[...] ---<<BOOT>>--- [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE r354233 GENERIC amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 1024x768 [...] CPU: AMD FX(tm)-6100 Six-Core Processor (3292.98-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x600f12 Family=0x15 Model=0x1 Stepping=2 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x1e98220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1c9bfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,NodeId,Topology,PCXC,PNXC> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16562130944 (15794 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) [...] arc4random: no preloaded entropy cache [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20181213/tbfadt-796) [...] ioapic0 <Version 2.1> irqs 0-23 on motherboard [...] ioapic1 <Version 2.1> irqs 24-55 on motherboard [...] Launching APs: 1 2 5 4 3 [...] Timecounter "TSC-low" frequency 1646492410 Hz quality 1000 [...] random: entropy device external interface [...] md0: Preloaded image </data/XXXXXXXXXXXX 14417920 bytes at 0xffffffff82a309a8 [...] 000.000046 [4335] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8112e050, 0) error 19 [...] kbd1 at kbdmux0 [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xd0000000-0xdfffffff,0xfea00000-0xfea3ffff irq 24 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <ATI (0xaab0) HDA Controller> mem 0xfea60000-0xfea63fff irq 25 at device 0.1 on pci1 [...] hdac0: hdac_get_capabilities: Invalid corb size (0) [...] device_attach: hdac0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> irq 53 at device 9.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfe900000-0xfe907fff irq 48 at device 0.0 on pci2 [...] xhci0: 64 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf050-0xf05f mem 0xfeb0b000-0xfeb0b3ff irq 19 at device 17.0 on pci0 [...] ahci0: AHCI v1.20 with 4 6Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb0a000-0xfeb0afff irq 18 at device 18.0 on pci0 [...] usbus1 on ohci0 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb09000-0xfeb090ff irq 17 at device 18.2 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci0 [...] usbus2: 480Mbps High Speed USB v2.0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb08000-0xfeb08fff irq 18 at device 19.0 on pci0 [...] usbus3 on ohci1 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb07000-0xfeb070ff irq 17 at device 19.2 on pci0 [...] usbus4: EHCI version 1.0 [...] usbus4 on ehci1 [...] usbus4: 480Mbps High Speed USB v2.0 [...] atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f irq 17 at device 20.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] ata1: <ATA channel> at channel 1 on atapci0 [...] hdac0: <ATI SB600 HDA Controller> mem 0xfeb00000-0xfeb03fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] emu10kx0: <Creative Audigy (Unknown model) [SB????]> port 0xd100-0xd11f irq 20 at device 5.0 on pci3 [...] pcm0: <EMU10Kx DSP front PCM interface> on emu10kx0 [...] pcm0: AC97 reset timed out. [...] pcm0: ac97 codec invalid or not present (id == 0) [...] pcm1: <EMU10Kx DSP rear PCM interface> on emu10kx0 [...] pcm2: <EMU10Kx DSP center PCM interface> on emu10kx0 [...] pcm3: <EMU10Kx DSP subwoofer PCM interface> on emu10kx0 [...] re0: <D-Link DGE-528(T) Gigabit Ethernet Adapter> port 0xd000-0xd0ff mem 0xfe820000-0xfe8200ff irq 21 at device 6.0 on pci3 [...] re0: Chip rev. 0x10000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb06000-0xfeb06fff irq 18 at device 20.5 on pci0 [...] usbus5 on ohci2 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb05000-0xfeb05fff irq 18 at device 22.0 on pci0 [...] usbus6 on ohci3 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb04000-0xfeb040ff irq 17 at device 22.2 on pci0 [...] usbus7: EHCI version 1.0 [...] usbus7 on ehci2 [...] usbus7: 480Mbps High Speed USB v2.0 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd3fff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior. [...] Consider tuning vm.kmem_size and vm.kmem_size_max [...] in /boot/loader.conf. [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] arc4random: no preloaded entropy cache [...] hdac0: Command timeout on address 1 [...] hdac0: Command timeout on address 1 [...] hdac0: CODEC is not responding! [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: CODEC is not responding! [...] hdac0: Command timeout on address 3 [...] hdac0: Command timeout on address 3 [...] hdac0: CODEC is not responding! [...] hdacc0: <Realtek ALC892 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0 [...] pcm4: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0 [...] pcm5: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa0 [...] ugen3.1: <ATI OHCI root HUB> at usbus3 [...] ugen0.1: <0x1b6f XHCI root HUB> at usbus0 [...] uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] ugen2.1: <ATI EHCI root HUB> at usbus2 [...] ugen5.1: <ATI OHCI root HUB> at usbus5 [...] ugen7.1: <ATI EHCI root HUB> at usbus7 [...] uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] ugen6.1: <ATI OHCI root HUB> at usbus6 [...] ugen4.1: <ATI EHCI root HUB> at usbus4 [...] uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] uhub4: <0x1b6f XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 [...] ugen1.1: <ATI OHCI root HUB> at usbus1 [...] uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 [...] uhub7: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub1: 2 ports with 2 removable, self powered [...] uhub3: 4 ports with 4 removable, self powered [...] uhub7: 5 ports with 5 removable, self powered [...] uhub0: 5 ports with 5 removable, self powered [...] uhub4: 4 ports with 4 removable, self powered [...] ugen0.2: <VIA Labs, Inc. USB2.0 Hub> at usbus0 [...] uhub8 on uhub4 [...] uhub8: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/90.11, addr 1> on usbus0 [...] uhub8: 4 ports with 4 removable, self powered [...] uhub5: 4 ports with 4 removable, self powered [...] uhub6: 5 ports with 5 removable, self powered [...] uhub2: 5 ports with 5 removable, self powered [...] ugen2.2: <Apple, Inc. Keyboard Hub> at usbus2 [...] uhub9 on uhub2 [...] uhub9: <Apple, Inc. Keyboard Hub, class 9/0, rev 2.00/94.15, addr 2> on usbus2 [...] uhub9: 3 ports with 2 removable, bus powered [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SAMSUNG HD403LJ CT100-10> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 381554MB (781422768 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <ST3500830AS 3.AFE> ATA-7 SATA 2.x device [...] ada1: Serial Number... [...] ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 476940MB (976773168 512 byte sectors) [...] ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada2: <SAMSUNG HD154UI 1AG01118> ATA-7 SATA 2.x device [...] ada2: Serial Number... [...] ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 1430799MB (2930277168 512 byte sectors) [...] ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada3: <CT500MX500SSD1 M3CR023> ACS-3 ATA SATA 3.x device [...] ada3: Serial Number... [...] ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada3: Command Queueing enabled [...] ada3: 476940MB (976773168 512 byte sectors) [...] Trying to mount root from ufs:/dev/md0 []... [...] ugen2.3: <Apple, Inc Apple Keyboard> at usbus2 [...] ukbd0 on uhub9 [...] ukbd0: <Apple, Inc Apple Keyboard, class 0/0, rev 2.00/0.69, addr 3> on usbus2 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus2 usbus0 [...] ugen2.4: <vendor 0x05e3 USB2.0 Hub> at usbus2 [...] uhub10 on uhub2 [...] uhub10: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/7.02, addr 4> on usbus2 [...] Root mount waiting for: usbus2 usbus0 [...] uhub10: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus2 usbus0 [...] Root mount waiting for: usbus2 usbus0 [...] usbd_setup_device_desc: getting device descriptor at addr 1 failed, USB_ERR_TIMEOUT [...] Root mount waiting for: usbus2 usbus0 [...] ugen2.5: <vendor 0x13fe USB DISK 3.0> at usbus2 [...] umass0 on uhub10 [...] umass0: <vendor 0x13fe USB DISK 3.0, class 0/0, rev 2.10/1.00, addr 5> on usbus2 [...] umass0: SCSI over Bulk-Only; quirks = 0x8100 [...] umass0:6:0: Attached to scbus6 [...] da0 at umass-sim0 bus 0 scbus6 target 0 lun 0 [...] da0: < USB DISK 3.0 PMAP> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 29573MB (60566016 512 byte sectors) [...] da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> [...] ugen2.6: <vendor 0x1ea7 2.4G Mouse> at usbus2 [...] Root mount waiting for: usbus2 usbus0 [...] ugen2.7: <Logitech USB Receiver> at usbus2 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] usbd_setup_device_desc: getting device descriptor at addr 1 failed, USB_ERR_TIMEOUT [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] usbd_setup_device_desc: getting device descriptor at addr 1 failed, USB_ERR_TIMEOUT [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] usbd_setup_device_desc: getting device descriptor at addr 1 failed, USB_ERR_TIMEOUT [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] usbd_setup_device_desc: getting device descriptor at addr 1 failed, USB_ERR_TIMEOUT [...] ugen0.3: <Unknown > at usbus0 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] random: unblocking device. [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] Trying to mount root from zfs:livecd []... [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] hdac1: <ATI (0xaab0) HDA Controller> mem 0xfea60000-0xfea63fff irq 25 at device 0.1 on pci1 [...] hdac1: hdac_get_capabilities: Invalid corb size (0) [...] device_attach: hdac1 attach returned 6 [...] uhid0 on uhub9 [...] uhid0: <Apple, Inc Apple Keyboard, class 0/0, rev 2.00/0.69, addr 3> on usbus2 [...] ums0 on uhub10 [...] ums0: <vendor 0x1ea7 2.4G Mouse, class 0/0, rev 1.10/2.00, addr 6> on usbus2 [...] ums0: 8 buttons and [XYZT] coordinates ID=2 [...] ums1 on uhub10 [...] ums1: <Logitech USB Receiver, class 0/0, rev 1.10/9.10, addr 7> on usbus2 [...] ums1: 5 buttons and [XYZ] coordinates ID=0 [...] hdac1: <ATI (0xaab0) HDA Controller> mem 0xfea60000-0xfea63fff irq 25 at device 0.1 on pci1 [...] hdac1: hdac_get_capabilities: Invalid corb size (0) [...] device_attach: hdac1 attach returned 6 [...] hdac1: <ATI (0xaab0) HDA Controller> mem 0xfea60000-0xfea63fff irq 25 at device 0.1 on pci1 [...] hdac1: hdac_get_capabilities: Invalid corb size (0) [...] device_attach: hdac1 attach returned 6 [...] [drm] amdgpu kernel modesetting enabled. [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] initializing kernel modesetting (VERDE 0x1002:0x683F 0x174B:0xE213 0x00). [...] [drm] register mmio base: 0xFEA00000 [...] [drm] register mmio size: 262144 [...] [drm] PCI I/O BAR is not found. [...] [drm] BIOS signature incorrect 0 0 [...] ATOM BIOS: 113-C4450100-X006 [...] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [...] drmn0: successfully loaded firmware image with name: radeon/verde_mc.bin [...] drmn0: VRAM: 1024M 0x000000F400000000 - 0x000000F43FFFFFFF (1024M used) [...] drmn0: GTT: 1024M 0x0000000000000000 - 0x000000003FFFFFFF [...] Successfully added WC MTRR for [0xd0000000-0xdfffffff]: 0; [...] [drm] Detected VRAM RAM=1024M, BAR=256M [...] [drm] RAM width 128bits GDDR5 [...] [TTM] Zone kernel: Available graphics memory: 8337648 kiB [...] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [...] [TTM] Initializing pool allocator [...] [drm] amdgpu: 1024M of VRAM memory ready [...] [drm] amdgpu: 3072M of GTT memory ready. [...] i_size_write unimplemented [...] [drm] GART: num cpu pages 262144, num gpu pages 262144 [...] drmn0: PCIE GART of 1024M enabled (table at 0x000000F400040000). [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] drmn0: successfully loaded firmware image with name: radeon/verde_smc.bin [...] [drm] Internal thermal controller with fan control [...] [drm] amdgpu: dpm initialized [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DVI-I-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DVI-I-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] AMDGPU Display Connectors [...] [drm] Connector 0: [...] [drm] DP-1 [...] [drm] HPD4 [...] [drm] DDC: 0x1950 0x1950 0x1951 0x1951 0x1952 0x1952 0x1953 0x1953 [...] [drm] Encoders: [...] [drm] DFP1: INTERNAL_UNIPHY2 [...] [drm] Connector 1: [...] [drm] HDMI-A-1 [...] [drm] HPD1 [...] [drm] DDC: 0x195c 0x195c 0x195d 0x195d 0x195e 0x195e 0x195f 0x195f [...] [drm] Encoders: [...] [drm] DFP2: INTERNAL_UNIPHY2 [...] [drm] Connector 2: [...] [drm] DVI-I-1 [...] [drm] HPD2 [...] [drm] DDC: 0x1958 0x1958 0x1959 0x1959 0x195a 0x195a 0x195b 0x195b [...] [drm] Encoders: [...] [drm] DFP3: INTERNAL_UNIPHY [...] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [...] drmn0: successfully loaded firmware image with name: radeon/verde_pfp.bin [...] drmn0: successfully loaded firmware image with name: radeon/verde_me.bin [...] drmn0: successfully loaded firmware image with name: radeon/verde_ce.bin [...] drmn0: successfully loaded firmware image with name: radeon/verde_rlc.bin [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] i_size_write unimplemented [...] [drm] fb mappable at 0xD0243000 [...] [drm] vram apper at 0xD0000000 [...] [drm] size 8294400 [...] [drm] fb depth is 24 [...] [drm] pitch is 7680 [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] cmsize=16 size=8294400 [...] pbase=0xd0243000 vbase=0xfffff800d0243000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: amdgpudrmfb frame buffer device [...] i_size_write unimplemented [...] [drm] Initialized amdgpu 3.23.0 20150101 for drmn0 on minor 0 [...] interface fusefs.1 already present in the KLD 'fuse.ko'! [...] linker_load_file: /boot/kernel/fusefs.ko - unsupported file type