[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE #0 stable/13-n248872-2c7441c86ef: Thu Jan 6 02:34:00 UTC 2022 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Pentium(R) Dual-Core CPU E5800 @ 3.20GHz (3214.51-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x1067a Family=0x6 Model=0x17 Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0xc00e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE,OSXSAVE> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] VT-x: HLT,PAUSE [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8247140352 (7865 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <A_M_I_ OEMAPIC > [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] vtvga0: <VT VGA driver> [...] aesni0: No AES or SHA support. [...] acpi0: <A_M_I_ OEMXSDT> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfe9ff000-0xfe9fffff,0xfdefc000-0xfdefffff irq 16 at device 0.0 on pci1 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x2c000000 [...] re0: MAC rev. 0x00200000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] vgapci0: <VGA-compatible display> port 0xcc00-0xcc07 mem 0xfe400000-0xfe7fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] agp0: <Intel G41 SVGA controller> on vgapci0 [...] WARNING: Device "agp" is Giant locked and may be deleted before FreeBSD 14.0. [...] agp0: aperture size is 256M, detected 32764k stolen memory [...] vgapci0: Boot video device [...] hdac0: <Intel 82801G HDA Controller> mem 0xfe8f8000-0xfe8fbfff irq 16 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib3 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfdfff000-0xfdffffff,0xfdff8000-0xfdffbfff irq 17 at device 0.0 on pci2 [...] re1: Using 1 MSI-X message [...] re1: Chip rev. 0x28000000 [...] re1: MAC rev. 0x00300000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xc400-0xc41f irq 23 at device 29.0 on pci0 [...] uhci0: LegSup = 0x2f00 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xc480-0xc49f irq 19 at device 29.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xc800-0xc81f irq 18 at device 29.2 on pci0 [...] uhci2: LegSup = 0x2f00 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xc880-0xc89f irq 16 at device 29.3 on pci0 [...] uhci3: LegSup = 0x2f00 [...] usbus3 on uhci3 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe8f7c00-0xfe8f7fff irq 23 at device 29.7 on pci0 [...] usbus4: EHCI version 1.0 [...] usbus4 on ehci0 [...] usbus4: 480Mbps High Speed USB v2.0 [...] pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib4 [...] pcib5: <PCI-PCI bridge> irq 19 at device 0.0 on pci3 [...] pci4: <PCI bus> on pcib5 [...] xhci0: <NEC uPD720202 USB 3.0 controller> mem 0xfebfe000-0xfebfffff irq 19 at device 0.0 on pci4 [...] xhci0: 64 bytes context size, 64-bit DMA [...] usbus5 on xhci0 [...] usbus5: 5.0Gbps Super Speed USB v3.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] atapci1: <Intel ICH7 SATA300 controller> port 0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb80f irq 23 at device 31.2 on pci0 [...] ata2: <ATA channel> at channel 0 on atapci1 [...] ata3: <ATA channel> at channel 1 on atapci1 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1607217231 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] ugen4.1: <Intel EHCI root HUB> at usbus4 [...] uhub0 on usbus0 [...] uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus4 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 [...] ugen3.1: <Intel UHCI root HUB> at usbus3 [...] ugen5.1: <0x1912 XHCI root HUB> at usbus5 [...] uhub2 on usbus3 [...] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] uhub3 on usbus5 [...] uhub3: <0x1912 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus5 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] uhub4 on usbus1 [...] uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub5 on usbus2 [...] uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] hdacc0: <VIA VT1708S_4 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <VIA VT1708S_4 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <VIA VT1708S_4 (Analog 2.0+HP/2.0)> at nid 28,29 and 26,30,31,27 on hdaa0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 usbus1 usbus2 usbus3 usbus4 usbus5 CAM [...] uhub3: 4 ports with 4 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub4: 2 ports with 2 removable, self powered [...] uhub5: 2 ports with 2 removable, self powered [...] ada0 at ata2 bus 0 scbus1 target 0 lun 0 [...] ada0: <Hitachi HDS721010CLA332 JP4OA3MA> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) [...] ada0: 953869MB (1953525168 512 byte sectors) [...] ada1 at ata3 bus 0 scbus2 target 0 lun 0 [...] ada1: <Hitachi HDT721010SLA360 ST6OA31B> ATA8-ACS SATA 2.x device [...] ada1: Serial Number... [...] ada1: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) [...] ada1: 953869MB (1953525168 512 byte sectors) [...] ada2 at ata3 bus 0 scbus2 target 1 lun 0 [...] ada2: <Hitachi HDT721010SLA360 ST6OA31B> ATA8-ACS SATA 2.x device [...] ada2: Serial Number... [...] ada2: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) [...] ada2: 953869MB (1953525168 512 byte sectors) [...] cd0 at ata2 bus 0 scbus1 target 1 lun 0 [...] cd0: <Optiarc DVD RW AD-7260S 1.03> Removable CD-ROM SCSI device [...] cd0: 150.000MB/s transfers (SATA, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Incompatible medium installed [...] Root mount waiting for: usbus4 [...] Root mount waiting for: usbus4 [...] uhub1: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus4 [...] ugen0.2: <Cherry USB keyboard> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Cherry USB keyboard, class 0/0, rev 2.00/1.03, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] ugen1.2: <Logitech USB Receiver> at usbus1 [...] ukbd1 on uhub4 [...] ukbd1: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 2> on usbus1 [...] kbd3 at ukbd1 [...] GEOM_ELI: Device ada0p2.eli created. [...] GEOM_ELI: Encryption: AES-XTS 128 [...] GEOM_ELI: Crypto: software [...] GEOM_ELI: Device ada1p2.eli created. [...] GEOM_ELI: Encryption: AES-XTS 128 [...] GEOM_ELI: Crypto: software [...] warning: total configured swap (8388608 pages) exceeds maximum recommended amount (8082416 pages). [...] warning: increase kern.maxswzone or reduce amount of swap. [...] GEOM_ELI: Device ada2p2.eli created. [...] GEOM_ELI: Encryption: AES-XTS 128 [...] GEOM_ELI: Crypto: software [...] warning: total configured swap (12582912 pages) exceeds maximum recommended amount (8082416 pages). [...] warning: increase kern.maxswzone or reduce amount of swap. [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] re1: link state changed to UP [...] uhid0 on uhub0 [...] uhid0: <Cherry USB keyboard, class 0/0, rev 2.00/1.03, addr 2> on usbus0 [...] ums0 on uhub4 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 2> on usbus1 [...] ums0: 18 buttons and [XYZT] coordinates ID=2 [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] lo0: link state changed to DOWN [...] lo0: link state changed to UP [...] re1: link state changed to DOWN [...] re1: link state changed to UP [...] [drm] radeon kernel modesetting enabled.