[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p7 stable/23.1-n250411-85724e9ce22 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Xeon(R) CPU X5670 @ 2.93GHz (3685.12-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206c2 Family=0x6 Model=0x2c Stepping=2 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 21474836480 (20480 MB) [...] avail memory = 20789121024 (19826 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <091911 APIC1447> [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic1: MADT APIC ID 7 != hw id 8 [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-47 [...] Launching APs: 1 7 9 10 5 3 11 6 2 4 8 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xfbe00-0xfbe1e [...] smbios0: Version: 2.5, BCD Revision: 2.5 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <091911 XSDT1447> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached) [...] pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached) [...] pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached) [...] pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached) [...] uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xc800-0xc81f irq 16 at device 26.0 on pci0 [...] uhci0: LegSup = 0x2f00 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xc880-0xc89f irq 21 at device 26.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xcc00-0xcc1f irq 19 at device 26.2 on pci0 [...] uhci2: LegSup = 0x2f00 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xfbcff000-0xfbcff3ff irq 18 at device 26.7 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 [...] pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci4: <ACPI PCI bus> on pcib5 [...] mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfbefc000-0xfbefffff irq 18 at device 0.0 on pci4 [...] msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03> on mskc0 [...] msk0: Using defaults for TSO: 65518/35/2048 [...] msk0: Ethernet address: ... [...] miibus0: <MII bus> on msk0 [...] e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0 [...] e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 [...] pcib6: Data Link Layer inactive [...] pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 [...] pci5: <ACPI PCI bus> on pcib7 [...] mskc1: <Marvell Yukon 88E8056 Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfbdfc000-0xfbdfffff irq 17 at device 0.0 on pci5 [...] msk1: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03> on mskc1 [...] msk1: Using defaults for TSO: 65518/35/2048 [...] msk1: Ethernet address: ... [...] miibus1: <MII bus> on msk1 [...] e1000phy1: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus1 [...] e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xc080-0xc09f irq 23 at device 29.0 on pci0 [...] uhci3: LegSup = 0x2f00 [...] usbus4 on uhci3 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xc400-0xc41f irq 19 at device 29.1 on pci0 [...] uhci4: LegSup = 0x2f00 [...] usbus5 on uhci4 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xc480-0xc49f irq 18 at device 29.2 on pci0 [...] uhci5: LegSup = 0x2f00 [...] usbus6 on uhci5 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xfbcfe000-0xfbcfe3ff irq 23 at device 29.7 on pci0 [...] usbus7: EHCI version 1.0 [...] usbus7 on ehci1 [...] usbus7: 480Mbps High Speed USB v2.0 [...] pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib8 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel ICH10 AHCI SATA controller> port 0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb41f mem 0xfbcfc000-0xfbcfc7ff irq 20 at device 31.2 on pci0 [...] ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0. [...] psm0: model Generic PS/2 mouse, device ID 0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1842499830 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ugen7.1: <Intel EHCI root HUB> at usbus7 [...] uhub0 on usbus7 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 [...] ugen4.1: <Intel UHCI root HUB> at usbus4 [...] ugen5.1: <Intel UHCI root HUB> at usbus5 [...] uhub1 on usbus4 [...] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] uhub2 on usbus5 [...] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] uhub3 on usbus2 [...] uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] uhub4 on usbus3 [...] uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub5 on usbus1 [...] uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] ugen6.1: <Intel UHCI root HUB> at usbus6 [...] uhub6 on usbus0 [...] uhub7 on usbus6 [...] uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich4 bus 0 scbus4 target 0 lun 0 [...] ada0: <KINGSTON SA400S37240G S1Z40102> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] ses0: ada0,pass0 in 'Slot 04', SATA Slot: scbus4 target 0 [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub5: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] uhub6: 2 ports with 2 removable, self powered [...] uhub7: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus3 usbus7 [...] Root mount waiting for: usbus3 usbus7 [...] uhub0: 6 ports with 6 removable, self powered [...] uhub4: 6 ports with 6 removable, self powered