[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p2 stable/25.1-n269670-fd3d1a7d1e1 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 800x600 [...] CPU microcode: updated from 0x7c to 0xf6 [...] CPU: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz (2900.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x806e9 Family=0x6 Model=0x8e Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xa000c04<RSBA> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16507432960 (15742 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 3 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x8ce25000-0x8ce2501e [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point-LP USB 3.0 controller> mem 0xdf610000-0xdf61ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Sunrise Point-LP AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdf628000-0xdf629fff,0xdf62d000-0xdf62d0ff,0xdf62c000-0xdf62c7ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 3 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0xdf500000-0xdf51ffff,0xdf520000-0xdf523fff irq 16 at device 0.0 on pci1 [...] igb0: NVM V0.6 imgtype1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb1: <Intel(R) I211 (Copper)> port 0xd000-0xd01f mem 0xdf400000-0xdf41ffff,0xdf420000-0xdf423fff irq 17 at device 0.0 on pci2 [...] igb1: NVM V0.6 imgtype1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb2: <Intel(R) I211 (Copper)> port 0xc000-0xc01f mem 0xdf300000-0xdf31ffff,0xdf320000-0xdf323fff irq 18 at device 0.0 on pci3 [...] igb2: NVM V0.6 imgtype1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb3: <Intel(R) I211 (Copper)> port 0xb000-0xb01f mem 0xdf200000-0xdf21ffff,0xdf220000-0xdf223fff irq 19 at device 0.0 on pci4 [...] igb3: NVM V0.6 imgtype1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igb4: <Intel(R) I211 (Copper)> port 0xa000-0xa01f mem 0xdf100000-0xdf11ffff,0xdf120000-0xdf123fff irq 16 at device 0.0 on pci5 [...] igb4: NVM V0.6 imgtype1 [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 2 RX queues 2 TX queues [...] igb4: Using MSI-X interrupts with 3 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] igb5: <Intel(R) I211 (Copper)> port 0x9000-0x901f mem 0xdf000000-0xdf01ffff,0xdf020000-0xdf023fff irq 17 at device 0.0 on pci6 [...] igb5: NVM V0.6 imgtype1 [...] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] igb5: Using 2 RX queues 2 TX queues [...] igb5: Using MSI-X interrupts with 3 vectors [...] igb5: Ethernet address: ... [...] igb5: netmap queues/slots: TX 2/1024, RX 2/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel Kaby Lake-LP HDA Controller> mem 0xdf620000-0xdf623fff,0xdf600000-0xdf60ffff irq 16 at device 31.3 on pci0 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16950 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC-low" frequency 1452000507 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa0: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 840 EVO 250GB EXT0DB6Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] uhub0: 18 ports with 18 removable, self powered [...] igb0: link state changed to UP [...] igb5: link state changed to UP [...] pchtherm0: <Skylake PCH Thermal Subsystem> mem 0xdf631000-0xdf631fff irq 18 at device 20.2 on pci0 [...] ig4iic0: <Intel Sunrise Point-LP I2C Controller-0> mem 0xdf630000-0xdf630fff irq 16 at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] ig4iic1: <Intel Sunrise Point-LP I2C Controller-1> mem 0xdf62f000-0xdf62ffff irq 17 at device 21.1 on pci0 [...] ig4iic1: Using MSI [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] ichsmb0: <Intel Sunrise Point-LP SMBus controller> port 0xf040-0xf05f mem 0xdf62a000-0xdf62a0ff irq 16 at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] lo0: link state changed to UP [...] qat_ocf0: <QAT engine> [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] igb0: link state changed to DOWN [...] vlan0: changing name to 'vlan0.100' [...] vlan1: changing name to 'vlan0.101' [...] vlan2: changing name to 'vlan0.102' [...] igb5: link state changed to DOWN [...] igb0: link state changed to UP [...] vlan0.102: link state changed to UP [...] vlan0.100: link state changed to UP [...] vlan0.101: link state changed to UP [...] igb5: link state changed to UP [...] CPU: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz (2904.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x806e9 Family=0x6 Model=0x8e Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xa000c04<RSBA> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] 909.899240 [ 852] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 910.380210 [ 852] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] igb0: link state changed to DOWN [...] vlan0.102: link state changed to DOWN [...] vlan0.100: link state changed to DOWN [...] vlan0.101: link state changed to DOWN [...] igb0: link state changed to UP [...] vlan0.102: link state changed to UP [...] vlan0.100: link state changed to UP [...] vlan0.101: link state changed to UP [...] 072.173046 [ 852] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 072.173080 [ 852] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 072.173105 [ 852] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 072.175243 [ 852] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] igb5: link state changed to DOWN [...] 072.849494 [ 852] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 072.849566 [ 852] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 072.849625 [ 852] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] igb5: link state changed to UP [...] igb5: link state changed to DOWN [...] igb5: link state changed to UP [...] igb5: link state changed to DOWN [...] igb5: link state changed to UP [...] igb5: link state changed to DOWN [...] igb5: link state changed to UP [...] igb0: link state changed to DOWN [...] vlan0.102: link state changed to DOWN [...] vlan0.100: link state changed to DOWN [...] vlan0.101: link state changed to DOWN [...] igb0: link state changed to UP [...] vlan0.102: link state changed to UP [...] vlan0.100: link state changed to UP [...] vlan0.101: link state changed to UP [...] igb0: link state changed to DOWN [...] vlan0.102: link state changed to DOWN [...] vlan0.100: link state changed to DOWN [...] vlan0.101: link state changed to DOWN [...] igb0: link state changed to UP [...] vlan0.102: link state changed to UP [...] vlan0.100: link state changed to UP [...] vlan0.101: link state changed to UP [...] 444.080443 [ 852] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 444.080534 [ 852] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] igb0: link state changed to DOWN [...] vlan0.102: link state changed to DOWN [...] vlan0.100: link state changed to DOWN [...] vlan0.101: link state changed to DOWN [...] igb0: link state changed to UP [...] vlan0.102: link state changed to UP [...] vlan0.100: link state changed to UP [...] vlan0.101: link state changed to UP [...] igb5: link state changed to DOWN [...] 543.827206 [1188] netmap_extra_free breaking with head 338780736 [...] igb0: link state changed to DOWN [...] vlan0.102: link state changed to DOWN [...] vlan0.100: link state changed to DOWN [...] vlan0.101: link state changed to DOWN [...] igb5: link state changed to UP [...] igb0: link state changed to UP [...] vlan0.102: link state changed to UP [...] vlan0.100: link state changed to UP [...] vlan0.101: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 7 6 5 2 2 1 0 0 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p2 stable/25.1-n269670-fd3d1a7d1e1 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 800x600 [...] CPU microcode: updated from 0x7c to 0xf6 [...] CPU: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz (2900.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x806e9 Family=0x6 Model=0x8e Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xa000c04<RSBA> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16507432960 (15742 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 2 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x8ce25000-0x8ce2501e [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point-LP USB 3.0 controller> mem 0xdf610000-0xdf61ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Sunrise Point-LP AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdf628000-0xdf629fff,0xdf62d000-0xdf62d0ff,0xdf62c000-0xdf62c7ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 3 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0xdf500000-0xdf51ffff,0xdf520000-0xdf523fff irq 16 at device 0.0 on pci1 [...] igb0: NVM V0.6 imgtype1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb1: <Intel(R) I211 (Copper)> port 0xd000-0xd01f mem 0xdf400000-0xdf41ffff,0xdf420000-0xdf423fff irq 17 at device 0.0 on pci2 [...] igb1: NVM V0.6 imgtype1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb2: <Intel(R) I211 (Copper)> port 0xc000-0xc01f mem 0xdf300000-0xdf31ffff,0xdf320000-0xdf323fff irq 18 at device 0.0 on pci3 [...] igb2: NVM V0.6 imgtype1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb3: <Intel(R) I211 (Copper)> port 0xb000-0xb01f mem 0xdf200000-0xdf21ffff,0xdf220000-0xdf223fff irq 19 at device 0.0 on pci4 [...] igb3: NVM V0.6 imgtype1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igb4: <Intel(R) I211 (Copper)> port 0xa000-0xa01f mem 0xdf100000-0xdf11ffff,0xdf120000-0xdf123fff irq 16 at device 0.0 on pci5 [...] igb4: NVM V0.6 imgtype1 [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 2 RX queues 2 TX queues [...] igb4: Using MSI-X interrupts with 3 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] igb5: <Intel(R) I211 (Copper)> port 0x9000-0x901f mem 0xdf000000-0xdf01ffff,0xdf020000-0xdf023fff irq 17 at device 0.0 on pci6 [...] igb5: NVM V0.6 imgtype1 [...] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] igb5: Using 2 RX queues 2 TX queues [...] igb5: Using MSI-X interrupts with 3 vectors [...] igb5: Ethernet address: ... [...] igb5: netmap queues/slots: TX 2/1024, RX 2/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel Kaby Lake-LP HDA Controller> mem 0xdf620000-0xdf623fff,0xdf600000-0xdf60ffff irq 16 at device 31.3 on pci0 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16950 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC-low" frequency 1452000407 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa0: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 840 EVO 250GB EXT0DB6Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] uhub0: 18 ports with 18 removable, self powered [...] igb0: link state changed to UP [...] igb5: link state changed to UP [...] pchtherm0: <Skylake PCH Thermal Subsystem> mem 0xdf631000-0xdf631fff irq 18 at device 20.2 on pci0 [...] ig4iic0: <Intel Sunrise Point-LP I2C Controller-0> mem 0xdf630000-0xdf630fff irq 16 at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] ig4iic1: <Intel Sunrise Point-LP I2C Controller-1> mem 0xdf62f000-0xdf62ffff irq 17 at device 21.1 on pci0 [...] ig4iic1: Using MSI [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] ichsmb0: <Intel Sunrise Point-LP SMBus controller> port 0xf040-0xf05f mem 0xdf62a000-0xdf62a0ff irq 16 at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] lo0: link state changed to UP [...] qat_ocf0: <QAT engine> [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] igb0: link state changed to DOWN [...] vlan0: changing name to 'vlan0.100' [...] vlan1: changing name to 'vlan0.101' [...] vlan2: changing name to 'vlan0.102' [...] igb5: link state changed to DOWN [...] igb0: link state changed to UP [...] vlan0.102: link state changed to UP [...] vlan0.100: link state changed to UP [...] vlan0.101: link state changed to UP [...] igb5: link state changed to UP [...] CPU: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz (2904.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x806e9 Family=0x6 Model=0x8e Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xa000c04<RSBA> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] 697.116820 [ 852] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 697.586146 [ 852] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] igb0: link state changed to DOWN [...] vlan0.102: link state changed to DOWN [...] vlan0.100: link state changed to DOWN [...] vlan0.101: link state changed to DOWN [...] igb0: link state changed to UP [...] vlan0.102: link state changed to UP [...] vlan0.100: link state changed to UP [...] vlan0.101: link state changed to UP [...] 864.969416 [ 852] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 864.969449 [ 852] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 864.969474 [ 852] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 864.971183 [ 852] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] igb5: link state changed to DOWN [...] 865.576595 [ 852] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 865.576639 [ 852] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 865.576678 [ 852] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] igb5: link state changed to UP [...] igb5: link state changed to DOWN [...] igb0: link state changed to DOWN [...] vlan0.102: link state changed to DOWN [...] vlan0.100: link state changed to DOWN [...] vlan0.101: link state changed to DOWN [...] igb5: link state changed to UP [...] igb0: link state changed to UP [...] vlan0.102: link state changed to UP [...] vlan0.100: link state changed to UP [...] vlan0.101: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 10 10 0 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p2 stable/25.1-n269701-7c59d89f8cd SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 800x600 [...] CPU microcode: updated from 0x7c to 0xf6 [...] CPU: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz (2900.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x806e9 Family=0x6 Model=0x8e Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xa000c04<RSBA> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16507437056 (15742 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 3 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x8ce25000-0x8ce2501e [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point-LP USB 3.0 controller> mem 0xdf610000-0xdf61ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Sunrise Point-LP AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdf628000-0xdf629fff,0xdf62d000-0xdf62d0ff,0xdf62c000-0xdf62c7ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 3 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0xdf500000-0xdf51ffff,0xdf520000-0xdf523fff irq 16 at device 0.0 on pci1 [...] igb0: NVM V0.6 imgtype1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb1: <Intel(R) I211 (Copper)> port 0xd000-0xd01f mem 0xdf400000-0xdf41ffff,0xdf420000-0xdf423fff irq 17 at device 0.0 on pci2 [...] igb1: NVM V0.6 imgtype1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb2: <Intel(R) I211 (Copper)> port 0xc000-0xc01f mem 0xdf300000-0xdf31ffff,0xdf320000-0xdf323fff irq 18 at device 0.0 on pci3 [...] igb2: NVM V0.6 imgtype1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb3: <Intel(R) I211 (Copper)> port 0xb000-0xb01f mem 0xdf200000-0xdf21ffff,0xdf220000-0xdf223fff irq 19 at device 0.0 on pci4 [...] igb3: NVM V0.6 imgtype1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igb4: <Intel(R) I211 (Copper)> port 0xa000-0xa01f mem 0xdf100000-0xdf11ffff,0xdf120000-0xdf123fff irq 16 at device 0.0 on pci5 [...] igb4: NVM V0.6 imgtype1 [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 2 RX queues 2 TX queues [...] igb4: Using MSI-X interrupts with 3 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] igb5: <Intel(R) I211 (Copper)> port 0x9000-0x901f mem 0xdf000000-0xdf01ffff,0xdf020000-0xdf023fff irq 17 at device 0.0 on pci6 [...] igb5: NVM V0.6 imgtype1 [...] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] igb5: Using 2 RX queues 2 TX queues [...] igb5: Using MSI-X interrupts with 3 vectors [...] igb5: Ethernet address: ... [...] igb5: netmap queues/slots: TX 2/1024, RX 2/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel Kaby Lake-LP HDA Controller> mem 0xdf620000-0xdf623fff,0xdf600000-0xdf60ffff irq 16 at device 31.3 on pci0 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16950 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC-low" frequency 1452000301 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa0: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 840 EVO 250GB EXT0DB6Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] uhub0: 18 ports with 18 removable, self powered