[...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE r366954 GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(vga): resolution 640x480 [...] CPU: AMD Athlon(tm) Processor 2650e (1596.04-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x70ff2 Family=0xf Model=0x7f Stepping=2 [...] Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> [...] Features2=0x2001<SSE3,CX16> [...] AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> [...] AMD Features2=0x11d<LAHF,SVM,ExtAPIC,CR8,Prefetch> [...] SVM: NAsids=64 [...] real memory = 3221225472 (3072 MB) [...] avail memory = 2824908800 (2694 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <PTLTD APIC > [...] random: unblocking device. [...] MADT: Forcing active-low polarity and level trigger for SCI [...] ioapic0 <Version 2.1> irqs 0-23 on motherboard [...] Timecounter "TSC" frequency 1596039276 Hz quality 800 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] 000.000022 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19 [...] [ath_dfs] loaded [...] [ath_rate] loaded [...] [ar9300] loaded [...] [ar5212] loaded [...] [ar5416] loaded [...] [ar5211] loaded [...] [ar5210] loaded [...] [ath] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ACRSYS ACRPRDCT> on motherboard [...] acpi0: Power Button (fixed) [...] acpi0: _OSC failed: AE_BUFFER_OVERFLOW [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] attimer0: Can't map interrupt. [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x10> port 0x62,0x66 on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0x9400-0x94ff mem 0xd0000000-0xdfffffff,0xf0100000-0xf010ffff,0xf0000000-0xf00fffff at device 5.0 on pci1 [...] vgapci0: Boot video device [...] pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] ath0: <Atheros 5424/2424> mem 0xf0200000-0xf020ffff irq 18 at device 0.0 on pci2 [...] ath0: AR2425 mac 14.2 RF5424 phy 7.0 [...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00a2 [...] pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re0: <RealTek 810xE PCIe 10/100baseTX> port 0xa400-0xa4ff mem 0xcfdef000-0xcfdeffff,0xcfdf0000-0xcfdfffff irq 19 at device 0.0 on pci3 [...] re0: Using 1 MSI-X message [...] re0: turning off MSI enable bit. [...] re0: ASPM disabled [...] re0: Chip rev. 0x24800000 [...] re0: MAC rev. 0x00200000 [...] miibus0: <MII bus> on re0 [...] rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0 [...] rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] ahci0: <AMD SB600 AHCI SATA controller> port 0x8440-0x8447,0x8434-0x8437,0x8438-0x843f,0x8430-0x8433,0x8400-0x840f mem 0xf0507000-0xf05073ff irq 22 at device 18.0 on pci0 [...] ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported [...] ahci0: quirks=0x7000<NOMSI,ATI_PMP_BUG,MAXIO_64K> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ohci0: <OHCI (generic) USB controller> mem 0xf0504000-0xf0504fff irq 16 at device 19.0 on pci0 [...] usbus0 on ohci0 [...] ohci1: <OHCI (generic) USB controller> mem 0xf0505000-0xf0505fff irq 17 at device 19.1 on pci0 [...] usbus1 on ohci1 [...] ohci2: <OHCI (generic) USB controller> mem 0xf0506000-0xf0506fff irq 18 at device 19.4 on pci0 [...] usbus2 on ohci2 [...] ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf0507400-0xf05074ff irq 19 at device 19.5 on pci0 [...] ehci0: AMD SB600/700 quirk applied [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] atapci0: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8420-0x842f at device 20.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] hdac0: <ATI SB600 HDA Controller> mem 0xf0500000-0xf0503fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz0: _CRT value is absurd, ignored (200.1C) [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] psm0: model Synaptics Touchpad, device ID 0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xcd7ff,0xcd800-0xce7ff pnpid ORM0000 on isa0 [...] powernow0: <PowerNow! K8> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC268 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC268 Audio Function Group> at nid 1 on hdacc0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] pcm0: <Realtek ALC268 (Analog 2.0+HP/2.0)> at nid 20,21 and 25 on hdaa0 [...] pcm1: <Realtek ALC268 (Left Analog Mic)> at nid 24 on hdaa0 [...] ugen0.1: <ATI OHCI root HUB> at usbus0 [...] uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] ugen1.1: <ATI OHCI root HUB> at usbus1 [...] uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] ugen2.1: <ATI OHCI root HUB> at usbus2 [...] uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] ugen3.1: <ATI EHCI root HUB> at usbus3 [...] uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] Trying to mount root from ufs:/dev/ada0s1a [rw]... [...] Root mount waiting for: CAM usbus0 usbus1 usbus2 usbus3 [...] (aprobe2:ahcich2:0:15:0): NOP FLUSHQUEUE. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 [...] (aprobe2:ahcich2:0:15:0): CAM status: Command timeout [...] (aprobe2:ahcich2:0:15:0): Error 5, Retries exhausted [...] (aprobe0:ahcich0:0:15:0): NOP FLUSHQUEUE. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 [...] (aprobe0:ahcich0:0:15:0): CAM status: Command timeout [...] (aprobe0:ahcich0:0:15:0): Error 5, Retries exhausted [...] (aprobe0:ahcich0:0:15:0): NOP FLUSHQUEUE. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 [...] (aprobe0:ahcich0:0:15:0): CAM status: Command timeout [...] (aprobe0:ahcich0:0:15:0): Error 5, Retries exhausted [...] uhub0: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <WDC WD1600BEVT-22ZCT0 11.01A11> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 152627MB (312581808 512 byte sectors) [...] cd0 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] cd0: <TSSTcorp CDDVDW TS-L633A AC00> Removable CD-ROM SCSI device [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] Root mount waiting for: usbus3 [...] Root mount waiting for: usbus3 [...] Root mount waiting for: usbus3 [...] uhub3: 10 ports with 10 removable, self powered [...] Root mount waiting for: usbus3 [...] Root mount waiting for: usbus3 [...] ugen3.2: <PNY Technologies USB 2.0 FD> at usbus3 [...] umass0 on uhub3 [...] umass0: <PNY Technologies USB 2.0 FD, class 0/0, rev 2.00/11.00, addr 2> on usbus3 [...] umass0: SCSI over Bulk-Only; quirks = 0x8100 [...] umass0:5:0: Attached to scbus5 [...] da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 [...] da0: <PNY USB 2.0 FD 1100> Removable Direct Access SPC-2 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 7788MB (15950592 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] GEOM: da0: the secondary GPT table is corrupt or invalid. [...] GEOM: da0: using the primary only -- recovery suggested. [...] GEOM: iso9660/12_2_RELEASE_AMD64_CD: the secondary GPT table is corrupt or invalid. [...] GEOM: iso9660/12_2_RELEASE_AMD64_CD: using the primary only -- recovery suggested. [...] GEOM: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXX the secondary GPT table is corrupt or invalid. [...] GEOM: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXX using the primary only -- recovery suggested. [...] mountroot: waiting for device /dev/ada0s1a... [...] info: [drm] Initialized drm 1.1.0 20060810 [...] drmn0: ======================================================= [...] drmn0: This code is deprecated. Install the graphics/drm-kmod pkg [...] drmn0: ======================================================= [...] drmn0: Deprecated code (to be removed in FreeBSD 13): drm2 drivers [...] drmn0: ======================================================= [...] drmn0: This code is deprecated. Install the graphics/drm-kmod pkg [...] drmn0: ======================================================= [...] drmn0: Deprecated code (to be removed in FreeBSD 13): drm2 drivers [...] drmn0: <ATI Radeon RS690 X1270 IGP> on vgapci0 [...] info: [drm] RADEON_IS_PCI [...] info: [drm] initializing kernel modesetting (RS690 0x1002:0x791F 0x107B:0x0184). [...] info: [drm] register mmio base: 0xF0100000 [...] info: [drm] register mmio size: 65536 [...] info: [drm] radeon_atrm_get_bios: ===> Try ATRM... [...] info: [drm] radeon_atrm_get_bios: IGP card detected, skipping this method... [...] info: [drm] radeon_acpi_vfct_bios: ===> Try VFCT... [...] info: [drm] radeon_acpi_vfct_bios: Get "VFCT" ACPI table [...] info: [drm] radeon_acpi_vfct_bios: Failed to get "VFCT" table: AE_NOT_FOUND [...] info: [drm] igp_read_bios_from_vram: ===> Try IGP's VRAM... [...] info: [drm] igp_read_bios_from_vram: VRAM base address: 0xd0000000 [...] info: [drm] igp_read_bios_from_vram: Map address: 0xfffff800d0000000 (262144 bytes) [...] info: [drm] igp_read_bios_from_vram: Incorrect BIOS signature: 0x0000 [...] info: [drm] radeon_read_bios: ===> Try PCI Expansion ROM... [...] info: [drm] radeon_read_bios: Map address: 0xfffff800000c0000 (131072 bytes) [...] info: [drm] ATOM BIOS: ATI [...] drmn0: info: VRAM: 256M 0x00000000B0000000 - 0x00000000BFFFFFFF (256M used) [...] drmn0: info: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF [...] info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [...] info: [drm] Driver supports precise vblank timestamp query. [...] info: [drm] MSI enabled 1 message(s) [...] drmn0: info: radeon: using MSI. [...] info: [drm] radeon: irq initialized. [...] info: [drm] Detected VRAM RAM=256M, BAR=256M [...] info: [drm] RAM width 128bits DDR [...] [TTM] Zone kernel: Available graphics memory: 1421780 kiB [...] [TTM] Initializing pool allocator [...] info: [drm] radeon: 256M of VRAM memory ready [...] info: [drm] radeon: 512M of GTT memory ready. [...] info: [drm] GART: num cpu pages 131072, num gpu pages 131072 [...] info: [drm] radeon: 1 quad pipes, 1 z pipes initialized. [...] info: [drm] PCIE GART of 512M enabled (table at 0x0000000026728000). [...] drmn0: info: WB enabled [...] drmn0: info: fence driver on ring 0 use gpu addr 0x0000000080000000 and cpu addr 0x0xfffff8001758b000 [...] info: [drm] Loading RS690/RS740 Microcode [...] info: [drm] radeon: ring at 0x0000000080001000 [...] error: [drm:pid98:r100_ring_test] *ERROR* radeon: ring test failed (scratch(0x15E4)=0xCAFEDEAD) [...] error: [drm:pid98:r100_cp_init] *ERROR* radeon: cp isn't working (-22). [...] drmn0: error: failed initializing CP (-22). [...] drmn0: error: Disabling GPU acceleration [...] error: [drm:pid98:r100_cp_fini] *ERROR* Wait for CP idle timeout, shutting down CP. [...] error: [drm:pid98:r100_cp_disable] *ERROR* Failed to wait GUI idle while programming pipes. Bad things might happen. [...] info: [drm] radeon: cp finalized [...] info: [drm] radeon_device_init: Taking over the fictitious range 0xd0000000-0xe0000000 [...] radeon_iicbb0 on drmn0 [...] iicbus0: <Philips I2C bus> on iicbb0 addr 0xff [...] iic0: <I2C generic I/O> on iicbus0 [...] radeon_iicbb1 on drmn0 [...] iicbus1: <Philips I2C bus> on iicbb1 addr 0xff [...] iic1: <I2C generic I/O> on iicbus1 [...] radeon_iicbb2 on drmn0 [...] iicbus2: <Philips I2C bus> on iicbb2 addr 0xff [...] iic2: <I2C generic I/O> on iicbus2 [...] radeon_iicbb3 on drmn0 [...] iicbus3: <Philips I2C bus> on iicbb3 addr 0xff [...] iic3: <I2C generic I/O> on iicbus3 [...] info: [drm] Radeon Display Connectors [...] info: [drm] Connector 0: [...] info: [drm] VGA-1 [...] info: [drm] DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7e4c [...] info: [drm] Encoders: [...] info: [drm] CRT1: INTERNAL_KLDSCP_DAC1 [...] info: [drm] Connector 1: [...] info: [drm] LVDS-1 [...] info: [drm] DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c [...] info: [drm] Encoders: [...] info: [drm] LCD1: INTERNAL_LVTM1 [...] info: [drm] Connector VGA-1: get mode from tunables: [...] info: [drm] - kern.vt.fb.modes.VGA-1 [...] info: [drm] - kern.vt.fb.default_mode [...] info: [drm] Connector LVDS-1: get mode from tunables: [...] info: [drm] - kern.vt.fb.modes.LVDS-1 [...] info: [drm] - kern.vt.fb.default_mode [...] info: [drm] fb mappable at 0xD0040000 [...] info: [drm] vram apper at 0xD0000000 [...] info: [drm] size 4096000 [...] info: [drm] fb depth is 24 [...] info: [drm] pitch is 5120 [...] fbd0 on drmn0 [...] VT: Replacing driver "vga" with new "fb". [...] info: [drm] Initialized radeon 2.29.0 20080528 for drmn0 on minor 0 [...] intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> port 0x8410-0x841f at device 20.0 on pci0 [...] intsmb0: intr SMI enabled revision 0 [...] intsmb0: using polling mode when configured interrupt is SMI [...] smbus0: <System Management Bus> on intsmb0 [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] wlan0: link state changed to UP [...] re0: link state changed to DOWN [...] ugen3.2: <PNY Technologies USB 2.0 FD> at usbus3 (disconnected) [...] umass0: at uhub3, port 1, addr 2 (disconnected) [...] da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 [...] da0: <PNY USB 2.0 FD 1100> s/n ... detached [...] (da0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] ugen0.2: <LXD Gaming Mouse> at usbus0 [...] ums0 on uhub0 [...] ums0: <LXD Gaming Mouse, class 0/0, rev 1.10/1.07, addr 2> on usbus0 [...] ums0: 5 buttons and [XYZ] coordinates ID=1 [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] pid 7948 (gzdoom), jid 0, uid 1001: exited on signal 6 (core dumped) [...] pid 7963 (gzdoom), jid 0, uid 1001: exited on signal 6 (core dumped) [...] pid 7976 (gzdoom), jid 0, uid 1001: exited on signal 6 (core dumped) [...] pid 7985 (gzdoom), jid 0, uid 1001: exited on signal 6 (core dumped)