[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE releng/14.1-n267679-10e31f0946d8 GENERIC amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(efifb): resolution 2560x1440 [...] CPU: Intel(R) Xeon(R) CPU W3690 @ 3.47GHz (3458.12-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206c2 Family=0x6 Model=0x2c Stepping=2 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 51539607552 (49152 MB) [...] avail memory = 50058547200 (47739 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <APPLE Apple00> [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads [...] random: unblocking device. [...] Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20221020/tbfadt-850) [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 3 11 6 4 5 9 8 7 10 2 [...] random: entropy device external interface [...] kbd0 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x7f40b000-0x7f40b01e [...] smbios0: Version: 2.4, BCD Revision: 2.4 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <APPLE Apple00> [...] acpi_ec0: <Embedded Controller: GPE 0x17, ECDT> port 0x62,0x66 on acpi0 [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfedfffff irq 0,8 on acpi0 [...] device_attach: hpet0 attach returned 12 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 5 range: 100 vs fe [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 2.0 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci2 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> at device 3.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> at device 7.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <PCI-PCI bridge> mem 0x90800000-0x90803fff at device 0.0 on pci6 [...] pci7: <PCI bus> on pcib7 [...] pcib8: <PCI-PCI bridge> at device 0.0 on pci7 [...] pci8: <PCI bus> on pcib8 [...] vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0x80000000-0x8fffffff,0x90000000-0x901fffff,0x90600000-0x906fffff at device 0.0 on pci8 [...] hdac0: <ATI (0xab28) HDA Controller> mem 0x90720000-0x90723fff at device 0.1 on pci8 [...] pci0: <dasp, performance counters> at device 15.0 (no driver attached) [...] pci0: <base peripheral, interrupt controller> at device 16.0 (no driver attached) [...] pci0: <base peripheral, interrupt controller> at device 16.1 (no driver attached) [...] pci0: <base peripheral, interrupt controller> at device 17.0 (no driver attached) [...] pci0: <base peripheral, interrupt controller> at device 17.1 (no driver attached) [...] device_attach: ioapic0 attach returned 6 [...] pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached) [...] pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached) [...] pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached) [...] pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached) [...] device_attach: ioapic0 attach returned 6 [...] uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0x40e0-0x40ff at device 26.0 on pci0 [...] uhci0: LegSup = 0x2400 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0x40c0-0x40df at device 26.1 on pci0 [...] uhci1: LegSup = 0x2400 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0x40a0-0x40bf at device 26.2 on pci0 [...] uhci2: LegSup = 0x2400 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0x90926000-0x909263ff at device 26.7 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel 82801JI HDA Controller> mem 0x90920000-0x90923fff at device 27.0 on pci0 [...] pcib9: <PCI-PCI bridge> at device 28.0 on pci0 [...] pci9: <PCI bus> on pcib9 [...] pcib10: <PCI-PCI bridge> at device 28.1 on pci0 [...] pci10: <PCI bus> on pcib10 [...] pcib11: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] em0: <Intel(R) 82574L-Apple> port 0x2000-0x201f mem 0x90500000-0x9051ffff,0x90520000-0x9052ffff,0x90530000-0x90533fff at device 0.0 on pci11 [...] em0: EEPROM V1.9-0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using 2 RX queues 2 TX queues [...] em0: Using MSI-X interrupts with 3 vectors [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib12: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pcib12: failed to allocate initial I/O port window: 0x1000-0x1fff [...] pci12: <ACPI PCI bus> on pcib12 [...] em1: <Intel(R) 82574L-Apple> port 0x5000-0x501f mem 0x90400000-0x9041ffff,0x90420000-0x9042ffff,0x90430000-0x90433fff at device 0.0 on pci12 [...] em1: EEPROM V1.9-0 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using 2 RX queues 2 TX queues [...] em1: Using MSI-X interrupts with 3 vectors [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib13: <ACPI PCI-PCI bridge> at device 28.4 on pci0 [...] pci13: <ACPI PCI bus> on pcib13 [...] pcib14: <ACPI PCI-PCI bridge> at device 0.0 on pci13 [...] pci14: <ACPI PCI bus> on pcib14 [...] pci14: <serial bus, FireWire> at device 0.0 (no driver attached) [...] pcib15: <ACPI PCI-PCI bridge> at device 28.5 on pci0 [...] pci15: <ACPI PCI bus> on pcib15 [...] pci15: <network> at device 0.0 (no driver attached) [...] uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0x4080-0x409f at device 29.0 on pci0 [...] uhci3: LegSup = 0x2400 [...] usbus4 on uhci3 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0x4060-0x407f at device 29.1 on pci0 [...] uhci4: LegSup = 0x2400 [...] usbus5 on uhci4 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0x4040-0x405f at device 29.2 on pci0 [...] uhci5: LegSup = 0x2400 [...] usbus6 on uhci5 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0x90925000-0x909253ff at device 29.7 on pci0 [...] usbus7: EHCI version 1.0 [...] usbus7 on ehci1 [...] usbus7: 480Mbps High Speed USB v2.0 [...] pcib16: <PCI-PCI bridge> at device 30.0 on pci0 [...] pci16: <PCI bus> on pcib16 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel ICH10 AHCI SATA controller> port 0x4138-0x413f,0x414c-0x414f,0x4130-0x4137,0x4148-0x414b,0x4020-0x403f mem 0x90928000-0x909287ff at device 31.2 on pci0 [...] ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1728999768 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] ugen7.1: <Intel EHCI root HUB> at usbus7 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] ugen4.1: <Intel UHCI root HUB> at usbus4 [...] ugen6.1: <Intel UHCI root HUB> at usbus6 [...] ugen5.1: <Intel UHCI root HUB> at usbus5 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] uhub0 on usbus2 [...] uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] uhub1 on usbus1 [...] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub2 on usbus4 [...] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] uhub3 on usbus3 [...] uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub4 on usbus0 [...] uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub5 on usbus7 [...] uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 [...] uhub6 on usbus5 [...] uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] uhub7 on usbus6 [...] uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 [...] pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0 [...] hdacc1: <Realtek ALC889A HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC889A Audio Function Group> at nid 1 on hdacc1 [...] pcm5: <Realtek ALC889A (Analog)> at nid 27 and 26 on hdaa1 [...] pcm6: <Realtek ALC889A (Rear Digital)> at nid 30 and 31 on hdaa1 [...] pcm7: <Realtek ALC889A (Rear Analog)> at nid 25 and 24 on hdaa1 [...] pcm8: <Realtek ALC889A (Rear Analog Line-out)> at nid 20 on hdaa1 [...] ada0 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada0: <Crucial CT1050MX300SSD1 M0CR040> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 1001562MB (2051200368 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 02', SATA Slot: scbus2 target 0 [...] device_attach: ioapic0 attach returned 6 [...] device_attach: ioapic0 attach returned 6 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub6: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub4: 2 ports with 2 removable, self powered [...] uhub7: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus3 usbus7 [...] Root mount waiting for: usbus3 usbus7 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub5: 6 ports with 6 removable, self powered [...] ugen3.2: <vendor 0x1a40 USB 2.0 Hub> at usbus3 [...] uhub8 on uhub3 [...] uhub8: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 2> on usbus3 [...] Root mount waiting for: usbus3 [...] uhub8: 4 ports with 4 removable, self powered [...] ugen3.3: <Topping DX3 Pro+> at usbus3 [...] Root mount waiting for: usbus3 [...] ugen3.4: <Ducky Ducky Secret Optical Mouse> at usbus3 [...] ukbd0 on uhub8 [...] ukbd0: <Ducky Ducky Secret Optical Mouse, class 0/0, rev 2.00/0.32, addr 4> on usbus3 [...] kbd1 at ukbd0 [...] ugen3.5: <Apple, Inc. Keyboard Hub> at usbus3 [...] uhub9 on uhub8 [...] uhub9: <Apple, Inc. Keyboard Hub, class 9/0, rev 2.00/96.15, addr 5> on usbus3 [...] uhub9: 3 ports with 2 removable, bus powered [...] Root mount waiting for: usbus3 [...] ugen3.6: <Apple, Inc Apple Keyboard> at usbus3 [...] ukbd1 on uhub9 [...] ukbd1: <Apple, Inc Apple Keyboard, class 0/0, rev 2.00/0.71, addr 6> on usbus3 [...] kbd2 at ukbd1 [...] [drm] amdgpu kernel modesetting enabled. [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] initializing kernel modesetting (DIMGREY_CAVEFISH 0x1002:0x73FF 0x1002:0x0E3A 0xC1). [...] drmn0: Trusted Memory Zone (TMZ) feature not supported [...] [drm] register mmio base: 0x90600000 [...] [drm] register mmio size: 1048576 [...] [drm] add ip block number 0 <nv_common> [...] [drm] add ip block number 1 <gmc_v10_0> [...] [drm] add ip block number 2 <navi10_ih> [...] [drm] add ip block number 3 <psp> [...] [drm] add ip block number 4 <smu> [...] [drm] add ip block number 5 <dm> [...] [drm] add ip block number 6 <gfx_v10_0> [...] [drm] add ip block number 7 <sdma_v5_2> [...] [drm] add ip block number 8 <vcn_v3_0> [...] [drm] add ip block number 9 <jpeg_v3_0> [...] drmn0: Fetched VBIOS from VFCT [...] amdgpu: ATOM BIOS: 113-xxx-xxx [...] [drm] VCN(0) decode is enabled in VM mode [...] [drm] VCN(0) encode is enabled in VM mode [...] [drm] JPEG decode is enabled in VM mode [...] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [...] drmn0: VRAM: 8176M 0x0000008000000000 - 0x00000081FEFFFFFF (8176M used) [...] drmn0: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF [...] drmn0: AGP: 267894784M 0x0000008400000000 - 0x0000FFFFFFFFFFFF [...] [drm] Detected VRAM RAM=8176M, BAR=256M [...] [drm] RAM width 128bits GDDR6 [...] [drm] amdgpu: 8176M of VRAM memory ready [...] [drm] amdgpu: 8176M of GTT memory ready. [...] [drm] GART: num cpu pages 131072, num gpu pages 131072 [...] [drm] PCIE GART of 512M enabled (table at 0x0000008000E10000). [...] drmn0: successfully loaded firmware image 'amdgpu/dimgrey_cavefish_sos.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/dimgrey_cavefish_ta.bin' [...] drmn0: PSP runtime database doesn't exist [...] drmn0: successfully loaded firmware image 'amdgpu/dimgrey_cavefish_smc.bin' [...] lkpi_iic0: <LinuxKPI I2C> on drmn0 [...] iicbus0: <Philips I2C bus> on lkpi_iic0 [...] iic0: <I2C generic I/O> on iicbus0 [...] drmn0: successfully loaded firmware image 'amdgpu/dimgrey_cavefish_dmcub.bin' [...] [drm] Loading DMUB firmware via PSP: version=0x0202001E [...] drmn0: successfully loaded firmware image 'amdgpu/dimgrey_cavefish_pfp.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/dimgrey_cavefish_me.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/dimgrey_cavefish_ce.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/dimgrey_cavefish_rlc.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/dimgrey_cavefish_mec.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/dimgrey_cavefish_mec2.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/dimgrey_cavefish_sdma.bin' [...] [drm] use_doorbell being set to: [true] [...] [drm] use_doorbell being set to: [true] [...] drmn0: successfully loaded firmware image 'amdgpu/dimgrey_cavefish_vcn.bin' [...] [drm] Found VCN firmware Version ENC: 1.27 DEC: 2 VEP: 0 Revision: 0 [...] drmn0: Will use PSP to load VCN firmware [...] [drm] reserve 0xa00000 from 0x81fe000000 for PSP TMR [...] drmn0: RAS: optional ras ta ucode is not available [...] drmn0: SECUREDISPLAY: securedisplay ta ucode is not available [...] drmn0: smu driver if version = 0x0000000f, smu fw if version = 0x00000013, smu fw version = 0x003b2b00 (59.43.0) [...] drmn0: SMU driver if version not matched [...] drmn0: use vbios provided pptable [...] drmn0: SMU is initialized successfully! [...] [drm] Display Core initialized with v3.2.149! [...] [drm] DMUB hardware initialized: version=0x0202001E [...] lkpi_iic1: <LinuxKPI I2C> on drmn0 [...] iicbus1: <Philips I2C bus> on lkpi_iic1 [...] iic1: <I2C generic I/O> on iicbus1 [...] lkpi_iic2: <LinuxKPI I2C> on drmn0 [...] iicbus2: <Philips I2C bus> on lkpi_iic2 [...] iic2: <I2C generic I/O> on iicbus2 [...] lkpi_iic3: <LinuxKPI I2C> on drmn0 [...] iicbus3: <Philips I2C bus> on lkpi_iic3 [...] iic3: <I2C generic I/O> on iicbus3 [...] lkpi_iic4: <LinuxKPI I2C> on drmn0 [...] iicbus4: <Philips I2C bus> on lkpi_iic4 [...] iic4: <I2C generic I/O> on iicbus4 [...] [drm] kiq ring mec 2 pipe 1 q 0 [...] [drm] VCN decode and encode initialized successfully(under DPG Mode). [...] [drm] JPEG decode initialized successfully. [...] drmn0: SE 2, SH per SE 2, CU per SH 8, active_cu_number 32 [...] [drm] fb mappable at 0x810EC000 [...] [drm] vram apper at 0x80000000 [...] [drm] size 14745600 [...] [drm] fb depth is 24 [...] [drm] pitch is 10240 [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=1440 width=2560 depth=32 [...] pbase=0x810ec000 vbase=0xfffff800810ec000 [...] name=drmn0 flags=0x0 stride=10240 bpp=32 [...] end FB_INFO [...] drmn0: ring gfx_0.0.0 uses VM inv eng 0 on hub 0 [...] drmn0: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [...] drmn0: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [...] drmn0: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [...] drmn0: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [...] drmn0: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [...] drmn0: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [...] drmn0: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [...] drmn0: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [...] drmn0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0 [...] drmn0: ring sdma0 uses VM inv eng 12 on hub 0 [...] drmn0: ring sdma1 uses VM inv eng 13 on hub 0 [...] drmn0: ring vcn_dec_0 uses VM inv eng 0 on hub 1 [...] drmn0: ring vcn_enc_0.0 uses VM inv eng 1 on hub 1 [...] drmn0: ring vcn_enc_0.1 uses VM inv eng 4 on hub 1 [...] drmn0: ring jpeg_dec uses VM inv eng 5 on hub 1 [...] vgapci0: child drmn0 requested pci_get_powerstate [...] drmn0: Using BACO for runtime pm [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] lkpi_iic5: <LinuxKPI I2C> on drm1 [...] iicbus5: <Philips I2C bus> on lkpi_iic5 [...] iic5: <I2C generic I/O> on iicbus5 [...] lkpi_iic6: <LinuxKPI I2C> on drm2 [...] iicbus6: <Philips I2C bus> on lkpi_iic6 [...] iic6: <I2C generic I/O> on iicbus6 [...] lkpi_iic7: <LinuxKPI I2C> on drm3 [...] iicbus7: <Philips I2C bus> on lkpi_iic7 [...] iic7: <I2C generic I/O> on iicbus7 [...] [drm] Initialized amdgpu 3.42.0 20150101 for drmn0 on minor 0 [...] ugen2.2: <Apple Inc. BRCM2046 Hub> at usbus2 [...] uhub10 on uhub0 [...] uhub10: <Apple Inc. BRCM2046 Hub, class 9/0, rev 2.00/1.00, addr 2> on usbus2 [...] device_attach: ioapic0 attach returned 6 [...] device_attach: ioapic0 attach returned 6 [...] ioat0: <TBG IOAT Ch0> mem 0x90900000-0x90903fff at device 22.0 on pci0 [...] ioat0: Capabilities: 77<Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat1: <TBG IOAT Ch1> mem 0x90904000-0x90907fff at device 22.1 on pci0 [...] ioat1: Capabilities: 77<Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat2: <TBG IOAT Ch2> mem 0x90908000-0x9090bfff at device 22.2 on pci0 [...] ioat2: Capabilities: 77<Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat3: <TBG IOAT Ch3> mem 0x9090c000-0x9090ffff at device 22.3 on pci0 [...] ioat3: Capabilities: 77<Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat4: <TBG IOAT Ch4> mem 0x90910000-0x90913fff at device 22.4 on pci0 [...] ioat4: Capabilities: 77<Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat5: <TBG IOAT Ch5> mem 0x90914000-0x90917fff at device 22.5 on pci0 [...] ioat5: Capabilities: 77<Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat6: <TBG IOAT Ch6> mem 0x90918000-0x9091bfff at device 22.6 on pci0 [...] ioat6: Capabilities: 77<Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat7: <TBG IOAT Ch7> mem 0x9091c000-0x9091ffff at device 22.7 on pci0 [...] ioat7: Capabilities: 77<Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ichsmb0: <Intel 82801JI (ICH10) SMBus controller> port 0x4000-0x401f mem 0x90924000-0x909240ff at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] bwn_pci0: <Broadcom BCM4322 802.11n Dual-Band Wireless> mem 0x90200000-0x90203fff at device 0.0 on pci15 [...] bhndb0: <PCI-BHND bridge> on bwn_pci0 [...] bhndb0: Using MSI interrupts on bwn_pci0 [...] bhnd_nvram0: <SPROM/OTP> mem 0x90201000-0x90201fff on bhndb0 [...] bhnd0: <BCM4322 SIBA bus> on bhndb0 [...] bhnd_chipc0: <Broadcom ChipCommon I/O Controller, rev 23> mem 0x18000000-0x18000dff,0xffff0000-0xffffffff,0x1c000000-0x1dffffff,0x18000f00-0x18000fff,0x18000e00-0x18000eff irq 0 at core 0 on bhnd0 [...] bhnd_pmu0: <Broadcom ChipCommon PMU, rev 2> on bhnd_chipc0 [...] gpio0: <Broadcom ChipCommon GPIO> mem 0x18000000-0x18000dff on bhnd_chipc0 [...] bhnd_hostb0: <Broadcom PCIe-G1 Host-PCI bridge, rev 11> mem 0x18002000-0x18002dff,0-0x7fffffff,0x18002f00-0x18002fff,0x18002e00-0x18002eff irq 2 at core 2 on bhnd0 [...] bhnd0: <Broadcom Internal Memory, rev 3> mem 0x18006000-0x18006dff,0x1e000000-0x1e01ffff,0x18006f00-0x18006fff,0x18006e00-0x18006eff at core 6 (no driver attached) [...] bhnd0: <Broadcom unknown, rev 0> mem 0x18005000-0x18005dff,0x18005f00-0x18005fff,0x18005e00-0x18005eff irq 5 at core 5 (no driver attached) [...] bwn0: <Broadcom 802.11 MAC/PHY/Radio, rev 16> mem 0x18001000-0x18001dff,0x18001f00-0x18001fff,0x18001e00-0x18001eff irq 1 at core 1 on bhnd0 [...] bwn0: bwn_phy_n_attach: BWN_GPL_PHY not in kernel config; no PHY-N support [...] bwn0: failed [...] device_attach: bwn0 attach returned 6 [...] bhnd0: <Broadcom USB 2.0 Device Controller, rev 5> mem 0x18004000-0x18004dff,0x18004f00-0x18004fff,0x18004e00-0x18004eff irq 4 at core 4 (no driver attached) [...] device_attach: ioapic0 attach returned 6 [...] device_attach: ioapic0 attach returned 6 [...] device_attach: ioapic0 attach returned 6 [...] device_attach: ioapic0 attach returned 6 [...] bwn0: <Broadcom 802.11 MAC/PHY/Radio, rev 16> mem 0x18001000-0x18001dff,0x18001f00-0x18001fff,0x18001e00-0x18001eff irq 1 at core 1 on bhnd0 [...] bwn0: bwn_phy_n_attach: BWN_GPL_PHY not in kernel config; no PHY-N support [...] bwn0: failed [...] device_attach: bwn0 attach returned 6 [...] bwn0: <Broadcom 802.11 MAC/PHY/Radio, rev 16> mem 0x18001000-0x18001dff,0x18001f00-0x18001fff,0x18001e00-0x18001eff irq 1 at core 1 on bhnd0 [...] bwn0: bwn_phy_n_attach: BWN_GPL_PHY not in kernel config; no PHY-N support [...] bwn0: failed [...] device_attach: bwn0 attach returned 6 [...] bwn0: <Broadcom 802.11 MAC/PHY/Radio, rev 16> mem 0x18001000-0x18001dff,0x18001f00-0x18001fff,0x18001e00-0x18001eff irq 1 at core 1 on bhnd0 [...] bwn0: bwn_phy_n_attach: BWN_GPL_PHY not in kernel config; no PHY-N support [...] bwn0: failed [...] device_attach: bwn0 attach returned 6 [...] bwn0: <Broadcom 802.11 MAC/PHY/Radio, rev 16> mem 0x18001000-0x18001dff,0x18001f00-0x18001fff,0x18001e00-0x18001eff irq 1 at core 1 on bhnd0 [...] uhub10: 3 ports with 0 removable, self powered [...] bwn0: bwn_phy_n_attach: BWN_GPL_PHY not in kernel config; no PHY-N support [...] bwn0: failed [...] device_attach: bwn0 attach returned 6 [...] bwn0: <Broadcom 802.11 MAC/PHY/Radio, rev 16> mem 0x18001000-0x18001dff,0x18001f00-0x18001fff,0x18001e00-0x18001eff irq 1 at core 1 on bhnd0 [...] bwn0: bwn_phy_n_attach: BWN_GPL_PHY not in kernel config; no PHY-N support [...] bwn0: failed [...] device_attach: bwn0 attach returned 6 [...] em0: link state changed to UP [...] lo0: link state changed to UP [...] ugen2.3: <Apple Inc. Bluetooth USB Host Controller> at usbus2 [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] uaudio0 on uhub8 [...] uaudio0: <Topping DX3 Pro+, class 239/2, rev 2.00/1.25, addr 3> on usbus3 [...] uaudio0: Play[0]: 384000 Hz, 2 ch, 32-bit S-LE PCM format, 2x4ms buffer. (selected) [...] uaudio0: Play[0]: 352800 Hz, 2 ch, 32-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Play[0]: 192000 Hz, 2 ch, 32-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Play[0]: 176400 Hz, 2 ch, 32-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Play[0]: 96000 Hz, 2 ch, 32-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Play[0]: 88200 Hz, 2 ch, 32-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Play[0]: 48000 Hz, 2 ch, 32-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Play[0]: 44100 Hz, 2 ch, 32-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: No recording. [...] uaudio0: No MIDI sequencer. [...] pcm9 on uaudio0 [...] uaudio0: No HID volume keys found. [...] ums0 on uhub8 [...] ums0: <Ducky Ducky Secret Optical Mouse, class 0/0, rev 2.00/0.32, addr 4> on usbus3 [...] ums0: 5 buttons and [XYZT] coordinates ID=1 [...] uhid0 on uhub8 [...] uhid0: <Ducky Ducky Secret Optical Mouse, class 0/0, rev 2.00/0.32, addr 4> on usbus3 [...] uhid1 on uhub9 [...] uhid1: <Apple, Inc Apple Keyboard, class 0/0, rev 2.00/0.71, addr 6> on usbus3 [...] ubt0 on uhub10 [...] ubt0: <Apple Inc. Bluetooth USB Host Controller, rev 2.00/2.08, addr 3> on usbus2