[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248053-232cb14f501 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (2000.08-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x30679 Family=0x6 Model=0x37 Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] Structured Extended Features3=0xc000000<IBPB,STIBP> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8154279936 (7776 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20201113/tbfadt-748) [...] ioapic0 <Version 2.0> irqs 0-86 [...] Launching APs: 3 1 2 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] aesni0: No AES or SHA support. [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xc8000000-0xc83fffff,0xc0000000-0xc7ffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xc8b12000-0xc8b127ff irq 19 at device 19.0 on pci0 [...] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] xhci0: <Intel BayTrail USB 3.0 controller> mem 0xc8b00000-0xc8b0ffff irq 20 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <PCI-PCI bridge> irq 17 at device 1.0 on pci2 [...] pci3: <PCI bus> on pcib3 [...] igb0: <Intel(R) I211 (Copper)> port 0xc000-0xc01f mem 0xc8800000-0xc881ffff,0xc8820000-0xc8823fff irq 17 at device 0.0 on pci3 [...] igb0: NVM V0.6 imgtype1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <PCI-PCI bridge> irq 19 at device 3.0 on pci2 [...] pci4: <PCI bus> on pcib4 [...] pcib5: <PCI-PCI bridge> irq 17 at device 5.0 on pci2 [...] pci5: <PCI bus> on pcib5 [...] igb1: <Intel(R) I211 (Copper)> port 0xb000-0xb01f mem 0xc8700000-0xc871ffff,0xc8720000-0xc8723fff irq 17 at device 0.0 on pci5 [...] igb1: NVM V0.6 imgtype1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib6: <PCI-PCI bridge> irq 19 at device 7.0 on pci2 [...] pci6: <PCI bus> on pcib6 [...] igb2: <Intel(R) I211 (Copper)> port 0xa000-0xa01f mem 0xc8600000-0xc861ffff,0xc8620000-0xc8623fff irq 19 at device 0.0 on pci6 [...] igb2: NVM V0.6 imgtype1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] igb3: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0xc8a00000-0xc8a1ffff,0xc8a20000-0xc8a23fff irq 18 at device 0.0 on pci8 [...] igb3: NVM V0.6 imgtype1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib9: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] igb4: <Intel(R) I211 (Copper)> port 0xd000-0xd01f mem 0xc8900000-0xc891ffff,0xc8920000-0xc8923fff irq 19 at device 0.0 on pci9 [...] igb4: NVM V0.6 imgtype1 [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 2 RX queues 2 TX queues [...] igb4: Using MSI-X interrupts with 3 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 2/1024, RX 2/1024 [...] ehci0: <Intel BayTrail USB 2.0 controller> mem 0xc8b11000-0xc8b113ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 2000001516 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub1 on usbus0 [...] uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] Root mount waiting for: CAM usbus0 usbus1 [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 [...] ada0: <KINGSTON SA400S37120G R0105A> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] uhub1: 7 ports with 7 removable, self powered [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] uhub0: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus1 [...] ugen1.2: <vendor 0x8087 product 0x07e6> at usbus1 [...] uhub2 on uhub0 [...] uhub2: <vendor 0x8087 product 0x07e6, class 9/0, rev 2.00/0.17, addr 2> on usbus1 [...] uhub2: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus1 [...] ugen1.3: <vendor 0x413c Dell KB216 Wired Keyboard> at usbus1 [...] ukbd0 on uhub2 [...] ukbd0: <vendor 0x413c Dell KB216 Wired Keyboard, class 0/0, rev 1.10/1.08, addr 3> on usbus1 [...] kbd1 at ukbd0 [...] mountroot: waiting for device /dev/gpt/rootfs... [...] ichsmb0: <Intel Baytrail SMBus controller> port 0xf000-0xf01f mem 0xc8b10000-0xc8b1001f irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] uhid0 on uhub2 [...] uhid0: <vendor 0x413c Dell KB216 Wired Keyboard, class 0/0, rev 1.10/1.08, addr 3> on usbus1 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] ugen1.3: <vendor 0x413c Dell KB216 Wired Keyboard> at usbus1 (disconnected) [...] ukbd0: at uhub2, port 2, addr 3 (disconnected) [...] ukbd0: detached [...] uhid0: at uhub2, port 2, addr 3 (disconnected) [...] uhid0: detached [...] igb1: link state changed to UP [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ng0: changing name to 'pppoe0' [...] igb0: link state changed to UP [...] ng0: changing name to 'pppoe0' [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 4 4 1 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] All buffers synced. [...] Uptime: 23m46s [...] uhub2: detached [...] uhub0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248053-232cb14f501 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (2000.08-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x30679 Family=0x6 Model=0x37 Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] Structured Extended Features3=0xc000000<IBPB,STIBP> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8154279936 (7776 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20201113/tbfadt-748) [...] ioapic0 <Version 2.0> irqs 0-86 [...] Launching APs: 2 1 3 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] aesni0: No AES or SHA support. [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xc8000000-0xc83fffff,0xc0000000-0xc7ffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xc8b12000-0xc8b127ff irq 19 at device 19.0 on pci0 [...] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] xhci0: <Intel BayTrail USB 3.0 controller> mem 0xc8b00000-0xc8b0ffff irq 20 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <PCI-PCI bridge> irq 17 at device 1.0 on pci2 [...] pci3: <PCI bus> on pcib3 [...] igb0: <Intel(R) I211 (Copper)> port 0xc000-0xc01f mem 0xc8800000-0xc881ffff,0xc8820000-0xc8823fff irq 17 at device 0.0 on pci3 [...] igb0: NVM V0.6 imgtype1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <PCI-PCI bridge> irq 19 at device 3.0 on pci2 [...] pci4: <PCI bus> on pcib4 [...] pcib5: <PCI-PCI bridge> irq 17 at device 5.0 on pci2 [...] pci5: <PCI bus> on pcib5 [...] igb1: <Intel(R) I211 (Copper)> port 0xb000-0xb01f mem 0xc8700000-0xc871ffff,0xc8720000-0xc8723fff irq 17 at device 0.0 on pci5 [...] igb1: NVM V0.6 imgtype1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib6: <PCI-PCI bridge> irq 19 at device 7.0 on pci2 [...] pci6: <PCI bus> on pcib6 [...] igb2: <Intel(R) I211 (Copper)> port 0xa000-0xa01f mem 0xc8600000-0xc861ffff,0xc8620000-0xc8623fff irq 19 at device 0.0 on pci6 [...] igb2: NVM V0.6 imgtype1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] igb3: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0xc8a00000-0xc8a1ffff,0xc8a20000-0xc8a23fff irq 18 at device 0.0 on pci8 [...] igb3: NVM V0.6 imgtype1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib9: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] igb4: <Intel(R) I211 (Copper)> port 0xd000-0xd01f mem 0xc8900000-0xc891ffff,0xc8920000-0xc8923fff irq 19 at device 0.0 on pci9 [...] igb4: NVM V0.6 imgtype1 [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 2 RX queues 2 TX queues [...] igb4: Using MSI-X interrupts with 3 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 2/1024, RX 2/1024 [...] ehci0: <Intel BayTrail USB 2.0 controller> mem 0xc8b11000-0xc8b113ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 2000001163 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] Root mount waiting for: CAM usbus0 usbus1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 [...] ada0: <KINGSTON SA400S37120G R0105A> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] uhub0: 7 ports with 7 removable, self powered [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] uhub1: 8 ports with 8 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x07e6> at usbus1 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x07e6, class 9/0, rev 2.00/0.17, addr 2> on usbus1 [...] uhub2: 4 ports with 4 removable, self powered [...] mountroot: waiting for device /dev/gpt/rootfs... [...] igb0: link state changed to UP [...] debugnet_any_ifnet_update: Bad dn_init result from igb0 (ifp 0xfffff8000179f800), ignoring. [...] igb1: link state changed to UP [...] debugnet_any_ifnet_update: Bad dn_init result from igb1 (ifp 0xfffff80001814800), ignoring. [...] ichsmb0: <Intel Baytrail SMBus controller> port 0xf000-0xf01f mem 0xc8b10000-0xc8b1001f irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] igb0: link state changed to DOWN [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ng0: changing name to 'pppoe0' [...] igb1: link state changed to DOWN [...] pflog0: permanently promiscuous mode enabled [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] pid 14017 (sh), jid 0, uid 0: exited on signal 10 (core dumped) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... fsync: giving up on dirty (error = 35) 0xfffff80001bd3d58: type VCHR [...] usecount 1, writecount 0, refcount 502 seqc users 0 rdev 0xfffff80001a85c00 [...] hold count flags () [...] flags () [...] v_object 0xfffff80001bbbe70 ref 0 pages 7898 cleanbuf 499 dirtybuf 1 [...] lock type mntfs: EXCL by thread 0xfffffe0090522740 (pid 18, syncer, tid 100095) [...] [...] Syncing disks, vnodes remaining... 2 2 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] All buffers synced. [...] Uptime: 8m19s [...] uhub2: detached [...] uhub1: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248057-239b52c9023 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (2000.08-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x30679 Family=0x6 Model=0x37 Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] Structured Extended Features3=0xc000000<IBPB,STIBP> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8154279936 (7776 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20201113/tbfadt-748) [...] ioapic0 <Version 2.0> irqs 0-86 [...] Launching APs: 2 1 3 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] aesni0: No AES or SHA support. [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xc8000000-0xc83fffff,0xc0000000-0xc7ffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xc8b12000-0xc8b127ff irq 19 at device 19.0 on pci0 [...] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] xhci0: <Intel BayTrail USB 3.0 controller> mem 0xc8b00000-0xc8b0ffff irq 20 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <PCI-PCI bridge> irq 17 at device 1.0 on pci2 [...] pci3: <PCI bus> on pcib3 [...] igb0: <Intel(R) I211 (Copper)> port 0xc000-0xc01f mem 0xc8800000-0xc881ffff,0xc8820000-0xc8823fff irq 17 at device 0.0 on pci3 [...] igb0: NVM V0.6 imgtype1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <PCI-PCI bridge> irq 19 at device 3.0 on pci2 [...] pci4: <PCI bus> on pcib4 [...] pcib5: <PCI-PCI bridge> irq 17 at device 5.0 on pci2 [...] pci5: <PCI bus> on pcib5 [...] igb1: <Intel(R) I211 (Copper)> port 0xb000-0xb01f mem 0xc8700000-0xc871ffff,0xc8720000-0xc8723fff irq 17 at device 0.0 on pci5 [...] igb1: NVM V0.6 imgtype1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib6: <PCI-PCI bridge> irq 19 at device 7.0 on pci2 [...] pci6: <PCI bus> on pcib6 [...] igb2: <Intel(R) I211 (Copper)> port 0xa000-0xa01f mem 0xc8600000-0xc861ffff,0xc8620000-0xc8623fff irq 19 at device 0.0 on pci6 [...] igb2: NVM V0.6 imgtype1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] igb3: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0xc8a00000-0xc8a1ffff,0xc8a20000-0xc8a23fff irq 18 at device 0.0 on pci8 [...] igb3: NVM V0.6 imgtype1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib9: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] igb4: <Intel(R) I211 (Copper)> port 0xd000-0xd01f mem 0xc8900000-0xc891ffff,0xc8920000-0xc8923fff irq 19 at device 0.0 on pci9 [...] igb4: NVM V0.6 imgtype1 [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 2 RX queues 2 TX queues [...] igb4: Using MSI-X interrupts with 3 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 2/1024, RX 2/1024 [...] ehci0: <Intel BayTrail USB 2.0 controller> mem 0xc8b11000-0xc8b113ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 2000001372 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] Root mount waiting for: CAM usbus0 usbus1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 [...] ada0: <KINGSTON SA400S37120G R0105A> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] uhub0: 7 ports with 7 removable, self powered [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] uhub1: 8 ports with 8 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x07e6> at usbus1 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x07e6, class 9/0, rev 2.00/0.17, addr 2> on usbus1 [...] uhub2: 4 ports with 4 removable, self powered [...] mountroot: waiting for device /dev/gpt/rootfs...