[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p11 stable/24.1-n255023-99a14409566 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Celeron(R) CPU N3160 @ 1.60GHz (1600.17-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x406c4 Family=0x6 Model=0x4c Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] Structured Extended Features3=0xc000400<MD_CLEAR,IBPB,STIBP> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8147529728 (7770 MB) [...] CPU microcode: no matching update found [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <_ _> [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20201113/tbfadt-748) [...] ioapic0 <Version 2.0> irqs 0-114 [...] Launching APs: 3 2 1 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf05b0-0xf05ce [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <_> [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0x80000000-0x80ffffff,0x90000000-0x9fffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] ahci0: <AHCI SATA controller> port 0xf060-0xf07f mem 0x81615000-0x816157ff irq 19 at device 19.0 on pci0 [...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] xhci0: <Intel Braswell USB 3.0 controller> mem 0x81600000-0x8160ffff irq 20 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [...] hdac0: <Intel Braswell HDA Controller> mem 0x81610000-0x81613fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0x81500000-0x8151ffff,0x81520000-0x81523fff irq 16 at device 0.0 on pci1 [...] igb0: NVM V0.6 imgtype1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb1: <Intel(R) I211 (Copper)> port 0xd000-0xd01f mem 0x81400000-0x8141ffff,0x81420000-0x81423fff irq 17 at device 0.0 on pci2 [...] igb1: NVM V0.6 imgtype1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb2: <Intel(R) I211 (Copper)> port 0xc000-0xc01f mem 0x81300000-0x8131ffff,0x81320000-0x81323fff irq 18 at device 0.0 on pci3 [...] igb2: NVM V0.6 imgtype1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb3: <Intel(R) I211 (Copper)> port 0xb000-0xb01f mem 0x81200000-0x8121ffff,0x81220000-0x81223fff irq 19 at device 0.0 on pci4 [...] igb3: NVM V0.6 imgtype1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] sdhci_acpi0: <Intel Bay Trail/Braswell eMMC 4.5/4.5.1 Controller> iomem 0x81617000-0x81617fff irq 45 on acpi0 [...] mmc0: <MMC/SD bus> on sdhci_acpi0 [...] uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1599947908 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Braswell HDA CODEC> at cad 2 on hdac0 [...] hdaa0: <Intel Braswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Braswell (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] mmcsd0: 31GB <MMCHC BJTD4R 0.3 SN ... MFG 02/2020 by 21 0x0000> at mmc0 200.0MHz/8bit/8192-block [...] mmcsd0boot0: 4MB partition 1 at mmcsd0 [...] mmcsd0boot1: 4MB partition 2 at mmcsd0 [...] mmcsd0rpmb: 4MB partition 3 at mmcsd0 [...] Trying to mount root from ufs:/dev/mmcsd0p2 [rw]... [...] Dual Console: Video Primary, Serial Secondary [...] uhub0: 13 ports with 13 removable, self powered [...] ugen0.2: <Realtek 802.11n WLAN NIC> at usbus0 [...] ugen0.3: <Asmedia ASM107x> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <Asmedia ASM107x, class 9/0, rev 2.10/1.00, addr 2> on usbus0 [...] uhub1: MTT enabled [...] uhub1: 4 ports with 4 removable, self powered [...] usb_alloc_device: set address 4 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_IOERROR [...] ugen0.4: <JUCHEN JUCHEN4015 keybord> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <JUCHEN JUCHEN4015 keybord, class 0/0, rev 1.10/0.32, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] ukbd1 on uhub1 [...] ukbd1: <JUCHEN JUCHEN4015 keybord, class 0/0, rev 1.10/0.32, addr 3> on usbus0 [...] kbd3 at ukbd1 [...] ukbd2 on uhub1 [...] ukbd2: <JUCHEN JUCHEN4015 keybord, class 0/0, rev 1.10/0.32, addr 3> on usbus0 [...] kbd4 at ukbd2 [...] ukbd3 on uhub1 [...] ukbd3: <JUCHEN JUCHEN4015 keybord, class 0/0, rev 1.10/0.32, addr 3> on usbus0 [...] kbd5 at ukbd3 [...] ugen0.5: <Logitech G502 HERO Gaming Mouse> at usbus0 [...] ukbd4 on uhub1 [...] ukbd4: <Logitech G502 HERO Gaming Mouse, class 0/0, rev 2.00/27.03, addr 4> on usbus0 [...] kbd6 at ukbd4 [...] ugen0.4: <JUCHEN JUCHEN4015 keybord> at usbus0 (disconnected) [...] ukbd0: at uhub1, port 1, addr 3 (disconnected) [...] ukbd0: detached [...] ukbd1: at uhub1, port 1, addr 3 (disconnected) [...] ukbd1: detached [...] ukbd2: at uhub1, port 1, addr 3 (disconnected) [...] ukbd2: detached [...] ukbd3: at uhub1, port 1, addr 3 (disconnected) [...] ukbd3: detached [...] ugen0.4: <JUCHEN JUCHEN4015 keybord> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <JUCHEN JUCHEN4015 keybord, class 0/0, rev 1.10/0.32, addr 5> on usbus0 [...] kbd2 at ukbd0 [...] ukbd1 on uhub1 [...] ukbd1: <JUCHEN JUCHEN4015 keybord, class 0/0, rev 1.10/0.32, addr 5> on usbus0 [...] kbd3 at ukbd1 [...] ukbd2 on uhub1 [...] ukbd2: <JUCHEN JUCHEN4015 keybord, class 0/0, rev 1.10/0.32, addr 5> on usbus0 [...] kbd4 at ukbd2 [...] ukbd3 on uhub1 [...] ukbd3: <JUCHEN JUCHEN4015 keybord, class 0/0, rev 1.10/0.32, addr 5> on usbus0 [...] kbd5 at ukbd3 [...] igb0: link state changed to UP [...] igb3: link state changed to UP [...] ichsmb0: <Intel Braswell SMBus controller> port 0xf040-0xf05f mem 0x81614000-0x8161401f irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] rtwn0 on uhub0 [...] rtwn0: <Realtek 802.11n WLAN NIC, class 0/0, rev 2.00/0.00, addr 1> on usbus0 [...] rtwn0: MAC/BB RTL8188EU, RF 6052 1T1R [...] ums0 on uhub1 [...] ums0: <Logitech G502 HERO Gaming Mouse, class 0/0, rev 2.00/27.03, addr 4> on usbus0 [...] ums0: 16 buttons and [XYZT] coordinates ID=0 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] igb3: link state changed to DOWN [...] igb0: link state changed to DOWN [...] igb3: link state changed to UP [...] igb0: link state changed to UP [...] wlan0: Ethernet address: ... [...] wlan0: changing name to 'rtwn0_wlan1' [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] CPU: Intel(R) Celeron(R) CPU N3160 @ 1.60GHz (1599.95-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x406c4 Family=0x6 Model=0x4c Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] Structured Extended Features3=0xc000400<MD_CLEAR,IBPB,STIBP> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] ugen0.3: <Asmedia ASM107x> at usbus0 (disconnected) [...] uhub1: at uhub0, port 2, addr 2 (disconnected) [...] ugen0.4: <JUCHEN JUCHEN4015 keybord> at usbus0 (disconnected) [...] ukbd0: at uhub1, port 1, addr 5 (disconnected) [...] ukbd0: detached [...] ukbd1: at uhub1, port 1, addr 5 (disconnected) [...] ukbd1: detached [...] ukbd2: at uhub1, port 1, addr 5 (disconnected) [...] ukbd2: detached [...] ukbd3: at uhub1, port 1, addr 5 (disconnected) [...] ukbd3: detached [...] ugen0.5: <Logitech G502 HERO Gaming Mouse> at usbus0 (disconnected) [...] ums0: at uhub1, port 3, addr 4 (disconnected) [...] ums0: detached [...] ukbd4: at uhub1, port 3, addr 4 (disconnected) [...] ukbd4: detached [...] uhub1: detached [...] 490.850133 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 490.857558 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 490.865040 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] igb0: permanently promiscuous mode enabled [...] 491.122194 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] igb0: link state changed to DOWN [...] 491.772912 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 491.780337 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 491.787821 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 492.428982 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 492.436407 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 492.443885 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] igb3: permanently promiscuous mode enabled [...] 492.463995 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] igb3: link state changed to DOWN [...] 493.093409 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 493.100861 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 493.108371 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] igb0: link state changed to UP [...] igb3: link state changed to UP [...] igb0: permanently promiscuous mode disabled [...] rtwn0_wlan1: ieee80211_new_state_locked: pending SCAN -> AUTH transition lost [...] rtwn0_wlan1: link state changed to UP [...] igb3: permanently promiscuous mode disabled [...] rtwn0_wlan1: link state changed to DOWN [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] igb0: link state changed to DOWN [...] igb3: link state changed to DOWN [...] igb0: link state changed to UP [...] igb3: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 3 3 0 0 0 done [...] All buffers synced. [...] Uptime: 25m58s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p11 stable/24.1-n255023-99a14409566 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Celeron(R) CPU N3160 @ 1.60GHz (1600.14-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x406c4 Family=0x6 Model=0x4c Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] Structured Extended Features3=0xc000400<MD_CLEAR,IBPB,STIBP> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8147533824 (7770 MB) [...] CPU microcode: no matching update found [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <_ _> [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20201113/tbfadt-748) [...] ioapic0 <Version 2.0> irqs 0-114 [...] Launching APs: 2 3 1 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf05b0-0xf05ce [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <_> [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0x80000000-0x80ffffff,0x90000000-0x9fffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] ahci0: <AHCI SATA controller> port 0xf060-0xf07f mem 0x81615000-0x816157ff irq 19 at device 19.0 on pci0 [...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] xhci0: <Intel Braswell USB 3.0 controller> mem 0x81600000-0x8160ffff irq 20 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [...] hdac0: <Intel Braswell HDA Controller> mem 0x81610000-0x81613fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0x81500000-0x8151ffff,0x81520000-0x81523fff irq 16 at device 0.0 on pci1 [...] igb0: NVM V0.6 imgtype1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb1: <Intel(R) I211 (Copper)> port 0xd000-0xd01f mem 0x81400000-0x8141ffff,0x81420000-0x81423fff irq 17 at device 0.0 on pci2 [...] igb1: NVM V0.6 imgtype1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb2: <Intel(R) I211 (Copper)> port 0xc000-0xc01f mem 0x81300000-0x8131ffff,0x81320000-0x81323fff irq 18 at device 0.0 on pci3 [...] igb2: NVM V0.6 imgtype1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb3: <Intel(R) I211 (Copper)> port 0xb000-0xb01f mem 0x81200000-0x8121ffff,0x81220000-0x81223fff irq 19 at device 0.0 on pci4 [...] igb3: NVM V0.6 imgtype1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] sdhci_acpi0: <Intel Bay Trail/Braswell eMMC 4.5/4.5.1 Controller> iomem 0x81617000-0x81617fff irq 45 on acpi0 [...] mmc0: <MMC/SD bus> on sdhci_acpi0 [...] uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1599948944 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Braswell HDA CODEC> at cad 2 on hdac0 [...] hdaa0: <Intel Braswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Braswell (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] mmcsd0: 31GB <MMCHC BJTD4R 0.3 SN ... MFG 02/2020 by 21 0x0000> at mmc0 200.0MHz/8bit/8192-block [...] mmcsd0boot0: 4MB partition 1 at mmcsd0 [...] mmcsd0boot1: 4MB partition 2 at mmcsd0 [...] mmcsd0rpmb: 4MB partition 3 at mmcsd0 [...] Trying to mount root from ufs:/dev/mmcsd0p2 [rw]... [...] Dual Console: Video Primary, Serial Secondary [...] uhub0: 13 ports with 13 removable, self powered [...] ugen0.2: <Realtek 802.11n WLAN NIC> at usbus0 [...] igb0: link state changed to UP [...] igb3: link state changed to UP [...] ichsmb0: <Intel Braswell SMBus controller> port 0xf040-0xf05f mem 0x81614000-0x8161401f irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] rtwn0 on uhub0 [...] rtwn0: <Realtek 802.11n WLAN NIC, class 0/0, rev 2.00/0.00, addr 1> on usbus0 [...] rtwn0: MAC/BB RTL8188EU, RF 6052 1T1R [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] igb3: link state changed to DOWN [...] igb0: link state changed to DOWN [...] igb3: link state changed to UP [...] igb0: link state changed to UP [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] CPU: Intel(R) Celeron(R) CPU N3160 @ 1.60GHz (1599.95-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x406c4 Family=0x6 Model=0x4c Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] Structured Extended Features3=0xc000400<MD_CLEAR,IBPB,STIBP> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] wlan0: Ethernet address: ... [...] 066.138783 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 066.146250 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 066.153773 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] igb0: permanently promiscuous mode enabled [...] 066.410898 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] igb0: link state changed to DOWN [...] 067.044672 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 067.052143 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 067.059656 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 067.720726 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 067.728181 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 067.735711 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] igb3: permanently promiscuous mode enabled [...] 067.755844 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] igb3: link state changed to DOWN [...] 068.390857 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 068.398317 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] 068.405843 [ 850] iflib_netmap_config txr 2 rxr 2 txd 1024 rxd 1024 rbufsz 2048 [...] igb0: link state changed to UP [...] igb3: link state changed to UP [...] igb0: permanently promiscuous mode disabled [...] igb3: permanently promiscuous mode disabled [...] igb0: link state changed to DOWN [...] igb3: link state changed to DOWN [...] igb0: link state changed to UP [...] igb3: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 3 1 0 0 done [...] All buffers synced. [...] Uptime: 10m9s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p11 stable/24.1-n255023-99a14409566 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Celeron(R) CPU N3160 @ 1.60GHz (1600.16-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x406c4 Family=0x6 Model=0x4c Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] Structured Extended Features3=0xc000400<MD_CLEAR,IBPB,STIBP> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8147529728 (7770 MB) [...] CPU microcode: no matching update found [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <_ _> [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20201113/tbfadt-748) [...] ioapic0 <Version 2.0> irqs 0-114 [...] Launching APs: 2 3 1 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf05b0-0xf05ce [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <_> [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0x80000000-0x80ffffff,0x90000000-0x9fffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] ahci0: <AHCI SATA controller> port 0xf060-0xf07f mem 0x81615000-0x816157ff irq 19 at device 19.0 on pci0 [...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] xhci0: <Intel Braswell USB 3.0 controller> mem 0x81600000-0x8160ffff irq 20 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [...] hdac0: <Intel Braswell HDA Controller> mem 0x81610000-0x81613fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0x81500000-0x8151ffff,0x81520000-0x81523fff irq 16 at device 0.0 on pci1 [...] igb0: NVM V0.6 imgtype1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb1: <Intel(R) I211 (Copper)> port 0xd000-0xd01f mem 0x81400000-0x8141ffff,0x81420000-0x81423fff irq 17 at device 0.0 on pci2 [...] igb1: NVM V0.6 imgtype1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb2: <Intel(R) I211 (Copper)> port 0xc000-0xc01f mem 0x81300000-0x8131ffff,0x81320000-0x81323fff irq 18 at device 0.0 on pci3 [...] igb2: NVM V0.6 imgtype1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb3: <Intel(R) I211 (Copper)> port 0xb000-0xb01f mem 0x81200000-0x8121ffff,0x81220000-0x81223fff irq 19 at device 0.0 on pci4 [...] igb3: NVM V0.6 imgtype1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] sdhci_acpi0: <Intel Bay Trail/Braswell eMMC 4.5/4.5.1 Controller> iomem 0x81617000-0x81617fff irq 45 on acpi0 [...] mmc0: <MMC/SD bus> on sdhci_acpi0 [...] uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1599947153 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Braswell HDA CODEC> at cad 2 on hdac0 [...] hdaa0: <Intel Braswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Braswell (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] mmcsd0: 31GB <MMCHC BJTD4R 0.3 SN ... MFG 02/2020 by 21 0x0000> at mmc0 200.0MHz/8bit/8192-block [...] mmcsd0boot0: 4MB partition 1 at mmcsd0 [...] mmcsd0boot1: 4MB partition 2 at mmcsd0 [...] mmcsd0rpmb: 4MB partition 3 at mmcsd0 [...] Trying to mount root from ufs:/dev/mmcsd0p2 [rw]... [...] Dual Console: Video Primary, Serial Secondary [...] uhub0: 13 ports with 13 removable, self powered