[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p7 stable/23.1-n250411-85724e9ce22 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Xeon(R) CPU X3450 @ 2.67GHz (2666.75-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x106e5 Family=0x6 Model=0x1e Stepping=5 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x98e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features3=0xc000000<IBPB,STIBP> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 6442450944 (6144 MB) [...] avail memory = 6147465216 (5862 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <INTEL S3420GPX> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 5 7 6 4 2 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf0440-0xf045e [...] smbios0: Version: 2.5, BCD Revision: 2.5 [...] aesni0: No AES or SHA support. [...] acpi0: <INTEL S3420GPX> [...] acpi0: Power Button (fixed) [...] Firmware Error (ACPI): AE_AML_BUFFER_LIMIT, Field [CPB3] at bit offset/length 64/32 exceeds size of target Buffer (64 bits) (20201113/dsopcode-356) [...] ACPI Error: Aborting method \134_SB._OSC due to previous error (AE_AML_BUFFER_LIMIT) (20201113/psparse-689) [...] acpi0: _OSC failed: AE_AML_BUFFER_LIMIT [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 2.0 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 3.0 on pci2 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> at device 4.0 on pci2 [...] pci5: <ACPI PCI bus> on pcib5 [...] em0: <Intel(R) 82578DM> port 0x3020-0x303f mem 0xf1d00000-0xf1d1ffff,0xf1d22000-0xf1d22fff irq 16 at device 25.0 on pci0 [...] em0: EEPROM V0.10-2 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xf1d21000-0xf1d213ff irq 21 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] em1: <Intel(R) Gigabit CT 82574L> port 0x2000-0x201f mem 0xf1c00000-0xf1c1ffff,0xf1c20000-0xf1c23fff irq 16 at device 0.0 on pci7 [...] em1: EEPROM V1.9-0 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib8: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] vgapci0: <VGA-compatible display> mem 0xf0000000-0xf0ffffff,0xf1800000-0xf1803fff,0xf1000000-0xf17fffff irq 17 at device 0.0 on pci8 [...] vgapci0: Boot video device [...] pcib9: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] mvs0: <Adaptec 1430SA SATA controller> port 0x1000-0x10ff mem 0xf1a00000-0xf1afffff,0xf1b00000-0xf1bfffff irq 19 at device 0.0 on pci9 [...] mvs0: Gen-IIe, 4 3Gbps ports, Port Multiplier supported with FBS [...] mvsch0: <Marvell SATA channel> at channel 0 on mvs0 [...] mvsch1: <Marvell SATA channel> at channel 1 on mvs0 [...] mvsch2: <Marvell SATA channel> at channel 2 on mvs0 [...] mvsch3: <Marvell SATA channel> at channel 3 on mvs0 [...] ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xf1d20000-0xf1d203ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib10: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] ral0: <Ralink Technology RT2561S> mem 0xf1900000-0xf1907fff irq 16 at device 0.0 on pci10 [...] ral0: MAC/BBP RT2561C, RF RT2527 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci0: <Intel Ibex Peak SATA300 controller> port 0x3098-0x309f,0x30ac-0x30af,0x3090-0x3097,0x30a8-0x30ab,0x3070-0x307f,0x3060-0x306f irq 18 at device 31.2 on pci0 [...] ata2: <ATA channel> at channel 0 on atapci0 [...] ata3: <ATA channel> at channel 1 on atapci0 [...] atapci1: <Intel Ibex Peak SATA300 controller> port 0x3088-0x308f,0x30a4-0x30a7,0x3080-0x3087,0x30a0-0x30a3,0x3050-0x305f,0x3040-0x304f irq 22 at device 31.5 on pci0 [...] ata4: <ATA channel> at channel 0 on atapci1 [...] ata5: <ATA channel> at channel 1 on atapci1 [...] acpi_button0: <Sleep Button> on acpi0 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1333317027 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] Root mount waiting for: usbus0 CAM usbus1 [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] ugen0.2: <vendor 0x8087 product 0x0020> at usbus0 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x0020> at usbus1 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] Root mount waiting for: usbus0 CAM usbus1 [...] uhub2: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] ugen1.3: <American Megatrends Inc. Virtual Keyboard and Mouse> at usbus1 [...] ukbd0 on uhub3 [...] ukbd0: <Keyboard Interface> on usbus1 [...] kbd2 at ukbd0 [...] Root mount waiting for: CAM usbus1 [...] ada0 at ata2 bus 0 scbus4 target 1 lun 0 [...] ada0: <WDC WD2500AAKX-75U6AA0 19.01H19> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] ada0: 238475MB (488397168 512 byte sectors) [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device USB Modem USB Modem (0x2fd4:0x9aff) [...] ugen1.4: <USB Modem USB Modem> at usbus1 [...] umass0 on uhub3 [...] umass0: <Mass Storage> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:8:0: Attached to scbus8 [...] Root mount waiting for: CAM [...] cd0 at umass-sim0 bus 0 scbus8 target 0 lun 0 [...] cd0: <USBModem Disk 2.31> Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: 23MB (11948 2048 byte sectors) [...] cd0: quirks=0x10<10_BYTE_ONLY>