[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248075-469123a60d1 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Pentium(R) Dual-Core CPU E6600 @ 3.06GHz (3066.79-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x1067a Family=0x6 Model=0x17 Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0xc00e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE,OSXSAVE> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] VT-x: HLT,PAUSE [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 4072443904 (3883 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <7592MS A7592400> [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] aesni0: No AES or SHA support. [...] acpi0: <7592MS A7592400> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <PCI-PCI bridge> irq 16 at device 0.0 on pci1 [...] pci2: <PCI bus> on pcib2 [...] pcib3: <PCI-PCI bridge> irq 19 at device 3.0 on pci2 [...] pci3: <PCI bus> on pcib3 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xb800-0xb8ff mem 0xfe7ff000-0xfe7fffff,0xfdefc000-0xfdefffff irq 19 at device 0.0 on pci3 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x4c000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib4: <PCI-PCI bridge> irq 19 at device 7.0 on pci2 [...] pci4: <PCI bus> on pcib4 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xc800-0xc8ff mem 0xfe8ff000-0xfe8fffff,0xfdffc000-0xfdffffff irq 19 at device 0.0 on pci4 [...] re1: Using 1 MSI-X message [...] re1: Chip rev. 0x4c000000 [...] re1: MAC rev. 0x00000000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] vgapci0: <VGA-compatible display> port 0xac00-0xac07 mem 0xfe000000-0xfe3fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 [...] agp0: <Intel G41 SVGA controller> on vgapci0 [...] WARNING: Device "agp" is Giant locked and may be deleted before FreeBSD 14.0. [...] agp0: aperture size is 256M, detected 32764k stolen memory [...] vgapci0: Boot video device [...] hdac0: <Intel 82801G HDA Controller> mem 0xfe6f8000-0xfe6fbfff irq 16 at device 27.0 on pci0 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci5: <ACPI PCI bus> on pcib6 [...] alc0: <Atheros AR8132 PCIe Fast Ethernet> port 0xdc00-0xdc7f mem 0xfe9c0000-0xfe9fffff irq 17 at device 0.0 on pci5 [...] alc0: 15872 Tx FIFO, 15360 Rx FIFO [...] alc0: Using 1 MSI message(s). [...] miibus2: <MII bus> on alc0 [...] atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus2 [...] atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow [...] alc0: Using defaults for TSO: 65518/35/2048 [...] alc0: Ethernet address: ... [...] pcib7: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xa880-0xa89f irq 23 at device 29.0 on pci0 [...] uhci0: LegSup = 0x2f00 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xa800-0xa81f irq 19 at device 29.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xa480-0xa49f irq 18 at device 29.2 on pci0 [...] uhci2: LegSup = 0x2f00 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xa400-0xa41f irq 16 at device 29.3 on pci0 [...] uhci3: LegSup = 0x2f00 [...] usbus3 on uhci3 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe6f7c00-0xfe6f7fff irq 23 at device 29.7 on pci0 [...] usbus4: EHCI version 1.0 [...] usbus4 on ehci0 [...] usbus4: 480Mbps High Speed USB v2.0 [...] pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib8 [...] pci6: <network, ethernet> at device 1.0 (no driver attached) [...] pci6: <network, ethernet> at device 1.1 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] atapci1: <Intel ICH7 SATA300 controller> port 0xa080-0xa087,0xa000-0xa003,0x9c00-0x9c07,0x9880-0x9883,0x9800-0x980f irq 19 at device 31.2 on pci0 [...] ata2: <ATA channel> at channel 0 on atapci1 [...] ata3: <ATA channel> at channel 1 on atapci1 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 [...] ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc0 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcc7ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1533315553 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <VIA VT1708S_0 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <VIA VT1708S_0 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <VIA VT1708S_0 (Analog 2.0+HP/2.0)> at nid 28,29 and 26,30,31,27 on hdaa0 [...] pcm1: <VIA VT1708S_0 (Rear-panel Digital)> at nid 32 on hdaa0 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] ugen3.1: <Intel UHCI root HUB> at usbus3 [...] uhub0 on usbus0 [...] uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus3 [...] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] uhub2 on usbus1 [...] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] ugen4.1: <Intel EHCI root HUB> at usbus4 [...] uhub3 on usbus4 [...] uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] uhub4 on usbus2 [...] uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] Root mount waiting for: usbus0 usbus1 usbus2 usbus3 usbus4 CAM [...] uhub4: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus4 CAM [...] Root mount waiting for: usbus4 CAM [...] ada0 at ata2 bus 0 scbus1 target 1 lun 0 [...] ada0: <ST380811AS 3.AAE> ATA-7 SATA 1.x device [...] ada0: Serial Number... [...] ada0: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) [...] ada0: 76319MB (156301488 512 byte sectors) [...] Root mount waiting for: usbus4 [...] uhub3: 8 ports with 8 removable, self powered [...] mountroot: waiting for device /dev/gpt/rootfs... [...] re0: link state changed to UP [...] re1: link state changed to UP [...] ichsmb0: <Intel 82801GB (ICH7) SMBus controller> port 0x400-0x41f irq 19 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] re0: link state changed to DOWN [...] alc0: link state changed to DOWN [...] re1: link state changed to DOWN [...] re0: link state changed to UP [...] alc0: link state changed to UP [...] re1: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] load_dn_sched dn_sched FIFO loaded [...] load_dn_sched dn_sched QFQ loaded [...] load_dn_sched dn_sched RR loaded [...] load_dn_sched dn_sched WF2Q+ loaded [...] load_dn_sched dn_sched PRIO loaded [...] load_dn_sched dn_sched FQ_CODEL loaded [...] load_dn_sched dn_sched FQ_PIE loaded [...] load_dn_aqm dn_aqm CODEL loaded [...] load_dn_aqm dn_aqm PIE loaded [...] ugen4.2: <vendor 0x1a40 USB 2.0 Hub> at usbus4 [...] uhub5 on uhub3 [...] uhub5: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 2> on usbus4 [...] uhub5: 4 ports with 4 removable, self powered [...] ugen4.3: <SEM USB Keyboard> at usbus4 [...] ukbd0 on uhub5 [...] ukbd0: <SEM USB Keyboard, class 0/0, rev 1.10/1.10, addr 3> on usbus4 [...] kbd2 at ukbd0 [...] ugen4.4: <SIGMACHIP Usb Mouse> at usbus4 [...] uhid0 on uhub5 [...] uhid0: <SEM USB Keyboard, class 0/0, rev 1.10/1.10, addr 3> on usbus4 [...] ums0 on uhub5 [...] ums0: <SIGMACHIP Usb Mouse, class 0/0, rev 1.10/1.10, addr 4> on usbus4 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] ugen4.2: <vendor 0x1a40 USB 2.0 Hub> at usbus4 (disconnected) [...] uhub5: at uhub3, port 1, addr 2 (disconnected) [...] ugen4.3: <SEM USB Keyboard> at usbus4 (disconnected) [...] ukbd0: at uhub5, port 1, addr 3 (disconnected) [...] ukbd0: detached [...] uhid0: at uhub5, port 1, addr 3 (disconnected) [...] uhid0: detached [...] ugen4.4: <SIGMACHIP Usb Mouse> at usbus4 (disconnected) [...] ums0: at uhub5, port 2, addr 4 (disconnected) [...] ums0: detached [...] uhub5: detached [...] ugen4.2: <vendor 0x1a40 USB 2.0 Hub> at usbus4 [...] uhub5 on uhub3 [...] uhub5: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 2> on usbus4 [...] uhub5: 4 ports with 4 removable, self powered [...] ugen4.3: <SEM USB Keyboard> at usbus4 [...] ukbd0 on uhub5 [...] ukbd0: <SEM USB Keyboard, class 0/0, rev 1.10/1.10, addr 3> on usbus4 [...] kbd2 at ukbd0 [...] uhid0 on uhub5 [...] uhid0: <SEM USB Keyboard, class 0/0, rev 1.10/1.10, addr 3> on usbus4 [...] ugen4.4: <SIGMACHIP Usb Mouse> at usbus4 [...] ums0 on uhub5 [...] ums0: <SIGMACHIP Usb Mouse, class 0/0, rev 1.10/1.10, addr 4> on usbus4 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] ugen4.2: <vendor 0x1a40 USB 2.0 Hub> at usbus4 (disconnected) [...] uhub5: at uhub3, port 1, addr 2 (disconnected) [...] ugen4.3: <SEM USB Keyboard> at usbus4 (disconnected) [...] ukbd0: at uhub5, port 1, addr 3 (disconnected) [...] ukbd0: detached [...] uhid0: at uhub5, port 1, addr 3 (disconnected) [...] uhid0: detached [...] ugen4.4: <SIGMACHIP Usb Mouse> at usbus4 (disconnected) [...] ums0: at uhub5, port 2, addr 4 (disconnected) [...] ums0: detached [...] uhub5: detached [...] re1: watchdog timeout [...] re1: link state changed to DOWN [...] re1: link state changed to UP [...] re1: watchdog timeout [...] re1: link state changed to DOWN [...] re1: link state changed to UP [...] re0: watchdog timeout [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] [...] Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 4 3 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] All buffers synced. [...] Uptime: 17h4m41s [...] uhub3: detached [...] uhub1: detached [...] uhub4: detached [...] uhub2: detached [...] uhub0: detached [...] re1: link state changed to DOWN [...] re1: link state changed to UP [...] re0: link state changed to DOWN [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248075-469123a60d1 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Pentium(R) Dual-Core CPU E6600 @ 3.06GHz (3066.78-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x1067a Family=0x6 Model=0x17 Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0xc00e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE,OSXSAVE> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] VT-x: HLT,PAUSE [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 4072443904 (3883 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <7592MS A7592400> [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] aesni0: No AES or SHA support. [...] acpi0: <7592MS A7592400> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <PCI-PCI bridge> irq 16 at device 0.0 on pci1 [...] pci2: <PCI bus> on pcib2 [...] pcib3: <PCI-PCI bridge> irq 19 at device 3.0 on pci2 [...] pci3: <PCI bus> on pcib3 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xb800-0xb8ff mem 0xfe7ff000-0xfe7fffff,0xfdefc000-0xfdefffff irq 19 at device 0.0 on pci3 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x4c000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib4: <PCI-PCI bridge> irq 19 at device 7.0 on pci2 [...] pci4: <PCI bus> on pcib4 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xc800-0xc8ff mem 0xfe8ff000-0xfe8fffff,0xfdffc000-0xfdffffff irq 19 at device 0.0 on pci4 [...] re1: Using 1 MSI-X message [...] re1: Chip rev. 0x4c000000 [...] re1: MAC rev. 0x00000000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] vgapci0: <VGA-compatible display> port 0xac00-0xac07 mem 0xfe000000-0xfe3fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 [...] agp0: <Intel G41 SVGA controller> on vgapci0 [...] WARNING: Device "agp" is Giant locked and may be deleted before FreeBSD 14.0. [...] agp0: aperture size is 256M, detected 32764k stolen memory [...] vgapci0: Boot video device [...] hdac0: <Intel 82801G HDA Controller> mem 0xfe6f8000-0xfe6fbfff irq 16 at device 27.0 on pci0 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci5: <ACPI PCI bus> on pcib6 [...] alc0: <Atheros AR8132 PCIe Fast Ethernet> port 0xdc00-0xdc7f mem 0xfe9c0000-0xfe9fffff irq 17 at device 0.0 on pci5 [...] alc0: 15872 Tx FIFO, 15360 Rx FIFO [...] alc0: Using 1 MSI message(s). [...] miibus2: <MII bus> on alc0 [...] atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus2 [...] atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow [...] alc0: Using defaults for TSO: 65518/35/2048 [...] alc0: Ethernet address: ... [...] pcib7: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xa880-0xa89f irq 23 at device 29.0 on pci0 [...] uhci0: LegSup = 0x2f00 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xa800-0xa81f irq 19 at device 29.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xa480-0xa49f irq 18 at device 29.2 on pci0 [...] uhci2: LegSup = 0x2f00 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xa400-0xa41f irq 16 at device 29.3 on pci0 [...] uhci3: LegSup = 0x2f00 [...] usbus3 on uhci3 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe6f7c00-0xfe6f7fff irq 23 at device 29.7 on pci0 [...] usbus4: EHCI version 1.0 [...] usbus4 on ehci0 [...] usbus4: 480Mbps High Speed USB v2.0 [...] pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib8 [...] pci6: <network, ethernet> at device 1.0 (no driver attached) [...] pci6: <network, ethernet> at device 1.1 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] atapci1: <Intel ICH7 SATA300 controller> port 0xa080-0xa087,0xa000-0xa003,0x9c00-0x9c07,0x9880-0x9883,0x9800-0x980f irq 19 at device 31.2 on pci0 [...] ata2: <ATA channel> at channel 0 on atapci1 [...] ata3: <ATA channel> at channel 1 on atapci1 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 [...] ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc0 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcc7ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1533315755 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <VIA VT1708S_0 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <VIA VT1708S_0 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <VIA VT1708S_0 (Analog 2.0+HP/2.0)> at nid 28,29 and 26,30,31,27 on hdaa0 [...] pcm1: <VIA VT1708S_0 (Rear-panel Digital)> at nid 32 on hdaa0 [...] ugen3.1: <Intel UHCI root HUB> at usbus3 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] uhub0 on usbus3 [...] uhub1 on usbus0 [...] uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] ugen4.1: <Intel EHCI root HUB> at usbus4 [...] uhub2 on usbus1 [...] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub3 on usbus4 [...] uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] uhub4 on usbus2 [...] uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] Root mount waiting for: usbus0 usbus1 usbus2 usbus3 usbus4 CAM [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub4: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus4 CAM [...] ada0 at ata2 bus 0 scbus1 target 1 lun 0 [...] ada0: <ST380811AS 3.AAE> ATA-7 SATA 1.x device [...] ada0: Serial Number... [...] ada0: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) [...] ada0: 76319MB (156301488 512 byte sectors) [...] Root mount waiting for: usbus4 [...] Root mount waiting for: usbus4 [...] uhub3: 8 ports with 8 removable, self powered [...] mountroot: waiting for device /dev/gpt/rootfs... [...] re0: link state changed to UP [...] re1: link state changed to UP [...] ichsmb0: <Intel 82801GB (ICH7) SMBus controller> port 0x400-0x41f irq 19 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] re0: link state changed to DOWN [...] alc0: link state changed to DOWN [...] re1: link state changed to DOWN [...] alc0: link state changed to UP [...] re0: link state changed to UP [...] re1: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] load_dn_sched dn_sched FIFO loaded [...] load_dn_sched dn_sched QFQ loaded [...] load_dn_sched dn_sched RR loaded [...] load_dn_sched dn_sched WF2Q+ loaded [...] load_dn_sched dn_sched PRIO loaded [...] load_dn_sched dn_sched FQ_CODEL loaded [...] load_dn_sched dn_sched FQ_PIE loaded [...] load_dn_aqm dn_aqm CODEL loaded [...] load_dn_aqm dn_aqm PIE loaded [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 5 1 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] All buffers synced. [...] Uptime: 9m27s [...] uhub3: detached [...] uhub0: detached [...] uhub4: detached [...] uhub2: detached [...] uhub1: detached [...] re1: link state changed to DOWN [...] re1: link state changed to UP [...] re0: link state changed to DOWN [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248075-469123a60d1 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Pentium(R) Dual-Core CPU E6600 @ 3.06GHz (3066.74-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x1067a Family=0x6 Model=0x17 Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0xc00e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE,OSXSAVE> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] VT-x: HLT,PAUSE [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 4072443904 (3883 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <7592MS A7592400> [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] aesni0: No AES or SHA support. [...] acpi0: <7592MS A7592400> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <PCI-PCI bridge> irq 16 at device 0.0 on pci1 [...] pci2: <PCI bus> on pcib2 [...] pcib3: <PCI-PCI bridge> irq 19 at device 3.0 on pci2 [...] pci3: <PCI bus> on pcib3 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xb800-0xb8ff mem 0xfe7ff000-0xfe7fffff,0xfdefc000-0xfdefffff irq 19 at device 0.0 on pci3 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x4c000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib4: <PCI-PCI bridge> irq 19 at device 7.0 on pci2 [...] pci4: <PCI bus> on pcib4 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xc800-0xc8ff mem 0xfe8ff000-0xfe8fffff,0xfdffc000-0xfdffffff irq 19 at device 0.0 on pci4 [...] re1: Using 1 MSI-X message [...] re1: Chip rev. 0x4c000000 [...] re1: MAC rev. 0x00000000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] vgapci0: <VGA-compatible display> port 0xac00-0xac07 mem 0xfe000000-0xfe3fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 [...] agp0: <Intel G41 SVGA controller> on vgapci0 [...] WARNING: Device "agp" is Giant locked and may be deleted before FreeBSD 14.0. [...] agp0: aperture size is 256M, detected 32764k stolen memory [...] vgapci0: Boot video device [...] hdac0: <Intel 82801G HDA Controller> mem 0xfe6f8000-0xfe6fbfff irq 16 at device 27.0 on pci0 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci5: <ACPI PCI bus> on pcib6 [...] alc0: <Atheros AR8132 PCIe Fast Ethernet> port 0xdc00-0xdc7f mem 0xfe9c0000-0xfe9fffff irq 17 at device 0.0 on pci5 [...] alc0: 15872 Tx FIFO, 15360 Rx FIFO [...] alc0: Using 1 MSI message(s). [...] miibus2: <MII bus> on alc0 [...] atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus2 [...] atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow [...] alc0: Using defaults for TSO: 65518/35/2048 [...] alc0: Ethernet address: ... [...] pcib7: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xa880-0xa89f irq 23 at device 29.0 on pci0 [...] uhci0: LegSup = 0x2f00 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xa800-0xa81f irq 19 at device 29.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xa480-0xa49f irq 18 at device 29.2 on pci0 [...] uhci2: LegSup = 0x2f00 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xa400-0xa41f irq 16 at device 29.3 on pci0 [...] uhci3: LegSup = 0x2f00 [...] usbus3 on uhci3 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe6f7c00-0xfe6f7fff irq 23 at device 29.7 on pci0 [...] usbus4: EHCI version 1.0 [...] usbus4 on ehci0 [...] usbus4: 480Mbps High Speed USB v2.0 [...] pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib8 [...] pci6: <network, ethernet> at device 1.0 (no driver attached) [...] pci6: <network, ethernet> at device 1.1 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] atapci1: <Intel ICH7 SATA300 controller> port 0xa080-0xa087,0xa000-0xa003,0x9c00-0x9c07,0x9880-0x9883,0x9800-0x980f irq 19 at device 31.2 on pci0 [...] ata2: <ATA channel> at channel 0 on atapci1 [...] ata3: <ATA channel> at channel 1 on atapci1 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 [...] ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc0 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcc7ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1533315456 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <VIA VT1708S_0 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <VIA VT1708S_0 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <VIA VT1708S_0 (Analog 2.0+HP/2.0)> at nid 28,29 and 26,30,31,27 on hdaa0 [...] pcm1: <VIA VT1708S_0 (Rear-panel Digital)> at nid 32 on hdaa0 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] ugen3.1: <Intel UHCI root HUB> at usbus3 [...] uhub0 on usbus3 [...] uhub1 on usbus0 [...] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] ugen4.1: <Intel EHCI root HUB> at usbus4 [...] uhub2 on usbus1 [...] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub3 on usbus4 [...] uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] uhub4 on usbus2 [...] uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] Root mount waiting for: usbus0 usbus1 usbus2 usbus3 usbus4 CAM [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub4: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus4 CAM [...] Root mount waiting for: usbus4 CAM [...] ada0 at ata2 bus 0 scbus1 target 1 lun 0 [...] ada0: <ST380811AS 3.AAE> ATA-7 SATA 1.x device [...] ada0: Serial Number... [...] ada0: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) [...] ada0: 76319MB (156301488 512 byte sectors) [...] Root mount waiting for: usbus4 [...] uhub3: 8 ports with 8 removable, self powered [...] mountroot: waiting for device /dev/gpt/rootfs... [...] re0: link state changed to UP [...] re1: link state changed to UP [...] ichsmb0: <Intel 82801GB (ICH7) SMBus controller> port 0x400-0x41f irq 19 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] re0: link state changed to DOWN [...] alc0: link state changed to DOWN [...] re1: link state changed to DOWN [...] alc0: link state changed to UP [...] re0: link state changed to UP [...] re1: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] load_dn_sched dn_sched FIFO loaded [...] load_dn_sched dn_sched QFQ loaded [...] load_dn_sched dn_sched RR loaded [...] load_dn_sched dn_sched WF2Q+ loaded [...] load_dn_sched dn_sched PRIO loaded [...] load_dn_sched dn_sched FQ_CODEL loaded [...] load_dn_sched dn_sched FQ_PIE loaded [...] load_dn_aqm dn_aqm CODEL loaded [...] load_dn_aqm dn_aqm PIE loaded [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 4 3 1 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] All buffers synced. [...] Uptime: 16m55s [...] uhub3: detached [...] uhub0: detached [...] uhub4: detached [...] uhub2: detached [...] uhub1: detached [...] re1: link state changed to DOWN [...] re1: link state changed to UP [...] re0: link state changed to DOWN [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248075-469123a60d1 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Pentium(R) Dual-Core CPU E6600 @ 3.06GHz (3066.72-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x1067a Family=0x6 Model=0x17 Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0xc00e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE,OSXSAVE> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] VT-x: HLT,PAUSE [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 4072443904 (3883 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <7592MS A7592400> [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] aesni0: No AES or SHA support. [...] acpi0: <7592MS A7592400> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <PCI-PCI bridge> irq 16 at device 0.0 on pci1 [...] pci2: <PCI bus> on pcib2 [...] pcib3: <PCI-PCI bridge> irq 19 at device 3.0 on pci2 [...] pci3: <PCI bus> on pcib3 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xb800-0xb8ff mem 0xfe7ff000-0xfe7fffff,0xfdefc000-0xfdefffff irq 19 at device 0.0 on pci3 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x4c000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib4: <PCI-PCI bridge> irq 19 at device 7.0 on pci2 [...] pci4: <PCI bus> on pcib4 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xc800-0xc8ff mem 0xfe8ff000-0xfe8fffff,0xfdffc000-0xfdffffff irq 19 at device 0.0 on pci4 [...] re1: Using 1 MSI-X message [...] re1: Chip rev. 0x4c000000 [...] re1: MAC rev. 0x00000000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] vgapci0: <VGA-compatible display> port 0xac00-0xac07 mem 0xfe000000-0xfe3fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 [...] agp0: <Intel G41 SVGA controller> on vgapci0 [...] WARNING: Device "agp" is Giant locked and may be deleted before FreeBSD 14.0. [...] agp0: aperture size is 256M, detected 32764k stolen memory [...] vgapci0: Boot video device [...] hdac0: <Intel 82801G HDA Controller> mem 0xfe6f8000-0xfe6fbfff irq 16 at device 27.0 on pci0 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci5: <ACPI PCI bus> on pcib6 [...] alc0: <Atheros AR8132 PCIe Fast Ethernet> port 0xdc00-0xdc7f mem 0xfe9c0000-0xfe9fffff irq 17 at device 0.0 on pci5 [...] alc0: 15872 Tx FIFO, 15360 Rx FIFO [...] alc0: Using 1 MSI message(s). [...] miibus2: <MII bus> on alc0 [...] atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus2 [...] atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow [...] alc0: Using defaults for TSO: 65518/35/2048 [...] alc0: Ethernet address: ... [...] pcib7: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xa880-0xa89f irq 23 at device 29.0 on pci0 [...] uhci0: LegSup = 0x2f00 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xa800-0xa81f irq 19 at device 29.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xa480-0xa49f irq 18 at device 29.2 on pci0 [...] uhci2: LegSup = 0x2f00 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xa400-0xa41f irq 16 at device 29.3 on pci0 [...] uhci3: LegSup = 0x2f00 [...] usbus3 on uhci3 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe6f7c00-0xfe6f7fff irq 23 at device 29.7 on pci0 [...] usbus4: EHCI version 1.0 [...] usbus4 on ehci0 [...] usbus4: 480Mbps High Speed USB v2.0 [...] pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib8 [...] pci6: <network, ethernet> at device 1.0 (no driver attached) [...] pci6: <network, ethernet> at device 1.1 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] atapci1: <Intel ICH7 SATA300 controller> port 0xa080-0xa087,0xa000-0xa003,0x9c00-0x9c07,0x9880-0x9883,0x9800-0x980f irq 19 at device 31.2 on pci0 [...] ata2: <ATA channel> at channel 0 on atapci1 [...] ata3: <ATA channel> at channel 1 on atapci1 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 [...] ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc0 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcc7ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1533315552 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <VIA VT1708S_0 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <VIA VT1708S_0 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <VIA VT1708S_0 (Analog 2.0+HP/2.0)> at nid 28,29 and 26,30,31,27 on hdaa0 [...] pcm1: <VIA VT1708S_0 (Rear-panel Digital)> at nid 32 on hdaa0 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] ugen3.1: <Intel UHCI root HUB> at usbus3 [...] uhub0 on usbus3 [...] uhub1 on usbus0 [...] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] ugen4.1: <Intel EHCI root HUB> at usbus4 [...] uhub2 on usbus1 [...] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub3 on usbus4 [...] uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] uhub4 on usbus2 [...] uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] Root mount waiting for: usbus0 usbus1 usbus2 usbus3 usbus4 CAM [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub4: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus4 CAM [...] Root mount waiting for: usbus4 CAM [...] ada0 at ata2 bus 0 scbus1 target 1 lun 0 [...] ada0: <ST380811AS 3.AAE> ATA-7 SATA 1.x device [...] ada0: Serial Number... [...] ada0: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) [...] ada0: 76319MB (156301488 512 byte sectors) [...] Root mount waiting for: usbus4 [...] uhub3: 8 ports with 8 removable, self powered [...] mountroot: waiting for device /dev/gpt/rootfs...