[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.0-RELEASE-p3 #0: Mon Dec 11 04:56:01 UTC 2023 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (2400.22-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x6fb Family=0x6 Model=0xf Stepping=11 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] VT-x: HLT,PAUSE [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 4104425472 (3914 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <A_M_I_ OEMAPIC > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 3 1 2 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xfb6e0-0xfb6fe [...] smbios0: Version: 2.5 [...] aesni0: No AES or SHA support. [...] acpi0: <A_M_I_ OEMRSDT> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xa000-0xa0ff mem 0xd0000000-0xdfffffff,0xfe7c0000-0xfe7dffff irq 16 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <ATI RV810 HDA Controller> mem 0xfe7fc000-0xfe7fffff irq 17 at device 0.1 on pci1 [...] uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0x9800-0x981f irq 16 at device 26.0 on pci0 [...] uhci0: LegSup = 0x2f00 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0x9880-0x989f irq 21 at device 26.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0x9c00-0x9c1f irq 18 at device 26.2 on pci0 [...] uhci2: LegSup = 0x2f00 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xfe6ffc00-0xfe6fffff irq 18 at device 26.7 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel 82801JI HDA Controller> mem 0xfe6f8000-0xfe6fbfff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib3 [...] em0: <Intel(R) Gigabit CT 82574L> port 0xdc00-0xdc1f mem 0xfeae0000-0xfeafffff,0xfea00000-0xfea7ffff,0xfeadc000-0xfeadffff irq 18 at device 0.0 on pci2 [...] em0: EEPROM V1.8-0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using 2 RX queues 2 TX queues [...] em0: Using MSI-X interrupts with 3 vectors [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib4 [...] atapci0: <Marvell 88SE6121 UDMA133 controller> port 0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc807,0xc480-0xc483,0xc400-0xc40f mem 0xfe9ffc00-0xfe9fffff irq 16 at device 0.0 on pci3 [...] ahci0: <Marvell 88SE6121 AHCI SATA controller> at channel -1 on atapci0 [...] ahci0: AHCI v1.00 with 2 3Gbps ports, Port Multiplier not supported [...] ahci0: quirks=0x457<NOFORCE,NOPMP,NONCQ,2CH,EDGEIS,NOCOUNT> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ata2: <ATA channel> at channel 0 on atapci0 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 [...] pci4: <ACPI PCI bus> on pcib5 [...] mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> port 0xb800-0xb8ff mem 0xfe8fc000-0xfe8fffff irq 17 at device 0.0 on pci4 [...] msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03> on mskc0 [...] msk0: Using defaults for TSO: 65518/35/2048 [...] msk0: Ethernet address: ... [...] miibus0: <MII bus> on msk0 [...] e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0 [...] e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0x9080-0x909f irq 23 at device 29.0 on pci0 [...] uhci3: LegSup = 0x2f00 [...] usbus4 on uhci3 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0x9400-0x941f irq 19 at device 29.1 on pci0 [...] uhci4: LegSup = 0x2f00 [...] usbus5 on uhci4 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0x9480-0x949f irq 18 at device 29.2 on pci0 [...] uhci5: LegSup = 0x2f00 [...] usbus6 on uhci5 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xfe6ff800-0xfe6ffbff irq 23 at device 29.7 on pci0 [...] usbus7: EHCI version 1.0 [...] usbus7 on ehci1 [...] usbus7: 480Mbps High Speed USB v2.0 [...] pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib6 [...] skc0: <Marvell Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfebfc000-0xfebfffff irq 18 at device 2.0 on pci5 [...] skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) [...] sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 [...] sk0: Ethernet address: ... [...] miibus1: <MII bus> on sk0 [...] e1000phy1: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus1 [...] e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto [...] pci5: <serial bus, FireWire> at device 3.0 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci1: <Intel ICH10 SATA300 controller> port 0x8000-0x8007,0x7c00-0x7c03,0x7880-0x7887,0x7800-0x7803,0x7480-0x748f,0x7400-0x740f irq 19 at device 31.2 on pci0 [...] ata3: <ATA channel> at channel 0 on atapci1 [...] ata4: <ATA channel> at channel 1 on atapci1 [...] atapci2: <Intel ICH10 SATA300 controller> port 0x9000-0x9007,0x8c00-0x8c03,0x8880-0x8887,0x8800-0x8803,0x8480-0x848f,0x8400-0x840f irq 19 at device 31.5 on pci0 [...] ata5: <ATA channel> at channel 0 on atapci2 [...] ata6: <ATA channel> at channel 1 on atapci2 [...] acpi_button0: <Power Button> on acpi0 [...] fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd37ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1200042333 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen7.1: <Intel EHCI root HUB> at usbus7 [...] ugen6.1: <Intel UHCI root HUB> at usbus6 [...] ugen4.1: <Intel UHCI root HUB> at usbus4 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] uhub0 on usbus7 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 [...] uhub1 on usbus4 [...] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] uhub2 on usbus2 [...] uhub3 on usbus6 [...] uhub4 on usbus1 [...] uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] uhub5 on usbus3 [...] uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] ugen5.1: <Intel UHCI root HUB> at usbus5 [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] hdacc1: <Analog Devices AD1989B HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Analog Devices AD1989B Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Analog Devices AD1989B (Analog 7.1/2.0)> at nid 18,36,22,37 and 23,21,24,20 on hdaa1 [...] pcm2: <Analog Devices AD1989B (Front Analog Headphones)> at nid 17 on hdaa1 [...] pcm3: <Analog Devices AD1989B (Rear Digital)> at nid 27 on hdaa1 [...] pcm4: <Analog Devices AD1989B (Digital)> at nid 29 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] uhub6 on usbus5 [...] uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] uhub7 on usbus0 [...] uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub1: 2 ports with 2 removable, self powered [...] uhub4: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] uhub6: 2 ports with 2 removable, self powered [...] uhub7: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus3 CAM usbus7 [...] ada0 at ata3 bus 0 scbus3 target 0 lun 0 [...] ada0: <Samsung SSD 860 QVO 1TB RVQ01B6Q> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 512bytes) [...] ada0: 953869MB (1953525168 512 byte sectors) [...] ada1 at ata3 bus 0 scbus3 target 1 lun 0 [...] ada1: <ST4000DM000-1F2168 CC54> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] ada1: 3815447MB (7814037168 512 byte sectors) [...] ada1: quirks=0x1<4K> [...] ada2 at ata4 bus 0 scbus4 target 0 lun 0 [...] ada2: <Samsung SSD 850 EVO 1TB EMT02B6Q> ACS-2 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 512bytes) [...] ada2: 953869MB (1953525168 512 byte sectors) [...] ada2: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ada3 at ata4 bus 0 scbus4 target 1 lun 0 [...] ada3: <WDC WD40EZRZ-22GXCB0 80.00A80> ACS-3 ATA SATA 3.x device [...] ada3: Serial Number... [...] ada3: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) [...] ada3: 3815447MB (7814037168 512 byte sectors) [...] cd0 at ata2 bus 0 scbus2 target 0 lun 0 [...] cd0: <SONY DVD RW DW-D18A VYS2> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] uhub0: 6 ports with 6 removable, self powered [...] uhub5: 6 ports with 6 removable, self powered [...] Root mount waiting for: usbus7 [...] ugen7.2: <vendor 0x1a40 USB 2.0 Hub> at usbus7 [...] uhub8 on uhub0 [...] uhub8: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 2> on usbus7 [...] uhub8: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus7 [...] ugen7.3: <vendor 0x04d9 product 0x1203> at usbus7 [...] ukbd0 on uhub8 [...] ukbd0: <vendor 0x04d9 product 0x1203, class 0/0, rev 2.00/2.80, addr 3> on usbus7 [...] kbd2 at ukbd0 [...] ugen7.4: <Microsoft Microsoft Comfort Mouse 4500> at usbus7 [...] ichsmb0: <Intel 82801JI (ICH10) SMBus controller> port 0x400-0x41f mem 0xfe6ff400-0xfe6ff4ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] em0: link state changed to UP [...] sk0: link state changed to DOWN [...] lo0: link state changed to UP [...] em0: link state changed to DOWN [...] uhid0 on uhub8 [...] uhid0: <vendor 0x04d9 product 0x1203, class 0/0, rev 2.00/2.80, addr 3> on usbus7 [...] ums0 on uhub8 [...] ums0: <Microsoft Microsoft Comfort Mouse 4500, class 0/0, rev 2.00/0.83, addr 4> on usbus7 [...] ums0: 5 buttons and [XYZT] coordinates ID=16 [...] ums0: 0 buttons and [T] coordinates ID=0 [...] em0: link state changed to UP [...] pflog0: promiscuous mode enabled