[...] Limiting closed port RST response from 388 to 205 packets/sec [...] Limiting closed port RST response from 390 to 215 packets/sec [...] Limiting closed port RST response from 230 to 184 packets/sec [...] ugen1.2: <vendor 0x1a40 USB 2.0 Hub> at usbus1 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 1> on usbus1 [...] uhub2: 4 ports with 4 removable, self powered [...] ugen1.3: <DELL Dell USB Wired Entry Keyboard> at usbus1 [...] ukbd0 on uhub2 [...] ukbd0: <DELL Dell USB Wired Entry Keyboard, class 0/0, rev 1.10/1.07, addr 2> on usbus1 [...] kbd2 at ukbd0 [...] uhid0 on uhub2 [...] uhid0: <DELL Dell USB Wired Entry Keyboard, class 0/0, rev 1.10/1.07, addr 2> on usbus1 [...] uhub_reattach_port: device problem (USB_ERR_IOERROR), disabling port 2 [...] ugen1.2: <vendor 0x1a40 USB 2.0 Hub> at usbus1 (disconnected) [...] uhub2: at uhub1, port 1, addr 1 (disconnected) [...] ugen1.3: <DELL Dell USB Wired Entry Keyboard> at usbus1 (disconnected) [...] ukbd0: at uhub2, port 1, addr 2 (disconnected) [...] ukbd0: detached [...] uhid0: at uhub2, port 1, addr 2 (disconnected) [...] uhid0: detached [...] uhub2: detached [...] ugen1.2: <vendor 0x1a40 USB 2.0 Hub> at usbus1 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 1> on usbus1 [...] uhub2: 4 ports with 4 removable, self powered [...] ugen1.3: <DELL Dell USB Wired Entry Keyboard> at usbus1 [...] ukbd0 on uhub2 [...] ukbd0: <DELL Dell USB Wired Entry Keyboard, class 0/0, rev 1.10/1.07, addr 2> on usbus1 [...] kbd2 at ukbd0 [...] uhid0 on uhub2 [...] uhid0: <DELL Dell USB Wired Entry Keyboard, class 0/0, rev 1.10/1.07, addr 2> on usbus1 [...] ugen1.4: <Logitech USB-PS/2 Optical Mouse> at usbus1 [...] ums0 on uhub2 [...] ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/11.10, addr 3> on usbus1 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] Limiting closed port RST response from 711 to 216 packets/sec [...] Limiting closed port RST response from 710 to 189 packets/sec [...] Limiting closed port RST response from 938 to 199 packets/sec [...] Limiting closed port RST response from 980 to 186 packets/sec [...] Limiting closed port RST response from 1012 to 203 packets/sec [...] Limiting closed port RST response from 983 to 198 packets/sec [...] Limiting closed port RST response from 718 to 194 packets/sec [...] Limiting closed port RST response from 388 to 196 packets/sec [...] Limiting closed port RST response from 389 to 208 packets/sec [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] Uptime: 105d14h4m42s [...] ---<<BOOT>>--- [...] Copyright (c) 1E4E-D069 The MidnightBSD Project. [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] MidnightBSD 3.2.3 #1n13168-9064b78add(stable/3.2)-dirty: Thu Apr 3 02:20:38 EDT 2025 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] MidnightBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1024x768 [...] CPU: AMD Ryzen 7 5700X 8-Core Processor (3400.07-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0xa20f10 Family=0x19 Model=0x21 Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ef8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,<b30>> [...] Structured Extended Features=0x219c97a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA> [...] Structured Extended Features2=0x40068c<UMIP,PKU,VAES,VPCLMULQDQ,RDPID> [...] Structured Extended Features3=0x10 [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x111ef657<CLZERO,IRPerf,XSaveErPtr> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 68717379584 (65534 MB) [...] avail memory = 66782875648 (63689 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] MidnightBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] MidnightBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.1> irqs 0-23 on motherboard [...] ioapic1 <Version 2.1> irqs 24-55 on motherboard [...] Launching APs: 1 13 11 8 15 6 5 2 4 12 14 9 10 7 3 [...] Timecounter "TSC-low" frequency 1700036941 Hz quality 1000 [...] random: entropy device external interface [...] 000.000017 [4340] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] kbd1 at kbdmux0 [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] amdsmn0: <AMD Family 19h System Management Network> on hostb0 [...] amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0xf6700000-0xf6703fff irq 24 at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> at device 1.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xf66a0000-0xf66a7fff irq 32 at device 0.0 on pci2 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AHCI SATA controller> mem 0xf6680000-0xf669ffff irq 33 at device 0.1 on pci2 [...] ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 34 at device 0.2 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 32 at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 32 at device 4.0 on pci3 [...] pci5: <ACPI PCI bus> on pcib5 [...] bxe0: <QLogic NetXtreme II BCM57810 10GbE (B0) BXE v:1.78.91 [...] > mem 0x7fff000000-0x7fff7fffff,0x7ffe800000-0x7ffeffffff,0x7fff810000-0x7fff81ffff irq 32 at device 0.0 on pci5 [...] bxe0: PCI BAR0 [10] memory allocated: 0x7fff000000-0x7fff7fffff (8388608) -> 0xfffffe00bcc00000 [...] bxe0: PCI BAR2 [18] memory allocated: 0x7ffe800000-0x7ffeffffff (8388608) -> 0xfffffe00bd400000 [...] bxe0: PCI BAR4 [20] memory allocated: 0x7fff810000-0x7fff81ffff (65536) -> 0xfffffe00045cf000 [...] bxe0: Found 10Gb Fiber media. [...] bxe0: IFMEDIA flags : 20 [...] bxe0: Using defaults for TSO: 65518/35/2048 [...] bxe0: Ethernet address: ... [...] bxe0: MSI-X vectors Requested 5 and Allocated 5 [...] bxe1: <QLogic NetXtreme II BCM57810 10GbE (B0) BXE v:1.78.91 [...] > mem 0x7ffe000000-0x7ffe7fffff,0x7ffd800000-0x7ffdffffff,0x7fff800000-0x7fff80ffff irq 33 at device 0.1 on pci5 [...] bxe1: PCI BAR0 [10] memory allocated: 0x7ffe000000-0x7ffe7fffff (8388608) -> 0xfffffe00be400000 [...] bxe1: PCI BAR2 [18] memory allocated: 0x7ffd800000-0x7ffdffffff (8388608) -> 0xfffffe00bec00000 [...] bxe1: PCI BAR4 [20] memory allocated: 0x7fff800000-0x7fff80ffff (65536) -> 0xfffffe00bca00000 [...] bxe1: Found 10Gb Fiber media. [...] bxe1: IFMEDIA flags : 20 [...] bxe1: Using defaults for TSO: 65518/35/2048 [...] bxe1: Ethernet address: ... [...] bxe1: MSI-X vectors Requested 5 and Allocated 5 [...] pcib6: <ACPI PCI-PCI bridge> at device 3.1 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf07f mem 0xf5000000-0xf5ffffff,0xe8000000-0xefffffff,0xf0000000-0xf1ffffff irq 54 at device 0.0 on pci6 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x0e0f) HDA Controller> mem 0xf6080000-0xf6083fff irq 55 at device 0.1 on pci6 [...] pcib7: <ACPI PCI-PCI bridge> at device 7.1 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] pci7: <unknown> at device 0.0 (no driver attached) [...] pcib8: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] pci8: <unknown> at device 0.0 (no driver attached) [...] pci8: <encrypt/decrypt> at device 0.1 (no driver attached) [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xf6200000-0xf62fffff irq 39 at device 0.3 on pci8 [...] xhci1: 64 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in MidnightBSD 5. [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x1022 XHCI root HUB> at usbus0 [...] ugen1.1: <0x1022 XHCI root HUB> at usbus1 [...] uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] nvd0: <Samsung SSD 970 PRO 512GB> NVMe namespace [...] nvd0: 488386MB (1000215216 512 byte sectors) [...] hdacc0: <NVIDIA (0x0051) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0051) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x0051) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x0051) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <INTEL SSDSC2KB019T8 XCV10132> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 1831420MB (3750748848 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <SAMSUNG MZ7LM1T9HCJM-00003 GXT3003Q> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 1831420MB (3750748848 512 byte sectors) [...] ada1: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ada2 at ahcich4 bus 0 scbus2 target 0 lun 0 [...] ada2: <INTEL SSDSC2KB019T8 XCV10132> ACS-3 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada2: Command Queueing enabled [...] ada2: 1831420MB (3750748848 512 byte sectors) [...] ada3 at ahcich5 bus 0 scbus3 target 0 lun 0 [...] ada3: <SAMSUNG MZ7LM1T9HCJM-00003 GXT3003Q> ACS-2 ATA SATA 3.x device [...] ada3: Serial Number... [...] ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada3: Command Queueing enabled [...] ada3: 1831420MB (3750748848 512 byte sectors) [...] ada3: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 usbus1 [...] uhub1: 8 ports with 8 removable, self powered [...] uhub0: 22 ports with 22 removable, self powered [...] ugen1.2: <vendor 0x1a40 USB 2.0 Hub> at usbus1 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 1> on usbus1 [...] uhub2: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus1 [...] ugen1.3: <DELL Dell USB Wired Entry Keyboard> at usbus1 [...] ukbd0 on uhub2 [...] ukbd0: <DELL Dell USB Wired Entry Keyboard, class 0/0, rev 1.10/1.07, addr 2> on usbus1 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus1 [...] ugen1.4: <Logitech USB-PS/2 Optical Mouse> at usbus1 [...] nvidia0: <GeForce GT 710> on vgapci0 [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: child nvidia0 requested pci_enable_io [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] device_attach: acpi_wmi0 attach returned 6 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] device_attach: acpi_wmi0 attach returned 6 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] device_attach: acpi_wmi0 attach returned 6 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] device_attach: acpi_wmi0 attach returned 6 [...] driver bug: Unable to set devclass (class: ppc devname: (unknown)) [...] lo0: link state changed to UP [...] bxe0: NIC Link is Up, 10000 Mbps full duplex, Flow control: ON - receive & transmit [...] bxe0: link state changed to UP [...] bxe0: link state changed to DOWN [...] bxe0: NIC Link is Up, 10000 Mbps full duplex, Flow control: ON - receive & transmit [...] bxe0: link state changed to UP [...] uhid0 on uhub2 [...] uhid0: <DELL Dell USB Wired Entry Keyboard, class 0/0, rev 1.10/1.07, addr 2> on usbus1 [...] ums0 on uhub2 [...] ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/11.10, addr 3> on usbus1 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled