[...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE-p4 GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz (3292.59-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x3d9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX,F16C> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8177766400 (7798 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 3 2 [...] Timecounter "TSC-low" frequency 1646293684 Hz quality 1000 [...] random: entropy device external interface [...] 000.000019 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff81114e40, 0) error 19 [...] kbd1 at kbdmux0 [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] aesni0: No AES or SHA support. [...] acpi0: <DELL CBX3 > on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xf7e08000-0xf7e083ff irq 16 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Cougar Point HDA Controller> mem 0xf7e00000-0xf7e03fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] iwm0: <Intel(R) Dual Band Wireless AC 8260> mem 0xf7d00000-0xf7d01fff irq 17 at device 0.0 on pci2 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xf7c00000-0xf7c00fff irq 18 at device 0.0 on pci3 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci0 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xf0004000-0xf0004fff,0xf0000000-0xf0003fff irq 16 at device 0.0 on pci4 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x2c800000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xf7e07000-0xf7e073ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7e06000-0xf7e067ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 4 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xce800-0xcf7ff,0xcf800-0xd07ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] hdacc0: <Conexant CX20641 HDA CODEC> at cad 2 on hdac0 [...] hdaa0: <Conexant CX20641 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Conexant CX20641 (Analog 4ch/2.0)> at nid 28,31 and 26 on hdaa0 [...] pcm1: <Conexant CX20641 (Analog)> at nid 25 and 29,27 on hdaa0 [...] hdacc1: <Intel Cougar Point HDA CODEC> at cad 3 on hdac0 [...] hdaa1: <Intel Cougar Point Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Cougar Point (HDMI/DP 8ch)> at nid 7 on hdaa1 [...] ugen1.1: <0x1106 XHCI root HUB> at usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] uhub0: <0x1106 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] iwm0: hw rev 0x200, fw ver 22.361476.0, address XXX [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 usbus1 usbus2 CAM [...] ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST33000651NS G009> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 2861588MB (5860533168 512 byte sectors) [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ada1 at ahcich4 bus 0 scbus1 target 0 lun 0 [...] ada1: <TOSHIBA THNSNJ256GCSY JYPA0101> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 244198MB (500118192 512 byte sectors) [...] ses0: pass1,ada1 in 'Slot 04', SATA Slot: scbus1 target 0 [...] uhub0: 5 ports with 4 removable, self powered [...] GEOM_ELI: Device ada0p3.eli created. [...] GEOM_ELI: Encryption: AES-XTS 256 [...] GEOM_ELI: Crypto: software [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] ugen1.2: <vendor 0x2109 USB2.0 Hub> at usbus1 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.10/4.20, addr 1> on usbus1 [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] uhub3: 4 ports with 4 removable, self powered [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub5 on uhub1 [...] uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] uhub4: 4 ports with 4 removable, self powered [...] uhub5: 6 ports with 6 removable, self powered [...] ugen2.3: <Generic Mass Storage Device> at usbus2 [...] umass0 on uhub5 [...] umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 3> on usbus2 [...] umass0: SCSI over Bulk-Only; quirks = 0x4001 [...] umass0:3:0: Attached to scbus3 [...] ugen1.3: <Western Digital My Book 25EE> at usbus1 [...] umass1 on uhub0 [...] umass1: <Western Digital My Book 25EE, class 0/0, rev 3.00/40.04, addr 2> on usbus1 [...] umass1: SCSI over Bulk-Only; quirks = 0x8000 [...] umass1:4:1: Attached to scbus4 [...] da1 at umass-sim1 bus 1 scbus4 target 0 lun 0 [...] da1: <WD My Book 25EE 4004> Fixed Direct Access SPC-4 SCSI device [...] da1: Serial Number... [...] da1: 400.000MB/s transfers [...] da1: 5723166MB (11721043968 512 byte sectors) [...] da1: quirks=0x2<NO_6_BYTE> [...] ses1 at umass-sim1 bus 1 scbus4 target 0 lun 1 [...] ses1: <WD SES Device 4004> Fixed Enclosure Services SPC-4 SCSI device [...] ses1: Serial Number... [...] ses1: 400.000MB/s transfers [...] ses1: SES Device [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <Generic- SD/MMC 1.00> Removable Direct Access SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] da2 at umass-sim0 bus 0 scbus3 target 0 lun 1 [...] da2: <Generic- Compact Flash 1.01> Removable Direct Access SCSI device [...] da2: Serial Number... [...] da2: 40.000MB/s transfers [...] da2: Attempt to query device size failed: NOT READY, Medium not present [...] da2: quirks=0x2<NO_6_BYTE> [...] da3 at umass-sim0 bus 0 scbus3 target 0 lun 2 [...] da3: <Generic- SM/xD-Picture 1.02> Removable Direct Access SCSI device [...] da3: Serial Number... [...] da3: 40.000MB/s transfers [...] da3: Attempt to query device size failed: NOT READY, Medium not present [...] da3: quirks=0x2<NO_6_BYTE> [...] da4 at umass-sim0 bus 0 scbus3 target 0 lun 3 [...] da4: <Generic- MS/MS-Pro 1.03> Removable Direct Access SCSI device [...] da4: Serial Number... [...] da4: 40.000MB/s transfers [...] da4: Attempt to query device size failed: NOT READY, Medium not present [...] da4: quirks=0x2<NO_6_BYTE> [...] ugen2.4: <vendor 0x1a40 USB 2.0 Hub> at usbus2 [...] uhub6 on uhub5 [...] uhub6: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 4> on usbus2 [...] ugen1.4: <ASIX Elec. AX88179> at usbus1 [...] uhub6: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus2 [...] ugen2.5: <vendor 0x17ef Lenovo Optical Mouse> at usbus2 [...] Root mount waiting for: usbus2 [...] ugen2.6: <Key Tronic Keytronic USB Keyboard> at usbus2 [...] ukbd0 on uhub6 [...] ukbd0: <icKeytronic USB Keyboard1234> on usbus2 [...] kbd2 at ukbd0 [...] GEOM_ELI: Device ada0p2.eli created. [...] GEOM_ELI: Encryption: AES-XTS 128 [...] GEOM_ELI: Crypto: software [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer [...] [drm] Got stolen memory base 0xdba00000, size 0x4000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector VGA-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.VGA-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Initialized i915 1.6.0 20171222 for drmn0 on minor 0 [...] VT: Replacing driver "vga" with new "fb". [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] cmsize=16 size=8294400 [...] pbase=0xe0061000 vbase=0xfffff800e0061000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: inteldrmfb frame buffer device [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] wlan0: link state changed to UP [...] re0: link state changed to UP [...] axge0 on uhub0 [...] axge0: <NetworkInterface> on usbus1 [...] ums0 on uhub6 [...] ums0: <vendor 0x17ef Lenovo Optical Mouse, class 0/0, rev 1.10/1.00, addr 5> on usbus2 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] miibus1: <MII bus> on axge0 [...] rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 3 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] ue0: <USB Ethernet> on axge0 [...] ue0: Ethernet address: ... [...] ue0: link state changed to DOWN [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] ue0: link state changed to UP [...] tun0: link state changed to UP [...] tun0: changing name to 'wg0' [...] tun1: link state changed to UP [...] tun1: changing name to 'wg1' [...] wg0: link state changed to DOWN [...] wg1: link state changed to DOWN [...] tun0: link state changed to UP [...] tun0: changing name to 'wg0' [...] tun1: link state changed to UP [...] tun1: changing name to 'wg1' [...] in6_purgeaddr: err=65, destination address delete failed [...] lo0: link state changed to DOWN [...] wlan0: link state changed to DOWN [...] in_scrubprefix: err=65, prefix delete failed [...] in_scrubprefix: err=65, prefix delete failed [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] ue0: link state changed to DOWN [...] wlan0: link state changed to UP [...] ue0: link state changed to UP [...] re0: link state changed to UP [...] in6_purgeaddr: err=65, destination address delete failed [...] lo0: link state changed to DOWN [...] wlan0: link state changed to DOWN [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] ue0: link state changed to DOWN [...] wlan0: link state changed to UP [...] ue0: link state changed to UP [...] re0: link state changed to UP [...] in6_purgeaddr: err=65, destination address delete failed [...] lo0: link state changed to DOWN [...] wlan0: link state changed to DOWN [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] wlan0: link state changed to UP [...] re0: link state changed to UP [...] in6_purgeaddr: err=65, destination address delete failed [...] lo0: link state changed to DOWN [...] wlan0: link state changed to DOWN [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] wlan0: link state changed to UP [...] re0: link state changed to UP [...] Limiting closed port RST response from 202 to 200 packets/sec [...] ugen2.6: <Key Tronic Keytronic USB Keyboard> at usbus2 (disconnected) [...] ukbd0: at uhub6, port 2, addr 6 (disconnected) [...] ukbd0: detached [...] Limiting closed port RST response from 206 to 200 packets/sec [...] ugen2.6: <Key Tronic Keytronic USB Keyboard> at usbus2 [...] ukbd0 on uhub6 [...] ukbd0: <icKeytronic USB Keyboard1234> on usbus2 [...] kbd2 at ukbd0 [...] Limiting closed port RST response from 259 to 200 packets/sec [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on wlan0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on wlan0 [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ugen2.6: <Key Tronic Keytronic USB Keyboard> at usbus2 (disconnected) [...] ukbd0: at uhub6, port 2, addr 6 (disconnected) [...] ukbd0: detached [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ugen2.6: <Key Tronic Keytronic USB Keyboard> at usbus2 [...] ukbd0 on uhub6 [...] ukbd0: <icKeytronic USB Keyboard1234> on usbus2 [...] kbd2 at ukbd0 [...] GEOM_ELI: Device ada1p1.eli created. [...] GEOM_ELI: Encryption: AES-XTS 128 [...] GEOM_ELI: Crypto: software [...] warning: total configured swap (17301504 pages) exceeds maximum recommended amount (8018616 pages). [...] warning: increase kern.maxswzone or reduce amount of swap. [...] GEOM_ELI: Device ada0p2.eli destroyed. [...] GEOM_ELI: Detached ada0p2.eli on last close. [...] ugen2.7: <Apple Inc. iPhone> at usbus2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ugen2.7: <Apple Inc. iPhone> at usbus2 (disconnected) [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ugen2.7: <Apple Inc. iPhone> at usbus2 [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] re0: link state changed to DOWN [...] wlan0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] wlan0: link state changed to UP [...] in_scrubprefix: err=51, old prefix delete failed [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] re0: link state changed to DOWN [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] re0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ugen2.7: <Apple Inc. iPhone> at usbus2 (disconnected) [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] iwm0: dumping device error log [...] iwm0: Start Error Log Dump: [...] iwm0: Status: 0x3, count: 6 [...] iwm0: 0x0000090A | ADVANCED_SYSASSERT [...] iwm0: 000002F0 | trm_hw_status0 [...] iwm0: 00000000 | trm_hw_status1 [...] iwm0: 0000E9C8 | branchlink2 [...] iwm0: 0002843C | interruptlink1 [...] iwm0: 00000000 | interruptlink2 [...] iwm0: 000000FF | data1 [...] iwm0: 00031A6C | data2 [...] iwm0: DEADBEEF | data3 [...] iwm0: 1C4064CE | beacon time [...] iwm0: 51855AE6 | tsf low [...] iwm0: 00000002 | tsf hi [...] iwm0: 00000000 | time gp1 [...] iwm0: E8743D44 | time gp2 [...] iwm0: 00000000 | uCode revision type [...] iwm0: 00000016 | uCode version major [...] iwm0: 00058404 | uCode version minor [...] iwm0: 00000201 | hw version [...] iwm0: 0000FF0F | board version [...] iwm0: 0046001C | hcmd [...] iwm0: 00022002 | isr0 [...] iwm0: 00000000 | isr1 [...] iwm0: 08001802 | isr2 [...] iwm0: 0041F8C1 | isr3 [...] iwm0: 00000000 | isr4 [...] iwm0: 00004110 | last cmd Id [...] iwm0: 00000000 | wait_event [...] iwm0: 0000DE5F | l2p_control [...] iwm0: 00000020 | l2p_duration [...] iwm0: 00000000 | l2p_mhvalid [...] iwm0: 000000A0 | l2p_addr_match [...] iwm0: 0000008F | lmpm_pmg_sel [...] iwm0: 03071928 | timestamp [...] iwm0: 0000A8B8 | flow_handler [...] iwm0: Start UMAC Error Log Dump: [...] iwm0: Status: 0x3, count: 7 [...] iwm0: 0x00000070 | ADVANCED_SYSASSERT [...] iwm0: 0x00000000 | umac branchlink1 [...] iwm0: 0xC008383C | umac branchlink2 [...] iwm0: 0xC008AEE6 | umac interruptlink1 [...] iwm0: 0xC008166C | umac interruptlink2 [...] iwm0: 0x00000800 | umac data1 [...] iwm0: 0xC008166C | umac data2 [...] iwm0: 0xDEADBEEF | umac data3 [...] iwm0: 0x00000016 | umac major [...] iwm0: 0x00058404 | umac minor [...] iwm0: 0xC0886280 | frame pointer [...] iwm0: 0xC0886280 | stack pointer [...] iwm0: 0x0978004E | last host cmd [...] iwm0: 0x00000000 | isr status reg [...] iwm0: driver status: [...] iwm0: tx ring 0: qid=0 cur=71 queued=1 [...] iwm0: tx ring 1: qid=1 cur=0 queued=0 [...] iwm0: tx ring 2: qid=2 cur=0 queued=0 [...] iwm0: tx ring 3: qid=3 cur=0 queued=0 [...] iwm0: tx ring 4: qid=4 cur=0 queued=0 [...] iwm0: tx ring 5: qid=5 cur=0 queued=0 [...] iwm0: tx ring 6: qid=6 cur=0 queued=0 [...] iwm0: tx ring 7: qid=7 cur=0 queued=0 [...] iwm0: tx ring 8: qid=8 cur=0 queued=0 [...] iwm0: tx ring 9: qid=9 cur=121 queued=0 [...] iwm0: tx ring 10: qid=10 cur=0 queued=0 [...] iwm0: tx ring 11: qid=11 cur=0 queued=0 [...] iwm0: tx ring 12: qid=12 cur=0 queued=0 [...] iwm0: tx ring 13: qid=13 cur=0 queued=0 [...] iwm0: tx ring 14: qid=14 cur=0 queued=0 [...] iwm0: tx ring 15: qid=15 cur=0 queued=0 [...] iwm0: tx ring 16: qid=16 cur=0 queued=0 [...] iwm0: tx ring 17: qid=17 cur=0 queued=0 [...] iwm0: tx ring 18: qid=18 cur=0 queued=0 [...] iwm0: tx ring 19: qid=19 cur=0 queued=0 [...] iwm0: tx ring 20: qid=20 cur=0 queued=0 [...] iwm0: tx ring 21: qid=21 cur=0 queued=0 [...] iwm0: tx ring 22: qid=22 cur=0 queued=0 [...] iwm0: tx ring 23: qid=23 cur=0 queued=0 [...] iwm0: tx ring 24: qid=24 cur=0 queued=0 [...] iwm0: tx ring 25: qid=25 cur=0 queued=0 [...] iwm0: tx ring 26: qid=26 cur=0 queued=0 [...] iwm0: tx ring 27: qid=27 cur=0 queued=0 [...] iwm0: tx ring 28: qid=28 cur=0 queued=0 [...] iwm0: tx ring 29: qid=29 cur=0 queued=0 [...] iwm0: tx ring 30: qid=30 cur=0 queued=0 [...] iwm0: rx ring: cur=174 [...] iwm0: 802.11 state 5 [...] iwm0: iwm_intr: controller panicked, iv_state = 5; restarting [...] wlan0: link state changed to DOWN [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] wlan0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] re0: link state changed to DOWN [...] wlan0: link state changed to DOWN [...] re0: link state changed to UP [...] wlan0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] ugen1.3: <Western Digital My Book 25EE> at usbus1 (disconnected) [...] umass1: at uhub0, port 2, addr 2 (disconnected) [...] da1 at umass-sim1 bus 1 scbus4 target 0 lun 0 [...] da1: <WD My Book 25EE 4004> s/n ... detached [...] ses1 at umass-sim1 bus 1 scbus4 target 0 lun 1 [...] ses1: <WD SES Device 4004> s/n ... detached [...] (ses1:umass-sim1:1:0:1): Periph destroyed [...] (da1:umass-sim1:1:0:0): Periph destroyed [...] umass1: detached [...] ugen1.3: <Western Digital My Book 25EE> at usbus1 [...] umass1 on uhub0 [...] umass1: <Western Digital My Book 25EE, class 0/0, rev 3.00/40.04, addr 2> on usbus1 [...] umass1: SCSI over Bulk-Only; quirks = 0xc001 [...] umass1:4:1: Attached to scbus4 [...] da1 at umass-sim1 bus 1 scbus4 target 0 lun 0 [...] da1: <WD My Book 25EE 4004> Fixed Direct Access SPC-4 SCSI device [...] da1: Serial Number... [...] da1: 400.000MB/s transfers [...] da1: 5723166MB (11721043968 512 byte sectors) [...] da1: quirks=0x2<NO_6_BYTE> [...] ses1 at umass-sim1 bus 1 scbus4 target 0 lun 1 [...] ses1: <WD SES Device 4004> Fixed Enclosure Services SPC-4 SCSI device [...] ses1: Serial Number... [...] ses1: 400.000MB/s transfers [...] ses1: SES Device [...] ugen1.3: <Western Digital My Book 25EE> at usbus1 (disconnected) [...] umass1: at uhub0, port 2, addr 2 (disconnected) [...] da1 at umass-sim1 bus 1 scbus4 target 0 lun 0 [...] da1: <WD My Book 25EE 4004> s/n ... detached [...] ses1 at umass-sim1 bus 1 scbus4 target 0 lun 1 [...] ses1: <WD SES Device 4004> s/n ... detached [...] (ses1:umass-sim1:1:0:1): Periph destroyed [...] (da1:umass-sim1:1:0:0): Periph destroyed [...] umass1: detached [...] ugen1.3: <Western Digital My Book 25EE> at usbus1 [...] umass1 on uhub0 [...] umass1: <Western Digital My Book 25EE, class 0/0, rev 3.00/40.04, addr 2> on usbus1 [...] umass1: SCSI over Bulk-Only; quirks = 0xc001 [...] umass1:4:1: Attached to scbus4 [...] da1 at umass-sim1 bus 1 scbus4 target 0 lun 0 [...] da1: <WD My Book 25EE 4004> Fixed Direct Access SPC-4 SCSI device [...] da1: Serial Number... [...] da1: 400.000MB/s transfers [...] da1: 5723166MB (11721043968 512 byte sectors) [...] da1: quirks=0x2<NO_6_BYTE> [...] ses1 at umass-sim1 bus 1 scbus4 target 0 lun 1 [...] ses1: <WD SES Device 4004> Fixed Enclosure Services SPC-4 SCSI device [...] ses1: Serial Number... [...] ses1: 400.000MB/s transfers [...] ses1: SES Device [...] ugen1.5: <vendor 0x1a40 USB 2.0 Hub> at usbus1 [...] uhub7 on uhub3 [...] uhub7: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 4> on usbus1 [...] uhub7: 4 ports with 4 removable, self powered [...] usb_alloc_device: set address 6 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] ugen1.6: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] usb_alloc_device: set address 6 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] ugen1.6: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] usb_alloc_device: set address 6 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] ugen1.6: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] usb_alloc_device: set address 6 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] ugen1.6: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] usb_alloc_device: set address 6 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] ugen1.6: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] usb_alloc_device: set address 6 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] ugen1.6: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] usb_alloc_device: set address 6 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] ugen1.6: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] usb_alloc_device: set address 6 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] ugen1.6: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] usb_alloc_device: set address 6 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] ugen1.6: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] usb_alloc_device: set address 6 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] ugen1.6: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] usb_alloc_device: set address 6 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] ugen1.6: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] usb_alloc_device: set address 6 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] ugen1.6: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] usb_alloc_device: set address 6 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] ugen1.6: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] usb_alloc_device: set address 6 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] ugen1.6: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] usb_alloc_device: set address 6 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] ugen1.6: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] usb_alloc_device: set address 6 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] ugen1.6: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] usb_alloc_device: set address 6 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] ugen1.6: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] usb_alloc_device: set address 6 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] ugen1.6: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] usb_alloc_device: set address 6 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] ugen1.6: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] usb_alloc_device: set address 6 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] ugen1.6: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] usb_alloc_device: set address 6 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] ugen1.6: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] usb_alloc_device: set address 6 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] ugen1.6: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] usb_alloc_device: set address 6 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] ugen1.6: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] usb_alloc_device: set address 6 failed (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_STALLED [...] ugen1.6: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] ugen1.5: <vendor 0x1a40 USB 2.0 Hub> at usbus1 (disconnected) [...] uhub7: at uhub3, port 2, addr 4 (disconnected) [...] uhub7: detached [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ugen1.3: <Western Digital My Book 25EE> at usbus1 (disconnected) [...] umass1: at uhub0, port 2, addr 2 (disconnected) [...] da1 at umass-sim1 bus 1 scbus4 target 0 lun 0 [...] da1: <WD My Book 25EE 4004> s/n ... detached [...] ses1 at umass-sim1 bus 1 scbus4 target 0 lun 1 [...] ses1: <WD SES Device 4004> s/n ... detached [...] (ses1:umass-sim1:1:0:1): Periph destroyed [...] (da1:umass-sim1:1:0:0): Periph destroyed [...] umass1: detached [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ugen2.7: <Apple Inc. iPhone> at usbus2 [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] wg0: link state changed to DOWN [...] wg1: link state changed to DOWN [...] tun0: link state changed to UP [...] tun0: changing name to 'wg0' [...] tun1: link state changed to UP [...] tun1: changing name to 'wg1' [...] ugen2.7: <Apple Inc. iPhone> at usbus2 (disconnected) [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ugen2.5: <vendor 0x17ef Lenovo Optical Mouse> at usbus2 (disconnected) [...] ums0: at uhub6, port 1, addr 5 (disconnected) [...] ums0: detached [...] ugen2.5: <vendor 0x17ef Lenovo Optical Mouse> at usbus2 [...] ums0 on uhub6 [...] ums0: <vendor 0x17ef Lenovo Optical Mouse, class 0/0, rev 1.10/1.00, addr 5> on usbus2 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ugen1.3: <Seagate BUP Slim BK> at usbus1 [...] umass1 on uhub0 [...] umass1: <Seagate BUP Slim BK, class 0/0, rev 3.00/1.00, addr 2> on usbus1 [...] umass1: SCSI over Bulk-Only; quirks = 0xc101 [...] umass1:4:1: Attached to scbus4 [...] da1 at umass-sim1 bus 1 scbus4 target 0 lun 0 [...] da1: <Seagate BUP Slim BK 0304> Fixed Direct Access SPC-4 SCSI device [...] da1: Serial Number... [...] da1: 400.000MB/s transfers [...] da1: 1907729MB (3907029167 512 byte sectors) [...] da1: quirks=0x2<NO_6_BYTE> [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] iwm0: dumping device error log [...] iwm0: Start Error Log Dump: [...] iwm0: Status: 0x3, count: 6 [...] iwm0: 0x0000090A | ADVANCED_SYSASSERT [...] iwm0: 000002F0 | trm_hw_status0 [...] iwm0: 00000000 | trm_hw_status1 [...] iwm0: 0000E9C8 | branchlink2 [...] iwm0: 0002843C | interruptlink1 [...] iwm0: 00000000 | interruptlink2 [...] iwm0: 000000FF | data1 [...] iwm0: 00031A6C | data2 [...] iwm0: DEADBEEF | data3 [...] iwm0: 9A004A68 | beacon time [...] iwm0: 39545542 | tsf low [...] iwm0: 00000018 | tsf hi [...] iwm0: 00000000 | time gp1 [...] iwm0: 99CA4AD9 | time gp2 [...] iwm0: 00000000 | uCode revision type [...] iwm0: 00000016 | uCode version major [...] iwm0: 00058404 | uCode version minor [...] iwm0: 00000201 | hw version [...] iwm0: 0000FF0F | board version [...] iwm0: 00FE001C | hcmd [...] iwm0: 00022002 | isr0 [...] iwm0: 00000000 | isr1 [...] iwm0: 08001802 | isr2 [...] iwm0: 004038C1 | isr3 [...] iwm0: 00000000 | isr4 [...] iwm0: 00004110 | last cmd Id [...] iwm0: 00000000 | wait_event [...] iwm0: 0000DA5F | l2p_control [...] iwm0: 00000020 | l2p_duration [...] iwm0: 00000000 | l2p_mhvalid [...] iwm0: 000000A0 | l2p_addr_match [...] iwm0: 0000008F | lmpm_pmg_sel [...] iwm0: 03071928 | timestamp [...] iwm0: 00008090 | flow_handler [...] iwm0: Start UMAC Error Log Dump: [...] iwm0: Status: 0x3, count: 7 [...] iwm0: 0x00000070 | ADVANCED_SYSASSERT [...] iwm0: 0x00000000 | umac branchlink1 [...] iwm0: 0xC008383C | umac branchlink2 [...] iwm0: 0xC008AEE6 | umac interruptlink1 [...] iwm0: 0xC008166C | umac interruptlink2 [...] iwm0: 0x00000800 | umac data1 [...] iwm0: 0xC008166C | umac data2 [...] iwm0: 0xDEADBEEF | umac data3 [...] iwm0: 0x00000016 | umac major [...] iwm0: 0x00058404 | umac minor [...] iwm0: 0xC0886280 | frame pointer [...] iwm0: 0xC0886280 | stack pointer [...] iwm0: 0x09FE004E | last host cmd [...] iwm0: 0x00000000 | isr status reg [...] iwm0: driver status: [...] iwm0: tx ring 0: qid=0 cur=255 queued=1 [...] iwm0: tx ring 1: qid=1 cur=0 queued=0 [...] iwm0: tx ring 2: qid=2 cur=0 queued=0 [...] iwm0: tx ring 3: qid=3 cur=0 queued=0 [...] iwm0: tx ring 4: qid=4 cur=0 queued=0 [...] iwm0: tx ring 5: qid=5 cur=0 queued=0 [...] iwm0: tx ring 6: qid=6 cur=0 queued=0 [...] iwm0: tx ring 7: qid=7 cur=0 queued=0 [...] iwm0: tx ring 8: qid=8 cur=0 queued=0 [...] iwm0: tx ring 9: qid=9 cur=255 queued=0 [...] iwm0: tx ring 10: qid=10 cur=0 queued=0 [...] iwm0: tx ring 11: qid=11 cur=0 queued=0 [...] iwm0: tx ring 12: qid=12 cur=0 queued=0 [...] iwm0: tx ring 13: qid=13 cur=0 queued=0 [...] iwm0: tx ring 14: qid=14 cur=0 queued=0 [...] iwm0: tx ring 15: qid=15 cur=0 queued=0 [...] iwm0: tx ring 16: qid=16 cur=0 queued=0 [...] iwm0: tx ring 17: qid=17 cur=0 queued=0 [...] iwm0: tx ring 18: qid=18 cur=0 queued=0 [...] iwm0: tx ring 19: qid=19 cur=0 queued=0 [...] iwm0: tx ring 20: qid=20 cur=0 queued=0 [...] iwm0: tx ring 21: qid=21 cur=0 queued=0 [...] iwm0: tx ring 22: qid=22 cur=0 queued=0 [...] iwm0: tx ring 23: qid=23 cur=0 queued=0 [...] iwm0: tx ring 24: qid=24 cur=0 queued=0 [...] iwm0: tx ring 25: qid=25 cur=0 queued=0 [...] iwm0: tx ring 26: qid=26 cur=0 queued=0 [...] iwm0: tx ring 27: qid=27 cur=0 queued=0 [...] iwm0: tx ring 28: qid=28 cur=0 queued=0 [...] iwm0: tx ring 29: qid=29 cur=0 queued=0 [...] iwm0: tx ring 30: qid=30 cur=0 queued=0 [...] iwm0: rx ring: cur=135 [...] iwm0: 802.11 state 5 [...] iwm0: iwm_intr: controller panicked, iv_state = 5; restarting [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] re0: link state changed to DOWN [...] wlan0: link state changed to DOWN [...] re0: link state changed to UP [...] wlan0: link state changed to UP [...] re0: link state changed to DOWN [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] re0: link state changed to UP [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] re0: link state changed to DOWN [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] re0: link state changed to UP [...] re0: link state changed to DOWN [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] re0: link state changed to UP [...] re0: link state changed to DOWN [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] re0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on wlan0 [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on wlan0 [...] ugen2.7: <Apple Inc. iPhone> at usbus2 [...] ugen2.7: <Apple Inc. iPhone> at usbus2 (disconnected) [...] ugen2.5: <vendor 0x17ef Lenovo Optical Mouse> at usbus2 (disconnected) [...] ums0: at uhub6, port 1, addr 5 (disconnected) [...] ums0: detached [...] ugen2.5: <vendor 0x17ef Lenovo Optical Mouse> at usbus2 [...] ums0 on uhub6 [...] ums0: <vendor 0x17ef Lenovo Optical Mouse, class 0/0, rev 1.10/1.00, addr 5> on usbus2 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] ugen2.7: <Apple Inc. iPhone> at usbus2 [...] ue0: link state changed to DOWN [...] pid 49017 (conftest), jid 9, uid 0: exited on signal 11 (core dumped) [...] pid 98518 (conftest), jid 9, uid 0: exited on signal 11 (core dumped) [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] ugen2.5: <vendor 0x17ef Lenovo Optical Mouse> at usbus2 (disconnected) [...] ums0: at uhub6, port 1, addr 5 (disconnected) [...] ums0: detached [...] ugen2.5: <vendor 0x17ef Lenovo Optical Mouse> at usbus2 [...] ums0 on uhub6 [...] ums0: <vendor 0x17ef Lenovo Optical Mouse, class 0/0, rev 1.10/1.00, addr 5> on usbus2 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] pid 57053 (conftest), jid 13, uid 0: exited on signal 11 (core dumped) [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on wlan0 [...] pid 52478 (conftest), jid 11, uid 0: exited on signal 11 (core dumped) [...] nfsrv_cache_session: no session IPaddr=XXX.XXX.XXX.XXX [...] ugen2.7: <Apple Inc. iPhone> at usbus2 (disconnected) [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on wlan0 [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] (da1:umass-sim1:1:0:0): READ(10). CDB: 28 00 42 e5 72 02 00 01 00 00 [...] (da1:umass-sim1:1:0:0): CAM status: CCB request completed with an error [...] (da1:umass-sim1:1:0:0): Retrying command, 3 more tries remain [...] (da1:umass-sim1:1:0:0): READ(10). CDB: 28 00 42 e5 72 02 00 01 00 00 [...] (da1:umass-sim1:1:0:0): CAM status: CCB request completed with an error [...] (da1:umass-sim1:1:0:0): Retrying command, 2 more tries remain [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ugen1.3: <Seagate BUP Slim BK> at usbus1 (disconnected) [...] umass1: at uhub0, port 2, addr 2 (disconnected) [...] da1 at umass-sim1 bus 1 scbus4 target 0 lun 0 [...] da1: <Seagate BUP Slim BK 0304> s/n ... detached [...] (da1:umass-sim1:1:0:0): Periph destroyed [...] umass1: detached [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on wlan0 [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on wlan0 [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on wlan0 [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ugen2.7: <Apple Inc. iPhone> at usbus2 [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] Limiting closed port RST response from 244 to 200 packets/sec [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] ugen2.7: <Apple Inc. iPhone> at usbus2 (disconnected) [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on wlan0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on wlan0 [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on wlan0 [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on wlan0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on wlan0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on wlan0 [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] ue0: link state changed to UP [...] ue0: link state changed to DOWN [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0