequency 19200000 Hz quality 340 [...] Event timer "HPET2" frequency 19200000 Hz quality 340 [...] Event timer "HPET3" frequency 19200000 Hz quality 340 [...] Event timer "HPET4" frequency 19200000 Hz quality 340 [...] Event timer "HPET5" frequency 19200000 Hz quality 340 [...] Event timer "HPET6" frequency 19200000 Hz quality 340 [...] Event timer "HPET7" frequency 19200000 Hz quality 340 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x6001000000-0x6001ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0x81900000-0x81903fff,0x81905000-0x81905fff,0x81904000-0x81904fff at device 0.0 on pci1 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x6002100000-0x600210ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <network> at device 20.3 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0x81a00000-0x81a01fff,0x81a03000-0x81a030ff,0x81a02000-0x81a027ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahcich6: <AHCI channel> at channel 6 on ahci0 [...] ahcich7: <AHCI channel> at channel 7 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib2: <ACPI PCI-PCI bridge> at device 26.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme1: <Generic NVMe Device> mem 0x81800000-0x81803fff,0x81805000-0x81805fff,0x81804000-0x81804fff at device 0.0 on pci2 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <PCI-PCI bridge> at device 3.0 on pci4 [...] pci5: <PCI bus> on pcib5 [...] igc0: <Intel(R) Ethernet Controller I226-V> mem 0x81400000-0x814fffff,0x81500000-0x81503fff at device 0.0 on pci5 [...] igc0: EEPROM V2.13-0 eTrack 0x80000286 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 4 RX queues 4 TX queues [...] igc0: Using MSI-X interrupts with 5 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib6: <PCI-PCI bridge> at device 7.0 on pci4 [...] pci6: <PCI bus> on pcib6 [...] igc1: <Intel(R) Ethernet Controller I226-V> mem 0x81200000-0x812fffff,0x81300000-0x81303fff at device 0.0 on pci6 [...] igc1: EEPROM V2.13-0 eTrack 0x80000286 [...] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] igc1: Using 4 RX queues 4 TX queues [...] igc1: Using MSI-X interrupts with 5 vectors [...] igc1: Ethernet address: ... [...] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib7: <ACPI PCI-PCI bridge> at device 28.1 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci7 [...] pci8: <ACPI PCI bus> on pcib8 [...] pcib9: <PCI-PCI bridge> at device 1.0 on pci8 [...] pci9: <PCI bus> on pcib9 [...] pci9: <multimedia, video> at device 0.0 (no driver attached) [...] pcib10: <PCI-PCI bridge> at device 2.0 on pci8 [...] pci10: <PCI bus> on pcib10 [...] pci10: <multimedia, video> at device 0.0 (no driver attached) [...] pcib11: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] igc2: <Intel(R) Ethernet Controller I225-V> mem 0x81600000-0x816fffff,0x81700000-0x81703fff at device 0.0 on pci11 [...] igc2: EEPROM V1.73-0 eTrack 0x800001f7 [...] igc2: Using 1024 TX descriptors and 1024 RX descriptors [...] igc2: Using 4 RX queues 4 TX queues [...] igc2: Using MSI-X interrupts with 5 vectors [...] igc2: Ethernet address: ... [...] igc2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel (0x7a50) HDA Controller> mem 0x6002120000-0x6002123fff,0x6002000000-0x60020fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] hwpstate_intel8: <Intel Speed Shift> on cpu8 [...] hwpstate_intel9: <Intel Speed Shift> on cpu9 [...] hwpstate_intel10: <Intel Speed Shift> on cpu10 [...] hwpstate_intel11: <Intel Speed Shift> on cpu11 [...] hwpstate_intel12: <Intel Speed Shift> on cpu12 [...] hwpstate_intel13: <Intel Speed Shift> on cpu13 [...] hwpstate_intel14: <Intel Speed Shift> on cpu14 [...] hwpstate_intel15: <Intel Speed Shift> on cpu15 [...] hwpstate_intel16: <Intel Speed Shift> on cpu16 [...] hwpstate_intel17: <Intel Speed Shift> on cpu17 [...] hwpstate_intel18: <Intel Speed Shift> on cpu18 [...] hwpstate_intel19: <Intel Speed Shift> on cpu19 [...] Timecounter "TSC-low" frequency 1804805790 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] hdacc0: <Realtek ALC897 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC897 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC897 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC897 (Front Analog)> at nid 27 and 25 on hdaa0 [...] hdacc1: <Intel Alder Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Alder Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Alder Lake (HDMI/DP 8ch)> at nid 4 on hdaa1 [...] nda0 at nvme0 bus 0 scbus9 target 0 lun 1 [...] nda0: <SK hynix PC601 HFS256GD9TNG-L2A0A HPS1 FN01N5334106Y1G3N> [...] nda0: Serial Number... [...] nda0: nvme version 1.3 [...] nda0: 244198MB (500118192 512 byte sectors) [...] nda1 at nvme1 bus 0 scbus10 target 0 lun 1 [...] nda1: <SK hynix PC601 HFS256GD9TNG-L2A0A HPS1 FS9CN8504134Y143P> [...] nda1: Serial Number... [...] nda1: nvme version 1.3 [...] nda1: 244198MB (500118192 512 byte sectors) [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 3815447MB (7814037168 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 3815447MB (7814037168 512 byte sectors) [...] ada1: quirks=0x1<4K> [...] ses0 at ahciem0 bus 0 scbus8 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] ses0: cd0,pass2 in 'Slot 03', SATA Slot: scbus3 target 0 [...] cd0 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] cd0: <PLDS DVD-RW DH16ACSH JL3B> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] Trying to mount root from zfs:ghost/ROOT/default []... [...] uhub0: 25 ports with 25 removable, self powered [...] Cuse v0.1.37 @ /dev/cuse [...] ugen0.2: <MSI MYSTIC LIGHT> at usbus0 [...] usbhid0 on uhub0 [...] usbhid0: <MSI MYSTIC LIGHT, class 0/0, rev 1.10/0.01, addr 1> on usbus0 [...] hidbus0: <HID bus> on usbhid0 [...] [drm] Got Intel graphics stolen memory base 0x78800000, size 0x8000000 [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] adls_dmc_ver2_01.bin: could not load binary firmware /boot/firmware/adls_dmc_ver2_01.bin either [...] i915/adls_dmc_ver2_01.bin: could not load binary firmware /boot/firmware/i915/adls_dmc_ver2_01.bin either [...] i915_adls_dmc_ver2_01.bin: could not load binary firmware /boot/firmware/i915_adls_dmc_ver2_01.bin either [...] drmn0: successfully loaded firmware image 'i915/adls_dmc_ver2_01.bin' [...] drmn0: [drm] Finished loading DMC firmware i915/adls_dmc_ver2_01.bin (v2.1) [...] lkpi_iic0: <LinuxKPI I2C> on drmn0 [...] iicbus0: <Philips I2C bus> on lkpi_iic0 [...] iic0: <I2C generic I/O> on iicbus0 [...] lkpi_iic1: <LinuxKPI I2C> on drmn0 [...] iicbus1: <Philips I2C bus> on lkpi_iic1 [...] iic1: <I2C generic I/O> on iicbus1 [...] lkpi_iic2: <LinuxKPI I2C> on drmn0 [...] iicbus2: <Philips I2C bus> on lkpi_iic2 [...] iic2: <I2C generic I/O> on iicbus2 [...] lkpi_iic3: <LinuxKPI I2C> on drmn0 [...] iicbus3: <Philips I2C bus> on lkpi_iic3 [...] iic3: <I2C generic I/O> on iicbus3 [...] lkpi_iic4: <LinuxKPI I2C> on drmn0 [...] iicbus4: <Philips I2C bus> on lkpi_iic4 [...] iic4: <I2C generic I/O> on iicbus4 [...] lkpi_iic5: <LinuxKPI I2C> on drmn0 [...] iicbus5: <Philips I2C bus> on lkpi_iic5 [...] iic5: <I2C generic I/O> on iicbus5 [...] lkpi_iic6: <LinuxKPI I2C> on drmn0 [...] iicbus6: <Philips I2C bus> on lkpi_iic6 [...] iic6: <I2C generic I/O> on iicbus6 [...] lkpi_iic7: <LinuxKPI I2C> on drmn0 [...] iicbus7: <Philips I2C bus> on lkpi_iic7 [...] iic7: <I2C generic I/O> on iicbus7 [...] lkpi_iic8: <LinuxKPI I2C> on drmn0 [...] iicbus8: <Philips I2C bus> on lkpi_iic8 [...] iic8: <I2C generic I/O> on iicbus8 [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] lkpi_iic9: <LinuxKPI I2C> on drm3 [...] iicbus9: <Philips I2C bus> on lkpi_iic9 [...] iic9: <I2C generic I/O> on iicbus9 [...] lkpi_iic10: <LinuxKPI I2C> on drm5 [...] iicbus10: <Philips I2C bus> on lkpi_iic10 [...] iic10: <I2C generic I/O> on iicbus10 [...] [drm] Initialized i915 1.6.0 20201103 for drmn0 on minor 0 [...] VT: Replacing driver "efifb" with new "drmfb". [...] start FB_INFO: [...] height=2160 width=3840 depth=32 [...] pbase=0x4000340000 vbase=0xfffffe0215940000 [...] name=drmn0 id=i915drmfb flags=0x0 stride=15360 [...] end FB_INFO [...] Intel(R) Wireless WiFi based driver for FreeBSD [...] iwlwifi0: <iwlwifi> mem 0x6002124000-0x6002127fff at device 20.3 on pci0 [...] iwlwifi0: Detected crf-id 0x400410, cnv-id 0x80401 wfpm id 0x80000020 [...] iwlwifi0: PCI dev 7a70/0094, rev=0x430, rfid=0x2010d000 [...] iwlwifi0: successfully loaded firmware image 'iwlwifi-so-a0-gf-a0-83.ucode' [...] iwlwifi0: api flags index 2 larger than supported by driver [...] iwlwifi0: TLV_FW_FSEQ_VERSION: FSEQ Version: XXX.XXX.XXX.XXX [...] iwl-debug-yoyo.bin: could not load binary firmware /boot/firmware/iwl-debug-yoyo.bin either [...] iwl-debug-yoyo.bin: could not load binary firmware /boot/firmware/iwl-debug-yoyo.bin either [...] iwl-debug-yoyo_bin: could not load binary firmware /boot/firmware/iwl-debug-yoyo_bin either [...] iwl_debug_yoyo_bin: could not load binary firmware /boot/firmware/iwl_debug_yoyo_bin either [...] iwlwifi0: loaded firmware version 83.e8f84e98.0 so-a0-gf-a0-83.ucode op_mode iwlmvm [...] iwlwifi0: Detected Intel(R) Wi-Fi 6E AX211 160MHz, REV=0x430 [...] iwlwifi0: WRT: Invalid buffer destination: 0 [...] iwlwifi0: WFPM_UMAC_PD_NOTIFICATION: 0x20 [...] iwlwifi0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [...] iwlwifi0: WFPM_AUTH_KEY_0: 0x90 [...] iwlwifi0: CNVI_SCU_SEQ_DATA_DW9: 0x0 [...] iwlwifi0: RFIm is deactivated, reason = 5 [...] iwlwifi0: successfully loaded firmware image 'iwlwifi-so-a0-gf-a0.pnvm' [...] iwlwifi0: loaded PNVM version 181407b3 [...] iwlwifi0: Detected RF GF, rfid=0x2010d000 [...] ugen0.3: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/60.70, addr 2> on usbus0 [...] iwlwifi0: base HW address: XXX [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: cannot find EC device [...] acpi_wmi2: Embedded MOF found [...] ACPI: \134_SB.WMIC.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi3: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi3: cannot find EC device [...] acpi_wmi4: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi4: cannot find EC device [...] iwlwifi0: WRT: Invalid buffer destination: 0 [...] iwlwifi0: WFPM_UMAC_PD_NOTIFICATION: 0x20 [...] iwlwifi0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [...] iwlwifi0: WFPM_AUTH_KEY_0: 0x90 [...] iwlwifi0: CNVI_SCU_SEQ_DATA_DW9: 0x0 [...] iwlwifi0: RFIm is deactivated, reason = 5 [...] uhub1: 4 ports with 4 removable, self powered [...] wlan0: Ethernet address: ... [...] igc0: link state changed to UP [...] igc1: link state changed to UP [...] igc2: link state changed to UP [...] lo0: link state changed to UP [...] igc0: link state changed to DOWN [...] igc1: link state changed to DOWN [...] igc2: link state changed to DOWN [...] ugen0.4: <GenesysLogic USB2.1 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <GenesysLogic USB2.1 Hub, class 9/0, rev 2.10/94.05, addr 3> on usbus0 [...] uhub2: MTT enabled [...] uhub2: 4 ports with 4 removable, self powered [...] ugen0.5: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub3 on uhub2 [...] uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/85.38, addr 4> on usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] ugen0.6: <vendor 0x1ea7 2.4G Mouse> at usbus0 [...] usbhid1 on uhub3 [...] usbhid1: <vendor 0x1ea7 2.4G Mouse, class 0/0, rev 1.10/2.00, addr 5> on usbus0 [...] hidbus1: <HID bus> on usbhid1 [...] hkbd0: <vendor 0x1ea7 2.4G Mouse Keyboard> on hidbus1 [...] kbd2 at hkbd0 [...] usbhid2 on uhub3 [...] usbhid2: <vendor 0x1ea7 2.4G Mouse, class 0/0, rev 1.10/2.00, addr 5> on usbus0 [...] hidbus2: <HID bus> on usbhid2 [...] ugen0.7: <Lenovo Lenovo 500 Wireless Combo Keyboard Mouse> at usbus0 [...] usbhid3 on uhub3 [...] usbhid3: <Lenovo Lenovo 500 Wireless Combo Keyboard Mouse, class 0/0, rev 1.10/1.02, addr 6> on usbus0 [...] hidbus3: <HID bus> on usbhid3 [...] hkbd1: <Lenovo Lenovo 500 Wireless Combo Keyboard Mouse> on hidbus3 [...] kbd3 at hkbd1 [...] usbhid4 on uhub3 [...] usbhid4: <Lenovo Lenovo 500 Wireless Combo Keyboard Mouse, class 0/0, rev 1.10/1.02, addr 6> on usbus0 [...] hidbus4: <HID bus> on usbhid4 [...] ugen0.8: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/60.70, addr 7> on usbus0 [...] igc0: link state changed to UP [...] igc2: link state changed to UP [...] igc1: link state changed to UP [...] uhub4: 4 ports with 4 removable, self powered [...] hms0: <vendor 0x1ea7 2.4G Mouse> on hidbus2 [...] hms0: 8 buttons and [XYWH] coordinates ID=2 [...] hms1: <Lenovo Lenovo 500 Wireless Combo Keyboard Mouse> on hidbus4 [...] hms1: 5 buttons and [XYWH] coordinates ID=1 [...] hcons0: <vendor 0x1ea7 2.4G Mouse Consumer Control> on hidbus2 [...] hcons1: <Lenovo Lenovo 500 Wireless Combo Keyboard Mouse Consumer Control> on hidbus4 [...] hsctrl0: <vendor 0x1ea7 2.4G Mouse System Control> on hidbus2 [...] hsctrl1: <Lenovo Lenovo 500 Wireless Combo Keyboard Mouse System Control> on hidbus4 [...] ugen0.9: <vendor 0x8087 product 0x0033> at usbus0 [...] ugen0.10: <GenesysLogic USB3.2 Hub> at usbus0 [...] uhub5 on uhub0 [...] uhub5: <GenesysLogic USB3.2 Hub, class 9/0, rev 3.20/94.05, addr 9> on usbus0 [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled