[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE releng/13.1-n250148-fc952ac2212 GENERIC amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vbefb): resolution 800x600 [...] CPU: Intel(R) Core(TM)2 Quad CPU Q6700 @ 2.66GHz (2660.06-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x6fb Family=0x6 Model=0xf Stepping=11 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] VT-x: HLT,PAUSE [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8136671232 (7759 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <DELL B9K > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20201113/tbfadt-748) [...] Firmware Warning (ACPI): Incorrect checksum in table [TCPA] - 0x00, should be 0x87 (20201113/tbprint-337) [...] ioapic0: MADT APIC ID 8 != hw id 0 [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 2 3 1 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] smbios0: <System Management BIOS> at iomem 0xf0430-0xf044e [...] smbios0: Version: 2.5, BCD Revision: 2.5 [...] aesni0: No AES or SHA support. [...] acpi0: <DELL B9K > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: ec00001 vs ec00000 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xdc00-0xdcff mem 0xd0000000-0xdfffffff,0xfe9e0000-0xfe9fffff irq 16 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <ATI RV910 HDA Controller> mem 0xfe9dc000-0xfe9dffff irq 17 at device 0.1 on pci1 [...] pci0: <simple comms> at device 3.0 (no driver attached) [...] atapci0: <Intel ATA controller> port 0xfe80-0xfe87,0xfe90-0xfe93,0xfea0-0xfea7,0xfeb0-0xfeb3,0xfef0-0xfeff irq 18 at device 3.2 on pci0 [...] ata2: <ATA channel> at channel 0 on atapci0 [...] ata3: <ATA channel> at channel 1 on atapci0 [...] pci0: <simple comms, UART> at device 3.3 (no driver attached) [...] em0: <Intel(R) 82566DM-2 ICH9 AMT> port 0xecc0-0xecdf mem 0xfebe0000-0xfebfffff,0xfebdb000-0xfebdbfff irq 21 at device 25.0 on pci0 [...] em0: EEPROM V1.4-0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] uhci0: <Intel 82801I (ICH9) USB controller> port 0xff20-0xff3f irq 16 at device 26.0 on pci0 [...] uhci0: LegSup = 0x2f00 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801I (ICH9) USB controller> port 0xff00-0xff1f irq 17 at device 26.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfebd9c00-0xfebd9fff irq 22 at device 26.7 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci0 [...] usbus2: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel 82801I HDA Controller> mem 0xfebdc000-0xfebdffff irq 16 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] uhci2: <Intel 82801I (ICH9) USB controller> port 0xff80-0xff9f irq 23 at device 29.0 on pci0 [...] usbus3 on uhci2 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] uhci3: <Intel 82801I (ICH9) USB controller> port 0xff60-0xff7f irq 17 at device 29.1 on pci0 [...] usbus4 on uhci3 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] uhci4: <Intel 82801I (ICH9) USB controller> port 0xff40-0xff5f irq 18 at device 29.2 on pci0 [...] usbus5 on uhci4 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xff980800-0xff980bff irq 23 at device 29.7 on pci0 [...] usbus6: EHCI version 1.0 [...] usbus6 on ehci1 [...] usbus6: 480Mbps High Speed USB v2.0 [...] pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib3 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel ICH9 AHCI SATA controller> port 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfec0-0xfedf mem 0xff970000-0xff9707ff irq 18 at device 31.2 on pci0 [...] ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 on acpi0 [...] ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode [...] ppc0: FIFO with 16/16/8 bytes threshold [...] ppbus0: <Parallel port bus> on ppc0 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd1fff,0xd2000-0xd47ff,0xd4800-0xd7fff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr a260a2606000a26 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr a260a2606000a26 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr a260a2606000a26 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr a260a2606000a26 [...] device_attach: est3 attach returned 6 [...] Timecounter "TSC-low" frequency 1329999901 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen3.1: <Intel UHCI root HUB> at usbus3 [...] uhub0 on usbus3 [...] uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] ugen6.1: <Intel EHCI root HUB> at usbus6 [...] uhub1 on usbus6 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 [...] ugen4.1: <Intel UHCI root HUB> at usbus4 [...] uhub2 on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ugen5.1: <Intel UHCI root HUB> at usbus5 [...] uhub3 on usbus4 [...] uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] uhub4 on usbus5 [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] hdacc1: <Analog Devices AD1984 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Analog Devices AD1984 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Analog Devices AD1984 (Analog)> at nid 18 and 20 on hdaa1 [...] pcm2: <Analog Devices AD1984 (Analog)> at nid 17 and 21 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub5 on usbus1 [...] uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] uhub6 on usbus0 [...] uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] uhub5: 2 ports with 2 removable, self powered [...] uhub4: 2 ports with 2 removable, self powered [...] uhub6: 2 ports with 2 removable, self powered [...] Root mount waiting for: CAM usbus2 usbus6 [...] ada0 at ahcich0 bus 0 scbus2 target 0 lun 0 [...] ada0: <PNY CS900 1TB SSD CS900615> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 953869MB (1953525168 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus5 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus2 target 0 [...] ses0: pass1,cd0 in 'Slot 01', SATA Slot: scbus3 target 0 [...] cd0 at ahcich1 bus 0 scbus3 target 0 lun 0 [...] cd0: <TSSTcorp DVD-ROM TS-L333A D600> Removable CD-ROM SCSI device [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA2, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] GEOM_LABEL[1]: MSDOSFS: ada0: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada0 is diskid/XXXXXXXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: Label for provider ada0p1 is gpt/efiboot0. [...] GEOM_LABEL[1]: Label for provider ada0p1 is gptid/HASH_35A-720C-4613-94D1-139DFAA88141. [...] GEOM_LABEL[1]: MSDOSFS: ada0p1: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: MSDOSFS: ada0p1: FAT12/16 volume has no name. [...] GEOM_LABEL[1]: Label for provider ada0p2 is gpt/gptboot0. [...] GEOM_LABEL[1]: Label for provider ada0p2 is gptid/HASH_65B-66C4-B153-461C-72315D9AC039. [...] GEOM_LABEL[1]: MSDOSFS: ada0p2: no FAT signature found. [...] GEOM_LABEL[1]: Label for provider ada0p3 is gpt/swap0. [...] GEOM_LABEL[1]: Label for provider ada0p3 is gptid/HASH_50D-379D-5652-B2C7-BAFD119620A7. [...] GEOM_LABEL[1]: MSDOSFS: ada0p3: no FAT signature found. [...] GEOM_LABEL[1]: Label for provider ada0p4 is gpt/zfs0. [...] GEOM_LABEL[1]: Label for provider ada0p4 is gptid/HASH_D64-1010-A54C-DF2B-BBD797DAFDCE. [...] GEOM_LABEL[1]: MSDOSFS: ada0p4: no FAT signature found. [...] GEOM_LABEL[1]: Label efiboot0(gpt/efiboot0) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_35A-720C-4613-94D1-139DFAA88141(gptid/HASH_35A-720C-4613-94D1-139DFAA88141) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXX FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXX FAT12/16 volume has no name. [...] GEOM_LABEL[1]: Label gptboot0(gpt/gptboot0) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_65B-66C4-B153-461C-72315D9AC039(gptid/HASH_65B-66C4-B153-461C-72315D9AC039) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: Label swap0(gpt/swap0) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_50D-379D-5652-B2C7-BAFD119620A7(gptid/HASH_50D-379D-5652-B2C7-BAFD119620A7) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: Label zfs0(gpt/zfs0) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_D64-1010-A54C-DF2B-BBD797DAFDCE(gptid/HASH_D64-1010-A54C-DF2B-BBD797DAFDCE) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] uhub1: 6 ports with 6 removable, self powered [...] uhub2: 6 ports with 6 removable, self powered [...] Root mount waiting for: usbus2 [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXXXXXXXXXXXXXX removed. [...] GEOM_LABEL[1]: Label gptid/HASH_D64-1010-A54C-DF2B-BBD797DAFDCE removed. [...] GEOM_LABEL[1]: Label gpt/zfs0 removed. [...] GEOM_LABEL[1]: Label gptid/HASH_50D-379D-5652-B2C7-BAFD119620A7 removed. [...] GEOM_LABEL[1]: Label gpt/swap0 removed. [...] Cuse v0.1.36 @ /dev/cuse [...] ugen1.2: <Logitech USB Receiver> at usbus1 [...] ukbd0 on uhub5 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 2> on usbus1 [...] kbd2 at ukbd0 [...] ichsmb0: <Intel 82801I (ICH9) SMBus controller> port 0xece0-0xecff mem 0xfebd9b00-0xfebd9bff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] em0: link state changed to UP [...] ums0 on uhub5 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 2> on usbus1 [...] ums0: 16 buttons and [XYZT] coordinates ID=2 [...] uhid0 on uhub5 [...] uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 2> on usbus1 [...] ichwd0: <Intel ICH9DO watchdog timer> on isa0 [...] ichwd0: ICH WDT present but disabled in BIOS or hardware [...] device_attach: ichwd0 attach returned 6