[...] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [...] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [...] 2018, 2019, 2020, 2021, 2022 [...] The NetBSD Foundation, Inc. All rights reserved. [...] Copyright (c) 1982, 1986, 1989, 1991, 1993 [...] The Regents of the University of California. All rights reserved. [...] [...] NetBSD 10.99.1 (GENERIC) #0: Tue Dec 20 23:08:51 UTC 2022 [...] XXX@XXX:/usr/src/sys/arch/amd64/compile/GENERIC [...] total memory = 8047 MB [...] avail memory = 7756 MB [...] timecounter: Timecounters tick every 10.000 msec [...] Kernelized RAIDframe activated [...] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 [...] efi: systbl at pa d7088f18 [...] mainbus0 (root) [...] ACPI: RSDP 0x00000000D7FFE014 000024 (v02 LENOVO) [...] ACPI: XSDT 0x00000000D7FD0188 0000DC (v01 LENOVO TP-N1C 00000000 PTEC 00000002) [...] ACPI: FACP 0x00000000D7FF4000 0000F4 (v05 LENOVO TP-N1C 00001570 PTEC 00000002) [...] ACPI: DSDT 0x00000000D7FDD000 0125E3 (v02 LENOVO TP-N1C 00001570 INTL 20141107) [...] ACPI: FACS 0x00000000D7F9B000 000040 [...] ACPI: TCPA 0x00000000D7FFC000 000032 (v02 LENOVO TP-N1C 00000002 PTEC 00000002) [...] ACPI: SSDT 0x00000000D7FFB000 0003A2 (v02 LENOVO TcgTable 00001000 INTL 20141107) [...] ACPI: UEFI 0x00000000D7FB1000 000042 (v01 LENOVO TP-N1C 00001570 PTEC 00000002) [...] ACPI: SSDT 0x00000000D7FF6000 004E34 (v02 LENOVO SaSsdt 00003000 INTL 20141107) [...] ACPI: SSDT 0x00000000D7FF5000 0005C5 (v02 LENOVO PerfTune 00001000 INTL 20141107) [...] ACPI: ECDT 0x00000000D7FF3000 000052 (v01 LENOVO TP-N1C 00001570 PTEC 00000002) [...] ACPI: HPET 0x00000000D7FF2000 000038 (v01 LENOVO TP-N1C 00001570 PTEC 00000002) [...] ACPI: APIC 0x00000000D7FF1000 0000BC (v03 LENOVO TP-N1C 00001570 PTEC 00000002) [...] ACPI: MCFG 0x00000000D7FF0000 00003C (v01 LENOVO TP-N1C 00001570 PTEC 00000002) [...] ACPI: SSDT 0x00000000D7FDB000 0018D2 (v01 LENOVO SataAhci 00001000 INTL 20141107) [...] ACPI: DBGP 0x00000000D7FDA000 000034 (v01 LENOVO TP-N1C 00001570 PTEC 00000002) [...] ACPI: DBG2 0x00000000D7FD9000 000054 (v00 LENOVO TP-N1C 00001570 PTEC 00000002) [...] ACPI: BOOT 0x00000000D7FD8000 000028 (v01 LENOVO TP-N1C 00001570 PTEC 00000002) [...] ACPI: BATB 0x00000000D7FD7000 00004A (v02 LENOVO TP-N1C 00001570 PTEC 00000002) [...] ACPI: SLIC 0x00000000D7FD6000 000176 (v01 LENOVO TP-N1C 00001570 PTEC 00000002) [...] ACPI: SSDT 0x00000000D7FD5000 000E73 (v02 LENOVO CpuSsdt 00003000 INTL 20141107) [...] ACPI: SSDT 0x00000000D7FD4000 000403 (v02 LENOVO CtdpB 00001000 INTL 20141107) [...] ACPI: MSDM 0x00000000D7FD3000 000055 (v03 LENOVO TP-N1C 00001570 PTEC 00000002) [...] ACPI: DMAR 0x00000000D7FD2000 0000A8 (v01 LENOVO TP-N1C 00001570 PTEC 00000002) [...] ACPI: ASF! 0x00000000D7FD1000 0000A5 (v32 LENOVO TP-N1C 00001570 PTEC 00000002) [...] ACPI: FPDT 0x00000000D7FFD000 000044 (v01 LENOVO TP-N1C 00001570 PTEC 00000002) [...] ACPI: UEFI 0x00000000D7F99000 00013E (v01 LENOVO TP-N1C 00001570 PTEC 00000002) [...] ACPI: 7 ACPI AML tables successfully acquired and loaded [...] ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 120 pins [...] x2APIC available but disabled by DMAR table [...] cpu0 at mainbus0 apid 0 [...] cpu0: Use lfence to serialize rdtsc [...] cpu0: CPU base freq 2500000000 Hz [...] cpu0: CPU max freq 3000000000 Hz [...] cpu0: TSC freq CPUID 2496000000 Hz [...] cpu0: Intel(R) Core(TM) i5-6300U CPU @ 2.40GHz, id 0x406e3 [...] cpu0: node 0, package 0, core 0, smt 0 [...] cpu1 at mainbus0 apid 2 [...] cpu1: Intel(R) Core(TM) i5-6300U CPU @ 2.40GHz, id 0x406e3 [...] cpu1: node 0, package 0, core 1, smt 0 [...] cpu2 at mainbus0 apid 1 [...] cpu2: Intel(R) Core(TM) i5-6300U CPU @ 2.40GHz, id 0x406e3 [...] cpu2: node 0, package 0, core 0, smt 1 [...] cpu3 at mainbus0 apid 3 [...] cpu3: Intel(R) Core(TM) i5-6300U CPU @ 2.40GHz, id 0x406e3 [...] cpu3: node 0, package 0, core 1, smt 1 [...] acpi0 at mainbus0: Intel ACPICA 20221020 [...] acpi0: X/RSDT: OemId <LENOVO,TP-N1C ,00000000>, AslId <PTEC,00000002> [...] acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT [...] acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000 [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFEEF92EB59488 0003CF (v02 PmRef Cpu0Cst 00003001 INTL 20141107) [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFEEF81E1D1008 0006AC (v02 PmRef Cpu0Ist 00003000 INTL 20141107) [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFEEF81E1D7008 0005AA (v02 PmRef ApIst 00003000 INTL 20141107) [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFEEF81E17E4C8 000119 (v02 PmRef ApCst 00003000 INTL 20141107) [...] acpi0: SCI interrupting at int 9 [...] acpi0: fixed power button present [...] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 [...] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) [...] timecounter: Timecounter "hpet0" frequency 24000000 Hz quality 2000 [...] acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0 [...] MEM (PNP0C01) at acpi0 not configured [...] acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch [...] acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button [...] attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0 [...] pcppi1 at acpi0 (SPKR, PNP0800): io 0x61 [...] spkr0 at pcppi1: PC Speaker [...] wsbell at spkr0 not configured [...] midi0 at pcppi1: PC speaker [...] sysbeep0 at pcppi1 [...] pckbc1 at acpi0 (KBD, LEN0071) (kbd port): io 0x60,0x64 irq 1 [...] pckbc2 at acpi0 (MOU, LEN004B) (aux port): irq 12 [...] acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery [...] acpibat1 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery [...] acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter [...] thinkpad0 at acpi0 (HKEY, LEN0068) [...] thinkpad0: version 0200 [...] acpivga0 at acpi0 (GFX0): ACPI Display Adapter [...] acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device [...] acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output Device [...] acpiout2 at acpivga0 (DD03, 0x0200): ACPI Display Output Device [...] acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output Device [...] acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device [...] acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device [...] acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device [...] acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device [...] acpiout8 at acpivga0 (DD09, 0x0009): ACPI Display Output Device [...] acpiout9 at acpivga0 (DD0A, 0x000a): ACPI Display Output Device [...] acpiout10 at acpivga0 (DD0B, 0x000b): ACPI Display Output Device [...] acpiout11 at acpivga0 (DD0C, 0x000c): ACPI Display Output Device [...] acpiout12 at acpivga0 (DD0D, 0x000d): ACPI Display Output Device [...] acpiout13 at acpivga0 (DD0E, 0x000e): ACPI Display Output Device [...] acpiout14 at acpivga0 (DD0F, 0x000f): ACPI Display Output Device [...] acpiout15 at acpivga0 (DD1F, 0x0400): ACPI Display Output Device [...] acpiout15: brightness levels: [0-100] [...] acpiout16 at acpivga0 (SKC0, 0xca00): ACPI Display Output Device [...] acpivga0: connected output devices: [...] acpivga0: 0x0400 (acpiout15): Unknown Output Device, head 0 [...] acpiwmi0 at acpi0 (WMI1, PNP0C14-1): ACPI WMI Interface [...] acpiwmibus at acpiwmi0 not configured [...] acpiwmi1 at acpi0 (WMI2, PNP0C14-2): ACPI WMI Interface [...] acpiwmibus at acpiwmi1 not configured [...] acpiwmi2 at acpi0 (WMI3, PNP0C14-3): ACPI WMI Interface [...] acpiwmibus at acpiwmi2 not configured [...] tpm0 at acpi0 (TPM, PNP0C31): mem 0xfed40000-0xfed44fff [...] tpm0: device 0x001b15d1 rev 0x10 [...] acpitz0 at acpi0 (THM0) [...] acpitz0: levels: critical 128.0 C, passive cooling [...] ACPI: Enabled 3 GPEs in block 00 to 7F [...] attimer1: attached to pcppi1 [...] pckbd0 at pckbc1 (kbd slot) [...] pckbc1: using irq 1 for kbd slot [...] wskbd0 at pckbd0: console keyboard [...] pms0 at pckbc1 (aux slot) [...] pms0: Synaptics touchpad version 8.2 [...] pms0: Extended W mode, Passthrough, Up/down buttons, Palm detect, One button click pad, Multi-finger Report, Multi-finger, Reports max, Reports min [...] pms0: Probed max coordinates right: 5676, top: 4762 [...] pms0: Probed min coordinates left: 1266, bottom: 1094 [...] pckbc1: using irq 12 for aux slot [...] wsmouse0 at pms0 mux 0 [...] pci0 at mainbus0 bus 0: configuration mode 1 [...] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [...] pchb0 at pci0 dev 0 function 0: Intel Core 6G Host and DRAM (U) (rev. 0x08) [...] i915drmkms0 at pci0 dev 2 function 0: Intel HD Graphics 520 (GT2) (rev. 0x07) [...] Intel Core 6G Gaussian Mixture Model (miscellaneous system) at pci0 dev 8 function 0 not configured [...] xhci0 at pci0 dev 20 function 0: Intel 100 Series xHCI (rev. 0x21) [...] xhci0: 64-bit DMA [...] xhci0: interrupting at msi0 vec 0 [...] xhci0: xHCI version 1.0 [...] usb0 at xhci0: USB revision 3.0 [...] usb1 at xhci0: USB revision 2.0 [...] Intel 100 Series Thermal (miscellaneous DASP, revision 0x21) at pci0 dev 20 function 2 not configured [...] Intel 100 Series MEI (miscellaneous communications, revision 0x21) at pci0 dev 22 function 0 not configured [...] puc0 at pci0 dev 22 function 3: Intel 100 Series LP KT (com) [...] com2 at puc0 port 0 (16550-compatible): ioaddr 0xe080, interrupting at ioapic0 pin 19 [...] com2: ns16550a, 16-byte FIFO [...] ahcisata0 at pci0 dev 23 function 0: Intel 100 Series SATA (AHCI) (rev. 0x21) [...] ahcisata0: 64-bit DMA [...] ahcisata0: AHCI revision 1.31, 1 port, 32 slots, CAP 0xc734ff00<PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SNCQ,S64A> [...] ahcisata0: interrupting at msi1 vec 0 [...] atabus0 at ahcisata0 channel 1 [...] ppb0 at pci0 dev 28 function 0: Intel 100 Series PCIe (rev. 0xf1) [...] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s [...] ppb0: link is x1 @ 2.5GT/s [...] pci1 at ppb0 bus 2 [...] pci1: i/o space, memory space enabled [...] rtsx0 at pci1 dev 0 function 0: Realtek Semiconductor RTS522A PCI-E Card Reader (rev. 0x01) [...] rtsx0: interrupting at msi2 vec 0 [...] sdmmc0 at rtsx0 [...] ppb1 at pci0 dev 28 function 2: Intel 100 Series PCIe (rev. 0xf1) [...] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s [...] ppb1: link is x1 @ 2.5GT/s [...] pci2 at ppb1 bus 4 [...] pci2: i/o space, memory space enabled [...] iwm0 at pci2 dev 0 function 0: Intel Dual Band Wireless AC 8260 (rev. 0x3a) [...] iwm0: interrupting at msi3 vec 0 [...] pcib0 at pci0 dev 31 function 0: Intel 100 Series (PCH-U) LPC (rev. 0x21) [...] Intel 100 Series PMC (miscellaneous memory, revision 0x21) at pci0 dev 31 function 2 not configured [...] hdaudio0 at pci0 dev 31 function 3: HD Audio Controller [...] hdaudio0: interrupting at msi4 vec 0 [...] hdaudio0: HDA ver. 1.0, OSS 9, ISS 7, BSS 0, SDO 1, 64-bit [...] hdafg0 at hdaudio0: Realtek ALC293 [...] hdafg0: DAC00 2ch: Speaker [Built-In] [...] hdafg0: ADC01 2ch: Mic In [Jack] [...] hdafg0: ADC02 2ch: Mic In [Built-In] [...] hdafg0: DAC03 2ch: HP Out [Jack] [...] hdafg0: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3 [...] audio0 at hdafg0: playback, capture, full duplex, independent [...] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback [...] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording [...] spkr1 at audio0: PC Speaker (synthesized) [...] wsbell at spkr1 not configured [...] hdafg1 at hdaudio0: Intel HDMI/DP [...] hdafg1: DP00 8ch: Digital Out [Jack] [...] hdafg1: 8ch/0ch 48000Hz PCM16* [...] audio1 at hdafg1: playback, capture, full duplex, independent [...] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback [...] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording [...] spkr2 at audio1: PC Speaker (synthesized) [...] wsbell at spkr2 not configured [...] ichsmb0 at pci0 dev 31 function 4: Intel 100 Series SMBus (rev. 0x21) [...] ichsmb0: interrupting at ioapic0 pin 16 [...] iic0 at ichsmb0: I2C bus [...] wm0 at pci0 dev 31 function 6, 64-bit DMA: I219 LM Ethernet Connection (rev. 0x21) [...] wm0: interrupting at msi5 vec 0 [...] wm0: PCI-Express bus [...] wm0: 4096 words FLASH, version 0.13.3 [...] wm0: Ethernet address XXX [...] wm0: 0x6a4080<FLASH,PCIE,ASF_FIRM,AMT,WOL,EEE> [...] ihphy0 at wm0 phy 2: i217 10/100/1000 media interface, rev. 6 [...] ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [...] isa0 at pcib0 [...] acpicpu0 at cpu0: ACPI CPU [...] acpicpu0: C1: FFH, lat 1 us, pow 1000 mW [...] acpicpu0: C2: FFH, lat 151 us, pow 200 mW [...] acpicpu0: C3: FFH, lat 1034 us, pow 200 mW [...] acpicpu0: P0: FFH, lat 10 us, pow 15000 mW, 2401 MHz, turbo boost [...] acpicpu0: P1: FFH, lat 10 us, pow 14236 mW, 2400 MHz [...] acpicpu0: P2: FFH, lat 10 us, pow 13487 mW, 2300 MHz [...] acpicpu0: P3: FFH, lat 10 us, pow 12752 mW, 2200 MHz [...] acpicpu0: P4: FFH, lat 10 us, pow 11325 mW, 2000 MHz [...] acpicpu0: P5: FFH, lat 10 us, pow 10635 mW, 1900 MHz [...] acpicpu0: P6: FFH, lat 10 us, pow 9292 mW, 1700 MHz [...] acpicpu0: P7: FFH, lat 10 us, pow 8642 mW, 1600 MHz [...] acpicpu0: P8: FFH, lat 10 us, pow 7382 mW, 1400 MHz [...] acpicpu0: P9: FFH, lat 10 us, pow 6772 mW, 1300 MHz [...] acpicpu0: P10: FFH, lat 10 us, pow 5591 mW, 1100 MHz [...] acpicpu0: P11: FFH, lat 10 us, pow 5020 mW, 1000 MHz [...] acpicpu0: P12: FFH, lat 10 us, pow 3917 mW, 800 MHz [...] acpicpu0: P13: FFH, lat 10 us, pow 3384 mW, 700 MHz [...] acpicpu0: P14: FFH, lat 10 us, pow 2356 mW, 500 MHz [...] acpicpu0: P15: FFH, lat 10 us, pow 1861 mW, 400 MHz [...] acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 % [...] acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 % [...] acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 % [...] acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 % [...] acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 % [...] acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 % [...] acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 % [...] acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 % [...] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100 [...] acpicpu1 at cpu1: ACPI CPU [...] coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100 [...] acpicpu2 at cpu2: ACPI CPU [...] acpicpu3 at cpu3: ACPI CPU [...] cpu0: CPU base freq 2500000000 Hz [...] cpu0: CPU max freq 3000000000 Hz [...] cpu0: TSC freq CPUID 2496000000 Hz [...] cpu0: TSC freq calibrated 2496005000 Hz [...] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [...] timecounter: Timecounter "TSC" frequency 2496005000 Hz quality 3000 [...] uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0 [...] uhub0: 6 ports with 6 removable, self powered [...] uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0 [...] uhub1: 12 ports with 12 removable, self powered [...] acpiacad0: AC adapter online. [...] acpibat0: SANYO LiP rechargeable battery [...] acpibat0: granularity: low->warn 0.001 Wh, warn->full 0.001 Wh [...] acpibat1: SANYO LION rechargeable battery [...] acpibat1: granularity: low->warn 0.001 Wh, warn->full 0.001 Wh [...] IPsec: Initialized Security Association Processing. [...] ahcisata0 port 1: device present, speed: 6.0Gb/s [...] wd0 at atabus0 drive 0 [...] wd0: <SAMSUNG MZNTY128HDHP-000L1> [...] wd0: drive supports 16-sector PIO transfers, LBA48 addressing [...] wd0: 119 GB, 248085 cyl, 16 head, 63 sec, 512 bytes/sect x 250069680 sectors [...] wd0: GPT GUID: HASH_31A-A8CF-E38B-E943-DA3CB080CC36 [...] dk0 at wd0: "netbsd-boot", 262144 blocks at 64, type: msdos [...] dk1 at wd0: "netbsd-root", 233325120 blocks at 262208, type: ffs [...] dk2 at wd0: "netbsd-swap", 16482304 blocks at 233587328, type: swap [...] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) [...] wd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) [...] uhub2 at uhub1 port 4: LENOVO (0x17ef) Lenovo ThinkPad Dock (0x1010), class 9/0, rev 2.10/50.40, addr 2 [...] uhub2: single transaction translator [...] uhub2: 4 ports with 3 removable, self powered [...] uhub3 at uhub0 port 4: LENOVO (0x17ef) Lenovo ThinkPad Dock (0x1010), class 9/0, rev 3.00/50.41, addr 1 [...] uhub3: 4 ports with 3 removable, self powered [...] uhub4 at uhub2 port 4: Lenovo (0x17ef) Lenovo ThinkPad Dock (0x100f), class 9/0, rev 2.00/0.01, addr 3 [...] uhub4: multiple transaction translators [...] uhub4: 3 ports with 3 removable, self powered [...] uhidev0 at uhub4 port 2 configuration 1 interface 0 [...] uhidev0: vendor 17ef (0x17ef) ThinkPad USB Laser Mouse (0x6044), rev 2.00/0.08, addr 4, iclass 3/1 [...] uhidev0: 1 report ids [...] ums0 at uhidev0 reportid 1: 5 buttons and Z dir [...] wsmouse1 at ums0 mux 0 [...] ubt0 at uhub1 port 7 [...] ubt0: vendor 8087 (0x8087) product 0a2b (0x0a2b), rev 2.00/0.01, addr 5 [...] uvideo0 at uhub1 port 8 configuration 1 interface 0: Chicony Electronics Co.,Ltd. (0x04f2) Integrated Camera (0xb52c), rev 2.00/0.29, addr 6 [...] video0 at uvideo0: Chicony Electronics Co.,Ltd. (0x04f2) Integrated Camera (0xb52c), rev 2.00/0.29, addr 6 [...] swwdog0: software watchdog initialized [...] boot device: wd0 [...] root on dk1 dumps on dk2 [...] /: replaying log to memory [...] root file system type: ffs [...] kern.module.path=/stand/amd64/10.99.1/modules [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] i915drmkms0: interrupting at msi6 vec 0 (i915drmkms0) [...] i915drmkms0: notice: Failed to load DMC firmware i915/skl_dmc_ver1_27.bin. Disabling runtime power management. [...] [drm] Initialized i915 1.6.0 20200114 for i915drmkms0 on minor 0 [...] iwm0: hw rev 0x200, fw ver 22.361476.0, address XXX [...] intelfb0 at i915drmkms0 [...] [drm] DRM_I915_DEBUG enabled [...] [drm] DRM_I915_DEBUG_GEM enabled [...] intelfb0: framebuffer at 0xe0040000, size 1920x1080, depth 32, stride 7680 [...] wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0 [...] wsmux1: connecting to wsdisplay0 [...] lua0: Lua 5.3.5 Copyright (C) 39B9-CAD7 Lua.org, PUC-Rio [...] nvmm0: attached, using backend x86-vmx [...] /: replaying log to disk [...] audio0: slinear_le:16 2ch 48000Hz, blk 8192 bytes (42.6ms) for playback [...] audio0: slinear_le:16 2ch 48000Hz, blk 8192 bytes (42.6ms) for recording [...] JIT compilation is postponed until after bpfjit module is loaded [...] acpibat0: normal capacity on 'charge state' [...] acpibat1: normal capacity on 'charge state' [...] wsdisplay0: screen 1 added (default, vt100 emulation) [...] wsdisplay0: screen 2 added (default, vt100 emulation) [...] wsdisplay0: screen 3 added (default, vt100 emulation) [...] wsdisplay0: screen 4 added (default, vt100 emulation)