[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p8 GENERIC amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Celeron(R) CPU 540 @ 1.86GHz (1862.13-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x10661 Family=0x6 Model=0x16 Stepping=1 [...] Features=0xafebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> [...] Features2=0xe31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] TSC: P-state invariant, performance statistics [...] real memory = 2147483648 (2048 MB) [...] avail memory = 2037194752 (1942 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <DELL M08 > [...] random: unblocking device. [...] ioapic0: MADT APIC ID 1 != hw id 0 [...] ioapic0 <Version 2.0> irqs 0-23 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf7170-0xf718e [...] smbios0: Version: 2.4, BCD Revision: 2.4 [...] aesni0: No AES or SHA support. [...] acpi0: <DELL M08 > [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 2 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xeff8-0xefff mem 0xfea00000-0xfeafffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] agp0: <Intel GM965 SVGA controller> on vgapci0 [...] WARNING: Device "agp" is Giant locked and may be deleted before FreeBSD 14.0. [...] agp0: aperture size is 256M, detected 7676k stolen memory [...] vgapci0: Boot video device [...] vgapci1: <VGA-compatible display> mem 0xfeb00000-0xfebfffff at device 2.1 on pci0 [...] uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x6f20-0x6f3f irq 20 at device 26.0 on pci0 [...] uhci0: LegSup = 0x2f00 [...] usbus0 on uhci0 [...] uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x6f00-0x6f1f irq 21 at device 26.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus1 on uhci1 [...] ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xfed1c400-0xfed1c7ff irq 22 at device 26.7 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci0 [...] hdac0: <Intel 82801H HDA Controller> mem 0xfe9fc000-0xfe9fffff irq 21 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] mskc0: <Marvell Yukon 88E8040 Fast Ethernet> port 0xde00-0xdeff mem 0xfe8fc000-0xfe8fffff irq 16 at device 0.0 on pci1 [...] msk0: <Marvell Technology Group Ltd. Yukon FE+ Id 0xb8 Rev 0x00> on mskc0 [...] msk0: disabling jumbo frame support [...] msk0: Using defaults for TSO: 65518/35/2048 [...] msk0: Ethernet address: ... [...] miibus0: <MII bus> on msk0 [...] e1000phy0: <Marvell 88E3016 10/100 Fast Ethernet PHY> PHY 0 on miibus0 [...] e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow [...] pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xfe7ff000-0xfe7fffff irq 17 at device 0.0 on pci2 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.4 on pci0 [...] uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x6f80-0x6f9f irq 20 at device 29.0 on pci0 [...] uhci2: LegSup = 0x2f00 [...] usbus3 on uhci2 [...] uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x6f60-0x6f7f irq 21 at device 29.1 on pci0 [...] uhci3: LegSup = 0x2f00 [...] usbus4 on uhci3 [...] uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x6f40-0x6f5f irq 22 at device 29.2 on pci0 [...] uhci4: LegSup = 0x2f00 [...] usbus5 on uhci4 [...] ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xfed1c000-0xfed1c3ff irq 20 at device 29.7 on pci0 [...] usbus6: EHCI version 1.0 [...] usbus6 on ehci1 [...] pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib4 [...] pci3: <serial bus, FireWire> at device 9.0 (no driver attached) [...] sdhci_pci0: <RICOH R5C822 SD> irq 18 at device 9.1 on pci3 [...] sdhci_pci0: 1 slot(s) allocated [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x6fa0-0x6faf irq 16 at device 31.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] ahci0: <Intel ICH8M AHCI SATA controller> port 0x6eb0-0x6eb7,0x6eb8-0x6ebb,0x6ec0-0x6ec7,0x6ec8-0x6ecb,0x6ee0-0x6eff mem 0xfe9fb800-0xfe9fbfff irq 17 at device 31.2 on pci0 [...] ahci0: AHCI v1.10 with 3 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0. [...] psm0: model GlidePoint, device ID 0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcffff pnpid ORM0000 on isa0 [...] Timecounter "TSC" frequency 1861999310 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Conexant (0x2c06) HDA CODEC> at cad 0 on hdac0 [...] unknown: <Conexant (0x2c06) HDA CODEC Modem Function Group> at nid 2 on hdacc0 (no driver attached) [...] hdacc1: <Silicon Image SiI1392 HDA CODEC> at cad 1 on hdac0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] usbus2: 480Mbps High Speed USB v2.0 [...] hdaa0: <Silicon Image SiI1392 Audio Function Group> at nid 1 on hdacc1 [...] pcm0: <Silicon Image SiI1392 (HDMI 8ch)> at nid 3 on hdaa0 [...] hdacc2: <Sigmatel STAC9228X HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Sigmatel STAC9228X Audio Function Group> at nid 1 on hdacc2 [...] pcm1: <Sigmatel STAC9228X (Analog 2.0+HP/2.0)> at nid 13,10 and 14,19 on hdaa1 [...] pcm2: <Sigmatel STAC9228X (Front Analog Line-out)> at nid 15 on hdaa1 [...] pcm3: <Sigmatel STAC9228X (Digital)> at nid 33 on hdaa1 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] uhub1 on usbus1 [...] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub2 on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] usbus6: 480Mbps High Speed USB v2.0 [...] ugen6.1: <Intel EHCI root HUB> at usbus6 [...] uhub3 on usbus6 [...] uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 [...] ugen5.1: <Intel UHCI root HUB> at usbus5 [...] uhub4 on usbus5 [...] uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] ugen4.1: <Intel UHCI root HUB> at usbus4 [...] uhub5 on usbus4 [...] uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] ugen3.1: <Intel UHCI root HUB> at usbus3 [...] uhub6 on usbus3 [...] uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] Trying to mount root from ufs:/dev/ada0s3a [rw]... [...] ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 [...] ada0: <ADATA SU680 XD0R630B> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 488386MB (1000215216 512 byte sectors) [...] ses0: pass1,ada0 in 'Slot 00', SATA Slot: scbus1 target 0 [...] cd0 at ata0 bus 0 scbus0 target 0 lun 0 [...] cd0: <TSSTcorp DVD+-RW TS-L632H D300> Removable CD-ROM SCSI device [...] cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub6: 2 ports with 2 removable, self powered [...] uhub5: 2 ports with 2 removable, self powered [...] uhub4: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus2 usbus6 [...] uhub2: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus2 usbus6 [...] uhub3: 6 ports with 6 removable, self powered [...] ugen2.2: <vendor 0x05a9 product 0x2640> at usbus2 [...] Root mount waiting for: usbus6 [...] ugen4.2: <Logitech USB Receiver> at usbus4 [...] ukbd0 on uhub5 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 2> on usbus4 [...] kbd2 at ukbd0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device vendor 0x24a9 product 0x205a (0x24a9:0x205a) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device vendor 0x24a9 product 0x205a (0x24a9:0x205a) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device vendor 0x24a9 product 0x205a (0x24a9:0x205a) [...] ugen6.2: <vendor 0x24a9 product 0x205a> at usbus6 [...] umass0 on uhub3 [...] umass0: <vendor 0x24a9 product 0x205a, class 0/0, rev 2.10/2.00, addr 2> on usbus6 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:4:0: Attached to scbus4 [...] da0 at umass-sim0 bus 0 scbus4 target 0 lun 0 [...] da0: < > Removable Direct Access SPC-2 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 60400MB (123699200 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] [drm] Got stolen memory base 0x7f800000, size 0x800000 [...] lkpi_iic0: <LinuxKPI I2C> on drmn0 [...] iicbus0: <Philips I2C bus> on lkpi_iic0 [...] iic0: <I2C generic I/O> on iicbus0 [...] lkpi_iic1: <LinuxKPI I2C> on drmn0 [...] iicbus1: <Philips I2C bus> on lkpi_iic1 [...] iic1: <I2C generic I/O> on iicbus1 [...] lkpi_iic2: <LinuxKPI I2C> on drmn0 [...] iicbus2: <Philips I2C bus> on lkpi_iic2 [...] iic2: <I2C generic I/O> on iicbus2 [...] lkpi_iic3: <LinuxKPI I2C> on drmn0 [...] iicbus3: <Philips I2C bus> on lkpi_iic3 [...] iic3: <I2C generic I/O> on iicbus3 [...] lkpi_iic4: <LinuxKPI I2C> on drmn0 [...] iicbus4: <Philips I2C bus> on lkpi_iic4 [...] iic4: <I2C generic I/O> on iicbus4 [...] lkpi_iic5: <LinuxKPI I2C> on drmn0 [...] iicbus5: <Philips I2C bus> on lkpi_iic5 [...] iic5: <I2C generic I/O> on iicbus5 [...] lkpi_iic6: <LinuxKPI I2C> on drmn0 [...] iicbus6: <Philips I2C bus> on lkpi_iic6 [...] iic6: <I2C generic I/O> on iicbus6 [...] iic6: detached [...] iicbus6: detached [...] lkpi_iic6: detached [...] lkpi_iic6: <LinuxKPI I2C> on drmn0 [...] iicbus6: <Philips I2C bus> on lkpi_iic6 [...] iic6: <I2C generic I/O> on iicbus6 [...] iic6: detached [...] iicbus6: detached [...] lkpi_iic6: detached [...] drmn0: [drm] Initialized overlay support. [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] Initialized i915 1.6.0 20200917 for drmn0 on minor 0 [...] VT: Replacing driver "vga" with new "fb". [...] start FB_INFO: [...] type=11 height=800 width=1280 depth=32 [...] pbase=0xe0020000 vbase=0xfffff800e0020000 [...] name=drmn0 flags=0x0 stride=5120 bpp=32 [...] end FB_INFO [...] ichsmb0: <Intel 82801H (ICH8) SMBus controller> port 0x10c0-0x10df mem 0xfe9fb700-0xfe9fb7ff irq 17 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] wlan0: link state changed to UP [...] Cuse v0.1.37 @ /dev/cuse [...] ums0 on uhub5 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 2> on usbus4 [...] ums0: 16 buttons and [XYZT] coordinates ID=2