[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248053-232cb14f501 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz (2926.17-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x1067a Family=0x6 Model=0x17 Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0xc08e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,OSXSAVE> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] VT-x: HLT,PAUSE [...] TSC: P-state invariant, performance statistics [...] real memory = 4299161600 (4100 MB) [...] avail memory = 4032827392 (3846 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <COMPAQ BEARLAKE> [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] ioapic0: MADT APIC ID 1 != hw id 0 [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] aesni0: No AES or SHA support. [...] acpi0: <HPQOEM SLIC-BPC> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] device_attach: hpet0 attach returned 12 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] Firmware Error (ACPI): \134_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20201113/nsarguments-311) [...] Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20201113/dsfield-352) [...] ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20201113/dswload2-639) [...] ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20201113/psparse-689) [...] pcib0: _OSC failed: AE_ALREADY_EXISTS [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x3230-0x3237 mem 0xf0100000-0xf017ffff,0xe0000000-0xefffffff,0xf0000000-0xf00fffff irq 16 at device 2.0 on pci0 [...] agp0: <Intel Q35 SVGA controller> on vgapci0 [...] WARNING: Device "agp" is Giant locked and may be deleted before FreeBSD 14.0. [...] agp0: aperture size is 256M, detected 6140k stolen memory [...] vgapci0: Boot video device [...] pci0: <simple comms> at device 3.0 (no driver attached) [...] atapci0: <Intel ATA controller> port 0x3238-0x323f,0x3270-0x3273,0x3240-0x3247,0x3274-0x3277,0x31e0-0x31ef irq 18 at device 3.2 on pci0 [...] ata2: <ATA channel> at channel 0 on atapci0 [...] ata3: <ATA channel> at channel 1 on atapci0 [...] pci0: <simple comms, UART> at device 3.3 (no driver attached) [...] em0: <Intel(R) 82566DM-2 ICH9 AMT> port 0x3100-0x311f mem 0xf0180000-0xf019ffff,0xf01a5000-0xf01a5fff irq 19 at device 25.0 on pci0 [...] em0: EEPROM V1.3-1 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] uhci0: <Intel 82801I (ICH9) USB controller> port 0x3120-0x313f irq 20 at device 26.0 on pci0 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801I (ICH9) USB controller> port 0x3140-0x315f irq 21 at device 26.1 on pci0 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801I (ICH9) USB controller> port 0x3160-0x317f irq 22 at device 26.2 on pci0 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf01a6000-0xf01a63ff irq 22 at device 26.7 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel 82801I HDA Controller> mem 0xf01a0000-0xf01a3fff irq 21 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0 [...] Firmware Error (ACPI): \134_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20201113/nsarguments-311) [...] Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20201113/dsfield-352) [...] ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20201113/dswload2-639) [...] ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20201113/psparse-689) [...] pcib0: _OSC failed: AE_ALREADY_EXISTS [...] pci1: <ACPI PCI bus> on pcib1 [...] re0: <RealTek 8168 Gigabit Ethernet> port 0x2100-0x21ff mem 0xf0404000-0xf0404fff,0xf0400000-0xf0403fff irq 16 at device 0.0 on pci1 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib2: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0 [...] Firmware Error (ACPI): \134_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20201113/nsarguments-311) [...] Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20201113/dsfield-352) [...] ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20201113/dswload2-639) [...] ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20201113/psparse-689) [...] pcib0: _OSC failed: AE_ALREADY_EXISTS [...] pci2: <ACPI PCI bus> on pcib2 [...] re1: <RealTek 8168 Gigabit Ethernet> port 0x1100-0x11ff mem 0xf0304000-0xf0304fff,0xf0300000-0xf0303fff irq 17 at device 0.0 on pci2 [...] re1: Using 1 MSI-X message [...] re1: Chip rev. 0x54000000 [...] re1: MAC rev. 0x00100000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] uhci3: <Intel 82801I (ICH9) USB controller> port 0x3180-0x319f irq 20 at device 29.0 on pci0 [...] usbus4 on uhci3 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] uhci4: <Intel 82801I (ICH9) USB controller> port 0x31a0-0x31bf irq 21 at device 29.1 on pci0 [...] usbus5 on uhci4 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf01a6400-0xf01a67ff irq 20 at device 29.7 on pci0 [...] usbus6: EHCI version 1.0 [...] usbus6 on ehci1 [...] usbus6: 480Mbps High Speed USB v2.0 [...] pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ral0: <Ralink Technology RT2561S> mem 0xf0200000-0xf0207fff irq 20 at device 4.0 on pci3 [...] ral0: MAC/BBP RT2561C, RF RT2527 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci1: <Intel ICH9 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x31f0-0x31ff,0x3200-0x320f irq 18 at device 31.2 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci1 [...] ata1: <ATA channel> at channel 1 on atapci1 [...] atapci2: <Intel ICH9 SATA300 controller> port 0x3260-0x3267,0x3280-0x3283,0x3268-0x326f,0x3284-0x3287,0x3210-0x321f,0x3220-0x322f irq 18 at device 31.5 on pci0 [...] ata4: <ATA channel> at channel 0 on atapci2 [...] ata5: <ATA channel> at channel 1 on atapci2 [...] acpi_button0: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 [...] fdc0: does not respond [...] device_attach: fdc0 attach returned 6 [...] fdc0: No FDOUT register! [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1463000917 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Analog Devices AD1884 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Analog Devices AD1884 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Analog Devices AD1884 (Rear Analog)> at nid 18 and 21 on hdaa0 [...] pcm1: <Analog Devices AD1884 (Front Analog)> at nid 17 and 20 on hdaa0 [...] ugen6.1: <Intel EHCI root HUB> at usbus6 [...] ugen5.1: <Intel UHCI root HUB> at usbus5 [...] uhub0 on usbus6 [...] uhub1 on usbus5 [...] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 [...] ugen4.1: <Intel UHCI root HUB> at usbus4 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] uhub2 on usbus4 [...] uhub3 on usbus2 [...] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] uhub4 on usbus1 [...] uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub5 on usbus0 [...] uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] uhub6 on usbus3 [...] uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] Root mount waiting for: CAM usbus0 usbus1 usbus2 usbus3 usbus4 usbus5 usbus6 [...] uhub3: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub5: 2 ports with 2 removable, self powered [...] uhub4: 2 ports with 2 removable, self powered [...] Root mount waiting for: CAM usbus3 usbus6 [...] uhub0: 4 ports with 4 removable, self powered [...] uhub6: 6 ports with 6 removable, self powered [...] Root mount waiting for: CAM usbus3 [...] Root mount waiting for: CAM [...] ugen2.2: <USB usb keyboard> at usbus2 [...] ukbd0 on uhub3 [...] ukbd0: <USB usb keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus2 [...] kbd2 at ukbd0 [...] ada0 at ata0 bus 0 scbus2 target 0 lun 0 [...] ada0: <SAMSUNG SSD PB22-JS3 FDE 2.5" 128GB VBM9LD1Q> ATA-7 SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 512bytes) [...] ada0: 122104MB (250069680 512 byte sectors) [...] mountroot: waiting for device /dev/gpt/rootfs... [...] em0: link state changed to UP [...] debugnet_any_ifnet_update: Bad dn_init result from em0 (ifp 0xfffff8000359e800), ignoring. [...] re0: link state changed to UP [...] re1: link state changed to DOWN [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] device_attach: hpet0 attach returned 12 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMID.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] driver bug: Unable to set devclass (class: ppc devname: (unknown)) [...] driver bug: Unable to set devclass (class: uart devname: (unknown)) [...] driver bug: Unable to set devclass (class: fdc devname: (unknown)) [...] uhid0 on uhub3 [...] uhid0: <USB usb keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus2 [...] lo0: link state changed to UP [...] em0: link state changed to DOWN [...] re0: link state changed to DOWN [...] em0: link state changed to UP [...] re0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] wlan0: Ethernet address: ... [...] wlan0: changing name to 'ral0_wlan1' [...] wlan0: Ethernet address: ... [...] wlan0: changing name to 'ral0_wlan1' [...] ral0: need multicast update callback [...] ral0_wlan1: ieee80211_new_state_locked: pending RUN -> SCAN transition lost [...] ral0: need multicast update callback [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] re0: link state changed to DOWN [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] re0: link state changed to UP [...] em0: link state changed to DOWN [...] em0: link state changed to UP