[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-STABLE GENERIC amd64 [...] FreeBSD clang version 15.0.7 (https://github.com/llvm/llvm-project.git llvmorg-15.0.7-0-g8dfdcc7b7bf6) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Pentium(R) Silver J5040 CPU @ 2.00GHz (1996.80-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x706a8 Family=0x6 Model=0x7a Stepping=8 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> [...] Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 7860551680 (7496 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL GLK-SOC > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 3 1 2 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x6d8f4000-0x6d8f401e [...] smbios0: Version: 3.2, BCD Revision: 3.2 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Gemini Lake HDA Controller> mem 0xa1310000-0xa1313fff,0xa1000000-0xa10fffff irq 25 at device 14.0 on pci0 [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <Intel Gemini Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xa1314000-0xa1315fff,0xa1318000-0xa13180ff,0xa1317000-0xa13177ff at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> at device 19.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 19.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xa1204000-0xa1204fff,0xa1200000-0xa1203fff at device 0.0 on pci3 [...] re0: Using 1 MSI-X message [...] re0: turning off MSI enable bit. [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib4: <ACPI PCI-PCI bridge> at device 19.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] ahci1: <ASMedia ASM1062 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0xa1100000-0xa11001ff at device 0.0 on pci4 [...] ahci1: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci1: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich2: <AHCI channel> at channel 0 on ahci1 [...] ahcich3: <AHCI channel> at channel 1 on ahci1 [...] xhci0: <Intel Gemini Lake USB 3.0 controller> mem 0xa1300000-0xa130ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1996800266 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Realtek ALC892 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC892 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa0 [...] pcm2: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa0 [...] hdacc1: <Intel Gemini Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Gemini Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Intel Gemini Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <WDC WDS500G2B0A-00SM50 401020WD> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] cd0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] cd0: <HL-DT-ST BD-RE BU40N 1.04> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] Trying to mount root from zfs:zroot/ROOT/ghostbsd-2023-07-05-20-28 []... [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub0: 16 ports with 16 removable, self powered [...] ugen0.2: <vendor 0x1a40 USB 2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 1> on usbus0 [...] Cuse v0.1.37 @ /dev/cuse [...] uhub1: 4 ports with 4 removable, self powered [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] [drm] Got stolen memory base 0x70000000, size 0x10000000 [...] drmn0: [drm] couldn't get memory information [...] drmn0: [drm] Applying Increase DDI Disabled quirk [...] lkpi_iic0: <LinuxKPI I2C> on drmn0 [...] iicbus0: <Philips I2C bus> on lkpi_iic0 [...] iic0: <I2C generic I/O> on iicbus0 [...] lkpi_iic1: <LinuxKPI I2C> on drmn0 [...] iicbus1: <Philips I2C bus> on lkpi_iic1 [...] iic1: <I2C generic I/O> on iicbus1 [...] lkpi_iic2: <LinuxKPI I2C> on drmn0 [...] iicbus2: <Philips I2C bus> on lkpi_iic2 [...] iic2: <I2C generic I/O> on iicbus2 [...] drmn0: successfully loaded firmware image 'i915/glk_dmc_ver1_04.bin' [...] drmn0: [drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4) [...] ugen0.3: <Logitech USB Receiver> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/24.10, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.4: <Logitech USB Optical Mouse> at usbus0 [...] ugen0.5: <Manufacturer Realtek RTL8191S WLAN Adapter> at usbus0 [...] drmn0: [drm] failed to retrieve link info, disabling eDP [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] Initialized i915 1.6.0 20200917 for drmn0 on minor 0 [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] pbase=0x90200000 vbase=0xfffff80090200000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] end FB_INFO [...] ichsmb0: <Intel Gemini Lake SMBus controller> port 0xf040-0xf05f mem 0xa1316000-0xa13160ff at device 31.1 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] ums0 on uhub1 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/24.10, addr 2> on usbus0 [...] ums0: 16 buttons and [XYZT] coordinates ID=2 [...] uhid0 on uhub1 [...] uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/24.10, addr 2> on usbus0 [...] ums1 on uhub1 [...] ums1: <Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 3> on usbus0 [...] ums1: 3 buttons and [XYZ] coordinates ID=0 [...] rsu0 on uhub0 [...] rsu0: <Manufacturer Realtek RTL8191S WLAN Adapter, class 0/0, rev 2.00/2.00, addr 4> on usbus0 [...] rsu0: MAC/BB RTL8712 cut 3 1T2R [...] rsu0: rsu_attach: enabling 11n [...] wlan0: Ethernet address: ... [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled