[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p9 stable/24.1-n254969-8659880248c SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(efifb): resolution 800x600 [...] CPU: AMD RX-427BB with AMD Radeon(tm) R7 Graphics (2695.13-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x630f01 Family=0x15 Model=0x30 Stepping=1 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0xfebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC,<b25>,DBE,PTSC> [...] Structured Extended Features=0x9<FSGSBASE,BMI1> [...] XSAVE Features=0x1<XSAVEOPT> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 7148081152 (6816 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <HPQOEM SLIC-WKS> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20201113/tbfadt-796) [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 2 1 3 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.8, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HPQOEM SLIC-WKS> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 450 [...] Event timer "HPET2" frequency 14318180 Hz quality 450 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xc0000000-0xcfffffff,0xd0000000-0xd07fffff,0xfe200000-0xfe23ffff irq 26 at device 1.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <ATI (0x1308) HDA Controller> mem 0xfe264000-0xfe267fff irq 27 at device 1.1 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] bce0: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xfc000000-0xfdffffff irq 24 at device 0.0 on pci1 [...] miibus0: <MII bus> on bce0 [...] brgphy0: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bce0: Using defaults for TSO: 65518/35/2048 [...] bce0: Ethernet address: ... [...] bce0: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.2); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI) [...] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] bce1: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xfa000000-0xfbffffff irq 25 at device 0.1 on pci1 [...] miibus1: <MII bus> on bce1 [...] brgphy1: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus1 [...] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bce1: Using defaults for TSO: 65518/35/2048 [...] bce1: Ethernet address: ... [...] bce1: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.2); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI) [...] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] pcib2: <ACPI PCI-PCI bridge> irq 18 at device 3.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfe104000-0xfe104fff,0xfe100000-0xfe103fff irq 36 at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: turning off MSI enable bit. [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus2: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus2 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 3.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xfe000000-0xfe000fff,0xd0800000-0xd0803fff irq 40 at device 0.0 on pci3 [...] re1: Using 1 MSI-X message [...] re1: Chip rev. 0x2c800000 [...] re1: MAC rev. 0x00100000 [...] miibus3: <MII bus> on re1 [...] rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus3 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] xhci0: <AMD FCH USB 3.0 controller> mem 0xfe26a000-0xfe26bfff irq 18 at device 16.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] xhci1: <AMD FCH USB 3.0 controller> mem 0xfe268000-0xfe269fff irq 17 at device 16.1 on pci0 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AMD Hudson-2 AHCI SATA controller> port 0xf190-0xf197,0xf180-0xf183,0xf170-0xf177,0xf160-0xf163,0xf150-0xf15f mem 0xfe270000-0xfe2707ff irq 19 at device 17.0 on pci0 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ohci0: <AMD FCH USB Controller> mem 0xfe26f000-0xfe26ffff irq 18 at device 18.0 on pci0 [...] usbus2 on ohci0 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD FCH USB 2.0 controller> mem 0xfe26e000-0xfe26e0ff irq 17 at device 18.2 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] ohci1: <AMD FCH USB Controller> mem 0xfe26d000-0xfe26dfff irq 18 at device 19.0 on pci0 [...] usbus4 on ohci1 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD FCH USB 2.0 controller> mem 0xfe26c000-0xfe26c0ff irq 17 at device 19.2 on pci0 [...] usbus5: EHCI version 1.0 [...] usbus5 on ehci1 [...] usbus5: 480Mbps High Speed USB v2.0 [...] atapci0: <AMD Hudson-2 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf100-0xf10f irq 17 at device 20.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] ata1: <ATA channel> at channel 1 on atapci0 [...] hdac1: <AMD Hudson-2 HDA Controller> mem 0xfe260000-0xfe263fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] driver bug: Unable to set devclass (class: atkbdc devname: (unknown)) [...] ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 [...] ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode [...] ppc0: FIFO with 16/16/8 bytes threshold [...] ppbus0: <Parallel port bus> on ppc0 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1347482272 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] hdacc1: <Realtek ALC221 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC221 Audio Function Group> at nid 1 on hdacc1 [...] pcm4: <Realtek ALC221 (Analog 2.0+HP/2.0)> at nid 20,33 and 24,27 on hdaa1 [...] pcm5: <Realtek ALC221 (Front Analog Headphones)> at nid 26 on hdaa1 [...] Trying to mount root from ufs:/dev/ufs/OPNsense_Install [ro,noatime]... [...] ugen3.1: <AMD EHCI root HUB> at usbus3 [...] ugen5.1: <AMD EHCI root HUB> at usbus5 [...] ugen4.1: <AMD OHCI root HUB> at usbus4 [...] ugen1.1: <AMD XHCI root HUB> at usbus1 [...] uhub0 on usbus3 [...] uhub1 on usbus1 [...] uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub0: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub2 on usbus5 [...] uhub3 on usbus4 [...] uhub3: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] ugen2.1: <AMD OHCI root HUB> at usbus2 [...] ugen0.1: <AMD XHCI root HUB> at usbus0 [...] uhub2: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 [...] uhub4 on usbus0 [...] uhub4: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub5 on usbus2 [...] uhub5: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] uhub5: 5 ports with 5 removable, self powered [...] uhub3: 5 ports with 5 removable, self powered [...] uhub4: 4 ports with 4 removable, self powered [...] uhub1: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 CAM usbus3 usbus5 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device asmedia ASMT1051 (0x174c:0x55aa) [...] ugen0.2: <asmedia ASMT1051> at usbus0 [...] umass0 on uhub4 [...] umass0: <asmedia ASMT1051, class 0/0, rev 3.00/1.00, addr 1> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:6:0: Attached to scbus6 [...] uhub0: 5 ports with 5 removable, self powered [...] uhub2: 5 ports with 5 removable, self powered [...] ugen3.2: <ASMedia AS2107> at usbus3 [...] uhub6 on uhub0 [...] uhub6: <ASMedia AS2107, class 9/0, rev 2.10/0.01, addr 2> on usbus3 [...] uhub6: MTT enabled [...] uhub6: 4 ports with 4 removable, self powered [...] Root mount waiting for: CAM usbus3 [...] ugen3.3: <KINESIS FREESTYLE KB800 KB800 Kinesis Freestyle> at usbus3 [...] ukbd0 on uhub6 [...] ukbd0: <KINESIS FREESTYLE KB800 KB800 Kinesis Freestyle, class 0/0, rev 1.10/1.22, addr 3> on usbus3 [...] kbd2 at ukbd0 [...] ugen3.4: <vendor 0x046d Logitech Webcam C930e> at usbus3 [...] Root mount waiting for: CAM usbus3 [...] ugen3.5: <Compx 2.4G Receiver> at usbus3 [...] ukbd1 on uhub6 [...] ukbd1: <Compx 2.4G Receiver, class 0/0, rev 1.10/6.91, addr 5> on usbus3 [...] kbd3 at ukbd1 [...] ugen3.6: <ASMedia AS2107> at usbus3 [...] uhub7 on uhub6 [...] uhub7: <ASMedia AS2107, class 9/0, rev 2.10/0.01, addr 6> on usbus3 [...] uhub7: MTT enabled [...] uhub7: 4 ports with 4 removable, self powered [...] Root mount waiting for: CAM usbus3 [...] ugen3.7: <flirc.tv flirc> at usbus3 [...] ukbd2 on uhub7 [...] ukbd2: <flirc.tv flirc, class 0/0, rev 2.00/2.00, addr 7> on usbus3 [...] kbd4 at ukbd2 [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SPCC M.2 SSD V1102A0> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 488386MB (1000215216 512 byte sectors) [...] da0 at umass-sim0 bus 0 scbus6 target 0 lun 0 [...] da0: <ASMT 2115 0> Fixed Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: 488386MB (1000215216 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] GEOM: da0: the secondary GPT header is not in the last LBA. [...] GEOM: diskid/XXXXXXXXXXXXXXXXXX the secondary GPT header is not in the last LBA. [...] GEOM: diskid/XXXXXXXXXXXXXXXXXX the secondary GPT header is not in the last LBA. [...] GEOM: diskid/XXXXXXXXXXXXXXXXXX the secondary GPT header is not in the last LBA. [...] GEOM: diskid/XXXXXXXXXXXXXXXXXX the secondary GPT header is not in the last LBA. [...] GEOM: diskid/XXXXXXXXXXXXXXXXXX the secondary GPT header is not in the last LBA. [...] re0: link state changed to UP [...] re1: link state changed to DOWN [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMID.WQAB: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] uhid0 on uhub6 [...] uhid0: <KINESIS FREESTYLE KB800 KB800 Kinesis Freestyle, class 0/0, rev 1.10/1.22, addr 3> on usbus3 [...] uhid1 on uhub7 [...] uhid1: <flirc.tv flirc, class 0/0, rev 2.00/2.00, addr 7> on usbus3 [...] uhid2 on uhub7 [...] uhid2: <flirc.tv flirc, class 0/0, rev 2.00/2.00, addr 7> on usbus3 [...] uaudio0 on uhub6 [...] uaudio0: <vendor 0x046d Logitech Webcam C930e, class 239/2, rev 2.00/0.13, addr 4> on usbus3 [...] uaudio0: No playback. [...] uaudio0: Record[0]: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 32000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 24000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 16000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: No MIDI sequencer. [...] pcm6: <USB audio> on uaudio0 [...] uaudio0: No HID volume keys found. [...] ums0 on uhub6 [...] ums0: <Compx 2.4G Receiver, class 0/0, rev 1.10/6.91, addr 5> on usbus3 [...] ums0: 5 buttons and [XYZT] coordinates ID=1 [...] bce0: link state changed to DOWN [...] bce1: link state changed to DOWN [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.2: <asmedia ASMT1051> at usbus0 (disconnected) [...] umass0: at uhub4, port 2, addr 1 (disconnected) [...] da0 at umass-sim0 bus 0 scbus6 target 0 lun 0 [...] da0: <ASMT 2115 0> s/n ... detached [...] (da0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 done [...] All buffers synced. [...] Uptime: 23m29s [...] uhub2: detached [...] uhub3: detached [...] ukbd0: detached [...] uhid0: detached [...] pcm6: detached [...] uaudio0: detached [...] ukbd1: detached [...] ums0: detached [...] uhid1: detached [...] ukbd2: detached [...] uhid2: detached [...] uhub7: detached [...] uhub6: detached [...] uhub0: detached [...] ugen2.2: <ASMedia AS2107> at usbus2 [...] uhub0 on uhub5 [...] uhub0: <ASMedia AS2107, class 9/0, rev 2.10/0.01, addr 2> on usbus2 [...] uhub0: 4 ports with 4 removable, self powered [...] ugen2.3: <KINESIS FREESTYLE KB800 KB800 Kinesis Freestyle> at usbus2 [...] ukbd0 on uhub0 [...] ukbd0: <KINESIS FREESTYLE KB800 KB800 Kinesis Freestyle, class 0/0, rev 1.10/1.22, addr 3> on usbus2 [...] kbd2 at ukbd0 [...] uhid0 on uhub0 [...] uhid0: <KINESIS FREESTYLE KB800 KB800 Kinesis Freestyle, class 0/0, rev 1.10/1.22, addr 3> on usbus2 [...] ugen2.4: <vendor 0x046d Logitech Webcam C930e> at usbus2 [...] uaudio0 on uhub0 [...] uaudio0: <vendor 0x046d Logitech Webcam C930e, class 239/2, rev 2.00/0.13, addr 4> on usbus2 [...] uaudio0: No playback. [...] uaudio0: Record[0]: 16000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: No MIDI sequencer. [...] pcm6: <USB audio> on uaudio0 [...] uaudio0: No HID volume keys found. [...] ugen2.5: <Compx 2.4G Receiver> at usbus2 [...] ukbd1 on uhub0 [...] ukbd1: <Compx 2.4G Receiver, class 0/0, rev 1.10/6.91, addr 5> on usbus2 [...] kbd3 at ukbd1 [...] ums0 on uhub0 [...] ums0: <Compx 2.4G Receiver, class 0/0, rev 1.10/6.91, addr 5> on usbus2 [...] ums0: 5 buttons and [XYZT] coordinates ID=1 [...] ugen2.6: <ASMedia AS2107> at usbus2 [...] uhub2 on uhub0 [...] uhub2: <ASMedia AS2107, class 9/0, rev 2.10/0.01, addr 6> on usbus2 [...] uhub2: 4 ports with 4 removable, self powered [...] ugen2.7: <flirc.tv flirc> at usbus2 [...] uhid1 on uhub2 [...] uhid1: <flirc.tv flirc, class 0/0, rev 2.00/2.00, addr 7> on usbus2 [...] ukbd2 on uhub2 [...] ukbd2: <flirc.tv flirc, class 0/0, rev 2.00/2.00, addr 7> on usbus2 [...] kbd4 at ukbd2 [...] uhid2 on uhub2 [...] uhid2: <flirc.tv flirc, class 0/0, rev 2.00/2.00, addr 7> on usbus2 [...] ukbd0: detached [...] uhid0: detached [...] pcm6: detached [...] uaudio0: detached [...] ukbd1: detached [...] ums0: detached [...] uhid1: detached [...] ukbd2: detached [...] uhid2: detached [...] uhub2: detached [...] uhub0: detached [...] uhub5: detached [...] uhub1: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p9 stable/24.1-n254969-8659880248c SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(efifb): resolution 800x600 [...] CPU: AMD RX-427BB with AMD Radeon(tm) R7 Graphics (2695.07-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x630f01 Family=0x15 Model=0x30 Stepping=1 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0xfebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC,<b25>,DBE,PTSC> [...] Structured Extended Features=0x9<FSGSBASE,BMI1> [...] XSAVE Features=0x1<XSAVEOPT> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 7141801984 (6810 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <HPQOEM SLIC-WKS> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20201113/tbfadt-796) [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 2 3 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.8, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HPQOEM SLIC-WKS> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 450 [...] Event timer "HPET2" frequency 14318180 Hz quality 450 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xc0000000-0xcfffffff,0xd0000000-0xd07fffff,0xfe200000-0xfe23ffff irq 26 at device 1.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <ATI (0x1308) HDA Controller> mem 0xfe264000-0xfe267fff irq 27 at device 1.1 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] bce0: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xfc000000-0xfdffffff irq 24 at device 0.0 on pci1 [...] miibus0: <MII bus> on bce0 [...] brgphy0: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bce0: Using defaults for TSO: 65518/35/2048 [...] bce0: Ethernet address: ... [...] bce0: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.2); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI) [...] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] bce1: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xfa000000-0xfbffffff irq 25 at device 0.1 on pci1 [...] miibus1: <MII bus> on bce1 [...] brgphy1: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus1 [...] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bce1: Using defaults for TSO: 65518/35/2048 [...] bce1: Ethernet address: ... [...] bce1: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.2); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI) [...] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] pcib2: <ACPI PCI-PCI bridge> irq 18 at device 3.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfe104000-0xfe104fff,0xfe100000-0xfe103fff irq 36 at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus2: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus2 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 3.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xfe000000-0xfe000fff,0xd0800000-0xd0803fff irq 40 at device 0.0 on pci3 [...] re1: Using 1 MSI-X message [...] re1: Chip rev. 0x2c800000 [...] re1: MAC rev. 0x00100000 [...] miibus3: <MII bus> on re1 [...] rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus3 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] xhci0: <AMD FCH USB 3.0 controller> mem 0xfe26a000-0xfe26bfff irq 18 at device 16.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] xhci1: <AMD FCH USB 3.0 controller> mem 0xfe268000-0xfe269fff irq 17 at device 16.1 on pci0 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AMD Hudson-2 AHCI SATA controller> port 0xf190-0xf197,0xf180-0xf183,0xf170-0xf177,0xf160-0xf163,0xf150-0xf15f mem 0xfe270000-0xfe2707ff irq 19 at device 17.0 on pci0 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ohci0: <AMD FCH USB Controller> mem 0xfe26f000-0xfe26ffff irq 18 at device 18.0 on pci0 [...] usbus2 on ohci0 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD FCH USB 2.0 controller> mem 0xfe26e000-0xfe26e0ff irq 17 at device 18.2 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] ohci1: <AMD FCH USB Controller> mem 0xfe26d000-0xfe26dfff irq 18 at device 19.0 on pci0 [...] usbus4 on ohci1 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD FCH USB 2.0 controller> mem 0xfe26c000-0xfe26c0ff irq 17 at device 19.2 on pci0 [...] usbus5: EHCI version 1.0 [...] usbus5 on ehci1 [...] usbus5: 480Mbps High Speed USB v2.0 [...] atapci0: <AMD Hudson-2 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf100-0xf10f irq 17 at device 20.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] ata1: <ATA channel> at channel 1 on atapci0 [...] hdac1: <AMD Hudson-2 HDA Controller> mem 0xfe260000-0xfe263fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] driver bug: Unable to set devclass (class: atkbdc devname: (unknown)) [...] ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 [...] ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode [...] ppc0: FIFO with 16/16/8 bytes threshold [...] ppbus0: <Parallel port bus> on ppc0 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1347482428 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <AMD XHCI root HUB> at usbus0 [...] ugen3.1: <AMD EHCI root HUB> at usbus3 [...] ugen5.1: <AMD EHCI root HUB> at usbus5 [...] ugen2.1: <AMD OHCI root HUB> at usbus2 [...] uhub0 on usbus0 [...] uhub1 on usbus5 [...] uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub2 on usbus2 [...] uhub2: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] uhub3 on usbus3 [...] uhub3: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] ugen4.1: <AMD OHCI root HUB> at usbus4 [...] uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 [...] ugen1.1: <AMD XHCI root HUB> at usbus1 [...] uhub4 on usbus4 [...] uhub4: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] hdacc1: <Realtek ALC221 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC221 Audio Function Group> at nid 1 on hdacc1 [...] pcm4: <Realtek ALC221 (Analog 2.0+HP/2.0)> at nid 20,33 and 24,27 on hdaa1 [...] pcm5: <Realtek ALC221 (Front Analog Headphones)> at nid 26 on hdaa1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub5 on usbus1 [...] uhub5: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub2: 5 ports with 5 removable, self powered [...] uhub4: 5 ports with 5 removable, self powered [...] uhub0: 4 ports with 4 removable, self powered [...] uhub5: 4 ports with 4 removable, self powered [...] Root mount waiting for: CAM usbus3 usbus5 [...] uhub3: 5 ports with 5 removable, self powered [...] uhub1: 5 ports with 5 removable, self powered [...] ugen3.2: <ASMedia AS2107> at usbus3 [...] uhub6 on uhub3 [...] uhub6: <ASMedia AS2107, class 9/0, rev 2.10/0.01, addr 2> on usbus3 [...] uhub6: MTT enabled [...] uhub6: 4 ports with 4 removable, self powered [...] Root mount waiting for: CAM usbus3 [...] ugen3.3: <KINESIS FREESTYLE KB800 KB800 Kinesis Freestyle> at usbus3 [...] ukbd0 on uhub6 [...] ukbd0: <KINESIS FREESTYLE KB800 KB800 Kinesis Freestyle, class 0/0, rev 1.10/1.22, addr 3> on usbus3 [...] kbd2 at ukbd0 [...] ugen3.4: <vendor 0x046d Logitech Webcam C930e> at usbus3 [...] Root mount waiting for: CAM usbus3 [...] ugen3.5: <Compx 2.4G Receiver> at usbus3 [...] ukbd1 on uhub6 [...] ukbd1: <Compx 2.4G Receiver, class 0/0, rev 1.10/6.91, addr 5> on usbus3 [...] kbd3 at ukbd1 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SPCC M.2 SSD V1102A0> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 488386MB (1000215216 512 byte sectors) [...] ugen3.6: <ASMedia AS2107> at usbus3 [...] uhub7 on uhub6 [...] uhub7: <ASMedia AS2107, class 9/0, rev 2.10/0.01, addr 6> on usbus3 [...] uhub7: MTT enabled [...] uhub7: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus3 [...] ugen3.7: <flirc.tv flirc> at usbus3 [...] ukbd2 on uhub7 [...] ukbd2: <flirc.tv flirc, class 0/0, rev 2.00/2.00, addr 7> on usbus3 [...] kbd4 at ukbd2 [...] re0: link state changed to UP [...] re1: link state changed to DOWN [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMID.WQAB: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] uhid0 on uhub6 [...] uhid0: <KINESIS FREESTYLE KB800 KB800 Kinesis Freestyle, class 0/0, rev 1.10/1.22, addr 3> on usbus3 [...] uhid1 on uhub7 [...] uhid1: <flirc.tv flirc, class 0/0, rev 2.00/2.00, addr 7> on usbus3 [...] uhid2 on uhub7 [...] uhid2: <flirc.tv flirc, class 0/0, rev 2.00/2.00, addr 7> on usbus3 [...] uaudio0 on uhub6 [...] uaudio0: <vendor 0x046d Logitech Webcam C930e, class 239/2, rev 2.00/0.13, addr 4> on usbus3 [...] uaudio0: No playback. [...] uaudio0: Record[0]: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 32000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 24000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 16000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: No MIDI sequencer. [...] pcm6: <USB audio> on uaudio0 [...] uaudio0: No HID volume keys found. [...] ums0 on uhub6 [...] ums0: <Compx 2.4G Receiver, class 0/0, rev 1.10/6.91, addr 5> on usbus3 [...] ums0: 5 buttons and [XYZT] coordinates ID=1 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] bce0: link state changed to DOWN [...] bce1: link state changed to DOWN [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re1: link state changed to UP [...] re1: link state changed to DOWN [...] re1: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 5 0 0 done [...] All buffers synced. [...] Uptime: 9m0s [...] uhub1: detached [...] uhub4: detached [...] ukbd0: detached [...] uhid0: detached [...] pcm6: detached [...] uaudio0: detached [...] ukbd1: detached [...] ums0: detached [...] uhid1: detached [...] ukbd2: detached [...] uhid2: detached [...] uhub7: detached [...] uhub6: detached [...] uhub3: detached [...] ugen2.2: <ASMedia AS2107> at usbus2 [...] uhub1 on uhub2 [...] uhub1: <ASMedia AS2107, class 9/0, rev 2.10/0.01, addr 2> on usbus2 [...] uhub1: 4 ports with 4 removable, self powered [...] ugen2.3: <KINESIS FREESTYLE KB800 KB800 Kinesis Freestyle> at usbus2 [...] ukbd0 on uhub1 [...] ukbd0: <KINESIS FREESTYLE KB800 KB800 Kinesis Freestyle, class 0/0, rev 1.10/1.22, addr 3> on usbus2 [...] kbd2 at ukbd0 [...] uhid0 on uhub1 [...] uhid0: <KINESIS FREESTYLE KB800 KB800 Kinesis Freestyle, class 0/0, rev 1.10/1.22, addr 3> on usbus2 [...] ugen2.4: <vendor 0x046d Logitech Webcam C930e> at usbus2 [...] uaudio0 on uhub1 [...] uaudio0: <vendor 0x046d Logitech Webcam C930e, class 239/2, rev 2.00/0.13, addr 4> on usbus2 [...] uaudio0: No playback. [...] uaudio0: Record[0]: 16000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: No MIDI sequencer. [...] pcm6: <USB audio> on uaudio0 [...] uaudio0: No HID volume keys found. [...] ugen2.5: <Compx 2.4G Receiver> at usbus2 [...] ukbd1 on uhub1 [...] ukbd1: <Compx 2.4G Receiver, class 0/0, rev 1.10/6.91, addr 5> on usbus2 [...] kbd3 at ukbd1 [...] ums0 on uhub1 [...] ums0: <Compx 2.4G Receiver, class 0/0, rev 1.10/6.91, addr 5> on usbus2 [...] ums0: 5 buttons and [XYZT] coordinates ID=1 [...] ugen2.6: <ASMedia AS2107> at usbus2 [...] uhub3 on uhub1 [...] uhub3: <ASMedia AS2107, class 9/0, rev 2.10/0.01, addr 6> on usbus2 [...] uhub3: 4 ports with 4 removable, self powered [...] ugen2.7: <flirc.tv flirc> at usbus2 [...] uhid1 on uhub3 [...] uhid1: <flirc.tv flirc, class 0/0, rev 2.00/2.00, addr 7> on usbus2 [...] ukbd2 on uhub3 [...] ukbd2: <flirc.tv flirc, class 0/0, rev 2.00/2.00, addr 7> on usbus2 [...] kbd4 at ukbd2 [...] uhid2 on uhub3 [...] uhid2: <flirc.tv flirc, class 0/0, rev 2.00/2.00, addr 7> on usbus2 [...] ukbd0: detached [...] uhid0: detached [...] pcm6: detached [...] uaudio0: detached [...] ukbd1: detached [...] ums0: detached [...] uhid1: detached [...] ukbd2: detached [...] uhid2: detached [...] uhub3: detached [...] uhub1: detached [...] uhub2: detached [...] uhub5: detached [...] uhub0: detached [...] re1: link state changed to DOWN [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p9 stable/24.1-n254969-8659880248c SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(efifb): resolution 800x600 [...] CPU: AMD RX-427BB with AMD Radeon(tm) R7 Graphics (2695.03-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x630f01 Family=0x15 Model=0x30 Stepping=1 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0xfebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC,<b25>,DBE,PTSC> [...] Structured Extended Features=0x9<FSGSBASE,BMI1> [...] XSAVE Features=0x1<XSAVEOPT> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 7141801984 (6810 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <HPQOEM SLIC-WKS> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20201113/tbfadt-796) [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 3 2 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.8, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HPQOEM SLIC-WKS> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 450 [...] Event timer "HPET2" frequency 14318180 Hz quality 450 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xc0000000-0xcfffffff,0xd0000000-0xd07fffff,0xfe200000-0xfe23ffff irq 26 at device 1.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <ATI (0x1308) HDA Controller> mem 0xfe264000-0xfe267fff irq 27 at device 1.1 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] bce0: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xfc000000-0xfdffffff irq 24 at device 0.0 on pci1 [...] miibus0: <MII bus> on bce0 [...] brgphy0: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bce0: Using defaults for TSO: 65518/35/2048 [...] bce0: Ethernet address: ... [...] bce0: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.2); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI) [...] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] bce1: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xfa000000-0xfbffffff irq 25 at device 0.1 on pci1 [...] miibus1: <MII bus> on bce1 [...] brgphy1: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus1 [...] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bce1: Using defaults for TSO: 65518/35/2048 [...] bce1: Ethernet address: ... [...] bce1: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.2); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI) [...] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] pcib2: <ACPI PCI-PCI bridge> irq 18 at device 3.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfe104000-0xfe104fff,0xfe100000-0xfe103fff irq 36 at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus2: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus2 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 3.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xfe000000-0xfe000fff,0xd0800000-0xd0803fff irq 40 at device 0.0 on pci3 [...] re1: Using 1 MSI-X message [...] re1: Chip rev. 0x2c800000 [...] re1: MAC rev. 0x00100000 [...] miibus3: <MII bus> on re1 [...] rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus3 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] xhci0: <AMD FCH USB 3.0 controller> mem 0xfe26a000-0xfe26bfff irq 18 at device 16.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] xhci1: <AMD FCH USB 3.0 controller> mem 0xfe268000-0xfe269fff irq 17 at device 16.1 on pci0 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AMD Hudson-2 AHCI SATA controller> port 0xf190-0xf197,0xf180-0xf183,0xf170-0xf177,0xf160-0xf163,0xf150-0xf15f mem 0xfe270000-0xfe2707ff irq 19 at device 17.0 on pci0 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ohci0: <AMD FCH USB Controller> mem 0xfe26f000-0xfe26ffff irq 18 at device 18.0 on pci0 [...] usbus2 on ohci0 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD FCH USB 2.0 controller> mem 0xfe26e000-0xfe26e0ff irq 17 at device 18.2 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] ohci1: <AMD FCH USB Controller> mem 0xfe26d000-0xfe26dfff irq 18 at device 19.0 on pci0 [...] usbus4 on ohci1 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD FCH USB 2.0 controller> mem 0xfe26c000-0xfe26c0ff irq 17 at device 19.2 on pci0 [...] usbus5: EHCI version 1.0 [...] usbus5 on ehci1 [...] usbus5: 480Mbps High Speed USB v2.0 [...] atapci0: <AMD Hudson-2 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf100-0xf10f irq 17 at device 20.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] ata1: <ATA channel> at channel 1 on atapci0 [...] hdac1: <AMD Hudson-2 HDA Controller> mem 0xfe260000-0xfe263fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] driver bug: Unable to set devclass (class: atkbdc devname: (unknown)) [...] ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 [...] ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode [...] ppc0: FIFO with 16/16/8 bytes threshold [...] ppbus0: <Parallel port bus> on ppc0 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1347482526 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen5.1: <AMD EHCI root HUB> at usbus5 [...] ugen4.1: <AMD OHCI root HUB> at usbus4 [...] ugen0.1: <AMD XHCI root HUB> at usbus0 [...] ugen1.1: <AMD XHCI root HUB> at usbus1 [...] uhub0 on usbus5 [...] uhub1 on usbus0 [...] uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub0: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 [...] uhub2 on usbus1 [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] hdacc1: <Realtek ALC221 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC221 Audio Function Group> at nid 1 on hdacc1 [...] pcm4: <Realtek ALC221 (Analog 2.0+HP/2.0)> at nid 20,33 and 24,27 on hdaa1 [...] pcm5: <Realtek ALC221 (Front Analog Headphones)> at nid 26 on hdaa1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub3 on usbus4 [...] uhub3: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] ugen2.1: <AMD OHCI root HUB> at usbus2 [...] ugen3.1: <AMD EHCI root HUB> at usbus3 [...] uhub4 on usbus2 [...] uhub4: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] uhub5 on usbus3 [...] uhub5: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub3: 5 ports with 5 removable, self powered [...] uhub4: 5 ports with 5 removable, self powered [...] uhub2: 4 ports with 4 removable, self powered [...] uhub1: 4 ports with 4 removable, self powered [...] Root mount waiting for: CAM usbus3 usbus5 [...] uhub0: 5 ports with 5 removable, self powered [...] uhub5: 5 ports with 5 removable, self powered [...] ugen3.2: <ASMedia AS2107> at usbus3 [...] uhub6 on uhub5 [...] uhub6: <ASMedia AS2107, class 9/0, rev 2.10/0.01, addr 2> on usbus3 [...] uhub6: MTT enabled [...] Root mount waiting for: CAM usbus3 [...] uhub6: 4 ports with 4 removable, self powered [...] ugen3.3: <KINESIS FREESTYLE KB800 KB800 Kinesis Freestyle> at usbus3 [...] ukbd0 on uhub6 [...] ukbd0: <KINESIS FREESTYLE KB800 KB800 Kinesis Freestyle, class 0/0, rev 1.10/1.22, addr 3> on usbus3 [...] kbd2 at ukbd0 [...] Root mount waiting for: CAM usbus3 [...] ugen3.4: <vendor 0x046d Logitech Webcam C930e> at usbus3 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SPCC M.2 SSD V1102A0> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 488386MB (1000215216 512 byte sectors) [...] ugen3.5: <Compx 2.4G Receiver> at usbus3 [...] ukbd1 on uhub6 [...] ukbd1: <Compx 2.4G Receiver, class 0/0, rev 1.10/6.91, addr 5> on usbus3 [...] kbd3 at ukbd1 [...] ugen3.6: <ASMedia AS2107> at usbus3 [...] uhub7 on uhub6 [...] uhub7: <ASMedia AS2107, class 9/0, rev 2.10/0.01, addr 6> on usbus3 [...] uhub7: MTT enabled [...] uhub7: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus3 [...] ugen3.7: <flirc.tv flirc> at usbus3 [...] ukbd2 on uhub7 [...] ukbd2: <flirc.tv flirc, class 0/0, rev 2.00/2.00, addr 7> on usbus3 [...] kbd4 at ukbd2