[...] hci_softintr() at netbsd:xhci_softintr+0x4ea [...] usb_soft_intr() at netbsd:usb_soft_intr+0x25 [...] softint_dispatch() at netbsd:softint_dispatch+0x10b [...] DDB lost frame for netbsd:Xsoftintr+0x4c, trying 0xffff94042dc890f0 [...] Xsoftintr() at netbsd:Xsoftintr+0x4c [...] --- interrupt --- [...] 0: [...] cpu0: End traceback... [...] [...] dumping to dev 168,2 (offset=831, size=4123544): [...] dump succeeded [...] [...] [...] WARNING: negative runtime; monotonic clock has gone backwards [...] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [...] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [...] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 [...] The NetBSD Foundation, Inc. All rights reserved. [...] Copyright (c) 1982, 1986, 1989, 1991, 1993 [...] The Regents of the University of California. All rights reserved. [...] [...] NetBSD 10.0_BETA (GENERIC) #0: Thu Apr 20 14:20:02 UTC 2023 [...] XXX@XXX:/usr/src/sys/arch/amd64/compile/GENERIC [...] total memory = 16107 MB [...] avail memory = 15551 MB [...] timecounter: Timecounters tick every 10.000 msec [...] Kernelized RAIDframe activated [...] i915drmkms* disabled [...] RTC BIOS diagnostic error 0x3f<config_unit,memory_size,fixed_disk,invalid_time> [...] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 [...] efi: systbl at pa 73e65018 [...] mainbus0 (root) [...] ACPI: RSDP 0x0000000073262014 000024 (v02 ALASKA) [...] ACPI: XSDT 0x0000000073261728 000104 (v01 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: FACP 0x00000000731C3000 000114 (v06 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: DSDT 0x000000007314F000 073A1A (v02 ALASKA A M I 01072009 INTL 20200717) [...] ACPI: FACS 0x0000000073285000 000040 [...] ACPI: FIDT 0x000000007314E000 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [...] ACPI: SSDT 0x00000000731C5000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20200717) [...] ACPI: SSDT 0x0000000073148000 005D0B (v02 CpuRef CpuSsdt 00003000 INTL 20200717) [...] ACPI: SSDT 0x0000000073145000 002935 (v02 SaSsdt SaSsdt 00003000 INTL 20200717) [...] ACPI: SSDT 0x0000000073141000 003339 (v02 INTEL IgfxSsdt 00003000 INTL 20200717) [...] ACPI: HPET 0x00000000731C4000 000038 (v01 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: APIC 0x0000000073140000 0001DC (v05 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: MCFG 0x000000007313F000 00003C (v01 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: SSDT 0x000000007313D000 001F1A (v02 ALASKA Ther_Rvp 00001000 INTL 20200717) [...] ACPI: UEFI 0x0000000073218000 000048 (v01 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: NHLT 0x000000007313C000 00002D (v00 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: LPIT 0x000000007313B000 0000CC (v01 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: SSDT 0x0000000073137000 002A83 (v02 ALASKA PtidDevc 00001000 INTL 20200717) [...] ACPI: SSDT 0x0000000073134000 002357 (v02 ALASKA TbtTypeC 00000000 INTL 20200717) [...] ACPI: DBGP 0x0000000073133000 000034 (v01 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: DBG2 0x0000000073132000 000054 (v00 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: SSDT 0x0000000073130000 001918 (v02 ALASKA UsbCTabl 00001000 INTL 20200717) [...] ACPI: DMAR 0x000000007312F000 000088 (v02 INTEL EDK2 00000002 01000013) [...] ACPI: FPDT 0x000000007312E000 000044 (v01 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: SSDT 0x000000007312D000 00073A (v02 INTEL xh_adl_N 00000000 INTL 20200717) [...] ACPI: SSDT 0x0000000073129000 003AEA (v02 SocGpe SocGpe 00003000 INTL 20200717) [...] ACPI: SSDT 0x0000000073125000 0039DA (v02 SocCmn SocCmn 00003000 INTL 20200717) [...] ACPI: SSDT 0x0000000073124000 000144 (v02 Intel ADebTabl 00001000 INTL 20200717) [...] ACPI: BGRT 0x0000000073123000 000038 (v01 ALASKA A M I 01072009 AMI 00010013) [...] ACPI: TPM2 0x0000000073122000 00004C (v04 ALASKA A M I 00000001 AMI 00000000) [...] ACPI: PHAT 0x0000000073121000 0005F1 (v01 ALASKA A M I 00000005 MSFT 0100000D) [...] ACPI: WSMT 0x000000007313A000 000028 (v01 ALASKA A M I 01072009 AMI 00010013) [...] Firmware Error (ACPI): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS01], AE_NOT_FOUND (20221020/dswload2-206) [...] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-264) [...] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010) [...] Firmware Error (ACPI): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS02], AE_NOT_FOUND (20221020/dswload2-206) [...] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-264) [...] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010) [...] ACPI: 13 ACPI AML tables successfully acquired and loaded [...] ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins [...] cpu0 at mainbus0 apid 0 [...] cpu0: Use lfence to serialize rdtsc [...] cpu0: CPU base freq 800000000 Hz [...] cpu0: CPU max freq 3400000000 Hz [...] cpu0: TSC freq CPUID 806400000 Hz [...] cpu0: Intel(R) N100, id 0xb06e0 [...] cpu0: node 0, package 0, core 0, smt 0 [...] cpu1 at mainbus0 apid 2 [...] cpu1: Intel(R) N100, id 0xb06e0 [...] cpu1: node 0, package 0, core 1, smt 0 [...] cpu2 at mainbus0 apid 4 [...] cpu2: Intel(R) N100, id 0xb06e0 [...] cpu2: node 0, package 0, core 2, smt 0 [...] cpu3 at mainbus0 apid 6 [...] cpu3: Intel(R) N100, id 0xb06e0 [...] cpu3: node 0, package 0, core 3, smt 0 [...] acpi0 at mainbus0: Intel ACPICA 20221020 [...] acpi0: X/RSDT: OemId <ALASKA, A M I ,01072009>, AslId <AMI ,01000013> [...] acpi0: MCFG: segment 0, bus 0-255, address 0x00000000c0000000 [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFC3C4770A4488 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20200717) [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFC3C475011608 0001A3 (v02 PmRef Cpu0Ist 00003000 INTL 20200717) [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFC3C475011808 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20200717) [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFD2801EF3F000 001BAF (v02 PmRef ApIst 00003000 INTL 20200717) [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFD2801EF42000 001349 (v02 PmRef ApPsd 00003000 INTL 20200717) [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFC3C11A1A9008 000FBB (v02 PmRef ApCst 00003000 INTL 20200717) [...] acpi0: SCI interrupting at int 9 [...] acpi0: fixed power button present [...] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 [...] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) [...] timecounter: Timecounter "hpet0" frequency 19200000 Hz quality 2000 [...] acpiec0 at acpi0 (H_EC, PNP0C09-1): not present [...] attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0 [...] acpivga0 at acpi0 (GFX0): ACPI Display Adapter [...] acpiout0 at acpivga0 (DD01, 0x0001): ACPI Display Output Device [...] acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output Device [...] acpiout2 at acpivga0 (DD03, 0x0003): ACPI Display Output Device [...] acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output Device [...] acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device [...] acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device [...] acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device [...] acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device [...] acpiout8 at acpivga0 (DD09, 0x0009): ACPI Display Output Device [...] acpiout9 at acpivga0 (DD0A, 0x000a): ACPI Display Output Device [...] acpiout10 at acpivga0 (DD0B, 0x000b): ACPI Display Output Device [...] acpiout11 at acpivga0 (DD0C, 0x000c): ACPI Display Output Device [...] acpiout12 at acpivga0 (DD0D, 0x000d): ACPI Display Output Device [...] acpiout13 at acpivga0 (DD0E, 0x000e): ACPI Display Output Device [...] acpiout14 at acpivga0 (DD0F, 0x000f): ACPI Display Output Device [...] acpiout15 at acpivga0 (DD1F, 0x001f): ACPI Display Output Device [...] acpiout15: brightness levels: [0-100] [...] acpiout16 at acpivga0 (DD2F, 0x001f): ACPI Display Output Device [...] acpiout16: brightness levels: [0-100] [...] acpivga0: connected output devices: [...] acpivga0: 0x0000: Unknown Output Device, head 0, bios detect [...] acpivga0: 0x0000: Unknown Output Device, head 0, bios detect [...] AWAC (ACPI000E) at acpi0 not configured [...] igpio0 at acpi0 (GPI0, INTC1057): mem 0xfd6e0000-0xfd6effff,0xfd6d0000-0xfd6dffff,0xfd6a0000-0xfd6affff,0xfd690000-0xfd69ffff irq 14 [...] gpio0 at igpio0: 257 pins [...] PTHH (INTC1001) at acpi0 not configured [...] acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button [...] acpiwmi0 at acpi0 (WFDE, PNP0C14-DSarDev): ACPI WMI Interface [...] acpiwmibus at acpiwmi0 not configured [...] acpiwmi1 at acpi0 (WFTE, PNP0C14-TestDev): ACPI WMI Interface [...] acpiwmibus at acpiwmi1 not configured [...] PEPD (INT33A1) at acpi0 not configured [...] HIDD (INTC1070) at acpi0 not configured [...] acpibut1 at acpi0 (PWRB, PNP0C0C): ACPI Power Button [...] TPM (MSFT0101) at acpi0 not configured [...] acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan [...] acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan [...] acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan [...] acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan [...] acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan [...] acpitz0 at acpi0 (TZ00): cpu0 cpu1 cpu2 cpu3 [...] acpitz0: active cooling level 0: 105.0C [...] acpitz0: active cooling level 1: 55.0C [...] acpitz0: active cooling level 2: 50.0C [...] acpitz0: active cooling level 3: 45.0C [...] acpitz0: active cooling level 4: 40.0C [...] acpitz0: levels: critical 110.0 C [...] ACPI: Enabled 4 GPEs in block 00 to 7F [...] pci0 at mainbus0 bus 0: configuration mode 1 [...] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [...] pchb0 at pci0 dev 0 function 0: Intel product 461c (rev. 0x00) [...] genfb0 at pci0 dev 2 function 0: Intel product 46d1 (rev. 0x00) [...] genfb0: framebuffer at 0x4000000000, size 1920x1080, depth 32, stride 7680 [...] genfb0: shadow framebuffer enabled, size 8100 KB [...] wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation) [...] wsmux1: connecting to wsdisplay0 [...] drm at genfb0 not configured [...] Intel product 467e (miscellaneous system) at pci0 dev 8 function 0 not configured [...] Intel Alder Lake Crash Log & Telemetry (miscellaneous DASP, revision 0x01) at pci0 dev 10 function 0 not configured [...] xhci0 at pci0 dev 13 function 0: Intel product 464e (rev. 0x00) [...] xhci0: 64-bit DMA [...] xhci0: interrupting at msi0 vec 0 [...] xhci0: Unknown revision (32). Set to 3.1. [...] xhci0: xHCI version 1.20 [...] usb0 at xhci0: USB revision 3.1 [...] usb1 at xhci0: USB revision 2.0 [...] xhci1 at pci0 dev 20 function 0: Intel product 54ed (rev. 0x00) [...] xhci1: 64-bit DMA [...] xhci1: interrupting at msi1 vec 0 [...] xhci1: xHCI version 1.20 [...] usb2 at xhci1: USB revision 3.1 [...] usb3 at xhci1: USB revision 2.0 [...] Intel product 54ef (RAM memory) at pci0 dev 20 function 2 not configured [...] Intel product 54f0 (miscellaneous network) at pci0 dev 20 function 3 not configured [...] Intel product 54e0 (miscellaneous communications) at pci0 dev 22 function 0 not configured [...] ahcisata0 at pci0 dev 23 function 0: Intel product 54d3 (rev. 0x00) [...] ahcisata0: 64-bit DMA [...] ahcisata0: AHCI revision 1.31, 1 port, 32 slots, CAP 0xe534ff00<PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SALP,SSNTF,SNCQ,S64A> [...] ahcisata0: interrupting at msi2 vec 0 [...] atabus0 at ahcisata0 channel 1 [...] sdhc0 at pci0 dev 26 function 0: Intel product 54c4 (rev. 0x00) [...] sdhc0: interrupting at ioapic0 pin 16 [...] sdhc0: SDHC 3.0, rev 16, caps <546ec881/80000807>, 32-bit ADMA2, 200000 kHz, embedded slot, HS SDR50 DDR50 SDR104 HS200 1.8V, re-tuning mode 1 (128s timer), 2048 byte blocks [...] sdmmc0 at sdhc0 slot 0 [...] ppb0 at pci0 dev 29 function 0: Intel product 54b0 (rev. 0x00) [...] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x2 @ 8.0GT/s [...] pci1 at ppb0 bus 1 [...] pci1: i/o space, memory space enabled, rd/line, wr/inv ok [...] nvme0 at pci1 dev 0 function 0: Micron/Crucial Technology product 540a (rev. 0x01) [...] nvme0: NVMe 1.4 [...] nvme0: for admin queue interrupting at msix3 vec 0 [...] nvme0: CT500P3SSD8, firmware P9CR30A, serial ... [...] nvme0: for io queue 1 interrupting at msix3 vec 1 affinity to cpu0 [...] nvme0: for io queue 2 interrupting at msix3 vec 2 affinity to cpu1 [...] nvme0: for io queue 3 interrupting at msix3 vec 3 affinity to cpu2 [...] nvme0: for io queue 4 interrupting at msix3 vec 4 affinity to cpu3 [...] ld0 at nvme0 nsid 1 [...] ld0: 465 GB, 60801 cyl, 255 head, 63 sec, 512 bytes/sect x 976773168 sectors [...] ppb1 at pci0 dev 29 function 2: Intel product 54b2 (rev. 0x00) [...] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s [...] ppb1: link is x1 @ 5.0GT/s [...] pci2 at ppb1 bus 2 [...] pci2: i/o space, memory space enabled, rd/line, wr/inv ok [...] Intel I225 V Ethernet (ethernet network, revision 0x03) at pci2 dev 0 function 0 not configured [...] pcib0 at pci0 dev 31 function 0: Intel product 5481 (rev. 0x00) [...] hdaudio0 at pci0 dev 31 function 3: HD Audio Controller [...] hdaudio0: interrupting at msi4 vec 0 [...] hdaudio0: HDA ver. 1.0, OSS 9, ISS 7, BSS 0, SDO 1, 64-bit [...] hdaudio0: autoconfiguration error: no codecs found [...] hdaudio0: autoconfiguration error: device driver failed to attach [...] Intel product 54a3 (SMBus serial bus) at pci0 dev 31 function 4 not configured [...] Intel product 54a4 (miscellaneous serial bus) at pci0 dev 31 function 5 not configured [...] isa0 at pcib0 [...] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16-byte FIFO [...] pcppi0 at isa0 port 0x61 [...] spkr0 at pcppi0: PC Speaker [...] wsbell at spkr0 not configured [...] midi0 at pcppi0: PC speaker [...] sysbeep0 at pcppi0 [...] attimer1: attached to pcppi0 [...] acpicpu0 at cpu0: ACPI CPU [...] acpicpu0: C1: FFH, lat 1 us, pow 1000 mW [...] acpicpu0: C2: FFH, lat 127 us, pow 350 mW [...] acpicpu0: C3: FFH, lat 1048 us, pow 200 mW [...] acpicpu0: P0: FFH, lat 10 us, pow 6000 mW, 801 MHz, turbo boost [...] acpicpu0: P1: FFH, lat 10 us, pow 6000 mW, 800 MHz [...] acpicpu0: P2: FFH, lat 10 us, pow 5160 mW, 700 MHz [...] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105 [...] acpicpu1 at cpu1: ACPI CPU [...] coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=105 [...] acpicpu2 at cpu2: ACPI CPU [...] coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=105 [...] acpicpu3 at cpu3: ACPI CPU [...] coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=105 [...] cpu0: CPU base freq 800000000 Hz [...] cpu0: CPU max freq 3400000000 Hz [...] cpu0: TSC freq CPUID 806400000 Hz [...] cpu0: TSC freq calibrated 806401000 Hz [...] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [...] timecounter: Timecounter "TSC" frequency 806401000 Hz quality 3000 [...] uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0 [...] uhub1: 1 port with 1 removable, self powered [...] uhub2 at usb2: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0 [...] uhub2: 4 ports with 4 removable, self powered [...] uhub3 at usb3: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0 [...] uhub3: 12 ports with 12 removable, self powered [...] ld0: GPT GUID: HASH_3E8-4ABE-94B3-98E8-76F55A031680 [...] dk0 at ld0: "HASH_1FA-E749-4A24-B569-3B7CC717FFCF", 262144 blocks at 2048, type: msdos [...] dk1 at ld0: "HASH_29C-E39E-D024-A4B6-88B9D4C1B665", 943519744 blocks at 264192, type: ffs [...] dk2 at ld0: "HASH_59A-95AB-4943-C327-A49BA52A1FD6", 32989184 blocks at 943783936, type: swap [...] IPsec: Initialized Security Association Processing. [...] sdmmc0: autoconfiguration error: couldn't enable card: 60 [...] uhidev0 at uhub3 port 2 configuration 1 interface 0 [...] uhidev0: KYE SYSTEMS CORP. (0x0458) Wired Mouse (0x0186), rev 1.10/24.58, addr 1, iclass 3/1 [...] ums0 at uhidev0: 3 buttons and Z dir [...] wsmouse0 at ums0 mux 0 [...] uhidev1 at uhub3 port 2 configuration 1 interface 1 [...] uhidev1: KYE SYSTEMS CORP. (0x0458) Wired Mouse (0x0186), rev 1.10/24.58, addr 1, iclass 3/0 [...] uhidev1: autoconfiguration error: no input interrupt endpoint [...] uhidev2 at uhub3 port 3 configuration 1 interface 0 [...] uhidev2: SONiX (0x0c45) USB Keyboard (0x7663), rev 2.00/0.01, addr 2, iclass 3/1 [...] ukbd0 at uhidev2 [...] wskbd0 at ukbd0: console keyboard, using wsdisplay0 [...] uhidev3 at uhub3 port 3 configuration 1 interface 1 [...] uhidev3: SONiX (0x0c45) USB Keyboard (0x7663), rev 2.00/0.01, addr 2, iclass 3/0 [...] uhidev3: 2 report ids [...] uhid0 at uhidev3 reportid 1: input=2, output=0, feature=0 [...] uhid1 at uhidev3 reportid 2: input=1, output=0, feature=0 [...] ahcisata0 port 1: PHY offline [...] ure0 at uhub3 port 4 [...] ure0: Realtek (0x0bda) USB 10/100 LAN (0x8152), rev 2.10/20.00, addr 3 [...] ure0: RTL8152 ver 4c10 [...] rlphy0 at ure0 phy 0: RTL8201E 10/100 media interface, rev. 2 [...] rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] ure0: Ethernet address XXX [...] uaudio0 at uhub3 port 6 configuration 1 interface 0 [...] uaudio0: CSCTEK (0x0573) USB Audio and HID (0x1573), rev 2.00/80.07, addr 4 [...] uaudio0: audio rev 1.00 [...] audio0 at uaudio0: playback, capture, full duplex, independent [...] audio0: slinear_le:16 2ch 48000Hz, blk 11520 bytes (60ms) for playback [...] audio0: slinear_le:16 1ch 48000Hz, blk 6000 bytes (62.5ms) for recording [...] spkr1 at audio0: PC Speaker (synthesized) [...] wsbell at spkr1 not configured [...] uhidev4 at uhub3 port 6 configuration 1 interface 3 [...] uhidev4: CSCTEK (0x0573) USB Audio and HID (0x1573), rev 2.00/80.07, addr 4, iclass 3/0 [...] uhidev4: autoconfiguration error: no input interrupt endpoint [...] ubt0 at uhub3 port 10 [...] ubt0: vendor 8087 (0x8087) product 0026 (0x0026), rev 2.01/0.02, addr 5 [...] swwdog0: software watchdog initialized [...] WARNING: 5 errors while detecting hardware; check system log. [...] boot device: ld0 [...] root on dk1 dumps on dk2 [...] root file system type: ffs [...] kern.module.path=/stand/amd64/10.0/modules [...] wsdisplay0: screen 1 added (default, vt100 emulation) [...] wsdisplay0: screen 2 added (default, vt100 emulation) [...] wsdisplay0: screen 3 added (default, vt100 emulation) [...] wsdisplay0: screen 4 added (default, vt100 emulation) [...] uaudio0: pintr error: IOERROR [...] uaudio0: uaudio_chan_pintr: count(0) != size(1920), status(13) [...] panic: kernel diagnostic assertion "xfer == SIMPLEQ_FIRST(&pipe->up_queue)" failed: file "/usr/src/sys/dev/usb/usbdi.c", line 1142 xfer 0xffffc3c11be29a40 is not start of queue (0xffffc3c11affc678 is at start) [...] cpu0: Begin traceback... [...] vpanic() at netbsd:vpanic+0x183 [...] kern_assert() at netbsd:kern_assert+0x4b [...] usb_transfer_complete() at netbsd:usb_transfer_complete+0x44d [...] xhci_softintr() at netbsd:xhci_softintr+0x4ea [...] usb_soft_intr() at netbsd:usb_soft_intr+0x25 [...] softint_dispatch() at netbsd:softint_dispatch+0x10b [...] DDB lost frame for netbsd:Xsoftintr+0x4c, trying 0xffffd2842dc890f0 [...] Xsoftintr() at netbsd:Xsoftintr+0x4c [...] --- interrupt --- [...] 0: [...] cpu0: End traceback... [...] [...] dumping to dev 168,2 (offset=831, size=4123544): [...] dump succeeded [...] [...] [...] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [...] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [...] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 [...] The NetBSD Foundation, Inc. All rights reserved. [...] Copyright (c) 1982, 1986, 1989, 1991, 1993 [...] The Regents of the University of California. All rights reserved. [...] [...] NetBSD 10.0_BETA (GENERIC) #0: Thu Apr 20 14:20:02 UTC 2023 [...] XXX@XXX:/usr/src/sys/arch/amd64/compile/GENERIC [...] total memory = 16107 MB [...] avail memory = 15551 MB [...] timecounter: Timecounters tick every 10.000 msec [...] Kernelized RAIDframe activated [...] i915drmkms* disabled [...] RTC BIOS diagnostic error 0x3f<config_unit,memory_size,fixed_disk,invalid_time> [...] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 [...] efi: systbl at pa 73e65018 [...] mainbus0 (root) [...] ACPI: RSDP 0x0000000073262014 000024 (v02 ALASKA) [...] ACPI: XSDT 0x0000000073261728 000104 (v01 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: FACP 0x00000000731C3000 000114 (v06 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: DSDT 0x000000007314F000 073A1A (v02 ALASKA A M I 01072009 INTL 20200717) [...] ACPI: FACS 0x0000000073285000 000040 [...] ACPI: FIDT 0x000000007314E000 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [...] ACPI: SSDT 0x00000000731C5000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20200717) [...] ACPI: SSDT 0x0000000073148000 005D0B (v02 CpuRef CpuSsdt 00003000 INTL 20200717) [...] ACPI: SSDT 0x0000000073145000 002935 (v02 SaSsdt SaSsdt 00003000 INTL 20200717) [...] ACPI: SSDT 0x0000000073141000 003339 (v02 INTEL IgfxSsdt 00003000 INTL 20200717) [...] ACPI: HPET 0x00000000731C4000 000038 (v01 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: APIC 0x0000000073140000 0001DC (v05 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: MCFG 0x000000007313F000 00003C (v01 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: SSDT 0x000000007313D000 001F1A (v02 ALASKA Ther_Rvp 00001000 INTL 20200717) [...] ACPI: UEFI 0x0000000073218000 000048 (v01 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: NHLT 0x000000007313C000 00002D (v00 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: LPIT 0x000000007313B000 0000CC (v01 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: SSDT 0x0000000073137000 002A83 (v02 ALASKA PtidDevc 00001000 INTL 20200717) [...] ACPI: SSDT 0x0000000073134000 002357 (v02 ALASKA TbtTypeC 00000000 INTL 20200717) [...] ACPI: DBGP 0x0000000073133000 000034 (v01 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: DBG2 0x0000000073132000 000054 (v00 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: SSDT 0x0000000073130000 001918 (v02 ALASKA UsbCTabl 00001000 INTL 20200717) [...] ACPI: DMAR 0x000000007312F000 000088 (v02 INTEL EDK2 00000002 01000013) [...] ACPI: FPDT 0x000000007312E000 000044 (v01 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: SSDT 0x000000007312D000 00073A (v02 INTEL xh_adl_N 00000000 INTL 20200717) [...] ACPI: SSDT 0x0000000073129000 003AEA (v02 SocGpe SocGpe 00003000 INTL 20200717) [...] ACPI: SSDT 0x0000000073125000 0039DA (v02 SocCmn SocCmn 00003000 INTL 20200717) [...] ACPI: SSDT 0x0000000073124000 000144 (v02 Intel ADebTabl 00001000 INTL 20200717) [...] ACPI: BGRT 0x0000000073123000 000038 (v01 ALASKA A M I 01072009 AMI 00010013) [...] ACPI: TPM2 0x0000000073122000 00004C (v04 ALASKA A M I 00000001 AMI 00000000) [...] ACPI: PHAT 0x0000000073121000 0005F1 (v01 ALASKA A M I 00000005 MSFT 0100000D) [...] ACPI: WSMT 0x000000007313A000 000028 (v01 ALASKA A M I 01072009 AMI 00010013) [...] Firmware Error (ACPI): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS01], AE_NOT_FOUND (20221020/dswload2-206) [...] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-264) [...] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010) [...] Firmware Error (ACPI): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS02], AE_NOT_FOUND (20221020/dswload2-206) [...] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-264) [...] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010) [...] ACPI: 13 ACPI AML tables successfully acquired and loaded [...] ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins [...] cpu0 at mainbus0 apid 0 [...] cpu0: Use lfence to serialize rdtsc [...] cpu0: CPU base freq 800000000 Hz [...] cpu0: CPU max freq 3400000000 Hz [...] cpu0: TSC freq CPUID 806400000 Hz [...] cpu0: Intel(R) N100, id 0xb06e0 [...] cpu0: node 0, package 0, core 0, smt 0 [...] cpu1 at mainbus0 apid 2 [...] cpu1: Intel(R) N100, id 0xb06e0 [...] cpu1: node 0, package 0, core 1, smt 0 [...] cpu2 at mainbus0 apid 4 [...] cpu2: Intel(R) N100, id 0xb06e0 [...] cpu2: node 0, package 0, core 2, smt 0 [...] cpu3 at mainbus0 apid 6 [...] cpu3: Intel(R) N100, id 0xb06e0 [...] cpu3: node 0, package 0, core 3, smt 0 [...] acpi0 at mainbus0: Intel ACPICA 20221020 [...] acpi0: X/RSDT: OemId <ALASKA, A M I ,01072009>, AslId <AMI ,01000013> [...] acpi0: MCFG: segment 0, bus 0-255, address 0x00000000c0000000 [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFEF16354A4488 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20200717) [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFEF1633411608 0001A3 (v02 PmRef Cpu0Ist 00003000 INTL 20200717) [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFEF1633411808 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20200717) [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFF92001EF3F000 001BAF (v02 PmRef ApIst 00003000 INTL 20200717) [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFF92001EF42000 001349 (v02 PmRef ApPsd 00003000 INTL 20200717) [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFEF12D85A9008 000FBB (v02 PmRef ApCst 00003000 INTL 20200717) [...] acpi0: SCI interrupting at int 9 [...] acpi0: fixed power button present [...] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 [...] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) [...] timecounter: Timecounter "hpet0" frequency 19200000 Hz quality 2000 [...] acpiec0 at acpi0 (H_EC, PNP0C09-1): not present [...] attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0 [...] acpivga0 at acpi0 (GFX0): ACPI Display Adapter [...] acpiout0 at acpivga0 (DD01, 0x0001): ACPI Display Output Device [...] acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output Device [...] acpiout2 at acpivga0 (DD03, 0x0003): ACPI Display Output Device [...] acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output Device [...] acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device [...] acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device [...] acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device [...] acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device [...] acpiout8 at acpivga0 (DD09, 0x0009): ACPI Display Output Device [...] acpiout9 at acpivga0 (DD0A, 0x000a): ACPI Display Output Device [...] acpiout10 at acpivga0 (DD0B, 0x000b): ACPI Display Output Device [...] acpiout11 at acpivga0 (DD0C, 0x000c): ACPI Display Output Device [...] acpiout12 at acpivga0 (DD0D, 0x000d): ACPI Display Output Device [...] acpiout13 at acpivga0 (DD0E, 0x000e): ACPI Display Output Device [...] acpiout14 at acpivga0 (DD0F, 0x000f): ACPI Display Output Device [...] acpiout15 at acpivga0 (DD1F, 0x001f): ACPI Display Output Device [...] acpiout15: brightness levels: [0-100] [...] acpiout16 at acpivga0 (DD2F, 0x001f): ACPI Display Output Device [...] acpiout16: brightness levels: [0-100] [...] acpivga0: connected output devices: [...] acpivga0: 0x0000: Unknown Output Device, head 0, bios detect [...] acpivga0: 0x0000: Unknown Output Device, head 0, bios detect [...] AWAC (ACPI000E) at acpi0 not configured [...] igpio0 at acpi0 (GPI0, INTC1057): mem 0xfd6e0000-0xfd6effff,0xfd6d0000-0xfd6dffff,0xfd6a0000-0xfd6affff,0xfd690000-0xfd69ffff irq 14 [...] gpio0 at igpio0: 257 pins [...] PTHH (INTC1001) at acpi0 not configured [...] acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button [...] acpiwmi0 at acpi0 (WFDE, PNP0C14-DSarDev): ACPI WMI Interface [...] acpiwmibus at acpiwmi0 not configured [...] acpiwmi1 at acpi0 (WFTE, PNP0C14-TestDev): ACPI WMI Interface [...] acpiwmibus at acpiwmi1 not configured [...] PEPD (INT33A1) at acpi0 not configured [...] HIDD (INTC1070) at acpi0 not configured [...] acpibut1 at acpi0 (PWRB, PNP0C0C): ACPI Power Button [...] TPM (MSFT0101) at acpi0 not configured [...] acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan [...] acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan [...] acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan [...] acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan [...] acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan [...] acpitz0 at acpi0 (TZ00): cpu0 cpu1 cpu2 cpu3 [...] acpitz0: active cooling level 0: 105.0C [...] acpitz0: active cooling level 1: 55.0C [...] acpitz0: active cooling level 2: 50.0C [...] acpitz0: active cooling level 3: 45.0C [...] acpitz0: active cooling level 4: 40.0C [...] acpitz0: levels: critical 110.0 C [...] ACPI: Enabled 4 GPEs in block 00 to 7F [...] pci0 at mainbus0 bus 0: configuration mode 1 [...] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [...] pchb0 at pci0 dev 0 function 0: Intel product 461c (rev. 0x00) [...] genfb0 at pci0 dev 2 function 0: Intel product 46d1 (rev. 0x00) [...] genfb0: framebuffer at 0x4000000000, size 1920x1080, depth 32, stride 7680 [...] genfb0: shadow framebuffer enabled, size 8100 KB [...] wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation) [...] wsmux1: connecting to wsdisplay0 [...] drm at genfb0 not configured [...] Intel product 467e (miscellaneous system) at pci0 dev 8 function 0 not configured [...] Intel Alder Lake Crash Log & Telemetry (miscellaneous DASP, revision 0x01) at pci0 dev 10 function 0 not configured [...] xhci0 at pci0 dev 13 function 0: Intel product 464e (rev. 0x00) [...] xhci0: 64-bit DMA [...] xhci0: interrupting at msi0 vec 0 [...] xhci0: Unknown revision (32). Set to 3.1. [...] xhci0: xHCI version 1.20 [...] usb0 at xhci0: USB revision 3.1 [...] usb1 at xhci0: USB revision 2.0 [...] xhci1 at pci0 dev 20 function 0: Intel product 54ed (rev. 0x00) [...] xhci1: 64-bit DMA [...] xhci1: interrupting at msi1 vec 0 [...] xhci1: xHCI version 1.20 [...] usb2 at xhci1: USB revision 3.1 [...] usb3 at xhci1: USB revision 2.0 [...] Intel product 54ef (RAM memory) at pci0 dev 20 function 2 not configured [...] Intel product 54f0 (miscellaneous network) at pci0 dev 20 function 3 not configured [...] Intel product 54e0 (miscellaneous communications) at pci0 dev 22 function 0 not configured [...] ahcisata0 at pci0 dev 23 function 0: Intel product 54d3 (rev. 0x00) [...] ahcisata0: 64-bit DMA [...] ahcisata0: AHCI revision 1.31, 1 port, 32 slots, CAP 0xe534ff00<PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SALP,SSNTF,SNCQ,S64A> [...] ahcisata0: interrupting at msi2 vec 0 [...] atabus0 at ahcisata0 channel 1 [...] sdhc0 at pci0 dev 26 function 0: Intel product 54c4 (rev. 0x00) [...] sdhc0: interrupting at ioapic0 pin 16 [...] sdhc0: SDHC 3.0, rev 16, caps <546ec881/80000807>, 32-bit ADMA2, 200000 kHz, embedded slot, HS SDR50 DDR50 SDR104 HS200 1.8V, re-tuning mode 1 (128s timer), 2048 byte blocks [...] sdmmc0 at sdhc0 slot 0 [...] ppb0 at pci0 dev 29 function 0: Intel product 54b0 (rev. 0x00) [...] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x2 @ 8.0GT/s [...] pci1 at ppb0 bus 1 [...] pci1: i/o space, memory space enabled, rd/line, wr/inv ok [...] nvme0 at pci1 dev 0 function 0: Micron/Crucial Technology product 540a (rev. 0x01) [...] nvme0: NVMe 1.4 [...] nvme0: for admin queue interrupting at msix3 vec 0 [...] nvme0: CT500P3SSD8, firmware P9CR30A, serial ... [...] nvme0: for io queue 1 interrupting at msix3 vec 1 affinity to cpu0 [...] nvme0: for io queue 2 interrupting at msix3 vec 2 affinity to cpu1 [...] nvme0: for io queue 3 interrupting at msix3 vec 3 affinity to cpu2 [...] nvme0: for io queue 4 interrupting at msix3 vec 4 affinity to cpu3 [...] ld0 at nvme0 nsid 1 [...] ld0: 465 GB, 60801 cyl, 255 head, 63 sec, 512 bytes/sect x 976773168 sectors [...] ppb1 at pci0 dev 29 function 2: Intel product 54b2 (rev. 0x00) [...] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s [...] ppb1: link is x1 @ 5.0GT/s [...] pci2 at ppb1 bus 2 [...] pci2: i/o space, memory space enabled, rd/line, wr/inv ok [...] Intel I225 V Ethernet (ethernet network, revision 0x03) at pci2 dev 0 function 0 not configured [...] pcib0 at pci0 dev 31 function 0: Intel product 5481 (rev. 0x00) [...] hdaudio0 at pci0 dev 31 function 3: HD Audio Controller [...] hdaudio0: interrupting at msi4 vec 0 [...] hdaudio0: HDA ver. 1.0, OSS 9, ISS 7, BSS 0, SDO 1, 64-bit [...] hdaudio0: autoconfiguration error: no codecs found [...] hdaudio0: autoconfiguration error: device driver failed to attach [...] Intel product 54a3 (SMBus serial bus) at pci0 dev 31 function 4 not configured [...] Intel product 54a4 (miscellaneous serial bus) at pci0 dev 31 function 5 not configured [...] isa0 at pcib0 [...] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16-byte FIFO [...] pcppi0 at isa0 port 0x61 [...] spkr0 at pcppi0: PC Speaker [...] wsbell at spkr0 not configured [...] midi0 at pcppi0: PC speaker [...] sysbeep0 at pcppi0 [...] attimer1: attached to pcppi0 [...] acpicpu0 at cpu0: ACPI CPU [...] acpicpu0: C1: FFH, lat 1 us, pow 1000 mW [...] acpicpu0: C2: FFH, lat 127 us, pow 350 mW [...] acpicpu0: C3: FFH, lat 1048 us, pow 200 mW [...] acpicpu0: P0: FFH, lat 10 us, pow 6000 mW, 801 MHz, turbo boost [...] acpicpu0: P1: FFH, lat 10 us, pow 6000 mW, 800 MHz [...] acpicpu0: P2: FFH, lat 10 us, pow 5160 mW, 700 MHz [...] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105 [...] acpicpu1 at cpu1: ACPI CPU [...] coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=105 [...] acpicpu2 at cpu2: ACPI CPU [...] coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=105 [...] acpicpu3 at cpu3: ACPI CPU [...] coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=105 [...] cpu0: CPU base freq 800000000 Hz [...] cpu0: CPU max freq 3400000000 Hz [...] cpu0: TSC freq CPUID 806400000 Hz [...] cpu0: TSC freq calibrated 806401000 Hz [...] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [...] timecounter: Timecounter "TSC" frequency 806401000 Hz quality 3000 [...] uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0 [...] uhub1: 1 port with 1 removable, self powered [...] uhub2 at usb2: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0 [...] uhub2: 4 ports with 4 removable, self powered [...] uhub3 at usb3: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0 [...] uhub3: 12 ports with 12 removable, self powered [...] ld0: GPT GUID: HASH_3E8-4ABE-94B3-98E8-76F55A031680 [...] dk0 at ld0: "HASH_1FA-E749-4A24-B569-3B7CC717FFCF", 262144 blocks at 2048, type: msdos [...] dk1 at ld0: "HASH_29C-E39E-D024-A4B6-88B9D4C1B665", 943519744 blocks at 264192, type: ffs [...] dk2 at ld0: "HASH_59A-95AB-4943-C327-A49BA52A1FD6", 32989184 blocks at 943783936, type: swap [...] IPsec: Initialized Security Association Processing. [...] sdmmc0: autoconfiguration error: couldn't enable card: 60 [...] uhidev0 at uhub3 port 2 configuration 1 interface 0 [...] uhidev0: KYE SYSTEMS CORP. (0x0458) Wired Mouse (0x0186), rev 1.10/24.58, addr 1, iclass 3/1 [...] ums0 at uhidev0: 3 buttons and Z dir [...] wsmouse0 at ums0 mux 0 [...] uhidev1 at uhub3 port 2 configuration 1 interface 1 [...] uhidev1: KYE SYSTEMS CORP. (0x0458) Wired Mouse (0x0186), rev 1.10/24.58, addr 1, iclass 3/0 [...] uhidev1: autoconfiguration error: no input interrupt endpoint [...] uhidev2 at uhub3 port 3 configuration 1 interface 0 [...] uhidev2: SONiX (0x0c45) USB Keyboard (0x7663), rev 2.00/0.01, addr 2, iclass 3/1 [...] ukbd0 at uhidev2 [...] wskbd0 at ukbd0: console keyboard, using wsdisplay0 [...] uhidev3 at uhub3 port 3 configuration 1 interface 1 [...] uhidev3: SONiX (0x0c45) USB Keyboard (0x7663), rev 2.00/0.01, addr 2, iclass 3/0 [...] uhidev3: 2 report ids [...] uhid0 at uhidev3 reportid 1: input=2, output=0, feature=0 [...] uhid1 at uhidev3 reportid 2: input=1, output=0, feature=0 [...] ahcisata0 port 1: PHY offline [...] ure0 at uhub3 port 4 [...] ure0: Realtek (0x0bda) USB 10/100 LAN (0x8152), rev 2.10/20.00, addr 3 [...] ure0: RTL8152 ver 4c10 [...] rlphy0 at ure0 phy 0: RTL8201E 10/100 media interface, rev. 2 [...] rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] ure0: Ethernet address XXX [...] uaudio0 at uhub3 port 6 configuration 1 interface 0 [...] uaudio0: CSCTEK (0x0573) USB Audio and HID (0x1573), rev 2.00/80.07, addr 4 [...] uaudio0: audio rev 1.00 [...] audio0 at uaudio0: playback, capture, full duplex, independent [...] audio0: slinear_le:16 2ch 48000Hz, blk 11520 bytes (60ms) for playback [...] audio0: slinear_le:16 1ch 48000Hz, blk 6000 bytes (62.5ms) for recording [...] spkr1 at audio0: PC Speaker (synthesized) [...] wsbell at spkr1 not configured [...] uhidev4 at uhub3 port 6 configuration 1 interface 3 [...] uhidev4: CSCTEK (0x0573) USB Audio and HID (0x1573), rev 2.00/80.07, addr 4, iclass 3/0 [...] uhidev4: autoconfiguration error: no input interrupt endpoint [...] ubt0 at uhub3 port 10 [...] ubt0: vendor 8087 (0x8087) product 0026 (0x0026), rev 2.01/0.02, addr 5 [...] swwdog0: software watchdog initialized [...] WARNING: 5 errors while detecting hardware; check system log. [...] boot device: ld0 [...] root on dk1 dumps on dk2 [...] root file system type: ffs [...] kern.module.path=/stand/amd64/10.0/modules [...] wsdisplay0: screen 1 added (default, vt100 emulation) [...] wsdisplay0: screen 2 added (default, vt100 emulation) [...] wsdisplay0: screen 3 added (default, vt100 emulation) [...] wsdisplay0: screen 4 added (default, vt100 emulation) [...] uaudio0: pintr error: IOERROR [...] uaudio0: uaudio_chan_pintr: count(0) != size(1920), status(13) [...] panic: kernel diagnostic assertion "xfer == SIMPLEQ_FIRST(&pipe->up_queue)" failed: file "/usr/src/sys/dev/usb/usbdi.c", line 1142 xfer 0xffffef12da2f8cc0 is not start of queue (0xffffef12da2f8b80 is at start) [...] cpu0: Begin traceback... [...] vpanic() at netbsd:vpanic+0x183 [...] kern_assert() at netbsd:kern_assert+0x4b [...] usb_transfer_complete() at netbsd:usb_transfer_complete+0x44d [...] xhci_softintr() at netbsd:xhci_softintr+0x4ea [...] usb_soft_intr() at netbsd:usb_soft_intr+0x25 [...] softint_dispatch() at netbsd:softint_dispatch+0x10b [...] DDB lost frame for netbsd:Xsoftintr+0x4c, trying 0xffff92042dc890f0 [...] Xsoftintr() at netbsd:Xsoftintr+0x4c [...] --- interrupt --- [...] 0: [...] cpu0: End traceback... [...] [...] dumping to dev 168,2 (offset=831, size=4123544): [...] dump WARNING: negative runtime; monotonic clock has gone backwards [...] 1.0000000] [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [...] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [...] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 [...] The NetBSD Foundation, Inc. All rights reserved. [...] Copyright (c) 1982, 1986, 1989, 1991, 1993 [...] The Regents of the University of California. All rights reserved. [...] [...] NetBSD 10.0_BETA (GENERIC) #0: Thu Apr 20 14:20:02 UTC 2023 [...] XXX@XXX:/usr/src/sys/arch/amd64/compile/GENERIC [...] total memory = 16107 MB [...] avail memory = 15551 MB [...] timecounter: Timecounters tick every 10.000 msec [...] Kernelized RAIDframe activated [...] i915drmkms* disabled [...] RTC BIOS diagnostic error 0x3f<config_unit,memory_size,fixed_disk,invalid_time> [...] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 [...] efi: systbl at pa 73e65018 [...] mainbus0 (root) [...] ACPI: RSDP 0x0000000073262014 000024 (v02 ALASKA) [...] ACPI: XSDT 0x0000000073261728 000104 (v01 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: FACP 0x00000000731C3000 000114 (v06 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: DSDT 0x000000007314F000 073A1A (v02 ALASKA A M I 01072009 INTL 20200717) [...] ACPI: FACS 0x0000000073285000 000040 [...] ACPI: FIDT 0x000000007314E000 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [...] ACPI: SSDT 0x00000000731C5000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20200717) [...] ACPI: SSDT 0x0000000073148000 005D0B (v02 CpuRef CpuSsdt 00003000 INTL 20200717) [...] ACPI: SSDT 0x0000000073145000 002935 (v02 SaSsdt SaSsdt 00003000 INTL 20200717) [...] ACPI: SSDT 0x0000000073141000 003339 (v02 INTEL IgfxSsdt 00003000 INTL 20200717) [...] ACPI: HPET 0x00000000731C4000 000038 (v01 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: APIC 0x0000000073140000 0001DC (v05 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: MCFG 0x000000007313F000 00003C (v01 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: SSDT 0x000000007313D000 001F1A (v02 ALASKA Ther_Rvp 00001000 INTL 20200717) [...] ACPI: UEFI 0x0000000073218000 000048 (v01 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: NHLT 0x000000007313C000 00002D (v00 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: LPIT 0x000000007313B000 0000CC (v01 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: SSDT 0x0000000073137000 002A83 (v02 ALASKA PtidDevc 00001000 INTL 20200717) [...] ACPI: SSDT 0x0000000073134000 002357 (v02 ALASKA TbtTypeC 00000000 INTL 20200717) [...] ACPI: DBGP 0x0000000073133000 000034 (v01 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: DBG2 0x0000000073132000 000054 (v00 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: SSDT 0x0000000073130000 001918 (v02 ALASKA UsbCTabl 00001000 INTL 20200717) [...] ACPI: DMAR 0x000000007312F000 000088 (v02 INTEL EDK2 00000002 01000013) [...] ACPI: FPDT 0x000000007312E000 000044 (v01 ALASKA A M I 01072009 AMI 01000013) [...] ACPI: SSDT 0x000000007312D000 00073A (v02 INTEL xh_adl_N 00000000 INTL 20200717) [...] ACPI: SSDT 0x0000000073129000 003AEA (v02 SocGpe SocGpe 00003000 INTL 20200717) [...] ACPI: SSDT 0x0000000073125000 0039DA (v02 SocCmn SocCmn 00003000 INTL 20200717) [...] ACPI: SSDT 0x0000000073124000 000144 (v02 Intel ADebTabl 00001000 INTL 20200717) [...] ACPI: BGRT 0x0000000073123000 000038 (v01 ALASKA A M I 01072009 AMI 00010013) [...] ACPI: TPM2 0x0000000073122000 00004C (v04 ALASKA A M I 00000001 AMI 00000000) [...] ACPI: PHAT 0x0000000073121000 0005F1 (v01 ALASKA A M I 00000005 MSFT 0100000D) [...] ACPI: WSMT 0x000000007313A000 000028 (v01 ALASKA A M I 01072009 AMI 00010013) [...] Firmware Error (ACPI): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS01], AE_NOT_FOUND (20221020/dswload2-206) [...] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-264) [...] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010) [...] Firmware Error (ACPI): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS02], AE_NOT_FOUND (20221020/dswload2-206) [...] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-264) [...] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010) [...] ACPI: 13 ACPI AML tables successfully acquired and loaded [...] ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins [...] cpu0 at mainbus0 apid 0 [...] cpu0: Use lfence to serialize rdtsc [...] cpu0: CPU base freq 800000000 Hz [...] cpu0: CPU max freq 3400000000 Hz [...] cpu0: TSC freq CPUID 806400000 Hz [...] cpu0: Intel(R) N100, id 0xb06e0 [...] cpu0: node 0, package 0, core 0, smt 0 [...] cpu1 at mainbus0 apid 2 [...] cpu1: Intel(R) N100, id 0xb06e0 [...] cpu1: node 0, package 0, core 1, smt 0 [...] cpu2 at mainbus0 apid 4 [...] cpu2: Intel(R) N100, id 0xb06e0 [...] cpu2: node 0, package 0, core 2, smt 0 [...] cpu3 at mainbus0 apid 6 [...] cpu3: Intel(R) N100, id 0xb06e0 [...] cpu3: node 0, package 0, core 3, smt 0 [...] acpi0 at mainbus0: Intel ACPICA 20221020 [...] acpi0: X/RSDT: OemId <ALASKA, A M I ,01072009>, AslId <AMI ,01000013> [...] acpi0: MCFG: segment 0, bus 0-255, address 0x00000000c0000000 [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFF8B8EEA6A4488 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20200717) [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFF8B8EE8611608 0001A3 (v02 PmRef Cpu0Ist 00003000 INTL 20200717) [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFF8B8EE8611808 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20200717) [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFAD801EF3F000 001BAF (v02 PmRef ApIst 00003000 INTL 20200717) [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFAD801EF42000 001349 (v02 PmRef ApPsd 00003000 INTL 20200717) [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFF8B8B8D7A9008 000FBB (v02 PmRef ApCst 00003000 INTL 20200717) [...] acpi0: SCI interrupting at int 9 [...] acpi0: fixed power button present [...] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 [...] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) [...] timecounter: Timecounter "hpet0" frequency 19200000 Hz quality 2000 [...] acpiec0 at acpi0 (H_EC, PNP0C09-1): not present [...] attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0 [...] acpivga0 at acpi0 (GFX0): ACPI Display Adapter [...] acpiout0 at acpivga0 (DD01, 0x0001): ACPI Display Output Device [...] acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output Device [...] acpiout2 at acpivga0 (DD03, 0x0003): ACPI Display Output Device [...] acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output Device [...] acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device [...] acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device [...] acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device [...] acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device [...] acpiout8 at acpivga0 (DD09, 0x0009): ACPI Display Output Device [...] acpiout9 at acpivga0 (DD0A, 0x000a): ACPI Display Output Device [...] acpiout10 at acpivga0 (DD0B, 0x000b): ACPI Display Output Device [...] acpiout11 at acpivga0 (DD0C, 0x000c): ACPI Display Output Device [...] acpiout12 at acpivga0 (DD0D, 0x000d): ACPI Display Output Device [...] acpiout13 at acpivga0 (DD0E, 0x000e): ACPI Display Output Device [...] acpiout14 at acpivga0 (DD0F, 0x000f): ACPI Display Output Device [...] acpiout15 at acpivga0 (DD1F, 0x001f): ACPI Display Output Device [...] acpiout15: brightness levels: [0-100] [...] acpiout16 at acpivga0 (DD2F, 0x001f): ACPI Display Output Device [...] acpiout16: brightness levels: [0-100] [...] acpivga0: connected output devices: [...] acpivga0: 0x0000: Unknown Output Device, head 0, bios detect [...] acpivga0: 0x0000: Unknown Output Device, head 0, bios detect [...] AWAC (ACPI000E) at acpi0 not configured [...] igpio0 at acpi0 (GPI0, INTC1057): mem 0xfd6e0000-0xfd6effff,0xfd6d0000-0xfd6dffff,0xfd6a0000-0xfd6affff,0xfd690000-0xfd69ffff irq 14 [...] gpio0 at igpio0: 257 pins [...] PTHH (INTC1001) at acpi0 not configured [...] acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button [...] acpiwmi0 at acpi0 (WFDE, PNP0C14-DSarDev): ACPI WMI Interface [...] acpiwmibus at acpiwmi0 not configured [...] acpiwmi1 at acpi0 (WFTE, PNP0C14-TestDev): ACPI WMI Interface [...] acpiwmibus at acpiwmi1 not configured [...] PEPD (INT33A1) at acpi0 not configured [...] HIDD (INTC1070) at acpi0 not configured [...] acpibut1 at acpi0 (PWRB, PNP0C0C): ACPI Power Button [...] TPM (MSFT0101) at acpi0 not configured [...] acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan [...] acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan [...] acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan [...] acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan [...] acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan [...] acpitz0 at acpi0 (TZ00): cpu0 cpu1 cpu2 cpu3 [...] acpitz0: active cooling level 0: 105.0C [...] acpitz0: active cooling level 1: 55.0C [...] acpitz0: active cooling level 2: 50.0C [...] acpitz0: active cooling level 3: 45.0C [...] acpitz0: active cooling level 4: 40.0C [...] acpitz0: levels: critical 110.0 C [...] ACPI: Enabled 4 GPEs in block 00 to 7F [...] pci0 at mainbus0 bus 0: configuration mode 1 [...] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [...] pchb0 at pci0 dev 0 function 0: Intel product 461c (rev. 0x00) [...] genfb0 at pci0 dev 2 function 0: Intel product 46d1 (rev. 0x00) [...] genfb0: framebuffer at 0x4000000000, size 1920x1080, depth 32, stride 7680 [...] genfb0: shadow framebuffer enabled, size 8100 KB [...] wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation) [...] wsmux1: connecting to wsdisplay0 [...] drm at genfb0 not configured [...] Intel product 467e (miscellaneous system) at pci0 dev 8 function 0 not configured [...] Intel Alder Lake Crash Log & Telemetry (miscellaneous DASP, revision 0x01) at pci0 dev 10 function 0 not configured [...] xhci0 at pci0 dev 13 function 0: Intel product 464e (rev. 0x00) [...] xhci0: 64-bit DMA [...] xhci0: interrupting at msi0 vec 0 [...] xhci0: Unknown revision (32). Set to 3.1. [...] xhci0: xHCI version 1.20 [...] usb0 at xhci0: USB revision 3.1 [...] usb1 at xhci0: USB revision 2.0 [...] xhci1 at pci0 dev 20 function 0: Intel product 54ed (rev. 0x00) [...] xhci1: 64-bit DMA [...] xhci1: interrupting at msi1 vec 0 [...] xhci1: xHCI version 1.20 [...] usb2 at xhci1: USB revision 3.1 [...] usb3 at xhci1: USB revision 2.0 [...] Intel product 54ef (RAM memory) at pci0 dev 20 function 2 not configured [...] Intel product 54f0 (miscellaneous network) at pci0 dev 20 function 3 not configured [...] Intel product 54e0 (miscellaneous communications) at pci0 dev 22 function 0 not configured [...] ahcisata0 at pci0 dev 23 function 0: Intel product 54d3 (rev. 0x00) [...] ahcisata0: 64-bit DMA [...] ahcisata0: AHCI revision 1.31, 1 port, 32 slots, CAP 0xe534ff00<PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SALP,SSNTF,SNCQ,S64A> [...] ahcisata0: interrupting at msi2 vec 0 [...] atabus0 at ahcisata0 channel 1 [...] sdhc0 at pci0 dev 26 function 0: Intel product 54c4 (rev. 0x00) [...] sdhc0: interrupting at ioapic0 pin 16 [...] sdhc0: SDHC 3.0, rev 16, caps <546ec881/80000807>, 32-bit ADMA2, 200000 kHz, embedded slot, HS SDR50 DDR50 SDR104 HS200 1.8V, re-tuning mode 1 (128s timer), 2048 byte blocks [...] sdmmc0 at sdhc0 slot 0 [...] ppb0 at pci0 dev 29 function 0: Intel product 54b0 (rev. 0x00) [...] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x2 @ 8.0GT/s [...] pci1 at ppb0 bus 1 [...] pci1: i/o space, memory space enabled, rd/line, wr/inv ok [...] nvme0 at pci1 dev 0 function 0: Micron/Crucial Technology product 540a (rev. 0x01) [...] nvme0: NVMe 1.4 [...] nvme0: for admin queue interrupting at msix3 vec 0 [...] nvme0: CT500P3SSD8, firmware P9CR30A, serial ... [...] nvme0: for io queue 1 interrupting at msix3 vec 1 affinity to cpu0 [...] nvme0: for io queue 2 interrupting at msix3 vec 2 affinity to cpu1 [...] nvme0: for io queue 3 interrupting at msix3 vec 3 affinity to cpu2 [...] nvme0: for io queue 4 interrupting at msix3 vec 4 affinity to cpu3 [...] ld0 at nvme0 nsid 1 [...] ld0: 465 GB, 60801 cyl, 255 head, 63 sec, 512 bytes/sect x 976773168 sectors [...] ppb1 at pci0 dev 29 function 2: Intel product 54b2 (rev. 0x00) [...] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s [...] ppb1: link is x1 @ 5.0GT/s [...] pci2 at ppb1 bus 2 [...] pci2: i/o space, memory space enabled, rd/line, wr/inv ok [...] Intel I225 V Ethernet (ethernet network, revision 0x03) at pci2 dev 0 function 0 not configured [...] pcib0 at pci0 dev 31 function 0: Intel product 5481 (rev. 0x00) [...] hdaudio0 at pci0 dev 31 function 3: HD Audio Controller [...] hdaudio0: interrupting at msi4 vec 0 [...] hdaudio0: HDA ver. 1.0, OSS 9, ISS 7, BSS 0, SDO 1, 64-bit [...] hdaudio0: autoconfiguration error: no codecs found [...] hdaudio0: autoconfiguration error: device driver failed to attach [...] Intel product 54a3 (SMBus serial bus) at pci0 dev 31 function 4 not configured [...] Intel product 54a4 (miscellaneous serial bus) at pci0 dev 31 function 5 not configured [...] isa0 at pcib0 [...] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16-byte FIFO [...] pcppi0 at isa0 port 0x61 [...] spkr0 at pcppi0: PC Speaker [...] wsbell at spkr0 not configured [...] midi0 at pcppi0: PC speaker [...] sysbeep0 at pcppi0 [...] attimer1: attached to pcppi0 [...] acpicpu0 at cpu0: ACPI CPU [...] acpicpu0: C1: FFH, lat 1 us, pow 1000 mW [...] acpicpu0: C2: FFH, lat 127 us, pow 350 mW [...] acpicpu0: C3: FFH, lat 1048 us, pow 200 mW [...] acpicpu0: P0: FFH, lat 10 us, pow 6000 mW, 801 MHz, turbo boost [...] acpicpu0: P1: FFH, lat 10 us, pow 6000 mW, 800 MHz [...] acpicpu0: P2: FFH, lat 10 us, pow 5160 mW, 700 MHz [...] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105 [...] acpicpu1 at cpu1: ACPI CPU [...] coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=105 [...] acpicpu2 at cpu2: ACPI CPU [...] coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=105 [...] acpicpu3 at cpu3: ACPI CPU [...] coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=105 [...] cpu0: CPU base freq 800000000 Hz [...] cpu0: CPU max freq 3400000000 Hz [...] cpu0: TSC freq CPUID 806400000 Hz [...] cpu0: TSC freq calibrated 806401000 Hz [...] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [...] timecounter: Timecounter "TSC" frequency 806401000 Hz quality 3000 [...] uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0 [...] uhub1: 1 port with 1 removable, self powered [...] uhub2 at usb2: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0 [...] uhub2: 4 ports with 4 removable, self powered [...] uhub3 at usb3: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0 [...] uhub3: 12 ports with 12 removable, self powered [...] ld0: GPT GUID: HASH_3E8-4ABE-94B3-98E8-76F55A031680 [...] dk0 at ld0: "HASH_1FA-E749-4A24-B569-3B7CC717FFCF", 262144 blocks at 2048, type: msdos [...] dk1 at ld0: "HASH_29C-E39E-D024-A4B6-88B9D4C1B665", 943519744 blocks at 264192, type: ffs [...] dk2 at ld0: "HASH_59A-95AB-4943-C327-A49BA52A1FD6", 32989184 blocks at 943783936, type: swap [...] IPsec: Initialized Security Association Processing. [...] sdmmc0: autoconfiguration error: couldn't enable card: 60 [...] uhidev0 at uhub3 port 2 configuration 1 interface 0 [...] uhidev0: KYE SYSTEMS CORP. (0x0458) Wired Mouse (0x0186), rev 1.10/24.58, addr 1, iclass 3/1 [...] ums0 at uhidev0: 3 buttons and Z dir [...] wsmouse0 at ums0 mux 0 [...] uhidev1 at uhub3 port 2 configuration 1 interface 1 [...] uhidev1: KYE SYSTEMS CORP. (0x0458) Wired Mouse (0x0186), rev 1.10/24.58, addr 1, iclass 3/0 [...] uhidev1: autoconfiguration error: no input interrupt endpoint [...] uhidev2 at uhub3 port 3 configuration 1 interface 0 [...] uhidev2: SONiX (0x0c45) USB Keyboard (0x7663), rev 2.00/0.01, addr 2, iclass 3/1 [...] ukbd0 at uhidev2 [...] wskbd0 at ukbd0: console keyboard, using wsdisplay0 [...] uhidev3 at uhub3 port 3 configuration 1 interface 1 [...] uhidev3: SONiX (0x0c45) USB Keyboard (0x7663), rev 2.00/0.01, addr 2, iclass 3/0 [...] uhidev3: 2 report ids [...] uhid0 at uhidev3 reportid 1: input=2, output=0, feature=0 [...] uhid1 at uhidev3 reportid 2: input=1, output=0, feature=0 [...] ahcisata0 port 1: PHY offline [...] ure0 at uhub3 port 4 [...] ure0: Realtek (0x0bda) USB 10/100 LAN (0x8152), rev 2.10/20.00, addr 3 [...] ure0: RTL8152 ver 4c10 [...] rlphy0 at ure0 phy 0: RTL8201E 10/100 media interface, rev. 2 [...] rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] ure0: Ethernet address XXX [...] uaudio0 at uhub3 port 6 configuration 1 interface 0 [...] uaudio0: CSCTEK (0x0573) USB Audio and HID (0x1573), rev 2.00/80.07, addr 4 [...] uaudio0: audio rev 1.00 [...] audio0 at uaudio0: playback, capture, full duplex, independent [...] audio0: slinear_le:16 2ch 48000Hz, blk 11520 bytes (60ms) for playback [...] audio0: slinear_le:16 1ch 48000Hz, blk 6000 bytes (62.5ms) for recording [...] spkr1 at audio0: PC Speaker (synthesized) [...] wsbell at spkr1 not configured [...] uhidev4 at uhub3 port 6 configuration 1 interface 3 [...] uhidev4: CSCTEK (0x0573) USB Audio and HID (0x1573), rev 2.00/80.07, addr 4, iclass 3/0 [...] uhidev4: autoconfiguration error: no input interrupt endpoint [...] ubt0 at uhub3 port 10 [...] ubt0: vendor 8087 (0x8087) product 0026 (0x0026), rev 2.01/0.02, addr 5 [...] swwdog0: software watchdog initialized [...] WARNING: 5 errors while detecting hardware; check system log. [...] boot device: ld0 [...] root on dk1 dumps on dk2 [...] root file system type: ffs [...] kern.module.path=/stand/amd64/10.0/modules [...] wsdisplay0: screen 1 added (default, vt100 emulation) [...] wsdisplay0: screen 2 added (default, vt100 emulation) [...] wsdisplay0: screen 3 added (default, vt100 emulation) [...] wsdisplay0: screen 4 added (default, vt100 emulation)