[...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-RELEASE-p4 #0: Tue Aug 24 07:33:27 UTC 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 11.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) [...] VT(vga): resolution 640x480 [...] CPU: AMD Phenom(tm) II X6 1090T Processor (3200.06-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x100fa0 Family=0x10 Model=0xa Stepping=0 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x802009<SSE3,MON,CX16,POPCNT> [...] AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> [...] AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT> [...] SVM: NP,NRIP,NAsids=64 [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8277004288 (7893 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <HPQOEM SLIC-CPC> [...] FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20201113/tbfadt-796) [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20201113/tbfadt-748) [...] ioapic0 <Version 2.1> irqs 0-23 [...] Launching APs: 1 4 3 5 2 [...] Timecounter "TSC-low" frequency 1600032486 Hz quality 800 [...] KTLS: Initialized 6 threads [...] random: entropy device external interface [...] [ath_hal] loaded [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd1 at kbdmux0 [...] 000.000061 [4354] netmap_init netmap: loaded module [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] vtvga0: <VT VGA driver> [...] cryptosoft0: <software crypto> [...] aesni0: No AES or SHA support. [...] acpi0: <HPQOEM SLIC-CPC> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 450 [...] Event timer "HPET2" frequency 14318180 Hz quality 450 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xd0000000-0xdfffffff,0xfe8e0000-0xfe8fffff irq 18 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <ATI RV840 HDA Controller> mem 0xfe8bc000-0xfe8bffff irq 19 at device 0.1 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 5.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] ral0: <Ralink Technology RT3090> mem 0xfe9f0000-0xfe9fffff irq 17 at device 0.0 on pci2 [...] ral0: MAC/BBP RT3090 (rev 0x3213), RF RT3020 (MIMO 1T1R), address XXX [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 10.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeaff000-0xfeafffff,0xfdffc000-0xfdffffff irq 18 at device 0.0 on pci3 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x28000000 [...] re0: MAC rev. 0x00300000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xb000-0xb007,0xa000-0xa003,0x9000-0x9007,0x8000-0x8003,0x7000-0x700f mem 0xfe7ffc00-0xfe7fffff irq 22 at device 17.0 on pci0 [...] ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe7fe000-0xfe7fefff irq 16 at device 18.0 on pci0 [...] usbus0 on ohci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe7fd000-0xfe7fdfff irq 16 at device 18.1 on pci0 [...] usbus1 on ohci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe7ff800-0xfe7ff8ff irq 17 at device 18.2 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci0 [...] usbus2: 480Mbps High Speed USB v2.0 [...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe7fc000-0xfe7fcfff irq 18 at device 19.0 on pci0 [...] usbus3 on ohci2 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe7f7000-0xfe7f7fff irq 18 at device 19.1 on pci0 [...] usbus4 on ohci3 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe7ff400-0xfe7ff4ff irq 19 at device 19.2 on pci0 [...] usbus5: EHCI version 1.0 [...] usbus5 on ehci1 [...] usbus5: 480Mbps High Speed USB v2.0 [...] hdac1: <ATI SB600 HDA Controller> mem 0xfe7f0000-0xfe7f3fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pci4: <serial bus, FireWire> at device 6.0 (no driver attached) [...] ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe7f6000-0xfe7f6fff irq 18 at device 20.5 on pci0 [...] usbus6 on ohci4 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] acpi_button0: <Power Button> on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xd9000-0xd9fff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC888 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC888 (Analog 7.1/2.0)> at nid 20,22,21,23 and 24,25 on hdaa1 [...] pcm2: <Realtek ALC888 (Analog)> at nid 27 and 28 on hdaa1 [...] pcm3: <Realtek ALC888 (Rear Digital)> at nid 30 on hdaa1 [...] Trying to mount root from ufs:/dev/ada1s1a [rw]... [...] Root mount waiting for: CAM usbus0 usbus1 usbus2 usbus3 usbus4 usbus5 usbus6 [...] ugen1.1: <ATI OHCI root HUB> at usbus1 [...] ugen6.1: <ATI OHCI root HUB> at usbus6 [...] uhub0 on usbus1 [...] uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] ugen3.1: <ATI OHCI root HUB> at usbus3 [...] ugen4.1: <ATI OHCI root HUB> at usbus4 [...] uhub1 on usbus6 [...] uhub2 on usbus3 [...] ugen0.1: <ATI OHCI root HUB> at usbus0 [...] uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] ugen2.1: <ATI EHCI root HUB> at usbus2 [...] uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] uhub3 on usbus0 [...] uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub4 on usbus4 [...] uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] ugen5.1: <ATI EHCI root HUB> at usbus5 [...] uhub5 on usbus2 [...] uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub6 on usbus5 [...] uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 860 EVO 1TB RVT04B6Q> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 953869MB (1953525168 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <WDC WD20EARS-60MVWB0 51.0AB51> ATA8-ACS SATA 2.x device [...] ada1: Serial Number... [...] ada1: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 1907729MB (3907029168 512 byte sectors) [...] ada1: quirks=0x1<4K> [...] cd0 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] cd0: <hp BD B DH8E2L 8HD9> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] uhub1: 2 ports with 2 removable, self powered [...] uhub2: 3 ports with 3 removable, self powered [...] uhub0: 3 ports with 3 removable, self powered [...] uhub4: 3 ports with 3 removable, self powered [...] uhub3: 3 ports with 3 removable, self powered [...] Root mount waiting for: usbus2 usbus5 [...] Root mount waiting for: usbus2 usbus5 [...] uhub5: 6 ports with 6 removable, self powered [...] uhub6: 6 ports with 6 removable, self powered [...] ugen5.2: <vendor 0x0424 product 0x2514> at usbus5 [...] uhub7 on uhub6 [...] uhub7: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 2> on usbus5 [...] uhub7: MTT enabled [...] Root mount waiting for: usbus5 [...] uhub7: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus5 [...] ugen5.3: <vendor 0x0461 USB Optical Mouse> at usbus5 [...] ugen5.4: <vendor 0x413c USB 2.0 Hub MTT> at usbus5 [...] uhub8 on uhub7 [...] uhub8: <vendor 0x413c USB 2.0 Hub MTT, class 9/0, rev 2.00/1.00, addr 4> on usbus5 [...] uhub8: MTT enabled [...] Root mount waiting for: usbus5 [...] uhub8: 4 ports with 3 removable, bus powered [...] Root mount waiting for: usbus5 [...] ugen5.5: <Dell Dell Wired Multimedia Keyboard> at usbus5 [...] ukbd0 on uhub8 [...] ukbd0: <Dell Wired Multimedia Keyboard> on usbus5 [...] kbd2 at ukbd0 [...] ugen5.6: <Generic Mass Storage Device> at usbus5 [...] umass0 on uhub6 [...] umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 6> on usbus5 [...] umass0: SCSI over Bulk-Only; quirks = 0x4001 [...] umass0:6:0: Attached to scbus6 [...] da0 at umass-sim0 bus 0 scbus6 target 0 lun 0 [...] da0: <Generic- SD/MMC 1.00> Removable Direct Access SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 1964MB (4022272 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] da1 at umass-sim0 bus 0 scbus6 target 0 lun 1 [...] da1: <Generic- Compact Flash 1.01> Removable Direct Access SCSI device [...] da1: Serial Number... [...] da1: 40.000MB/s transfers [...] da1: Attempt to query device size failed: NOT READY, Medium not present [...] da1: quirks=0x2<NO_6_BYTE> [...] da2 at umass-sim0 bus 0 scbus6 target 0 lun 2 [...] da2: <Generic- SM/xD-Picture 1.02> Removable Direct Access SCSI device [...] da2: Serial Number... [...] da2: 40.000MB/s transfers [...] da2: Attempt to query device size failed: NOT READY, Medium not present [...] da2: quirks=0x2<NO_6_BYTE> [...] da3 at umass-sim0 bus 0 scbus6 target 0 lun 3 [...] da3: <Generic- MS/MS-Pro 1.03> Removable Direct Access SCSI device [...] da3: Serial Number... [...] da3: 40.000MB/s transfers [...] da3: Attempt to query device size failed: NOT READY, Medium not present [...] da3: quirks=0x2<NO_6_BYTE> [...] mountroot: waiting for device /dev/ada1s1a... [...] [drm] radeon kernel modesetting enabled. [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68B8 0x103C:0x6881 0x00). [...] [drm ERROR :radeon_atombios_init] Unable to find PCI I/O BAR; using MMIO for ATOM IIO [...] ATOM BIOS: JUNIPER [...] drmn0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [...] drmn0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [...] Successfully added WC MTRR for [0xd0000000-0xdfffffff]: 0; [...] [drm] Detected VRAM RAM=1024M, BAR=256M [...] [drm] RAM width 128bits DDR [...] [TTM] Zone kernel: Available graphics memory: 4173220 KiB [...] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [...] [TTM] Initializing pool allocator [...] [drm] radeon: 1024M of VRAM memory ready [...] [drm] radeon: 1024M of GTT memory ready. [...] [drm] Loading JUNIPER Microcode [...] drmn0: successfully loaded firmware image 'radeon/JUNIPER_pfp.bin' [...] drmn0: successfully loaded firmware image 'radeon/JUNIPER_me.bin' [...] drmn0: successfully loaded firmware image 'radeon/JUNIPER_rlc.bin' [...] drmn0: successfully loaded firmware image 'radeon/JUNIPER_smc.bin' [...] [drm] Internal thermal controller with fan control [...] [drm] radeon: dpm initialized [...] drmn0: successfully loaded firmware image 'radeon/CYPRESS_uvd.bin' [...] [drm] GART: num cpu pages 262144, num gpu pages 262144 [...] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [...] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [...] drmn0: WB enabled [...] drmn0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x0xfffff80006722c00 [...] drmn0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0xfffff80006722c0c [...] drmn0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x0xfffff800d005c418 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] drmn0: radeon: MSI limited to 32-bit [...] drmn0: radeon: using MSI. [...] [drm] radeon: irq initialized. [...] [drm] ring test on 0 succeeded in 1 usecs [...] [drm] ring test on 3 succeeded in 2 usecs [...] [drm] ring test on 5 succeeded in 1 usecs [...] [drm] UVD initialized successfully. [...] [drm] ib test on ring 0 succeeded in 0 usecs [...] [drm] ib test on ring 3 succeeded in 0 usecs [...] [drm] ib test on ring 5 succeeded [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DVI-I-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DVI-I-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DVI-I-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DVI-I-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Radeon Display Connectors [...] [drm] Connector 0: [...] [drm] DP-1 [...] [drm] HPD4 [...] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [...] [drm] Encoders: [...] [drm] DFP1: INTERNAL_UNIPHY2 [...] [drm] Connector 1: [...] [drm] HDMI-A-1 [...] [drm] HPD5 [...] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [...] [drm] Encoders: [...] [drm] DFP2: INTERNAL_UNIPHY2 [...] [drm] Connector 2: [...] [drm] DVI-I-1 [...] [drm] HPD1 [...] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [...] [drm] Encoders: [...] [drm] DFP3: INTERNAL_UNIPHY1 [...] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [...] [drm] Connector 3: [...] [drm] DVI-I-2 [...] [drm] HPD6 [...] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [...] [drm] Encoders: [...] [drm] DFP4: INTERNAL_UNIPHY [...] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [...] [drm] fb mappable at 0xD034D000 [...] [drm] vram apper at 0xD0000000 [...] [drm] size 9216000 [...] [drm] fb depth is 24 [...] [drm] pitch is 7680 [...] WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. [...] VT: Replacing driver "vga" with new "fb". [...] start FB_INFO: [...] type=11 height=1200 width=1920 depth=32 [...] cmsize=16 size=9216000 [...] pbase=0xd034d000 vbase=0xfffff800d034d000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: radeondrmfb frame buffer device [...] [drm] Initialized radeon 2.50.0 20080528 for drmn0 on minor 0 [...] intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 [...] intsmb0: intr SMI enabled revision 0 [...] intsmb0: using polling mode when configured interrupt is SMI [...] smbus0: <System Management Bus> on intsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMID.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] wlan0: link state changed to UP [...] re0: link state changed to DOWN [...] ums0 on uhub7 [...] ums0: <vendor 0x0461 USB Optical Mouse, class 0/0, rev 2.00/2.00, addr 3> on usbus5 [...] ums0: 3 buttons and [XYZT] coordinates ID=0 [...] ums1 on uhub8 [...] ums1: <Dell Wired Multimedia Keyboard> on usbus5 [...] ums1: 3 buttons and [XYZ] coordinates ID=1 [...] ral0: need multicast update callback [...] ral0: need multicast update callback [...] ral0: need multicast update callback [...] ral0: need multicast update callback [...] Security policy loaded: MAC/ntpd (mac_ntpd)