[...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE-p3 GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i5-2300 CPU @ 2.80GHz (2809.52-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1f9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8251326464 (7869 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 2 3 1 [...] Timecounter "TSC-low" frequency 1404757854 Hz quality 1000 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] 000.000023 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff81114e40, 0) error 19 [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] acpi0: <ALASKA A M I> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe8000000-0xefffffff,0xf0000000-0xf1ffffff irq 16 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA GF119 HDA Controller> mem 0xf7080000-0xf7083fff irq 17 at device 0.1 on pci1 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xf7207000-0xf72073ff irq 23 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Cougar Point HDA Controller> mem 0xf7200000-0xf7203fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] atapci0: <VIA ATA controller> port 0xd040-0xd047,0xd030-0xd033,0xd020-0xd027,0xd010-0xd013,0xd000-0xd00f irq 16 at device 0.0 on pci3 [...] ata2: <ATA channel> at channel 0 on atapci0 [...] ata3: <ATA channel> at channel 1 on atapci0 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xc000-0xc0ff mem 0xf2104000-0xf2104fff,0xf2100000-0xf2103fff irq 18 at device 0.0 on pci4 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x2c000000 [...] re0: MAC rev. 0x00200000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci5 [...] pci6: <ACPI PCI bus> on pcib6 [...] ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xf7206000-0xf72063ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci1: <Intel Cougar Point SATA600 controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf09f,0xf080-0xf08f irq 19 at device 31.2 on pci0 [...] ata4: <ATA channel> at channel 0 on atapci1 [...] ata5: <ATA channel> at channel 1 on atapci1 [...] atapci2: <Intel Cougar Point SATA300 controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf030-0xf03f,0xf020-0xf02f irq 19 at device 31.5 on pci0 [...] ata6: <ATA channel> at channel 0 on atapci2 [...] ata7: <ATA channel> at channel 1 on atapci2 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcdfff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] hdacc0: <NVIDIA (0x001c) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x001c) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm3: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm4: <Realtek ALC887 (Rear Digital)> at nid 30 on hdaa1 [...] pcm5: <Realtek ALC887 (Onboard Digital)> at nid 17 on hdaa1 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] Trying to mount root from zfs:GuybrushFury/ROOT/default []... [...] Root mount waiting for: usbus0 CAM usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 CAM usbus1 [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] Root mount waiting for: usbus0 CAM usbus1 [...] uhub2: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] Root mount waiting for: CAM usbus1 [...] ugen1.3: <Philips Philips SHG7980> at usbus1 [...] ada0 at ata4 bus 0 scbus2 target 0 lun 0 [...] ada0: <WDC WD20EARX-00ZUDB0 80.00A80> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes) [...] ada0: 1907729MB (3907029168 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] GEOM_ELI: Device ada0p4.eli created. [...] GEOM_ELI: Encryption: AES-XTS 256 [...] GEOM_ELI: Crypto: hardware [...] ugen1.4: <Logitech Gaming Mouse G400> at usbus1 [...] Root mount waiting for: usbus1 [...] ugen1.5: <vendor 0x1a40 USB 2.0 Hub> at usbus1 [...] uhub4 on uhub3 [...] uhub4: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 5> on usbus1 [...] uhub4: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus1 [...] ugen1.6: <Google, Inc Android> at usbus1 [...] GEOM_ELI: Device ada0p3.eli created. [...] GEOM_ELI: Encryption: AES-XTS 128 [...] GEOM_ELI: Crypto: hardware [...] Cuse v0.1.36 @ /dev/cuse [...] nvidia0: <GeForce GT 610> on vgapci0 [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: child nvidia0 requested pci_enable_io [...] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.138 Thu May 14 04:04:42 PDT 2020 [...] lo0: link state changed to UP [...] re0: link state changed to UP [...] uaudio0 on uhub3 [...] uaudio0: <Philips Philips SHG7980, class 0/0, rev 2.00/1.76, addr 3> on usbus1 [...] uaudio0: Play[0]: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: No MIDI sequencer. [...] pcm6: <USB audio> on uaudio0 [...] uaudio0: No HID volume keys found. [...] uhid0 on uhub3 [...] uhid0: <Philips Philips SHG7980, class 0/0, rev 2.00/1.76, addr 3> on usbus1 [...] uhid1 on uhub3 [...] uhid1: <Logitech Gaming Mouse G400, class 0/0, rev 2.00/69.00, addr 4> on usbus1 [...] ums0 on uhub3 [...] ums0: <Logitech Gaming Mouse G400, class 0/0, rev 2.00/69.00, addr 4> on usbus1 [...] ums0: 8 buttons and [XYZ] coordinates ID=0 [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] All buffers synced. [...] Uptime: 3m28s [...] GEOM_ELI: Device ada0p3.eli destroyed. [...] GEOM_ELI: Detached ada0p3.eli on last close. [...] GEOM_ELI: Device ada0p4.eli destroyed. [...] GEOM_ELI: Detached ada0p4.eli on last close. [...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE-p3 GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i5-2300 CPU @ 2.80GHz (2809.52-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1f9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8251326464 (7869 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 3 2 1 [...] Timecounter "TSC-low" frequency 1404759756 Hz quality 1000 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] 000.000023 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff81114e40, 0) error 19 [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] acpi0: <ALASKA A M I> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe8000000-0xefffffff,0xf0000000-0xf1ffffff irq 16 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA GF119 HDA Controller> mem 0xf7080000-0xf7083fff irq 17 at device 0.1 on pci1 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xf7207000-0xf72073ff irq 23 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Cougar Point HDA Controller> mem 0xf7200000-0xf7203fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] atapci0: <VIA ATA controller> port 0xd040-0xd047,0xd030-0xd033,0xd020-0xd027,0xd010-0xd013,0xd000-0xd00f irq 16 at device 0.0 on pci3 [...] ata2: <ATA channel> at channel 0 on atapci0 [...] ata3: <ATA channel> at channel 1 on atapci0 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xc000-0xc0ff mem 0xf2104000-0xf2104fff,0xf2100000-0xf2103fff irq 18 at device 0.0 on pci4 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x2c000000 [...] re0: MAC rev. 0x00200000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci5 [...] pci6: <ACPI PCI bus> on pcib6 [...] ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xf7206000-0xf72063ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci1: <Intel Cougar Point SATA600 controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf09f,0xf080-0xf08f irq 19 at device 31.2 on pci0 [...] ata4: <ATA channel> at channel 0 on atapci1 [...] ata5: <ATA channel> at channel 1 on atapci1 [...] atapci2: <Intel Cougar Point SATA300 controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf030-0xf03f,0xf020-0xf02f irq 19 at device 31.5 on pci0 [...] ata6: <ATA channel> at channel 0 on atapci2 [...] ata7: <ATA channel> at channel 1 on atapci2 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcdfff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] hdacc0: <NVIDIA (0x001c) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x001c) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm3: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm4: <Realtek ALC887 (Rear Digital)> at nid 30 on hdaa1 [...] pcm5: <Realtek ALC887 (Onboard Digital)> at nid 17 on hdaa1 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] uhub0: Trying to mount root from zfs:GuybrushFury/ROOT/default []... [...] <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] Root mount waiting for: usbus0 CAM usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 CAM usbus1 [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] Root mount waiting for: usbus0 CAM usbus1 [...] uhub2: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] Root mount waiting for: CAM usbus1 [...] ugen1.3: <Philips Philips SHG7980> at usbus1 [...] ada0 at ata4 bus 0 scbus2 target 0 lun 0 [...] ada0: <WDC WD20EARX-00ZUDB0 80.00A80> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes) [...] ada0: 1907729MB (3907029168 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] GEOM_ELI: Device ada0p4.eli created. [...] GEOM_ELI: Encryption: AES-XTS 256 [...] GEOM_ELI: Crypto: hardware [...] ugen1.4: <Logitech Gaming Mouse G400> at usbus1 [...] ugen1.5: <vendor 0x1a40 USB 2.0 Hub> at usbus1 [...] uhub4 on uhub3 [...] uhub4: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 5> on usbus1 [...] Root mount waiting for: usbus1 [...] uhub4: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus1 [...] ugen1.6: <Google, Inc Android> at usbus1 [...] ugen1.7: <Yubico Yubico Yubikey II> at usbus1 [...] ukbd0 on uhub4 [...] ukbd0: <Yubico Yubico Yubikey II, class 0/0, rev 2.00/2.23, addr 7> on usbus1 [...] kbd2 at ukbd0 [...] GEOM_ELI: Device ada0p3.eli created. [...] GEOM_ELI: Encryption: AES-XTS 128 [...] GEOM_ELI: Crypto: hardware [...] Cuse v0.1.36 @ /dev/cuse [...] nvidia0: <GeForce GT 610> on vgapci0 [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: child nvidia0 requested pci_enable_io [...] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.138 Thu May 14 04:04:42 PDT 2020 [...] lo0: link state changed to UP [...] re0: link state changed to UP [...] uaudio0 on uhub3 [...] uaudio0: <Philips Philips SHG7980, class 0/0, rev 2.00/1.76, addr 3> on usbus1 [...] uaudio0: Play[0]: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: No MIDI sequencer. [...] pcm6: <USB audio> on uaudio0 [...] uaudio0: No HID volume keys found. [...] uhid0 on uhub3 [...] uhid0: <Philips Philips SHG7980, class 0/0, rev 2.00/1.76, addr 3> on usbus1 [...] uhid1 on uhub3 [...] uhid1: <Logitech Gaming Mouse G400, class 0/0, rev 2.00/69.00, addr 4> on usbus1 [...] ums0 on uhub3 [...] ums0: <Logitech Gaming Mouse G400, class 0/0, rev 2.00/69.00, addr 4> on usbus1 [...] ums0: 8 buttons and [XYZ] coordinates ID=0 [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] ugen1.7: <Yubico Yubico Yubikey II> at usbus1 (disconnected) [...] ukbd0: at uhub4, port 4, addr 7 (disconnected) [...] ukbd0: detached [...] ugen1.6: <Google, Inc Android> at usbus1 (disconnected) [...] ugen1.6: <Google, Inc Android> at usbus1 [...] ugen1.6: <Google, Inc Android> at usbus1 (disconnected) [...] ugen1.6: <asus Nexus 7> at usbus1 [...] ugen1.6: <asus Nexus 7> at usbus1 (disconnected) [...] ugen1.6: <Google, Inc Android> at usbus1 [...] ugen1.6: <Google, Inc Android> at usbus1 (disconnected) [...] ugen1.6: <asus Nexus 7> at usbus1 [...] ugen1.6: <asus Nexus 7> at usbus1 (disconnected) [...] ugen1.6: <Google, Inc Android> at usbus1 [...] ugen1.6: <Google, Inc Android> at usbus1 (disconnected) [...] ugen1.6: <Asus Nexus 7> at usbus1 [...] ugen1.6: <Asus Nexus 7> at usbus1 (disconnected) [...] ugen1.6: <Asus Nexus 7> at usbus1 [...] ugen1.6: <Asus Nexus 7> at usbus1 (disconnected) [...] ugen1.6: <Asus Nexus 7> at usbus1 [...] ugen1.6: <Asus Nexus 7> at usbus1 (disconnected) [...] ugen1.6: <Asus Nexus 7> at usbus1 [...] ugen1.6: <Asus Nexus 7> at usbus1 (disconnected) [...] ugen1.6: <Google, Inc Android> at usbus1 [...] ugen1.6: <Google, Inc Android> at usbus1 (disconnected) [...] ugen1.6: <Google, Inc Android> at usbus1 [...] ugen1.6: <Google, Inc Android> at usbus1 (disconnected) [...] ugen1.6: <Google, Inc Android> at usbus1 [...] ugen1.6: <Google, Inc Android> at usbus1 (disconnected) [...] ugen1.6: <Google, Inc Android> at usbus1 [...] ugen1.6: <Google, Inc Android> at usbus1 (disconnected) [...] ugen1.6: <Google, Inc Android> at usbus1 [...] ugen1.6: <Google, Inc Android> at usbus1 (disconnected) [...] ugen1.6: <Google, Inc Android> at usbus1 [...] ugen1.6: <Google, Inc Android> at usbus1 (disconnected) [...] ugen1.6: <Google, Inc Android> at usbus1 [...] ugen1.6: <Google, Inc Android> at usbus1 (disconnected) [...] ugen1.6: <Asus Nexus 7> at usbus1 [...] ugen1.6: <Asus Nexus 7> at usbus1 (disconnected) [...] ugen1.6: <Asus Nexus 7> at usbus1 [...] ugen1.6: <Asus Nexus 7> at usbus1 (disconnected) [...] ugen1.6: <Asus Nexus 7> at usbus1 [...] ugen1.6: <Asus Nexus 7> at usbus1 (disconnected) [...] ugen1.6: <Google, Inc Android> at usbus1 [...] ugen1.6: <Google, Inc Android> at usbus1 (disconnected) [...] ugen1.6: <Asus Nexus 7> at usbus1 [...] ugen1.6: <Asus Nexus 7> at usbus1 (disconnected) [...] ugen1.6: <Asus Nexus 7> at usbus1 [...] ugen1.6: <Asus Nexus 7> at usbus1 (disconnected) [...] ugen1.6: <asus Nexus 7> at usbus1 [...] ugen1.6: <asus Nexus 7> at usbus1 (disconnected) [...] ugen1.6: <asus Nexus 7> at usbus1 [...] ugen1.6: <asus Nexus 7> at usbus1 (disconnected) [...] ugen1.6: <Google, Inc Android> at usbus1 [...] ugen1.6: <Google, Inc Android> at usbus1 (disconnected) [...] ugen1.6: <Asus Nexus 7> at usbus1 [...] ugen1.6: <Asus Nexus 7> at usbus1 (disconnected) [...] ugen1.6: <Asus Nexus 7> at usbus1 [...] ugen1.6: <Asus Nexus 7> at usbus1 (disconnected) [...] ugen1.6: <Asus Nexus 7> at usbus1 [...] ugen1.6: <Asus Nexus 7> at usbus1 (disconnected) [...] ugen1.6: <Asus Nexus 7> at usbus1 [...] ugen1.6: <Asus Nexus 7> at usbus1 (disconnected) [...] ugen1.6: <Asus Nexus 7> at usbus1 [...] ugen1.6: <Asus Nexus 7> at usbus1 (disconnected) [...] ugen1.6: <Android Android> at usbus1 [...] ugen1.6: <Android Android> at usbus1 (disconnected) [...] ugen1.6: <Yubico Yubikey NEO OTP+CCID> at usbus1 [...] ukbd0 on uhub4 [...] ukbd0: <Yubico Yubikey NEO OTP+CCID, class 0/0, rev 2.00/3.20, addr 6> on usbus1 [...] kbd2 at ukbd0 [...] ugen1.6: <Yubico Yubikey NEO OTP+CCID> at usbus1 (disconnected) [...] ukbd0: at uhub4, port 4, addr 6 (disconnected) [...] ukbd0: detached [...] ugen1.6: <Yubico Yubikey NEO OTP+CCID> at usbus1 [...] ukbd0 on uhub4 [...] ukbd0: <Yubico Yubikey NEO OTP+CCID, class 0/0, rev 2.00/3.20, addr 6> on usbus1 [...] kbd2 at ukbd0 [...] ugen1.6: <Yubico Yubikey NEO OTP+CCID> at usbus1 (disconnected) [...] ukbd0: at uhub4, port 4, addr 6 (disconnected) [...] ukbd0: detached [...] ugen1.6: <Yubico Yubikey NEO OTP+CCID> at usbus1 [...] ukbd0 on uhub4 [...] ukbd0: <Yubico Yubikey NEO OTP+CCID, class 0/0, rev 2.00/3.20, addr 6> on usbus1 [...] kbd2 at ukbd0 [...] ugen1.6: <Yubico Yubikey NEO OTP+CCID> at usbus1 (disconnected) [...] ukbd0: at uhub4, port 4, addr 6 (disconnected) [...] ukbd0: detached