[...] pcm1: <Realtek ALC255 (Rear Analog Line-out)> at nid 27 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: pass0,cd0 in 'Slot 02', SATA Slot: scbus2 target 0 [...] cd0 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] cd0: <HL-DT-ST DVD+-RW GU90N A1C3> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0 on usbus0 [...] WARNING: /mnt was not properly dismounted [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub0: 26 ports with 26 removable, self powered [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_GPE.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: cannot find EC device [...] acpi_wmi2: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi3: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi3: cannot find EC device [...] acpi_wmi3: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi4: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi4: cannot find EC device [...] acpi_wmi4: Embedded MOF found [...] ACPI: \134_SB.AMW4.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi5: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi5: cannot find EC device [...] acpi_wmi5: Embedded MOF found [...] ACPI: \134_SB.AMW2.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] pchtherm0: <CannonLake-H Thermal Subsystem> mem 0xd193e000-0xd193efff at device 18.0 on pci0 [...] ig4iic0: <Intel Cannon Lake-H I2C Controller-0> at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] iicbus0: <unknown card> at addr 0x8 [...] ichsmb0: <Intel Cannon Lake SMBus controller> port 0xefa0-0xefbf mem 0xd1938000-0xd19380ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] igb2: link state changed to DOWN [...] vlan0: changing name to 'igb2_vlan187' [...] vlan1: changing name to 'igb2_vlan69' [...] vlan2: changing name to 'igb2_vlan81' [...] igb3: link state changed to DOWN [...] igb0: link state changed to DOWN [...] igb2: link state changed to UP [...] igb2_vlan187: link state changed to UP [...] igb2_vlan69: link state changed to UP [...] igb2_vlan81: link state changed to UP [...] igb3: link state changed to UP [...] igb0: link state changed to UP [...] tun1: changing name to 'ovpnc1' [...] tun2: changing name to 'ovpnc2' [...] tun3: changing name to 'ovpnc3' [...] wg0: link state changed to UP [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ovpnc3: link state changed to UP [...] ovpnc1: link state changed to UP [...] wg0: link state changed to DOWN [...] ovpnc1: link state changed to DOWN [...] ovpnc3: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 5 0 0 done [...] All buffers synced. [...] Uptime: 58m10s [...] uhub0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p5 stable/23.1-n250372-c4ad069e50a SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i5-8500 CPU @ 3.00GHz (3000.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0x9c002600<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16407384064 (15647 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 2 3 1 5 4 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf0000-0xf001e [...] smbios0: Version: 3.1, BCD Revision: 3.1 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL CBX3 > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I350 (Copper)> mem 0xd1400000-0xd14fffff,0xd170c000-0xd170ffff at device 0.0 on pci1 [...] igb0: EEPROM V1.67-0 Option ROM V15-b0-p27 eTrack 0x80000ba6 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 6 RX queues 6 TX queues [...] igb0: Using MSI-X interrupts with 7 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0xd1300000-0xd13fffff,0xd1708000-0xd170bfff at device 0.1 on pci1 [...] igb1: EEPROM V1.67-0 Option ROM V15-b0-p27 eTrack 0x80000ba6 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 6 RX queues 6 TX queues [...] igb1: Using MSI-X interrupts with 7 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0xd1200000-0xd12fffff,0xd1704000-0xd1707fff at device 0.2 on pci1 [...] igb2: EEPROM V1.67-0 Option ROM V15-b0-p27 eTrack 0x80000ba6 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 6 RX queues 6 TX queues [...] igb2: Using MSI-X interrupts with 7 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0xd1100000-0xd11fffff,0xd1700000-0xd1703fff at device 0.3 on pci1 [...] igb3: EEPROM V1.67-0 Option ROM V15-b0-p27 eTrack 0x80000ba6 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 6 RX queues 6 TX queues [...] igb3: Using MSI-X interrupts with 7 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 6/1024, RX 6/1024 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xd0000000-0xd0ffffff,0xc0000000-0xcfffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0xd1920000-0xd192ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0xd1934000-0xd1935fff,0xd193a000-0xd193a0ff,0xd1939000-0xd19397ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib2: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme0: <Generic NVMe Device> mem 0xd1800000-0xd1803fff at device 0.0 on pci2 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Coffee Lake HDA Controller> mem 0xd1930000-0xd1933fff,0xd1000000-0xd10fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] em0: <Intel(R) I219-V CNP(7)> mem 0xd1900000-0xd191ffff at device 31.6 on pci0 [...] em0: EEPROM V0.5-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] acpi_syscontainer0: <System Container> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] Timecounter "TSC-low" frequency 1499990159 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] nvme0: Allocated 38MB host memory buffer [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] nvd0: <KBG30ZMS256G NVMe TOSHIBA 256GB> NVMe namespace [...] nvd0: 244198MB (500118192 512 byte sectors) [...] hdacc0: <Realtek ALC255 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC255 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC255 (Analog 2.0+HP)> at nid 20,33 on hdaa0 [...] pcm1: <Realtek ALC255 (Rear Analog Line-out)> at nid 27 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] cd0 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] cd0: <HL-DT-ST DVD+-RW GU90N A1C3> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] ses0: pass0,cd0 in 'Slot 02', SATA Slot: scbus2 target 0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub0: 26 ports with 26 removable, self powered [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_GPE.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: cannot find EC device [...] acpi_wmi2: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi3: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi3: cannot find EC device [...] acpi_wmi3: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi4: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi4: cannot find EC device [...] acpi_wmi4: Embedded MOF found [...] ACPI: \134_SB.AMW4.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi5: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi5: cannot find EC device [...] acpi_wmi5: Embedded MOF found [...] ACPI: \134_SB.AMW2.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] pchtherm0: <CannonLake-H Thermal Subsystem> mem 0xd193e000-0xd193efff at device 18.0 on pci0 [...] ig4iic0: <Intel Cannon Lake-H I2C Controller-0> at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] iicbus0: <unknown card> at addr 0x8 [...] ichsmb0: <Intel Cannon Lake SMBus controller> port 0xefa0-0xefbf mem 0xd1938000-0xd19380ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] igb2: link state changed to DOWN [...] vlan0: changing name to 'igb2_vlan187' [...] vlan1: changing name to 'igb2_vlan69' [...] vlan2: changing name to 'igb2_vlan81' [...] igb3: link state changed to DOWN [...] igb3: link state changed to UP [...] igb0: link state changed to UP [...] igb2: link state changed to UP [...] igb2_vlan187: link state changed to UP [...] igb2_vlan69: link state changed to UP [...] igb2_vlan81: link state changed to UP [...] tun1: changing name to 'ovpnc1' [...] tun2: changing name to 'ovpnc2' [...] tun3: changing name to 'ovpnc3' [...] wg0: link state changed to UP [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ovpnc1: link state changed to UP [...] ovpnc3: link state changed to UP [...] ovpnc2: link state changed to UP [...] wg0: link state changed to DOWN [...] ovpnc3: link state changed to DOWN [...] ovpnc2: link state changed to DOWN [...] ovpnc1: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 7 fsync: giving up on dirty (error = 35) 0xfffff80001f52d58: type VCHR [...] usecount 1, writecount 0, refcount 825 seqc users 0 rdev 0xfffff80002081800 [...] hold count flags () [...] flags () [...] v_object 0xfffff800010f9b58 ref 0 pages 12275 cleanbuf 822 dirtybuf 1 [...] lock type mntfs: EXCL by thread 0xfffffe00dd5ac560 (pid 19, syncer, tid 100125) [...] 5 0 0 done [...] All buffers synced. [...] Uptime: 6m1s [...] uhub0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p7 stable/23.1-n250403-22166c9a507 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i5-8500 CPU @ 3.00GHz (3000.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0x9c002600<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16407384064 (15647 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 2 4 1 5 3 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf0000-0xf001e [...] smbios0: Version: 3.1, BCD Revision: 3.1 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL CBX3 > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I350 (Copper)> mem 0xd1400000-0xd14fffff,0xd170c000-0xd170ffff at device 0.0 on pci1 [...] igb0: EEPROM V1.67-0 Option ROM V15-b0-p27 eTrack 0x80000ba6 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 6 RX queues 6 TX queues [...] igb0: Using MSI-X interrupts with 7 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0xd1300000-0xd13fffff,0xd1708000-0xd170bfff at device 0.1 on pci1 [...] igb1: EEPROM V1.67-0 Option ROM V15-b0-p27 eTrack 0x80000ba6 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 6 RX queues 6 TX queues [...] igb1: Using MSI-X interrupts with 7 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0xd1200000-0xd12fffff,0xd1704000-0xd1707fff at device 0.2 on pci1 [...] igb2: EEPROM V1.67-0 Option ROM V15-b0-p27 eTrack 0x80000ba6 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 6 RX queues 6 TX queues [...] igb2: Using MSI-X interrupts with 7 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0xd1100000-0xd11fffff,0xd1700000-0xd1703fff at device 0.3 on pci1 [...] igb3: EEPROM V1.67-0 Option ROM V15-b0-p27 eTrack 0x80000ba6 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 6 RX queues 6 TX queues [...] igb3: Using MSI-X interrupts with 7 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 6/1024, RX 6/1024 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xd0000000-0xd0ffffff,0xc0000000-0xcfffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0xd1920000-0xd192ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0xd1934000-0xd1935fff,0xd193a000-0xd193a0ff,0xd1939000-0xd19397ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib2: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme0: <Generic NVMe Device> mem 0xd1800000-0xd1803fff at device 0.0 on pci2 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Coffee Lake HDA Controller> mem 0xd1930000-0xd1933fff,0xd1000000-0xd10fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] em0: <Intel(R) I219-V CNP(7)> mem 0xd1900000-0xd191ffff at device 31.6 on pci0 [...] em0: EEPROM V0.5-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] acpi_syscontainer0: <System Container> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] Timecounter "TSC-low" frequency 1499989956 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] nvme0: Allocated 38MB host memory buffer [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] nvd0: <KBG30ZMS256G NVMe TOSHIBA 256GB> NVMe namespace [...] nvd0: 244198MB (500118192 512 byte sectors) [...] hdacc0: <Realtek ALC255 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC255 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC255 (Analog 2.0+HP)> at nid 20,33 on hdaa0 [...] pcm1: <Realtek ALC255 (Rear Analog Line-out)> at nid 27 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] cd0 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] cd0: <HL-DT-ST DVD+-RW GU90N A1C3> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] ses0: pass0,cd0 in 'Slot 02', SATA Slot: scbus2 target 0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub0: 26 ports with 26 removable, self powered [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_GPE.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: cannot find EC device [...] acpi_wmi2: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi3: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi3: cannot find EC device [...] acpi_wmi3: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi4: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi4: cannot find EC device [...] acpi_wmi4: Embedded MOF found [...] ACPI: \134_SB.AMW4.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi5: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi5: cannot find EC device [...] acpi_wmi5: Embedded MOF found [...] ACPI: \134_SB.AMW2.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] pchtherm0: <CannonLake-H Thermal Subsystem> mem 0xd193e000-0xd193efff at device 18.0 on pci0 [...] ig4iic0: <Intel Cannon Lake-H I2C Controller-0> at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] iicbus0: <unknown card> at addr 0x8 [...] ichsmb0: <Intel Cannon Lake SMBus controller> port 0xefa0-0xefbf mem 0xd1938000-0xd19380ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] igb2: link state changed to DOWN [...] vlan0: changing name to 'igb2_vlan187' [...] vlan1: changing name to 'igb2_vlan69' [...] vlan2: changing name to 'igb2_vlan81' [...] igb3: link state changed to DOWN [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb2: link state changed to UP [...] igb2_vlan187: link state changed to UP [...] igb2_vlan69: link state changed to UP [...] igb2_vlan81: link state changed to UP [...] igb3: link state changed to UP [...] igb0: link state changed to UP [...] tun1: changing name to 'ovpnc1' [...] tun2: changing name to 'ovpnc2' [...] tun3: changing name to 'ovpnc3' [...] wg0: link state changed to UP [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ovpnc1: link state changed to UP [...] ovpnc2: link state changed to UP [...] ovpnc3: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] ovpnc3: link state changed to DOWN [...] ovpnc3: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpnc3: link state changed to DOWN [...] ovpnc3: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpnc1: link state changed to DOWN [...] ovpnc1: link state changed to UP [...] ovpnc1: link state changed to DOWN [...] ovpnc1: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] ovpnc3: link state changed to DOWN [...] ovpnc1: link state changed to DOWN [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] wg0: link state changed to DOWN [...] ovpnc2: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 8 0 [...] igb0: link state changed to UP [...] 0 done [...] All buffers synced. [...] Uptime: 10d20h31m45s [...] uhub0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p7 stable/23.1-n250403-22166c9a507 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i5-8500 CPU @ 3.00GHz (3000.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0x9c002600<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16407384064 (15647 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 5 2 1 3 4 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf0000-0xf001e [...] smbios0: Version: 3.1, BCD Revision: 3.1 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL CBX3 > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I350 (Copper)> mem 0xd1400000-0xd14fffff,0xd170c000-0xd170ffff at device 0.0 on pci1 [...] igb0: EEPROM V1.67-0 Option ROM V15-b0-p27 eTrack 0x80000ba6 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 6 RX queues 6 TX queues [...] igb0: Using MSI-X interrupts with 7 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0xd1300000-0xd13fffff,0xd1708000-0xd170bfff at device 0.1 on pci1 [...] igb1: EEPROM V1.67-0 Option ROM V15-b0-p27 eTrack 0x80000ba6 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 6 RX queues 6 TX queues [...] igb1: Using MSI-X interrupts with 7 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0xd1200000-0xd12fffff,0xd1704000-0xd1707fff at device 0.2 on pci1 [...] igb2: EEPROM V1.67-0 Option ROM V15-b0-p27 eTrack 0x80000ba6 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 6 RX queues 6 TX queues [...] igb2: Using MSI-X interrupts with 7 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0xd1100000-0xd11fffff,0xd1700000-0xd1703fff at device 0.3 on pci1 [...] igb3: EEPROM V1.67-0 Option ROM V15-b0-p27 eTrack 0x80000ba6 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 6 RX queues 6 TX queues [...] igb3: Using MSI-X interrupts with 7 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 6/1024, RX 6/1024 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xd0000000-0xd0ffffff,0xc0000000-0xcfffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0xd1920000-0xd192ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0xd1934000-0xd1935fff,0xd193a000-0xd193a0ff,0xd1939000-0xd19397ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib2: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme0: <Generic NVMe Device> mem 0xd1800000-0xd1803fff at device 0.0 on pci2 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Coffee Lake HDA Controller> mem 0xd1930000-0xd1933fff,0xd1000000-0xd10fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] em0: <Intel(R) I219-V CNP(7)> mem 0xd1900000-0xd191ffff at device 31.6 on pci0 [...] em0: EEPROM V0.5-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] acpi_syscontainer0: <System Container> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] Timecounter "TSC-low" frequency 1499989303 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] nvme0: Allocated 38MB host memory buffer [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] nvd0: <KBG30ZMS256G NVMe TOSHIBA 256GB> NVMe namespace [...] nvd0: 244198MB (500118192 512 byte sectors) [...] hdacc0: <Realtek ALC255 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC255 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC255 (Analog 2.0+HP)> at nid 20,33 on hdaa0 [...] pcm1: <Realtek ALC255 (Rear Analog Line-out)> at nid 27 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] cd0 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] cd0: <HL-DT-ST DVD+-RW GU90N A1C3> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] ses0: pass0,cd0 in 'Slot 02', SATA Slot: scbus2 target 0 [...] uhub0: 26 ports with 26 removable, self powered [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_GPE.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: cannot find EC device [...] acpi_wmi2: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi3: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi3: cannot find EC device [...] acpi_wmi3: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi4: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi4: cannot find EC device [...] acpi_wmi4: Embedded MOF found [...] ACPI: \134_SB.AMW4.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi5: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi5: cannot find EC device [...] acpi_wmi5: Embedded MOF found [...] ACPI: \134_SB.AMW2.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] pchtherm0: <CannonLake-H Thermal Subsystem> mem 0xd193e000-0xd193efff at device 18.0 on pci0 [...] ig4iic0: <Intel Cannon Lake-H I2C Controller-0> at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] iicbus0: <unknown card> at addr 0x8 [...] ichsmb0: <Intel Cannon Lake SMBus controller> port 0xefa0-0xefbf mem 0xd1938000-0xd19380ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] igb0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] igb2: link state changed to DOWN [...] vlan0: changing name to 'igb2_vlan187' [...] vlan1: changing name to 'igb2_vlan69' [...] vlan2: changing name to 'igb2_vlan81' [...] igb3: link state changed to DOWN [...] igb0: link state changed to DOWN [...] igb2: link state changed to UP [...] igb2_vlan187: link state changed to UP [...] igb2_vlan69: link state changed to UP [...] igb2_vlan81: link state changed to UP [...] igb3: link state changed to UP [...] igb0: link state changed to UP [...] tun1: changing name to 'ovpnc1' [...] tun2: changing name to 'ovpnc2' [...] tun3: changing name to 'ovpnc3' [...] wg0: link state changed to UP [...] wg1: link state changed to UP [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ovpnc1: link state changed to UP [...] ovpnc3: link state changed to UP [...] ovpnc2: link state changed to UP [...] wg0: link state changed to DOWN [...] wg1: link state changed to DOWN [...] wg0: link state changed to UP [...] wg1: link state changed to UP [...] wg0: link state changed to DOWN [...] wg1: link state changed to DOWN [...] wg0: link state changed to UP [...] wg1: link state changed to UP [...] wg0: link state changed to DOWN [...] wg1: link state changed to DOWN [...] wg0: link state changed to UP [...] wg1: link state changed to UP [...] wg0: link state changed to DOWN [...] wg1: link state changed to DOWN [...] wg0: link state changed to UP [...] wg1: link state changed to UP [...] wg0: link state changed to DOWN [...] wg1: link state changed to DOWN [...] wg0: link state changed to UP [...] wg1: link state changed to UP [...] ovpnc3: link state changed to DOWN [...] ovpnc3: link state changed to UP [...] ovpnc1: link state changed to DOWN [...] ovpnc1: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpnc3: link state changed to DOWN [...] ovpnc3: link state changed to UP [...] ovpnc1: link state changed to DOWN [...] ovpnc1: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpnc3: link state changed to DOWN [...] ovpnc3: link state changed to UP [...] ovpnc1: link state changed to DOWN [...] ovpnc1: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpnc1: link state changed to DOWN [...] ovpnc1: link state changed to UP [...] ovpnc3: link state changed to DOWN [...] ovpnc3: link state changed to UP [...] ovpnc1: link state changed to DOWN [...] ovpnc1: link state changed to UP [...] ovpnc3: link state changed to DOWN [...] ovpnc3: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] wg0: link state changed to DOWN [...] wg1: link state changed to DOWN [...] ovpnc3: link state changed to DOWN [...] ovpnc1: link state changed to DOWN [...] ovpnc2: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 191 191 fsync: giving up on dirty (error = 35) 0xfffff80001fd6d58: type VCHR [...] usecount 1, writecount 0, refcount 508 seqc users 0 rdev 0xfffff8000201e400 [...] hold count flags () [...] flags () [...] v_object 0xfffff80001fbae70 ref 0 pages 12347 cleanbuf 505 dirtybuf 1 [...] lock type mntfs: EXCL by thread 0xfffffe00dd772560 (pid 18, syncer, tid 100124) [...] 188 1 0 0 done [...] All buffers synced. [...] Uptime: 8d1h38m25s [...] uhub0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p7 stable/23.1-n250411-85724e9ce22 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i5-8500 CPU @ 3.00GHz (3000.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0x9c002600<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16407384064 (15647 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 5 2 3 1 4 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf0000-0xf001e [...] smbios0: Version: 3.1, BCD Revision: 3.1 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL CBX3 > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I350 (Copper)> mem 0xd1400000-0xd14fffff,0xd170c000-0xd170ffff at device 0.0 on pci1 [...] igb0: EEPROM V1.67-0 Option ROM V15-b0-p27 eTrack 0x80000ba6 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 6 RX queues 6 TX queues [...] igb0: Using MSI-X interrupts with 7 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0xd1300000-0xd13fffff,0xd1708000-0xd170bfff at device 0.1 on pci1 [...] igb1: EEPROM V1.67-0 Option ROM V15-b0-p27 eTrack 0x80000ba6 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 6 RX queues 6 TX queues [...] igb1: Using MSI-X interrupts with 7 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0xd1200000-0xd12fffff,0xd1704000-0xd1707fff at device 0.2 on pci1 [...] igb2: EEPROM V1.67-0 Option ROM V15-b0-p27 eTrack 0x80000ba6 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 6 RX queues 6 TX queues [...] igb2: Using MSI-X interrupts with 7 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0xd1100000-0xd11fffff,0xd1700000-0xd1703fff at device 0.3 on pci1 [...] igb3: EEPROM V1.67-0 Option ROM V15-b0-p27 eTrack 0x80000ba6 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 6 RX queues 6 TX queues [...] igb3: Using MSI-X interrupts with 7 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 6/1024, RX 6/1024 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xd0000000-0xd0ffffff,0xc0000000-0xcfffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0xd1920000-0xd192ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0xd1934000-0xd1935fff,0xd193a000-0xd193a0ff,0xd1939000-0xd19397ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib2: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme0: <Generic NVMe Device> mem 0xd1800000-0xd1803fff at device 0.0 on pci2 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Coffee Lake HDA Controller> mem 0xd1930000-0xd1933fff,0xd1000000-0xd10fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] em0: <Intel(R) I219-V CNP(7)> mem 0xd1900000-0xd191ffff at device 31.6 on pci0 [...] em0: EEPROM V0.5-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] acpi_syscontainer0: <System Container> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] Timecounter "TSC-low" frequency 1499989891 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] nvme0: Allocated 38MB host memory buffer [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] nvd0: <KBG30ZMS256G NVMe TOSHIBA 256GB> NVMe namespace [...] nvd0: 244198MB (500118192 512 byte sectors) [...] hdacc0: <Realtek ALC255 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC255 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC255 (Analog 2.0+HP)> at nid 20,33 on hdaa0 [...] pcm1: <Realtek ALC255 (Rear Analog Line-out)> at nid 27 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] cd0 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] cd0: <HL-DT-ST DVD+-RW GU90N A1C3> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] ses0: pass0,cd0 in 'Slot 02', SATA Slot: scbus2 target 0 [...] uhub0: 26 ports with 26 removable, self powered [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_GPE.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: cannot find EC device [...] acpi_wmi2: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi3: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi3: cannot find EC device [...] acpi_wmi3: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi4: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi4: cannot find EC device [...] acpi_wmi4: Embedded MOF found [...] ACPI: \134_SB.AMW4.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi5: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi5: cannot find EC device [...] acpi_wmi5: Embedded MOF found [...] ACPI: \134_SB.AMW2.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] pchtherm0: <CannonLake-H Thermal Subsystem> mem 0xd193e000-0xd193efff at device 18.0 on pci0 [...] ig4iic0: <Intel Cannon Lake-H I2C Controller-0> at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] iicbus0: <unknown card> at addr 0x8 [...] ichsmb0: <Intel Cannon Lake SMBus controller> port 0xefa0-0xefbf mem 0xd1938000-0xd19380ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] igb2: link state changed to DOWN [...] vlan0: changing name to 'igb2_vlan187' [...] vlan1: changing name to 'igb2_vlan69' [...] vlan2: changing name to 'igb2_vlan81' [...] igb3: link state changed to DOWN [...] igb0: link state changed to DOWN [...] igb3: link state changed to UP [...] igb2: link state changed to UP [...] igb2_vlan187: link state changed to UP [...] igb2_vlan69: link state changed to UP [...] igb2_vlan81: link state changed to UP [...] igb0: link state changed to UP [...] tun1: changing name to 'ovpnc1' [...] tun2: changing name to 'ovpnc2' [...] tun3: changing name to 'ovpnc3' [...] wg0: link state changed to UP [...] wg1: link state changed to UP [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ovpnc1: link state changed to UP [...] ovpnc3: link state changed to UP [...] ovpnc2: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] ovpnc3: link state changed to DOWN [...] ovpnc3: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpnc1: link state changed to DOWN [...] ovpnc1: link state changed to UP [...] ovpnc3: link state changed to DOWN [...] ovpnc2: link state changed to DOWN [...] ovpnc3: link state changed to UP [...] ovpnc2: link state changed to UP [...] ovpnc1: link state changed to DOWN [...] ovpnc1: link state changed to UP [...] ovpnc3: link state changed to DOWN [...] ovpnc2: link state changed to DOWN [...] ovpnc3: link state changed to UP [...] ovpnc2: link state changed to UP [...] ovpnc1: link state changed to DOWN [...] ovpnc1: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpnc3: link state changed to DOWN [...] ovpnc3: link state changed to UP [...] ovpnc1: link state changed to DOWN [...] ovpnc1: link state changed to UP [...] ovpnc3: link state changed to DOWN [...] ovpnc3: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpnc3: link state changed to DOWN [...] ovpnc3: link state changed to UP [...] ovpnc1: link state changed to DOWN [...] ovpnc1: link state changed to UP [...] ovpnc1: link state changed to DOWN [...] ovpnc1: link state changed to UP [...] ovpnc3: link state changed to DOWN [...] ovpnc3: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpnc1: link state changed to DOWN [...] ovpnc1: link state changed to UP [...] ovpnc3: link state changed to DOWN [...] ovpnc3: link state changed to UP [...] ovpnc1: link state changed to DOWN [...] ovpnc1: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] ovpnc1: link state changed to DOWN [...] ovpnc1: link state changed to UP [...] ovpnc1: link state changed to DOWN [...] ovpnc1: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpnc3: link state changed to DOWN [...] ovpnc3: link state changed to UP [...] ovpnc3: link state changed to DOWN [...] ovpnc3: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] ovpnc2: link state changed to DOWN [...] ovpnc1: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpnc1: link state changed to UP [...] ovpnc3: link state changed to DOWN [...] ovpnc3: link state changed to UP [...] ovpnc1: link state changed to DOWN [...] ovpnc1: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] ovpnc3: link state changed to DOWN [...] ovpnc3: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpnc1: link state changed to DOWN [...] ovpnc1: link state changed to UP [...] ovpnc3: link state changed to DOWN [...] ovpnc3: link state changed to UP [...] ovpnc3: link state changed to DOWN [...] ovpnc3: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpnc1: link state changed to DOWN [...] ovpnc1: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb3 [...] ovpnc3: link state changed to DOWN [...] ovpnc3: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpnc1: link state changed to DOWN [...] ovpnc1: link state changed to UP [...] ovpnc1: link state changed to DOWN [...] ovpnc3: link state changed to DOWN [...] ovpnc1: link state changed to UP [...] ovpnc3: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpnc1: link state changed to DOWN [...] ovpnc1: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpnc3: link state changed to DOWN [...] ovpnc3: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpnc3: link state changed to DOWN [...] ovpnc3: link state changed to UP [...] ovpnc1: link state changed to DOWN [...] ovpnc1: link state changed to UP [...] ovpnc3: link state changed to DOWN [...] ovpnc3: link state changed to UP [...] ovpnc2: link state changed to DOWN [...] ovpnc2: link state changed to UP [...] ovpnc1: link state changed to DOWN [...] ovpnc1: link state changed to UP [...] wg0: link state changed to DOWN [...] wg1: link state changed to DOWN [...] ovpnc3: link state changed to DOWN [...] ovpnc2: link state changed to DOWN [...] ovpnc1: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 191 1 0 0 done [...] All buffers synced. [...] Uptime: 78d23h26m43s [...] uhub0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p7 stable/23.1-n250445-fb81510bd0e SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i5-8500 CPU @ 3.00GHz (3000.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0x9c002600<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16407384064 (15647 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 4 2 1 5 3 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf0000-0xf001e [...] smbios0: Version: 3.1, BCD Revision: 3.1 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL CBX3 > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I350 (Copper)> mem 0xd1400000-0xd14fffff,0xd170c000-0xd170ffff at device 0.0 on pci1 [...] igb0: EEPROM V1.67-0 Option ROM V15-b0-p27 eTrack 0x80000ba6 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 6 RX queues 6 TX queues [...] igb0: Using MSI-X interrupts with 7 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0xd1300000-0xd13fffff,0xd1708000-0xd170bfff at device 0.1 on pci1 [...] igb1: EEPROM V1.67-0 Option ROM V15-b0-p27 eTrack 0x80000ba6 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 6 RX queues 6 TX queues [...] igb1: Using MSI-X interrupts with 7 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb2: <Intel(R) I350 (Copper)> mem 0xd1200000-0xd12fffff,0xd1704000-0xd1707fff at device 0.2 on pci1 [...] igb2: EEPROM V1.67-0 Option ROM V15-b0-p27 eTrack 0x80000ba6 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 6 RX queues 6 TX queues [...] igb2: Using MSI-X interrupts with 7 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb3: <Intel(R) I350 (Copper)> mem 0xd1100000-0xd11fffff,0xd1700000-0xd1703fff at device 0.3 on pci1 [...] igb3: EEPROM V1.67-0 Option ROM V15-b0-p27 eTrack 0x80000ba6 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 6 RX queues 6 TX queues [...] igb3: Using MSI-X interrupts with 7 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 6/1024, RX 6/1024 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xd0000000-0xd0ffffff,0xc0000000-0xcfffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0xd1920000-0xd192ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0xd1934000-0xd1935fff,0xd193a000-0xd193a0ff,0xd1939000-0xd19397ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib2: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme0: <Generic NVMe Device> mem 0xd1800000-0xd1803fff at device 0.0 on pci2 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Coffee Lake HDA Controller> mem 0xd1930000-0xd1933fff,0xd1000000-0xd10fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] em0: <Intel(R) I219-V CNP(7)> mem 0xd1900000-0xd191ffff at device 31.6 on pci0 [...] em0: EEPROM V0.5-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart0: console (115200,n,8,1) [...] acpi_syscontainer0: <System Container> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] Timecounter "TSC-low" frequency 1499989200 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] nvme0: Allocated 38MB host memory buffer [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <KBG30ZMS256G NVMe TOSHIBA 256GB> NVMe namespace [...] nvd0: 244198MB (500118192 512 byte sectors) [...] hdacc0: <Realtek ALC255 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC255 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC255 (Analog 2.0+HP)> at nid 20,33 on hdaa0 [...] pcm1: <Realtek ALC255 (Rear Analog Line-out)> at nid 27 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] cd0 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] cd0: <HL-DT-ST DVD+-RW GU90N A1C3> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] ses0: pass0,cd0 in 'Slot 02', SATA Slot: scbus2 target 0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]...