[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-STABLE GENERIC amd64 [...] FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152) [...] VT(vga): resolution 640x480 [...] CPU: AMD FX(tm)-4300 Quad-Core Processor (4085.17-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC> [...] Structured Extended Features=0x8<BMI1> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33306669056 (31763 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <GBT GBTUACPI> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. [...] ioapic0: MADT APIC ID 2 != hw id 0 [...] ioapic0 <Version 2.1> irqs 0-23 [...] Launching APs: 1 3 2 [...] random: entropy device external interface [...] md0: Preloaded image </data/XXXXXXXXXXXX 18350080 bytes at 0xffffffff8310cb90 [...] kbd1 at kbdmux0 [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf10e0-0xf10fe [...] smbios0: Version: 2.4, BCD Revision: 2.4 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <GBT GBTUACPI> [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20201113/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20201113/dspkginit-605) [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xef00-0xef7f mem 0xfb000000-0xfbffffff,0xd0000000-0xd7ffffff,0xde000000-0xdfffffff irq 18 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x0e0a) HDA Controller> mem 0xfcffc000-0xfcffffff irq 19 at device 0.1 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfdaff000-0xfdafffff irq 16 at device 0.0 on pci2 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xce00-0xceff mem 0xfdeff000-0xfdefffff,0xfddfc000-0xfddfffff irq 18 at device 0.0 on pci3 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x4c000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0xfe02f3ff irq 22 at device 17.0 on pci0 [...] ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe02e000-0xfe02efff irq 16 at device 18.0 on pci0 [...] usbus1 on ohci0 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe02d000-0xfe02dfff irq 16 at device 18.1 on pci0 [...] usbus2 on ohci1 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe02c000-0xfe02c0ff irq 17 at device 18.2 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe02b000-0xfe02bfff irq 18 at device 19.0 on pci0 [...] usbus4 on ohci2 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe02a000-0xfe02afff irq 18 at device 19.1 on pci0 [...] usbus5 on ohci3 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe029000-0xfe0290ff irq 19 at device 19.2 on pci0 [...] usbus6: EHCI version 1.0 [...] usbus6 on ehci1 [...] usbus6: 480Mbps High Speed USB v2.0 [...] atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 20.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] hdac1: <ATI SB600 HDA Controller> mem 0xfe024000-0xfe027fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] ath0: <Atheros 5416> mem 0xfdcf0000-0xfdcfffff irq 20 at device 6.0 on pci4 [...] ath0: [HT] enabling HT modes [...] ath0: [HT] RTS aggregates limited to 8 KiB [...] ath0: [HT] 2 RX streams; 2 TX streams [...] ath0: Enabling register serialisation [...] ath0: AR5416 mac 13.10 RF2133 phy 8.1 [...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00d0 [...] ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe028000-0xfe028fff irq 18 at device 20.5 on pci0 [...] usbus7 on ohci4 [...] usbus7: 12Mbps Full Speed USB v1.0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0 [...] ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode [...] ppc0: FIFO with 16/16/16 bytes threshold [...] ppbus0: <Parallel port bus> on ppc0 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 2042505243 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen3.1: <ATI EHCI root HUB> at usbus3 [...] ugen0.1: <(0x1106) XHCI root HUB> at usbus0 [...] uhub0 on usbus3 [...] uhub1 on usbus0 [...] uhub1: <(0x1106) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] ugen4.1: <ATI OHCI root HUB> at usbus4 [...] ugen6.1: <ATI EHCI root HUB> at usbus6 [...] uhub2 on usbus4 [...] uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] uhub3 on usbus6 [...] ugen5.1: <ATI OHCI root HUB> at usbus5 [...] uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 [...] ugen7.1: <ATI OHCI root HUB> at usbus7 [...] uhub4 on usbus5 [...] uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] ugen2.1: <ATI OHCI root HUB> at usbus2 [...] uhub5 on usbus7 [...] uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7 [...] ugen1.1: <ATI OHCI root HUB> at usbus1 [...] uhub6 on usbus2 [...] uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] uhub7 on usbus1 [...] uhub7: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <NVIDIA (0x0040) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0040) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x0040) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x0040) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm2: <NVIDIA (0x0040) (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Realtek ALC892 (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm4: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm5: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa1 [...] Trying to mount root from ufs:/dev/md0 []... [...] uhub5: 2 ports with 2 removable, self powered [...] uhub7: 3 ports with 3 removable, self powered [...] uhub2: 3 ports with 3 removable, self powered [...] uhub4: 3 ports with 3 removable, self powered [...] uhub6: 3 ports with 3 removable, self powered [...] uhub1: 5 ports with 4 removable, self powered [...] ugen0.2: <vendor 0x2109 USB2.0 Hub> at usbus0 [...] uhub8 on uhub1 [...] uhub8: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.10/4.20, addr 1> on usbus0 [...] Root mount waiting for: CAM [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <CT240BX500SSD1 M6CR041> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <CT480BX500SSD1 M6CR041> ACS-3 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada1: Command Queueing enabled [...] ada1: 457862MB (937703088 512 byte sectors) [...] ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada2: <KINGSTON SA400S37240G SBFKB1E1> ACS-3 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada2: Command Queueing enabled [...] ada2: 228936MB (468862128 512 byte sectors) [...] ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada3: <KINGSTON SA400S37240G S1Z40102> ACS-3 ATA SATA 3.x device [...] ada3: Serial Number... [...] ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada3: Command Queueing enabled [...] ada3: 228936MB (468862128 512 byte sectors) [...] GEOM_RAID: Promise: Array Promise created. [...] GEOM_RAID: Promise: Disk ada2 state changed from NONE to ACTIVE. [...] GEOM_RAID: Promise: Subdisk RAID 0 LD 1:2-ada2 state changed from NONE to ACTIVE. [...] GEOM_RAID: Promise: Disk ada0 state changed from NONE to ACTIVE. [...] GEOM_RAID: Promise: Subdisk RAID 0 LD 1:0-ada0 state changed from NONE to ACTIVE. [...] GEOM_RAID: Promise: Disk ada1 state changed from NONE to ACTIVE. [...] GEOM_RAID: Promise: Subdisk RAID 0 LD 1:1-ada1 state changed from NONE to ACTIVE. [...] GEOM_RAID: Promise: Disk ada3 state changed from NONE to ACTIVE. [...] GEOM_RAID: Promise: Subdisk RAID 0 LD 1:3-ada3 state changed from NONE to ACTIVE. [...] GEOM_RAID: Promise: Volume started. [...] GEOM_RAID: Promise: Volume RAID 0 LD 1 state changed from STARTING to OPTIMAL. [...] GEOM_RAID: Promise: Provider raid/r0 for volume RAID 0 LD 1 created. [...] uhub8: 4 ports with 4 removable, self powered [...] uhub3: 6 ports with 6 removable, self powered [...] uhub0: 6 ports with 6 removable, self powered [...] ugen1.2: <vendor 0x0000 USB OPTICAL MOUSE> at usbus1 [...] ugen2.2: <vendor 0x04f3 product 0x0103> at usbus2 [...] ukbd0 on uhub6 [...] ukbd0: <vendor 0x04f3 product 0x0103, class 0/0, rev 2.00/1.07, addr 2> on usbus2 [...] kbd2 at ukbd0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device USB Disk 2.0 (0x346d:0x5678) [...] ugen6.2: <USB Disk 2.0> at usbus6 [...] umass0 on uhub3 [...] umass0: <USB Disk 2.0, class 0/0, rev 2.00/2.00, addr 2> on usbus6 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:7:0: Attached to scbus7 [...] da0 at umass-sim0 bus 0 scbus7 target 0 lun 0 [...] da0: <VendorCo ProductCode 2.00> Removable Direct Access SPC-2 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 15000MB (30720000 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] Trying to mount root from zfs:livecd []... [...] random: unblocking device. [...] Cuse v0.1.37 @ /dev/cuse [...] intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 [...] intsmb0: intr SMI enabled revision 0 [...] intsmb0: using polling mode when configured interrupt is SMI [...] smbus0: <System Management Bus> on intsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] wlan0: Ethernet address: ... [...] ums0 on uhub7 [...] ums0: <vendor 0x0000 USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 2> on usbus1 [...] ums0: 3 buttons and [XYZ] coordinates ID=1 [...] uhid0 on uhub6 [...] uhid0: <vendor 0x04f3 product 0x0103, class 0/0, rev 2.00/1.07, addr 2> on usbus2 [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled