[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p3 stable/23.7-n254799-01e2d59d337 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM)2 Quad CPU Q9505 @ 2.83GHz (2833.09-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x1067a Family=0x6 Model=0x17 Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0xc08e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,OSXSAVE> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] VT-x: HLT,PAUSE [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8286691328 (7902 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <A_M_I_ OEMAPIC > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 2 3 1 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xfbc00-0xfbc1e [...] smbios0: Version: 2.5 [...] aesni0: No AES or SHA support. [...] acpi0: <A_M_I_ OEMRSDT> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xbc00-0xbc7f mem 0xfd000000-0xfdffffff,0xf0000000-0xf7ffffff,0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x0e0f) HDA Controller> mem 0xfe8fc000-0xfe8fffff irq 17 at device 0.1 on pci1 [...] uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xa800-0xa81f irq 16 at device 26.0 on pci0 [...] uhci0: LegSup = 0x2f00 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xa880-0xa89f irq 21 at device 26.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xac00-0xac1f irq 18 at device 26.2 on pci0 [...] uhci2: LegSup = 0x2f00 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xfcfffc00-0xfcffffff irq 18 at device 26.7 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel 82801JI HDA Controller> mem 0xfcff8000-0xfcffbfff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 [...] pci2: <ACPI PCI bus> on pcib3 [...] atapci0: <Marvell 88SE6121 UDMA133 controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci2 [...] ahci0: <Marvell 88SE6121 AHCI SATA controller> at channel -1 on atapci0 [...] ahci0: AHCI v1.00 with 2 3Gbps ports, Port Multiplier not supported [...] ahci0: quirks=0x457<NOFORCE,NOPMP,NONCQ,2CH,EDGEIS,NOCOUNT> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ata2: <ATA channel> at channel 0 on atapci0 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 [...] pci3: <ACPI PCI bus> on pcib4 [...] ale0: <Atheros AR8121/AR8113/AR8114 PCIe Ethernet> port 0xcc00-0xcc7f mem 0xfe9c0000-0xfe9fffff irq 17 at device 0.0 on pci3 [...] ale0: 960 Tx FIFO, 1024 Rx FIFO [...] ale0: Using 1 MSI messages. [...] miibus0: <MII bus> on ale0 [...] atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0 [...] atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] ale0: Using defaults for TSO: 65518/35/2048 [...] ale0: Ethernet address: ... [...] uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xa080-0xa09f irq 23 at device 29.0 on pci0 [...] uhci3: LegSup = 0x2f00 [...] usbus4 on uhci3 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xa400-0xa41f irq 19 at device 29.1 on pci0 [...] uhci4: LegSup = 0x2f00 [...] usbus5 on uhci4 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xa480-0xa49f irq 18 at device 29.2 on pci0 [...] uhci5: LegSup = 0x2f00 [...] usbus6 on uhci5 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xfcfff800-0xfcfffbff irq 23 at device 29.7 on pci0 [...] usbus7: EHCI version 1.0 [...] usbus7 on ehci1 [...] usbus7: 480Mbps High Speed USB v2.0 [...] pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib5 [...] rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 16 at device 0.0 on pci4 [...] miibus1: <MII bus> on rl0 [...] rlphy0: <RealTek internal media interface> PHY 0 on miibus1 [...] rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] rl0: Ethernet address: ... [...] pci4: <serial bus, FireWire> at device 3.0 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci1: <Intel ICH10 SATA300 controller> port 0x9000-0x9007,0x8c00-0x8c03,0x8880-0x8887,0x8800-0x8803,0x8480-0x848f,0x8400-0x840f irq 19 at device 31.2 on pci0 [...] ata3: <ATA channel> at channel 0 on atapci1 [...] ata4: <ATA channel> at channel 1 on atapci1 [...] atapci2: <Intel ICH10 SATA300 controller> port 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f irq 19 at device 31.5 on pci0 [...] ata5: <ATA channel> at channel 0 on atapci2 [...] ata6: <ATA channel> at channel 1 on atapci2 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1416505919 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <NVIDIA (0x0051) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0051) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x0051) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x0051) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] hdacc1: <Realtek ALC1200 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC1200 Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Realtek ALC1200 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1 [...] pcm3: <Realtek ALC1200 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm4: <Realtek ALC1200 (Rear Digital)> at nid 30 on hdaa1 [...] pcm5: <Realtek ALC1200 (Onboard Digital)> at nid 17 on hdaa1 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] ugen6.1: <Intel UHCI root HUB> at usbus6 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] uhub0 on usbus1 [...] uhub1 on usbus6 [...] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] uhub2 on usbus0 [...] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] ugen5.1: <Intel UHCI root HUB> at usbus5 [...] uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub3 on usbus5 [...] uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] uhub4 on usbus3 [...] uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] ugen4.1: <Intel UHCI root HUB> at usbus4 [...] ugen7.1: <Intel EHCI root HUB> at usbus7 [...] uhub5 on usbus4 [...] uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] uhub6 on usbus2 [...] uhub7 on usbus7 [...] uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 [...] uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub3: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub5: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub6: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus3 CAM usbus7 [...] Root mount waiting for: usbus3 CAM usbus7 [...] uhub7: 6 ports with 6 removable, self powered [...] uhub4: 6 ports with 6 removable, self powered [...] Root mount waiting for: CAM [...] ada0 at ata3 bus 0 scbus3 target 0 lun 0 [...] ada0: <WDC WD10EZRZ-00Z5HB0 80.00A80> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] ada0: 953869MB (1953525168 512 byte sectors)