Probe #e8d9bcc31e of AMI Aptio CRB

Log: dmesg

[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p6 stable/24.7-n267981-8375762712f SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(efifb): resolution 800x600 [...] CPU microcode: updated from 0x82d to 0x838 [...] CPU: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (2000.08-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] Structured Extended Features3=0xc000400<MD_CLEAR,IBPB,STIBP> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8129716224 (7753 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20221020/tbfadt-748) [...] ioapic0 <Version 2.0> irqs 0-86 [...] Launching APs: 3 2 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] kernel trap 12 with interrupts disabled [...] kernel trap 12 with interrupts disabled [...] smbios0: <System Management BIOS> at iomem 0xb9b67098-0xb9b670b6 [...] smbios0: Version: 2.8, BCD Revision: 2.7 [...] aesni0: No AES or SHA support. [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd0a16000-0xd0a167ff at device 19.0 on pci0 [...] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] xhci0: <Intel BayTrail USB 3.0 controller> mem 0xd0a00000-0xd0a0ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [...] hdac0: <Intel BayTrail HDA Controller> mem 0xd0a10000-0xd0a13fff at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0xd0900000-0xd091ffff,0xd0920000-0xd0923fff at device 0.0 on pci1 [...] igb0: NVM V0.6 imgtype1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using an MSI interrupt [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb1: <Intel(R) I211 (Copper)> port 0xd000-0xd01f mem 0xd0800000-0xd081ffff,0xd0820000-0xd0823fff at device 0.0 on pci2 [...] igb1: NVM V0.6 imgtype1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using an MSI interrupt [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb2: <Intel(R) I211 (Copper)> port 0xc000-0xc01f mem 0xd0700000-0xd071ffff,0xd0720000-0xd0723fff at device 0.0 on pci3 [...] igb2: NVM V0.6 imgtype1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using an MSI interrupt [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb3: <Intel(R) I211 (Copper)> port 0xb000-0xb01f mem 0xd0600000-0xd061ffff,0xd0620000-0xd0623fff at device 0.0 on pci4 [...] igb3: NVM V0.6 imgtype1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using an MSI interrupt [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 1/1024, RX 1/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 720000001839 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 720000001839 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 720000001839 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 720000001839 [...] device_attach: est3 attach returned 6 [...] Timecounter "TSC" frequency 1999999501 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Intel Valleyview2 HDA CODEC> at cad 2 on hdac0 [...] hdaa0: <Intel Valleyview2 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Valleyview2 (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 [...] ada0: <KINGSTON MSATA SSD 256GB W0220A0> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] uhub0: 7 ports with 7 removable, self powered [...] ugen0.2: <Ralink 802.11 n WLAN> at usbus0 [...] run0 on uhub0 [...] run0: <Ralink 802.11 n WLAN, class 0/0, rev 2.00/1.01, addr 1> on usbus0 [...] run0: MAC/BBP RT3070 (rev 0x0201), RF RT3020 (MIMO 1T1R), address XXX [...] run0: [HT] Enabling 802.11n [...] Root mount waiting for: usbus0 [...] ugen0.3: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/85.36, addr 2> on usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.4: <Logitech USB Receiver> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/24.11, addr 3> on usbus0 [...] kbd1 at ukbd0 [...] CPU: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (2000.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] Structured Extended Features3=0xc000400<MD_CLEAR,IBPB,STIBP> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] igb1: link state changed to UP [...] igb0: link state changed to UP [...] ichsmb0: <Intel Baytrail SMBus controller> port 0xf000-0xf01f mem 0xd0a14000-0xd0a1401f at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] ums0 on uhub1 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/24.11, addr 3> on usbus0 [...] ums0: 16 buttons and [XYZT] coordinates ID=2 [...] uhid0 on uhub1 [...] uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/24.11, addr 3> on usbus0 [...] lo0: link state changed to UP [...] kernel trap 12 with interrupts disabled [...] kernel trap 12 with interrupts disabled [...] aesni0: No AES or SHA support. [...] qat_ocf0: <QAT engine> [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 720000001839 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 720000001839 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 720000001839 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 720000001839 [...] device_attach: est3 attach returned 6 [...] pflog0: permanently promiscuous mode enabled [...] igb0: link state changed to DOWN [...] igb1: link state changed to DOWN [...] ng0: changing name to 'pppoe0' [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] ipsec0: changing name to 'ipsec1' [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] All buffers synced. [...] Uptime: 4d3h58m10s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p6 stable/24.7-n267981-8375762712f SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(efifb): resolution 800x600 [...] CPU microcode: updated from 0x82d to 0x838 [...] CPU: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (2000.08-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] Structured Extended Features3=0xc000400<MD_CLEAR,IBPB,STIBP> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8129712128 (7753 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20221020/tbfadt-748) [...] ioapic0 <Version 2.0> irqs 0-86 [...] Launching APs: 3 2 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] kernel trap 12 with interrupts disabled [...] kernel trap 12 with interrupts disabled [...] smbios0: <System Management BIOS> at iomem 0xb9b67098-0xb9b670b6 [...] smbios0: Version: 2.8, BCD Revision: 2.7 [...] aesni0: No AES or SHA support. [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd0a16000-0xd0a167ff at device 19.0 on pci0 [...] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] xhci0: <Intel BayTrail USB 3.0 controller> mem 0xd0a00000-0xd0a0ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [...] hdac0: <Intel BayTrail HDA Controller> mem 0xd0a10000-0xd0a13fff at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0xd0900000-0xd091ffff,0xd0920000-0xd0923fff at device 0.0 on pci1 [...] igb0: NVM V0.6 imgtype1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using an MSI interrupt [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb1: <Intel(R) I211 (Copper)> port 0xd000-0xd01f mem 0xd0800000-0xd081ffff,0xd0820000-0xd0823fff at device 0.0 on pci2 [...] igb1: NVM V0.6 imgtype1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using an MSI interrupt [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb2: <Intel(R) I211 (Copper)> port 0xc000-0xc01f mem 0xd0700000-0xd071ffff,0xd0720000-0xd0723fff at device 0.0 on pci3 [...] igb2: NVM V0.6 imgtype1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using an MSI interrupt [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb3: <Intel(R) I211 (Copper)> port 0xb000-0xb01f mem 0xd0600000-0xd061ffff,0xd0620000-0xd0623fff at device 0.0 on pci4 [...] igb3: NVM V0.6 imgtype1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using an MSI interrupt [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 1/1024, RX 1/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 720000001839 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 720000001839 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 720000001839 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 720000001839 [...] device_attach: est3 attach returned 6 [...] Timecounter "TSC" frequency 1999999467 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Intel Valleyview2 HDA CODEC> at cad 2 on hdac0 [...] hdaa0: <Intel Valleyview2 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Valleyview2 (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 [...] ada0: <KINGSTON MSATA SSD 256GB W0220A0> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] uhub0: 7 ports with 7 removable, self powered [...] ugen0.2: <Ralink 802.11 n WLAN> at usbus0 [...] run0 on uhub0 [...] run0: <Ralink 802.11 n WLAN, class 0/0, rev 2.00/1.01, addr 1> on usbus0 [...] run0: MAC/BBP RT3070 (rev 0x0201), RF RT3020 (MIMO 1T1R), address XXX [...] run0: [HT] Enabling 802.11n [...] Root mount waiting for: usbus0 [...] ugen0.3: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/85.36, addr 2> on usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.4: <Logitech USB Receiver> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/24.11, addr 3> on usbus0 [...] kbd1 at ukbd0


Hardware for Linux and BSD

GitHub