[...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p7-HBSD #0 427d53bc125(stable/20.7)-dirty: Sun Jul 26 05:51:42 CEST 2020 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Celeron(R) CPU J3355 @ 2.00GHz (1996.87-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x506c9 Family=0x6 Model=0x5c Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features3=0x2c000000<IBPB,STIBP,ARCH_CAP> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x1<RDCL_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3918385152 (3736 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL EDK2 > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 1 [...] Timecounter "TSC" frequency 1996870740 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812507c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000052 [4335] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Event timer "HPET5" frequency 19200000 Hz quality 440 [...] Event timer "HPET6" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0x90000000-0x90ffffff,0x80000000-0x8fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0x91310000-0x91311fff,0x91314000-0x913140ff,0x91313000-0x913137ff at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0x91080000-0x910fffff,0x91104000-0x91107fff at device 0.0 on pci1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0x91000000-0x9107ffff,0x91100000-0x91103fff at device 0.1 on pci1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 19.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <Realtek PCIe GBE Family Controller> port 0xe000-0xe0ff mem 0x91204000-0x91204fff,0x91200000-0x91203fff at device 0.0 on pci2 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.95.00 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] xhci0: <Intel Apollo Lake USB 3.0 controller> mem 0x91300000-0x9130ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <ADATA SP900 5.2.5> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 61057MB (125045424 512 byte sectors) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 15 ports with 15 removable, self powered [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> on motherboard [...] pid 57469 (syslog-ng), jid 0, uid 0: exited on signal 11 (core dumped) [...] igb1: link state changed to DOWN [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] igb1: link state changed to DOWN [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] igb1: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pid 72042 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 23500 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 73679 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 17461 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 34855 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 79814 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 12204 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 78630 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 40819 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 9732 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 88980 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 92356 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 28264 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 15189 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 5926 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 61152 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 29519 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 79221 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 45036 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 11175 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 4726 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 79617 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 42492 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 27213 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 33733 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 96768 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 33842 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 94716 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 33676 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 7018 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 97652 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 68468 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 77495 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 44622 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pflog0: promiscuous mode disabled [...] pid 9954 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 5 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p12-HBSD #0 0857355c1c2(stable/20.7)-dirty: Mon Jan 18 18:12:55 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Celeron(R) CPU J3355 @ 2.00GHz (1996.87-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x506c9 Family=0x6 Model=0x5c Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features3=0x2c000000<IBPB,STIBP,ARCH_CAP> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x1<RDCL_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3916292096 (3734 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL EDK2 > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 1 [...] Timecounter "TSC" frequency 1996868428 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000052 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Event timer "HPET5" frequency 19200000 Hz quality 440 [...] Event timer "HPET6" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0x90000000-0x90ffffff,0x80000000-0x8fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0x91310000-0x91311fff,0x91314000-0x913140ff,0x91313000-0x913137ff at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0x91080000-0x910fffff,0x91104000-0x91107fff at device 0.0 on pci1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0x91000000-0x9107ffff,0x91100000-0x91103fff at device 0.1 on pci1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 19.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0x91204000-0x91204fff,0x91200000-0x91203fff at device 0.0 on pci2 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.96.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] xhci0: <Intel Apollo Lake USB 3.0 controller> mem 0x91300000-0x9130ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <ADATA SP900 5.2.5> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 61057MB (125045424 512 byte sectors) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 15 ports with 15 removable, self powered [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> on motherboard [...] igb1: link state changed to DOWN [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] igb1: link state changed to DOWN [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] igb1: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXX:XXX:XXX::XXX, nxt 58, rcvif igb1, outif igb0 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 58, rcvif igb1, outif igb0 [...] pflog0: promiscuous mode disabled [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 4 4 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p12-HBSD #0 0857355c1c2(stable/20.7)-dirty: Mon Jan 18 18:12:55 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Celeron(R) CPU J3355 @ 2.00GHz (1996.89-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x506c9 Family=0x6 Model=0x5c Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features3=0x2c000000<IBPB,STIBP,ARCH_CAP> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x1<RDCL_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3916292096 (3734 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL EDK2 > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 1 [...] Timecounter "TSC" frequency 1996889674 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000052 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Event timer "HPET5" frequency 19200000 Hz quality 440 [...] Event timer "HPET6" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0x90000000-0x90ffffff,0x80000000-0x8fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0x91310000-0x91311fff,0x91314000-0x913140ff,0x91313000-0x913137ff at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0x91080000-0x910fffff,0x91104000-0x91107fff at device 0.0 on pci1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0x91000000-0x9107ffff,0x91100000-0x91103fff at device 0.1 on pci1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 19.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0x91204000-0x91204fff,0x91200000-0x91203fff at device 0.0 on pci2 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.96.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] xhci0: <Intel Apollo Lake USB 3.0 controller> mem 0x91300000-0x9130ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <ADATA SP900 5.2.5> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 61057MB (125045424 512 byte sectors) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 15 ports with 15 removable, self powered [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> on motherboard [...] igb1: link state changed to DOWN [...] igb0: link state changed to DOWN [...] igb1: link state changed to UP [...] igb0: link state changed to UP [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] re0: link state changed to DOWN [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 58, rcvif igb1, outif igb0 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] pflog0: promiscuous mode disabled [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 58, rcvif igb1, outif igb0 [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 5 4 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 58, rcvif igb1, outif igb0 [...] 1 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] All buffers synced. [...] Uptime: 3h34m30s [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p12-HBSD #0 0857355c1c2(stable/20.7)-dirty: Mon Jan 18 18:12:55 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Celeron(R) CPU J3355 @ 2.00GHz (1996.89-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x506c9 Family=0x6 Model=0x5c Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features3=0x2c000000<IBPB,STIBP,ARCH_CAP> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x1<RDCL_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3916292096 (3734 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL EDK2 > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 1 [...] Timecounter "TSC" frequency 1996886194 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000052 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Event timer "HPET5" frequency 19200000 Hz quality 440 [...] Event timer "HPET6" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0x90000000-0x90ffffff,0x80000000-0x8fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0x91310000-0x91311fff,0x91314000-0x913140ff,0x91313000-0x913137ff at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0x91080000-0x910fffff,0x91104000-0x91107fff at device 0.0 on pci1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0x91000000-0x9107ffff,0x91100000-0x91103fff at device 0.1 on pci1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 19.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0x91204000-0x91204fff,0x91200000-0x91203fff at device 0.0 on pci2 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.96.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] xhci0: <Intel Apollo Lake USB 3.0 controller> mem 0x91300000-0x9130ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <ADATA SP900 5.2.5> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 61057MB (125045424 512 byte sectors) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 15 ports with 15 removable, self powered [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] igb1: link state changed to DOWN [...] igb0: link state changed to DOWN [...] re0: link state changed to DOWN [...] igb1: link state changed to UP [...] igb0: link state changed to UP [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] igb0: link state changed to DOWN [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] igb0: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 58, rcvif igb1, outif igb0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1