[...] ubt0: at uhub2, port 3, addr 3 (disconnected) [...] ubt0: detached [...] ugen1.4: <CN0FHKK7724875CBCG1ZA00 IntegratedWebcamHD> at usbus1 (disconnected) [...] ugen1.5: <Broadcom Corp 5880> at usbus1 (disconnected) [...] uhub2: detached [...] uhub0: detached [...] wlan0: link state changed to DOWN [...] uhub1: at usbus0, port 1, addr 1 (disconnected) [...] ugen0.2: <Microsoft Microsoft Nano Transceiver 1.1> at usbus0 (disconnected) [...] ukbd0: at uhub1, port 4, addr 1 (disconnected) [...] ukbd0: detached [...] uhid0: at uhub1, port 4, addr 1 (disconnected) [...] uhid0: detached [...] ums0: at uhub1, port 4, addr 1 (disconnected) [...] ums0: detached [...] uhub1: detached [...] vgapci0: child drmn0 requested pci_set_powerstate [...] pci2: unknown notify 0x2 [...] acpi0: cleared fixed power button status [...] vgapci0: child drmn0 requested pci_set_powerstate [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] xhci0: Port routing mask set to 0xffffffff [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub0: 15 ports with 15 removable, self powered [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ugen0.2: <Microsoft Microsoft Nano Transceiver 1.1> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Microsoft Microsoft Nano Transceiver 1.1, class 0/0, rev 2.00/3.15, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] uhid0 on uhub0 [...] uhid0: <Microsoft Microsoft Nano Transceiver 1.1, class 0/0, rev 2.00/3.15, addr 1> on usbus0 [...] ums0 on uhub0 [...] ums0: <Microsoft Microsoft Nano Transceiver 1.1, class 0/0, rev 2.00/3.15, addr 1> on usbus0 [...] ums0: 5 buttons and [XYZ] coordinates ID=0 [...] uhub1: 3 ports with 3 removable, self powered [...] wlan0: link state changed to UP [...] ugen1.2: <vendor 0x8087 product 0x8001> at usbus1 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.03, addr 2> on usbus1 [...] uhub2: 8 ports with 8 removable, self powered [...] ugen1.3: <vendor 0x8087 product 0x0a2a> at usbus1 [...] ubt0 on uhub2 [...] ubt0: <vendor 0x8087 product 0x0a2a, class 224/1, rev 2.01/0.01, addr 3> on usbus1 [...] ugen1.4: <CN0FHKK7724875CBCG1ZA00 IntegratedWebcamHD> at usbus1 [...] usbd_set_config_index: could not read device status: USB_ERR_STALLED [...] ugen1.5: <Broadcom Corp 5880> at usbus1 [...] ubt0: ubt_ctrl_write_callback:906: control transfer failed: USB_ERR_TIMEOUT [...] ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3, OCF=0x3. Timeout [...] uhub1: at usbus1, port 1, addr 1 (disconnected) [...] ugen1.2: <vendor 0x8087 product 0x8001> at usbus1 (disconnected) [...] uhub2: at uhub1, port 1, addr 2 (disconnected) [...] ugen1.3: <vendor 0x8087 product 0x0a2a> at usbus1 (disconnected) [...] ubt0: at uhub2, port 3, addr 3 (disconnected) [...] ubt0: detached [...] ugen1.4: <CN0FHKK7724875CBCG1ZA00 IntegratedWebcamHD> at usbus1 (disconnected) [...] ugen1.5: <Broadcom Corp 5880> at usbus1 (disconnected) [...] uhub2: detached [...] uhub1: detached [...] wlan0: link state changed to DOWN [...] uhub0: at usbus0, port 1, addr 1 (disconnected) [...] ugen0.2: <Microsoft Microsoft Nano Transceiver 1.1> at usbus0 (disconnected) [...] ukbd0: at uhub0, port 4, addr 1 (disconnected) [...] ukbd0: detached [...] uhid0: at uhub0, port 4, addr 1 (disconnected) [...] uhid0: detached [...] ums0: at uhub0, port 4, addr 1 (disconnected) [...] ums0: detached [...] uhub0: detached [...] vgapci0: child drmn0 requested pci_set_powerstate [...] i915 raw-wakerefs=3 wakelocks=3 on cleanup [...] pci2: unknown notify 0x2 [...] acpi0: cleared fixed power button status [...] vgapci0: child drmn0 requested pci_set_powerstate [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] xhci0: Port routing mask set to 0xffffffff [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub0: 15 ports with 15 removable, self powered [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ugen0.2: <Microsoft Microsoft Nano Transceiver 1.1> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Microsoft Microsoft Nano Transceiver 1.1, class 0/0, rev 2.00/3.15, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] uhid0 on uhub0 [...] uhid0: <Microsoft Microsoft Nano Transceiver 1.1, class 0/0, rev 2.00/3.15, addr 1> on usbus0 [...] ums0 on uhub0 [...] ums0: <Microsoft Microsoft Nano Transceiver 1.1, class 0/0, rev 2.00/3.15, addr 1> on usbus0 [...] ums0: 5 buttons and [XYZ] coordinates ID=0 [...] uhub1: 3 ports with 3 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x8001> at usbus1 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.03, addr 2> on usbus1 [...] uhub2: 8 ports with 8 removable, self powered [...] ugen1.3: <vendor 0x8087 product 0x0a2a> at usbus1 [...] ubt0 on uhub2 [...] ubt0: <vendor 0x8087 product 0x0a2a, class 224/1, rev 2.01/0.01, addr 3> on usbus1 [...] ugen1.4: <CN0FHKK7724875CBCG1ZA00 IntegratedWebcamHD> at usbus1 [...] usbd_set_config_index: could not read device status: USB_ERR_STALLED [...] ugen1.5: <Broadcom Corp 5880> at usbus1 [...] wlan0: link state changed to UP [...] ubt0: ubt_ctrl_write_callback:906: control transfer failed: USB_ERR_TIMEOUT [...] ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3, OCF=0x3. Timeout [...] Limiting closed port RST response from 223 to 200 packets/sec [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] pid 2835 (drkonqi), jid 0, uid 1001: exited on signal 6 (core dumped) [...] pid 2873 (baloo_file_extracto), jid 0, uid 1001: exited on signal 6 (core dumped) [...] pid 2933 (baloo_file_extracto), jid 0, uid 1001: exited on signal 6 (core dumped) [...] wlan0: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] All buffers synced. [...] Uptime: 1h27m2s [...] ubt0: detached [...] uhub2: detached [...] uhub1: detached [...] ukbd0: detached [...] uhid0: detached [...] ums0: detached [...] uhub0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-RELEASE #0 releng/13.0-n244733-ea31abc261f: Fri Apr 9 04:24:09 UTC 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(efifb): resolution 1366x768 [...] CPU: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz (2294.73-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306d4 Family=0x6 Model=0x3d Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x21c2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,RDSEED,ADX,SMAP,PROCTRACE> [...] Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 12884901888 (12288 MB) [...] avail memory = 12273999872 (11705 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS. [...] WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS. [...] ioapic0 <Version 2.0> irqs 0-39 [...] Launching APs: 1 2 3 [...] Timecounter "TSC-low" frequency 1147367353 Hz quality 1000 [...] KTLS: Initialized 4 threads [...] random: entropy device external interface [...] [ath_hal] loaded [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd1 at kbdmux0 [...] 000.000055 [4354] netmap_init netmap: loaded module [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL CBX3 > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x27> port 0x930,0x934 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff at device 2.0 on pci0 [...] acpi_video0: <ACPI video extension> on vgapci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Broadwell HDA Controller> mem 0xf723c000-0xf723ffff at device 3.0 on pci0 [...] xhci0: <Broadwell Integrated PCH-LP chipset USB 3.0 controller> mem 0xf7220000-0xf722ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xf080-0xf09f mem 0xf7200000-0xf721ffff,0xf7243000-0xf7243fff at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] hdac1: <Intel Broadwell HDA Controller> mem 0xf7238000-0xf723bfff at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] sdhci_pci0: <Generic SD HCI> mem 0xf7101000-0xf7101fff,0xf7100000-0xf71007ff at device 0.0 on pci1 [...] sdhci_pci0: 1 slot(s) allocated [...] pcib2: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pci2: <network> at device 0.0 (no driver attached) [...] pcib3: <ACPI PCI-PCI bridge> at device 28.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ehci0: <Intel Wildcat Point-LP USB 2.0 controller> mem 0xf7242000-0xf72423ff at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Wildcat Point-LP AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7241000-0xf72417ff at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] acpi_tz2: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0. [...] psm0: model IntelliMouse, device ID 3 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Intel Broadwell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Broadwell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Broadwell (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm1: <Intel Broadwell (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm2: <Intel Broadwell (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] hdacc1: <Realtek ALC293 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC293 Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Realtek ALC293 (Analog 2.0+HP/2.0)> at nid 20,21 and 25 on hdaa1 [...] pcm4: <Realtek ALC293 (Analog)> at nid 22 and 19 on hdaa1 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: CAM [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus0 [...] uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <GIGABYTE GP-GSTFS31240GNTD SBFM61.3> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] uhub1: 15 ports with 15 removable, self powered [...] uhub0: 3 ports with 3 removable, self powered [...] ugen0.2: <Microsoft Microsoft Nano Transceiver 1.1> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <Microsoft Microsoft Nano Transceiver 1.1, class 0/0, rev 2.00/3.15, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer [...] [drm] Got stolen memory base 0xdd800000, size 0x2000000 [...] [drm] ACPI BIOS requests an excessive sleep of 20000 ms, using 1500 ms instead [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector eDP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.eDP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-2 [...] [drm] - kern.vt.fb.default_mode [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] Initialized i915 1.6.0 20190822 for drmn0 on minor 0 [...] WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. [...] VT: Replacing driver "efifb" with new "fb". [...] ugen1.2: <vendor 0x8087 product 0x8001> at usbus1 [...] uhub2 on uhub0 [...] uhub2: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.03, addr 2> on usbus1 [...] uhub2: 8 ports with 8 removable, self powered [...] start FB_INFO: [...] type=11 height=768 width=1366 depth=32 [...] cmsize=16 size=4227072 [...] pbase=0xe0000000 vbase=0xfffff800e0000000 [...] name=drmn0 flags=0x0 stride=5504 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: i915drmfb frame buffer device [...] ichsmb0: <Intel Wildcat Point-LP SMBus controller> port 0xf040-0xf05f mem 0xf7240000-0xf72400ff at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] iwm0: <Intel(R) Dual Band Wireless AC 7265> mem 0xf7000000-0xf7001fff at device 0.0 on pci2 [...] iwm0: hw rev 0x210, fw ver 22.361476.0, address XXX [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] usb_alloc_device: set address 3 failed (USB_ERR_TIMEOUT, ignored) [...] uhid0 on uhub1 [...] uhid0: <Microsoft Microsoft Nano Transceiver 1.1, class 0/0, rev 2.00/3.15, addr 1> on usbus0 [...] ums0 on uhub1 [...] ums0: <Microsoft Microsoft Nano Transceiver 1.1, class 0/0, rev 2.00/3.15, addr 1> on usbus0 [...] ums0: 5 buttons and [XYZ] coordinates ID=0 [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] ugen1.3: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] ugen1.3: <CN0FHKK7724875CBCG1ZA00 IntegratedWebcamHD> at usbus1 [...] ugen1.4: <Broadcom Corp 5880> at usbus1 [...] lo0: link state changed to DOWN [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] pid 2118 (drkonqi), jid 0, uid 1001: exited on signal 6 (core dumped) [...] pid 2227 (baloo_file_extracto), jid 0, uid 1001: exited on signal 6 (core dumped) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] All buffers synced. [...] Uptime: 11m24s [...] uhub2: detached [...] uhub0: detached [...] ukbd0: detached [...] uhid0: detached [...] ums0: detached [...] uhub1: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-RELEASE #0 releng/13.0-n244733-ea31abc261f: Fri Apr 9 04:24:09 UTC 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(efifb): resolution 1366x768 [...] CPU: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz (2294.74-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306d4 Family=0x6 Model=0x3d Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x21c2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,RDSEED,ADX,SMAP,PROCTRACE> [...] Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 12884901888 (12288 MB) [...] avail memory = 12273995776 (11705 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS. [...] WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS. [...] ioapic0 <Version 2.0> irqs 0-39 [...] Launching APs: 1 2 3 [...] Timecounter "TSC-low" frequency 1147367752 Hz quality 1000 [...] KTLS: Initialized 4 threads [...] random: entropy device external interface [...] [ath_hal] loaded [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd1 at kbdmux0 [...] 000.000055 [4354] netmap_init netmap: loaded module [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL CBX3 > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x27> port 0x930,0x934 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff at device 2.0 on pci0 [...] acpi_video0: <ACPI video extension> on vgapci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Broadwell HDA Controller> mem 0xf723c000-0xf723ffff at device 3.0 on pci0 [...] xhci0: <Broadwell Integrated PCH-LP chipset USB 3.0 controller> mem 0xf7220000-0xf722ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xf080-0xf09f mem 0xf7200000-0xf721ffff,0xf7243000-0xf7243fff at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] hdac1: <Intel Broadwell HDA Controller> mem 0xf7238000-0xf723bfff at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] sdhci_pci0: <Generic SD HCI> mem 0xf7101000-0xf7101fff,0xf7100000-0xf71007ff at device 0.0 on pci1 [...] sdhci_pci0: 1 slot(s) allocated [...] pcib2: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pci2: <network> at device 0.0 (no driver attached) [...] pcib3: <ACPI PCI-PCI bridge> at device 28.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ehci0: <Intel Wildcat Point-LP USB 2.0 controller> mem 0xf7242000-0xf72423ff at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Wildcat Point-LP AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7241000-0xf72417ff at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] acpi_tz2: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0. [...] psm0: model IntelliMouse, device ID 3 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] hdacc0: <Intel Broadwell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Broadwell Audio Function Group> at nid 1 on hdacc0 [...] uhub1 on usbus0 [...] uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] pcm0: <Intel Broadwell (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm1: <Intel Broadwell (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm2: <Intel Broadwell (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] hdacc1: <Realtek ALC293 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC293 Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Realtek ALC293 (Analog 2.0+HP/2.0)> at nid 20,21 and 25 on hdaa1 [...] pcm4: <Realtek ALC293 (Analog)> at nid 22 and 19 on hdaa1 [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <GIGABYTE GP-GSTFS31240GNTD SBFM61.3> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub1: 15 ports with 15 removable, self powered [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer [...] [drm] Got stolen memory base 0xdd800000, size 0x2000000 [...] [drm] ACPI BIOS requests an excessive sleep of 20000 ms, using 1500 ms instead [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector eDP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.eDP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-2 [...] [drm] - kern.vt.fb.default_mode [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] Initialized i915 1.6.0 20190822 for drmn0 on minor 0 [...] WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. [...] VT: Replacing driver "efifb" with new "fb". [...] uhub0: 3 ports with 3 removable, self powered [...] ugen0.2: <Microsoft Microsoft Nano Transceiver 1.1> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <Microsoft Microsoft Nano Transceiver 1.1, class 0/0, rev 2.00/3.15, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] start FB_INFO: [...] type=11 height=768 width=1366 depth=32 [...] cmsize=16 size=4227072 [...] pbase=0xe0000000 vbase=0xfffff800e0000000 [...] name=drmn0 flags=0x0 stride=5504 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: i915drmfb frame buffer device [...] ichsmb0: <Intel Wildcat Point-LP SMBus controller> port 0xf040-0xf05f mem 0xf7240000-0xf72400ff at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] iwm0: <Intel(R) Dual Band Wireless AC 7265> mem 0xf7000000-0xf7001fff at device 0.0 on pci2 [...] ugen1.2: <vendor 0x8087 product 0x8001> at usbus1 [...] uhub2 on uhub0 [...] uhub2: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.03, addr 2> on usbus1 [...] iwm0: hw rev 0x210, fw ver 22.361476.0, address XXX [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] uhub2: 8 ports with 8 removable, self powered [...] wlan0: link state changed to UP [...] usb_alloc_device: set address 3 failed (USB_ERR_TIMEOUT, ignored) [...] uhid0 on uhub1 [...] uhid0: <Microsoft Microsoft Nano Transceiver 1.1, class 0/0, rev 2.00/3.15, addr 1> on usbus0 [...] ums0 on uhub1 [...] ums0: <Microsoft Microsoft Nano Transceiver 1.1, class 0/0, rev 2.00/3.15, addr 1> on usbus0 [...] ums0: 5 buttons and [XYZ] coordinates ID=0 [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] ugen1.3: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] ugen1.3: <CN0FHKK7724875CBCG1ZA00 IntegratedWebcamHD> at usbus1 [...] ugen1.4: <Broadcom Corp 5880> at usbus1 [...] Limiting closed port RST response from 759 to 200 packets/sec [...] Cuse v0.1.36 @ /dev/cuse [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] pid 2183 (baloo_file_extracto), jid 0, uid 1001: exited on signal 6 (core dumped) [...] pid 2107 (drkonqi), jid 0, uid 1001: exited on signal 6 (core dumped) [...] pid 2237 (baloo_file_extracto), jid 0, uid 1001: exited on signal 6 (core dumped) [...] wlan0: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] All buffers synced. [...] Uptime: 28m10s [...] uhub2: detached [...] uhub0: detached [...] ukbd0: detached [...] uhid0: detached [...] ums0: detached [...] uhub1: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-RELEASE #0 releng/13.0-n244733-ea31abc261f: Fri Apr 9 04:24:09 UTC 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(efifb): resolution 1366x768 [...] CPU: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz (2294.74-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306d4 Family=0x6 Model=0x3d Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x21c2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,RDSEED,ADX,SMAP,PROCTRACE> [...] Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 12884901888 (12288 MB) [...] avail memory = 12273999872 (11705 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS. [...] WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS. [...] ioapic0 <Version 2.0> irqs 0-39 [...] Launching APs: 1 3 2 [...] Timecounter "TSC-low" frequency 1147367691 Hz quality 1000 [...] KTLS: Initialized 4 threads [...] random: entropy device external interface [...] [ath_hal] loaded [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd1 at kbdmux0 [...] 000.000055 [4354] netmap_init netmap: loaded module [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL CBX3 > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x27> port 0x930,0x934 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff at device 2.0 on pci0 [...] acpi_video0: <ACPI video extension> on vgapci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Broadwell HDA Controller> mem 0xf723c000-0xf723ffff at device 3.0 on pci0 [...] xhci0: <Broadwell Integrated PCH-LP chipset USB 3.0 controller> mem 0xf7220000-0xf722ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xf080-0xf09f mem 0xf7200000-0xf721ffff,0xf7243000-0xf7243fff at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] hdac1: <Intel Broadwell HDA Controller> mem 0xf7238000-0xf723bfff at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] sdhci_pci0: <Generic SD HCI> mem 0xf7101000-0xf7101fff,0xf7100000-0xf71007ff at device 0.0 on pci1 [...] sdhci_pci0: 1 slot(s) allocated [...] pcib2: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pci2: <network> at device 0.0 (no driver attached) [...] pcib3: <ACPI PCI-PCI bridge> at device 28.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ehci0: <Intel Wildcat Point-LP USB 2.0 controller> mem 0xf7242000-0xf72423ff at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Wildcat Point-LP AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7241000-0xf72417ff at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] acpi_tz2: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0. [...] psm0: model IntelliMouse, device ID 3 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Intel Broadwell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Broadwell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Broadwell (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm1: <Intel Broadwell (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm2: <Intel Broadwell (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] hdacc1: <Realtek ALC293 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC293 Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Realtek ALC293 (Analog 2.0+HP/2.0)> at nid 20,21 and 25 on hdaa1 [...] pcm4: <Realtek ALC293 (Analog)> at nid 22 and 19 on hdaa1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0Root mount waiting for: on usbus0 [...] CAM [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <GIGABYTE GP-GSTFS31240GNTD SBFM61.3> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] uhub0: 15 ports with 15 removable, self powered [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer [...] [drm] Got stolen memory base 0xdd800000, size 0x2000000 [...] [drm] ACPI BIOS requests an excessive sleep of 20000 ms, using 1500 ms instead [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector eDP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.eDP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-2 [...] [drm] - kern.vt.fb.default_mode [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] Initialized i915 1.6.0 20190822 for drmn0 on minor 0 [...] WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. [...] VT: Replacing driver "efifb" with new "fb". [...] uhub1: 3 ports with 3 removable, self powered [...] ugen0.2: <Microsoft Microsoft Nano Transceiver 1.1> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Microsoft Microsoft Nano Transceiver 1.1, class 0/0, rev 2.00/3.15, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] ugen1.2: <vendor 0x8087 product 0x8001> at usbus1 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.03, addr 2> on usbus1 [...] start FB_INFO: [...] type=11 height=768 width=1366 depth=32 [...] cmsize=16 size=4227072 [...] pbase=0xe0000000 vbase=0xfffff800e0000000 [...] name=drmn0 flags=0x0 stride=5504 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: i915drmfb frame buffer device [...] ichsmb0: <Intel Wildcat Point-LP SMBus controller> port 0xf040-0xf05f mem 0xf7240000-0xf72400ff at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] iwm0: <Intel(R) Dual Band Wireless AC 7265> mem 0xf7000000-0xf7001fff at device 0.0 on pci2 [...] iwm0: hw rev 0x210, fw ver 22.361476.0, address XXX [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] uhub2: 8 ports with 8 removable, self powered [...] wlan0: link state changed to UP [...] usb_alloc_device: set address 3 failed (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] uhid0 on uhub0 [...] uhid0: <Microsoft Microsoft Nano Transceiver 1.1, class 0/0, rev 2.00/3.15, addr 1> on usbus0 [...] ums0 on uhub0 [...] ums0: <Microsoft Microsoft Nano Transceiver 1.1, class 0/0, rev 2.00/3.15, addr 1> on usbus0 [...] ums0: 5 buttons and [XYZ] coordinates ID=0 [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] ugen1.3: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] ugen1.3: <CN0FHKK7724875CBCG1ZA00 IntegratedWebcamHD> at usbus1 [...] ugen1.4: <Broadcom Corp 5880> at usbus1 [...] pid 2514 (drkonqi), jid 0, uid 1001: exited on signal 6 (core dumped) [...] pid 2578 (baloo_file_extracto), jid 0, uid 1001: exited on signal 6 (core dumped) [...] pid 2580 (baloo_file_extracto), jid 0, uid 1001: exited on signal 6 (core dumped) [...] wlan0: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] All buffers synced. [...] Uptime: 22m32s [...] uhub2: detached [...] uhub1: detached [...] ukbd0: detached [...] uhid0: detached [...] ums0: detached [...] uhub0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-RELEASE #0 releng/13.0-n244733-ea31abc261f: Fri Apr 9 04:24:09 UTC 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(efifb): resolution 1366x768 [...] CPU: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz (2294.74-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306d4 Family=0x6 Model=0x3d Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x21c2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,RDSEED,ADX,SMAP,PROCTRACE> [...] Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 12884901888 (12288 MB) [...] avail memory = 12273995776 (11705 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS. [...] WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS. [...] ioapic0 <Version 2.0> irqs 0-39 [...] Launching APs: 1 3 2 [...] Timecounter "TSC-low" frequency 1147370281 Hz quality 1000 [...] KTLS: Initialized 4 threads [...] random: entropy device external interface [...] [ath_hal] loaded [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd1 at kbdmux0 [...] 000.000055 [4354] netmap_init netmap: loaded module [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL CBX3 > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x27> port 0x930,0x934 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff at device 2.0 on pci0 [...] acpi_video0: <ACPI video extension> on vgapci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Broadwell HDA Controller> mem 0xf723c000-0xf723ffff at device 3.0 on pci0 [...] xhci0: <Broadwell Integrated PCH-LP chipset USB 3.0 controller> mem 0xf7220000-0xf722ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xf080-0xf09f mem 0xf7200000-0xf721ffff,0xf7243000-0xf7243fff at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] hdac1: <Intel Broadwell HDA Controller> mem 0xf7238000-0xf723bfff at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] sdhci_pci0: <Generic SD HCI> mem 0xf7101000-0xf7101fff,0xf7100000-0xf71007ff at device 0.0 on pci1 [...] sdhci_pci0: 1 slot(s) allocated [...] pcib2: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pci2: <network> at device 0.0 (no driver attached) [...] pcib3: <ACPI PCI-PCI bridge> at device 28.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ehci0: <Intel Wildcat Point-LP USB 2.0 controller> mem 0xf7242000-0xf72423ff at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Wildcat Point-LP AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7241000-0xf72417ff at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] acpi_tz2: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0. [...] psm0: model IntelliMouse, device ID 3 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus0 [...] uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] hdacc0: <Intel Broadwell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Broadwell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Broadwell (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm1: <Intel Broadwell (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm2: <Intel Broadwell (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] hdacc1: <Realtek ALC293 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC293 Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Realtek ALC293 (Analog 2.0+HP/2.0)> at nid 20,21 and 25 on hdaa1 [...] pcm4: <Realtek ALC293 (Analog)> at nid 22 and 19 on hdaa1 [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <GIGABYTE GP-GSTFS31240GNTD SBFM61.3> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub1: 15 ports with 15 removable, self powered [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer [...] [drm] Got stolen memory base 0xdd800000, size 0x2000000 [...] [drm] ACPI BIOS requests an excessive sleep of 20000 ms, using 1500 ms instead [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector eDP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.eDP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-2 [...] [drm] - kern.vt.fb.default_mode [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] Initialized i915 1.6.0 20190822 for drmn0 on minor 0 [...] WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. [...] VT: Replacing driver "efifb" with new "fb". [...] uhub0: 3 ports with 3 removable, self powered [...] ugen0.2: <Microsoft Microsoft Nano Transceiver 1.1> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <Microsoft Microsoft Nano Transceiver 1.1, class 0/0, rev 2.00/3.15, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] ugen1.2: <vendor 0x8087 product 0x8001> at usbus1 [...] uhub2 on uhub0 [...] uhub2: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.03, addr 2> on usbus1 [...] start FB_INFO: [...] type=11 height=768 width=1366 depth=32 [...] cmsize=16 size=4227072 [...] pbase=0xe0000000 vbase=0xfffff800e0000000 [...] name=drmn0 flags=0x0 stride=5504 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: i915drmfb frame buffer device [...] ichsmb0: <Intel Wildcat Point-LP SMBus controller> port 0xf040-0xf05f mem 0xf7240000-0xf72400ff at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] iwm0: <Intel(R) Dual Band Wireless AC 7265> mem 0xf7000000-0xf7001fff at device 0.0 on pci2 [...] iwm0: hw rev 0x210, fw ver 22.361476.0, address XXX [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] uhub2: 8 ports with 8 removable, self powered [...] usb_alloc_device: set address 3 failed (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] uhid0 on uhub1 [...] uhid0: <Microsoft Microsoft Nano Transceiver 1.1, class 0/0, rev 2.00/3.15, addr 1> on usbus0 [...] ums0 on uhub1 [...] ums0: <Microsoft Microsoft Nano Transceiver 1.1, class 0/0, rev 2.00/3.15, addr 1> on usbus0 [...] ums0: 5 buttons and [XYZ] coordinates ID=0 [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] ugen1.3: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] ugen1.3: <CN0FHKK7724875CBCG1ZA00 IntegratedWebcamHD> at usbus1 [...] ugen1.4: <Broadcom Corp 5880> at usbus1 [...] wlan0: link state changed to UP [...] pid 1951 (drkonqi), jid 0, uid 1001: exited on signal 6 (core dumped) [...] pid 1979 (baloo_file_extracto), jid 0, uid 1001: exited on signal 6 (core dumped) [...] wlan0: link state changed to DOWN [...] pid 2057 (baloo_file_extracto), jid 0, uid 1001: exited on signal 6 (core dumped) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] All buffers synced. [...] Uptime: 13m8s [...] uhub2: detached [...] uhub0: detached [...] ukbd0: detached [...] uhid0: detached [...] ums0: detached [...] uhub1: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-RELEASE #0 releng/13.0-n244733-ea31abc261f: Fri Apr 9 04:24:09 UTC 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(efifb): resolution 1366x768 [...] CPU: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz (2294.73-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306d4 Family=0x6 Model=0x3d Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x21c2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,RDSEED,ADX,SMAP,PROCTRACE> [...] Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 12884901888 (12288 MB) [...] avail memory = 12273995776 (11705 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS. [...] WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS. [...] ioapic0 <Version 2.0> irqs 0-39 [...] Launching APs: 1 3 2 [...] Timecounter "TSC-low" frequency 1147366871 Hz quality 1000 [...] KTLS: Initialized 4 threads [...] random: entropy device external interface [...] [ath_hal] loaded [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd1 at kbdmux0 [...] 000.000055 [4354] netmap_init netmap: loaded module [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL CBX3 > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x27> port 0x930,0x934 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff at device 2.0 on pci0 [...] acpi_video0: <ACPI video extension> on vgapci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Broadwell HDA Controller> mem 0xf723c000-0xf723ffff at device 3.0 on pci0 [...] xhci0: <Broadwell Integrated PCH-LP chipset USB 3.0 controller> mem 0xf7220000-0xf722ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xf080-0xf09f mem 0xf7200000-0xf721ffff,0xf7243000-0xf7243fff at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] hdac1: <Intel Broadwell HDA Controller> mem 0xf7238000-0xf723bfff at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] sdhci_pci0: <Generic SD HCI> mem 0xf7101000-0xf7101fff,0xf7100000-0xf71007ff at device 0.0 on pci1 [...] sdhci_pci0: 1 slot(s) allocated [...] pcib2: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pci2: <network> at device 0.0 (no driver attached) [...] pcib3: <ACPI PCI-PCI bridge> at device 28.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ehci0: <Intel Wildcat Point-LP USB 2.0 controller> mem 0xf7242000-0xf72423ff at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Wildcat Point-LP AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7241000-0xf72417ff at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] acpi_tz2: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0. [...] psm0: model IntelliMouse, device ID 3 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] hdacc0: <Intel Broadwell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Broadwell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Broadwell (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] uhub1 on usbus0 [...] uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] pcm1: <Intel Broadwell (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm2: <Intel Broadwell (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] hdacc1: <Realtek ALC293 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC293 Audio Function Group> at nid 1 on hdacc1 [...] pcm3: <Realtek ALC293 (Analog 2.0+HP/2.0)> at nid 20,21 and 25 on hdaa1 [...] pcm4: <Realtek ALC293 (Analog)> at nid 22 and 19 on hdaa1 [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <GIGABYTE GP-GSTFS31240GNTD SBFM61.3> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub1: 15 ports with 15 removable, self powered [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer [...] [drm] Got stolen memory base 0xdd800000, size 0x2000000 [...] [drm] ACPI BIOS requests an excessive sleep of 20000 ms, using 1500 ms instead [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector eDP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.eDP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-2 [...] [drm] - kern.vt.fb.default_mode [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] Initialized i915 1.6.0 20190822 for drmn0 on minor 0 [...] WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. [...] VT: Replacing driver "efifb" with new "fb". [...] uhub0: 3 ports with 3 removable, self powered [...] ugen0.2: <Microsoft Microsoft Nano Transceiver 1.1> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <Microsoft Microsoft Nano Transceiver 1.1, class 0/0, rev 2.00/3.15, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] start FB_INFO: [...] type=11 height=768 width=1366 depth=32 [...] cmsize=16 size=4227072 [...] pbase=0xe0000000 vbase=0xfffff800e0000000 [...] name=drmn0 flags=0x0 stride=5504 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: i915drmfb frame buffer device [...] ugen1.2: <vendor 0x8087 product 0x8001> at usbus1 [...] uhub2 on uhub0 [...] uhub2: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.03, addr 2> on usbus1 [...] ichsmb0: <Intel Wildcat Point-LP SMBus controller> port 0xf040-0xf05f mem 0xf7240000-0xf72400ff at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] iwm0: <Intel(R) Dual Band Wireless AC 7265> mem 0xf7000000-0xf7001fff at device 0.0 on pci2 [...] iwm0: hw rev 0x210, fw ver 22.361476.0, address XXX [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] uhub2: 8 ports with 8 removable, self powered [...] usb_alloc_device: set address 3 failed (USB_ERR_TIMEOUT, ignored) [...] wlan0: link state changed to UP [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] uhid0 on uhub1 [...] uhid0: <Microsoft Microsoft Nano Transceiver 1.1, class 0/0, rev 2.00/3.15, addr 1> on usbus0 [...] ums0 on uhub1 [...] ums0: <Microsoft Microsoft Nano Transceiver 1.1, class 0/0, rev 2.00/3.15, addr 1> on usbus0 [...] ums0: 5 buttons and [XYZ] coordinates ID=0 [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] ugen1.3: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] ugen1.3: <CN0FHKK7724875CBCG1ZA00 IntegratedWebcamHD> at usbus1 [...] ugen1.4: <Broadcom Corp 5880> at usbus1