[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE stable/25.1-n269614-36155813721 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i5-4590S CPU @ 3.00GHz (2993.23-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16553959424 (15787 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 3 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf04d0-0xf04ee [...] smbios0: Version: 2.8, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) I350 (Fiber)> mem 0xdfd60000-0xdfd7ffff,0xdfd8c000-0xdfd8ffff irq 17 at device 0.0 on pci2 [...] igb0: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I350 (Fiber)> mem 0xdfd40000-0xdfd5ffff,0xdfd88000-0xdfd8bfff irq 18 at device 0.1 on pci2 [...] igb1: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I350 (Fiber)> mem 0xdfd20000-0xdfd3ffff,0xdfd84000-0xdfd87fff irq 19 at device 0.2 on pci2 [...] igb2: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I350 (Fiber)> mem 0xdfd00000-0xdfd1ffff,0xdfd80000-0xdfd83fff irq 16 at device 0.3 on pci2 [...] igb3: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xdfe03000-0xdfe033ff irq 16 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb4: <Intel(R) I211 (Copper)> mem 0xdfc00000-0xdfc1ffff,0xdfc20000-0xdfc23fff irq 16 at device 0.0 on pci3 [...] igb4: NVM V0.6 imgtype2 [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 2 RX queues 2 TX queues [...] igb4: Using MSI-X interrupts with 3 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb5: <Intel(R) I211 (Copper)> mem 0xdfb00000-0xdfb1ffff,0xdfb20000-0xdfb23fff irq 17 at device 0.0 on pci4 [...] igb5: NVM V0.6 imgtype2 [...] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] igb5: Using 2 RX queues 2 TX queues [...] igb5: Using MSI-X interrupts with 3 vectors [...] igb5: Ethernet address: ... [...] igb5: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igb6: <Intel(R) I211 (Copper)> mem 0xdfa00000-0xdfa1ffff,0xdfa20000-0xdfa23fff irq 18 at device 0.0 on pci5 [...] igb6: NVM V0.6 imgtype2 [...] igb6: Using 1024 TX descriptors and 1024 RX descriptors [...] igb6: Using 2 RX queues 2 TX queues [...] igb6: Using MSI-X interrupts with 3 vectors [...] igb6: Ethernet address: ... [...] igb6: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] igb7: <Intel(R) I211 (Copper)> mem 0xdf900000-0xdf91ffff,0xdf920000-0xdf923fff irq 19 at device 0.0 on pci6 [...] igb7: NVM V0.6 imgtype2 [...] igb7: Using 1024 TX descriptors and 1024 RX descriptors [...] igb7: Using 2 RX queues 2 TX queues [...] igb7: Using MSI-X interrupts with 3 vectors [...] igb7: Ethernet address: ... [...] igb7: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] igb8: <Intel(R) I211 (Copper)> mem 0xdf800000-0xdf81ffff,0xdf820000-0xdf823fff irq 16 at device 0.0 on pci7 [...] igb8: NVM V0.6 imgtype2 [...] igb8: Using 1024 TX descriptors and 1024 RX descriptors [...] igb8: Using 2 RX queues 2 TX queues [...] igb8: Using MSI-X interrupts with 3 vectors [...] igb8: Ethernet address: ... [...] igb8: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib8: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] igb9: <Intel(R) I211 (Copper)> mem 0xdf700000-0xdf71ffff,0xdf720000-0xdf723fff irq 17 at device 0.0 on pci8 [...] igb9: NVM V0.6 imgtype2 [...] igb9: Using 1024 TX descriptors and 1024 RX descriptors [...] igb9: Using 2 RX queues 2 TX queues [...] igb9: Using MSI-X interrupts with 3 vectors [...] igb9: Ethernet address: ... [...] igb9: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib9: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] igb10: <Intel(R) I211 (Copper)> mem 0xdf600000-0xdf61ffff,0xdf620000-0xdf623fff irq 18 at device 0.0 on pci9 [...] igb10: NVM V0.6 imgtype2 [...] igb10: Using 1024 TX descriptors and 1024 RX descriptors [...] igb10: Using 2 RX queues 2 TX queues [...] igb10: Using MSI-X interrupts with 3 vectors [...] igb10: Ethernet address: ... [...] igb10: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib10: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] pcib11: <ACPI PCI-PCI bridge> mem 0xdf500000-0xdf51ffff irq 19 at device 0.0 on pci10 [...] pci11: <ACPI PCI bus> on pcib11 [...] pcib12: <PCI-PCI bridge> irq 16 at device 1.0 on pci11 [...] pci12: <PCI bus> on pcib12 [...] igb11: <Intel(R) I211 (Copper)> mem 0xdf400000-0xdf41ffff,0xdf420000-0xdf423fff irq 16 at device 0.0 on pci12 [...] igb11: NVM V0.6 imgtype2 [...] igb11: Using 1024 TX descriptors and 1024 RX descriptors [...] igb11: Using 2 RX queues 2 TX queues [...] igb11: Using MSI-X interrupts with 3 vectors [...] igb11: Ethernet address: ... [...] igb11: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib13: <PCI-PCI bridge> irq 19 at device 4.0 on pci11 [...] pci13: <PCI bus> on pcib13 [...] igb12: <Intel(R) I211 (Copper)> mem 0xdf300000-0xdf31ffff,0xdf320000-0xdf323fff irq 19 at device 0.0 on pci13 [...] igb12: NVM V0.6 imgtype2 [...] igb12: Using 1024 TX descriptors and 1024 RX descriptors [...] igb12: Using 2 RX queues 2 TX queues [...] igb12: Using MSI-X interrupts with 3 vectors [...] igb12: Ethernet address: ... [...] igb12: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib14: <PCI-PCI bridge> irq 16 at device 5.0 on pci11 [...] pci14: <PCI bus> on pcib14 [...] igb13: <Intel(R) I211 (Copper)> mem 0xdf200000-0xdf21ffff,0xdf220000-0xdf223fff irq 16 at device 0.0 on pci14 [...] igb13: NVM V0.6 imgtype2 [...] igb13: Using 1024 TX descriptors and 1024 RX descriptors [...] igb13: Using 2 RX queues 2 TX queues [...] igb13: Using MSI-X interrupts with 3 vectors [...] igb13: Ethernet address: ... [...] igb13: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib15: <PCI-PCI bridge> irq 17 at device 6.0 on pci11 [...] pci15: <PCI bus> on pcib15 [...] pcib16: <PCI-PCI bridge> irq 17 at device 0.0 on pci15 [...] pci16: <PCI bus> on pcib16 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xde000000-0xdeffffff,0xdf020000-0xdf03ffff irq 17 at device 0.0 on pci16 [...] vgapci0: Boot video device [...] pcib17: <PCI-PCI bridge> irq 18 at device 7.0 on pci11 [...] pci17: <PCI bus> on pcib17 [...] pcib18: <PCI-PCI bridge> irq 19 at device 8.0 on pci11 [...] pci18: <PCI bus> on pcib18 [...] pcib19: <PCI-PCI bridge> irq 16 at device 9.0 on pci11 [...] pci19: <PCI bus> on pcib19 [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xdfe02000-0xdfe023ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xdfe01000-0xdfe017ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca400001e00 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca400001e00 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca400001e00 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca400001e00 [...] device_attach: est3 attach returned 6 [...] Timecounter "TSC-low" frequency 1496534348 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] Trying to mount root from ufs:/dev/ufs/OPNsense_Install [ro,noatime]... [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] Root mount waiting for: usbus0 usbus1 CAM [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] ugen0.2: <vendor 0x8087 product 0x8008> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] Root mount waiting for:uhub2: 6 ports with 6 removable, self powered [...] usbus0 usbus1 CAM [...] uhub3: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus1 CAM [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device SanDisk Cruzer Blade (0x0781:0x5567) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device SanDisk Cruzer Blade (0x0781:0x5567) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device SanDisk Cruzer Blade (0x0781:0x5567) [...] ugen1.3: <SanDisk Cruzer Blade> at usbus1 [...] umass0 on uhub3 [...] umass0: <SanDisk Cruzer Blade, class 0/0, rev 2.00/1.00, addr 3> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:2:0: Attached to scbus2 [...] ugen1.4: <American Megatrends Inc. Virtual Hub> at usbus1 [...] uhub4 on uhub3 [...] uhub4: <American Megatrends Inc. Virtual Hub, class 9/0, rev 2.00/1.00, addr 4> on usbus1 [...] Root mount waiting for: usbus1 CAM [...] uhub4: 5 ports with 5 removable, self powered [...] Root mount waiting for: usbus1 CAM [...] ugen1.5: <American Megatrends Inc. Virtual Keyboard and Mouse> at usbus1 [...] ukbd0 on uhub4 [...] ukbd0: <American Megatrends Inc. Virtual Keyboard and Mouse, class 0/0, rev 1.10/1.00, addr 5> on usbus1 [...] kbd1 at ukbd0 [...] Root mount waiting for: usbus1 CAM [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device American Megatrends Inc. Virtual Cdrom Device (0x046b:0xff20) [...] ugen1.6: <American Megatrends Inc. Virtual Cdrom Device> at usbus1 [...] umass1 on uhub4 [...] umass1: <American Megatrends Inc. Virtual Cdrom Device, class 0/0, rev 2.00/1.00, addr 6> on usbus1 [...] umass1: SCSI over Bulk-Only; quirks = 0x0100 [...] umass1:3:1: Attached to scbus3 [...] Root mount waiting for: usbus1 CAM [...] Root mount waiting for: usbus1 CAM [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device American Megatrends Inc. Virtual Floppy Device (0x046b:0xff40) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device American Megatrends Inc. Virtual Floppy Device (0x046b:0xff40) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device American Megatrends Inc. Virtual Floppy Device (0x046b:0xff40) [...] ugen1.7: <American Megatrends Inc. Virtual Floppy Device> at usbus1 [...] umass2 on uhub4 [...] umass2: <American Megatrends Inc. Virtual Floppy Device, class 0/0, rev 2.00/1.00, addr 7> on usbus1 [...] umass2: SCSI over Bulk-Only; quirks = 0x0105 [...] umass2:4:2: Attached to scbus4 [...] Root mount waiting for: usbus1 CAM [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device American Megatrends Inc. Virtual HardDisk Device (0x04ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Micron MTFDDAK256TDL M1LN001> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] 6b:0xff31) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device American Megatrends Inc. Virtual HardDisk Devicecd0 at umass-sim1 bus 1 scbus3 target 0 lun 0 [...] cd0: <AMI Virtual CDROM0 1.00> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 40.000MB/s transfers [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] (0x046b:0xff31) [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] da0: <SanDisk Cruzer Blade 1.00> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 14664MB (30031872 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] da1 at umass-sim2 bus 2 scbus4 target 0 lun 0 [...] da1: <AMI Virtual Floppy0 1.00> Removable Direct Access SCSI device [...] da1: Serial Number... [...] da1: 40.000MB/s transfers [...] da1: Attempt to query device size failed: NOT READY, Medium not present [...] da1: quirks=0x2<NO_6_BYTE> [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device American Megatrends Inc. Virtual HardDisk Device (0x046b:0xff31) [...] ugen1.8: <American Megatrends Inc. Virtual HardDisk Device> at usbus1 [...] umass3 on uhub4 [...] umass3: <American Megatrends Inc. Virtual HardDisk Device, class 0/0, rev 2.00/1.00, addr 8> on usbus1 [...] umass3: SCSI over Bulk-Only; quirks = 0x0105 [...] umass3:5:3: Attached to scbus5 [...] da2 at umass-sim3 bus 3 scbus5 target 0 lun 0 [...] da2: <AMI Virtual HDISK0 1.00> Removable Direct Access SCSI device [...] da2: Serial Number... [...] da2: 40.000MB/s transfers [...] da2: Attempt to query device size failed: NOT READY, Medium not present [...] da2: quirks=0x2<NO_6_BYTE> [...] ichsmb0: <Intel Lynx Point SMBus controller> port 0xf000-0xf01f mem 0xdfe00000-0xdfe000ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] ums0 on uhub4 [...] ums0: <American Megatrends Inc. Virtual Keyboard and Mouse, class 0/0, rev 1.10/1.00, addr 5> on usbus1 [...] ums0: 3 buttons and [Z] coordinates ID=0 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] g_vfs_done():ada0p1[READ(offset=0, length=8192)]error = 5 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] igb4: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE stable/25.1-n269614-36155813721 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i5-4590S CPU @ 3.00GHz (2993.17-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16553959424 (15787 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 3 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf04d0-0xf04ee [...] smbios0: Version: 2.8, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) I350 (Fiber)> mem 0xdfd60000-0xdfd7ffff,0xdfd8c000-0xdfd8ffff irq 17 at device 0.0 on pci2 [...] igb0: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I350 (Fiber)> mem 0xdfd40000-0xdfd5ffff,0xdfd88000-0xdfd8bfff irq 18 at device 0.1 on pci2 [...] igb1: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I350 (Fiber)> mem 0xdfd20000-0xdfd3ffff,0xdfd84000-0xdfd87fff irq 19 at device 0.2 on pci2 [...] igb2: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I350 (Fiber)> mem 0xdfd00000-0xdfd1ffff,0xdfd80000-0xdfd83fff irq 16 at device 0.3 on pci2 [...] igb3: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xdfe03000-0xdfe033ff irq 16 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb4: <Intel(R) I211 (Copper)> mem 0xdfc00000-0xdfc1ffff,0xdfc20000-0xdfc23fff irq 16 at device 0.0 on pci3 [...] igb4: NVM V0.6 imgtype2 [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 2 RX queues 2 TX queues [...] igb4: Using MSI-X interrupts with 3 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb5: <Intel(R) I211 (Copper)> mem 0xdfb00000-0xdfb1ffff,0xdfb20000-0xdfb23fff irq 17 at device 0.0 on pci4 [...] igb5: NVM V0.6 imgtype2 [...] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] igb5: Using 2 RX queues 2 TX queues [...] igb5: Using MSI-X interrupts with 3 vectors [...] igb5: Ethernet address: ... [...] igb5: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igb6: <Intel(R) I211 (Copper)> mem 0xdfa00000-0xdfa1ffff,0xdfa20000-0xdfa23fff irq 18 at device 0.0 on pci5 [...] igb6: NVM V0.6 imgtype2 [...] igb6: Using 1024 TX descriptors and 1024 RX descriptors [...] igb6: Using 2 RX queues 2 TX queues [...] igb6: Using MSI-X interrupts with 3 vectors [...] igb6: Ethernet address: ... [...] igb6: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] igb7: <Intel(R) I211 (Copper)> mem 0xdf900000-0xdf91ffff,0xdf920000-0xdf923fff irq 19 at device 0.0 on pci6 [...] igb7: NVM V0.6 imgtype2 [...] igb7: Using 1024 TX descriptors and 1024 RX descriptors [...] igb7: Using 2 RX queues 2 TX queues [...] igb7: Using MSI-X interrupts with 3 vectors [...] igb7: Ethernet address: ... [...] igb7: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] igb8: <Intel(R) I211 (Copper)> mem 0xdf800000-0xdf81ffff,0xdf820000-0xdf823fff irq 16 at device 0.0 on pci7 [...] igb8: NVM V0.6 imgtype2 [...] igb8: Using 1024 TX descriptors and 1024 RX descriptors [...] igb8: Using 2 RX queues 2 TX queues [...] igb8: Using MSI-X interrupts with 3 vectors [...] igb8: Ethernet address: ... [...] igb8: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib8: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] igb9: <Intel(R) I211 (Copper)> mem 0xdf700000-0xdf71ffff,0xdf720000-0xdf723fff irq 17 at device 0.0 on pci8 [...] igb9: NVM V0.6 imgtype2 [...] igb9: Using 1024 TX descriptors and 1024 RX descriptors [...] igb9: Using 2 RX queues 2 TX queues [...] igb9: Using MSI-X interrupts with 3 vectors [...] igb9: Ethernet address: ... [...] igb9: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib9: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] igb10: <Intel(R) I211 (Copper)> mem 0xdf600000-0xdf61ffff,0xdf620000-0xdf623fff irq 18 at device 0.0 on pci9 [...] igb10: NVM V0.6 imgtype2 [...] igb10: Using 1024 TX descriptors and 1024 RX descriptors [...] igb10: Using 2 RX queues 2 TX queues [...] igb10: Using MSI-X interrupts with 3 vectors [...] igb10: Ethernet address: ... [...] igb10: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib10: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] pcib11: <ACPI PCI-PCI bridge> mem 0xdf500000-0xdf51ffff irq 19 at device 0.0 on pci10 [...] pci11: <ACPI PCI bus> on pcib11 [...] pcib12: <PCI-PCI bridge> irq 16 at device 1.0 on pci11 [...] pci12: <PCI bus> on pcib12 [...] igb11: <Intel(R) I211 (Copper)> mem 0xdf400000-0xdf41ffff,0xdf420000-0xdf423fff irq 16 at device 0.0 on pci12 [...] igb11: NVM V0.6 imgtype2 [...] igb11: Using 1024 TX descriptors and 1024 RX descriptors [...] igb11: Using 2 RX queues 2 TX queues [...] igb11: Using MSI-X interrupts with 3 vectors [...] igb11: Ethernet address: ... [...] igb11: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib13: <PCI-PCI bridge> irq 19 at device 4.0 on pci11 [...] pci13: <PCI bus> on pcib13 [...] igb12: <Intel(R) I211 (Copper)> mem 0xdf300000-0xdf31ffff,0xdf320000-0xdf323fff irq 19 at device 0.0 on pci13 [...] igb12: NVM V0.6 imgtype2 [...] igb12: Using 1024 TX descriptors and 1024 RX descriptors [...] igb12: Using 2 RX queues 2 TX queues [...] igb12: Using MSI-X interrupts with 3 vectors [...] igb12: Ethernet address: ... [...] igb12: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib14: <PCI-PCI bridge> irq 16 at device 5.0 on pci11 [...] pci14: <PCI bus> on pcib14 [...] igb13: <Intel(R) I211 (Copper)> mem 0xdf200000-0xdf21ffff,0xdf220000-0xdf223fff irq 16 at device 0.0 on pci14 [...] igb13: NVM V0.6 imgtype2 [...] igb13: Using 1024 TX descriptors and 1024 RX descriptors [...] igb13: Using 2 RX queues 2 TX queues [...] igb13: Using MSI-X interrupts with 3 vectors [...] igb13: Ethernet address: ... [...] igb13: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib15: <PCI-PCI bridge> irq 17 at device 6.0 on pci11 [...] pci15: <PCI bus> on pcib15 [...] pcib16: <PCI-PCI bridge> irq 17 at device 0.0 on pci15 [...] pci16: <PCI bus> on pcib16 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xde000000-0xdeffffff,0xdf020000-0xdf03ffff irq 17 at device 0.0 on pci16 [...] vgapci0: Boot video device [...] pcib17: <PCI-PCI bridge> irq 18 at device 7.0 on pci11 [...] pci17: <PCI bus> on pcib17 [...] pcib18: <PCI-PCI bridge> irq 19 at device 8.0 on pci11 [...] pci18: <PCI bus> on pcib18 [...] pcib19: <PCI-PCI bridge> irq 16 at device 9.0 on pci11 [...] pci19: <PCI bus> on pcib19 [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xdfe02000-0xdfe023ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xdfe01000-0xdfe017ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1c7c00001e00 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1c7c00001e00 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1c7c00001e00 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1c7c00001e00 [...] device_attach: est3 attach returned 6 [...] Timecounter "TSC-low" frequency 1496534372 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Micron MTFDDAK256TDL M1LN001> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] ugen0.2: <vendor 0x8087 product 0x8008> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] uhub2: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] ugen1.3: <American Megatrends Inc. Virtual Hub> at usbus1 [...] uhub4 on uhub3 [...] uhub4: <American Megatrends Inc. Virtual Hub, class 9/0, rev 2.00/1.00, addr 3> on usbus1 [...] Root mount waiting for: usbus1 [...] uhub4: 5 ports with 5 removable, self powered [...] ugen1.4: <American Megatrends Inc. Virtual Keyboard and Mouse> at usbus1 [...] ukbd0 on uhub4 [...] ukbd0: <American Megatrends Inc. Virtual Keyboard and Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus1 [...] kbd1 at ukbd0 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device American Megatrends Inc. Virtual Cdrom Device (0x046b:0xff20) [...] ugen1.5: <American Megatrends Inc. Virtual Cdrom Device> at usbus1 [...] umass0 on uhub4 [...] umass0: <American Megatrends Inc. Virtual Cdrom Device, class 0/0, rev 2.00/1.00, addr 5> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:2:0: Attached to scbus2 [...] cd0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] cd0: <AMI Virtual CDROM0 1.00> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 40.000MB/s transfers [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] Root mount waiting for: usbus1 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device American Megatrends Inc. Virtual Floppy Device (0x046b:0xff40) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device American Megatrends Inc. Virtual Floppy Device (0x046b:0xff40) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device American Megatrends Inc. Virtual Floppy Device (0x046b:0xff40) [...] ugen1.6: <American Megatrends Inc. Virtual Floppy Device> at usbus1 [...] umass1 on uhub4 [...] umass1: <American Megatrends Inc. Virtual Floppy Device, class 0/0, rev 2.00/1.00, addr 6> on usbus1 [...] umass1: SCSI over Bulk-Only; quirks = 0x0105 [...] umass1:3:1: Attached to scbus3 [...] da0 at umass-sim1 bus 1 scbus3 target 0 lun 0 [...] da0: <AMI Virtual Floppy0 1.00> Removable Direct Access SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] Root mount waiting for: usbus1 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device American Megatrends Inc. Virtual HardDisk Device (0x046b:0xff31) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device American Megatrends Inc. Virtual HardDisk Device (0x046b:0xff31) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device American Megatrends Inc. Virtual HardDisk Device (0x046b:0xff31) [...] ugen1.7: <American Megatrends Inc. Virtual HardDisk Device> at usbus1 [...] umass2 on uhub4 [...] umass2: <American Megatrends Inc. Virtual HardDisk Device, class 0/0, rev 2.00/1.00, addr 7> on usbus1 [...] umass2: SCSI over Bulk-Only; quirks = 0x0105 [...] umass2:4:2: Attached to scbus4 [...] da1 at umass-sim2 bus 2 scbus4 target 0 lun 0 [...] da1: <AMI Virtual HDISK0 1.00> Removable Direct Access SCSI device [...] da1: Serial Number... [...] da1: 40.000MB/s transfers [...] da1: Attempt to query device size failed: NOT READY, Medium not present [...] da1: quirks=0x2<NO_6_BYTE> [...] igb4: link state changed to UP [...] ichsmb0: <Intel Lynx Point SMBus controller> port 0xf000-0xf01f mem 0xdfe00000-0xdfe000ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] ums0 on uhub4 [...] ums0: <American Megatrends Inc. Virtual Keyboard and Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus1 [...] ums0: 3 buttons and [Z] coordinates ID=0 [...] pflog0: permanently promiscuous mode enabled [...] igb4: link state changed to DOWN [...] igb4: link state changed to UP [...] pid 44114 (sh), jid 0, uid 0: exited on signal 10 (no core dump - bad address) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 275 274 2 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p3 stable/25.1-n269769-0381600e81a4 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i5-4590S CPU @ 3.00GHz (2993.14-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16553959424 (15787 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 2 3 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf04d0-0xf04ee [...] smbios0: Version: 2.8, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) I350 (Fiber)> mem 0xdfd60000-0xdfd7ffff,0xdfd8c000-0xdfd8ffff irq 17 at device 0.0 on pci2 [...] igb0: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) I350 (Fiber)> mem 0xdfd40000-0xdfd5ffff,0xdfd88000-0xdfd8bfff irq 18 at device 0.1 on pci2 [...] igb1: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) I350 (Fiber)> mem 0xdfd20000-0xdfd3ffff,0xdfd84000-0xdfd87fff irq 19 at device 0.2 on pci2 [...] igb2: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) I350 (Fiber)> mem 0xdfd00000-0xdfd1ffff,0xdfd80000-0xdfd83fff irq 16 at device 0.3 on pci2 [...] igb3: EEPROM V1.63-0 eTrack 0x80000a00 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xdfe03000-0xdfe033ff irq 16 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb4: <Intel(R) I211 (Copper)> mem 0xdfc00000-0xdfc1ffff,0xdfc20000-0xdfc23fff irq 16 at device 0.0 on pci3 [...] igb4: NVM V0.6 imgtype2 [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 2 RX queues 2 TX queues [...] igb4: Using MSI-X interrupts with 3 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb5: <Intel(R) I211 (Copper)> mem 0xdfb00000-0xdfb1ffff,0xdfb20000-0xdfb23fff irq 17 at device 0.0 on pci4 [...] igb5: NVM V0.6 imgtype2 [...] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] igb5: Using 2 RX queues 2 TX queues [...] igb5: Using MSI-X interrupts with 3 vectors [...] igb5: Ethernet address: ... [...] igb5: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igb6: <Intel(R) I211 (Copper)> mem 0xdfa00000-0xdfa1ffff,0xdfa20000-0xdfa23fff irq 18 at device 0.0 on pci5 [...] igb6: NVM V0.6 imgtype2 [...] igb6: Using 1024 TX descriptors and 1024 RX descriptors [...] igb6: Using 2 RX queues 2 TX queues [...] igb6: Using MSI-X interrupts with 3 vectors [...] igb6: Ethernet address: ... [...] igb6: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] igb7: <Intel(R) I211 (Copper)> mem 0xdf900000-0xdf91ffff,0xdf920000-0xdf923fff irq 19 at device 0.0 on pci6 [...] igb7: NVM V0.6 imgtype2 [...] igb7: Using 1024 TX descriptors and 1024 RX descriptors [...] igb7: Using 2 RX queues 2 TX queues [...] igb7: Using MSI-X interrupts with 3 vectors [...] igb7: Ethernet address: ... [...] igb7: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] igb8: <Intel(R) I211 (Copper)> mem 0xdf800000-0xdf81ffff,0xdf820000-0xdf823fff irq 16 at device 0.0 on pci7 [...] igb8: NVM V0.6 imgtype2 [...] igb8: Using 1024 TX descriptors and 1024 RX descriptors [...] igb8: Using 2 RX queues 2 TX queues [...] igb8: Using MSI-X interrupts with 3 vectors [...] igb8: Ethernet address: ... [...] igb8: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib8: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] igb9: <Intel(R) I211 (Copper)> mem 0xdf700000-0xdf71ffff,0xdf720000-0xdf723fff irq 17 at device 0.0 on pci8 [...] igb9: NVM V0.6 imgtype2 [...] igb9: Using 1024 TX descriptors and 1024 RX descriptors [...] igb9: Using 2 RX queues 2 TX queues [...] igb9: Using MSI-X interrupts with 3 vectors [...] igb9: Ethernet address: ... [...] igb9: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib9: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] igb10: <Intel(R) I211 (Copper)> mem 0xdf600000-0xdf61ffff,0xdf620000-0xdf623fff irq 18 at device 0.0 on pci9 [...] igb10: NVM V0.6 imgtype2 [...] igb10: Using 1024 TX descriptors and 1024 RX descriptors [...] igb10: Using 2 RX queues 2 TX queues [...] igb10: Using MSI-X interrupts with 3 vectors [...] igb10: Ethernet address: ... [...] igb10: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib10: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] pcib11: <ACPI PCI-PCI bridge> mem 0xdf500000-0xdf51ffff irq 19 at device 0.0 on pci10 [...] pci11: <ACPI PCI bus> on pcib11 [...] pcib12: <PCI-PCI bridge> irq 16 at device 1.0 on pci11 [...] pci12: <PCI bus> on pcib12 [...] igb11: <Intel(R) I211 (Copper)> mem 0xdf400000-0xdf41ffff,0xdf420000-0xdf423fff irq 16 at device 0.0 on pci12 [...] igb11: NVM V0.6 imgtype2 [...] igb11: Using 1024 TX descriptors and 1024 RX descriptors [...] igb11: Using 2 RX queues 2 TX queues [...] igb11: Using MSI-X interrupts with 3 vectors [...] igb11: Ethernet address: ... [...] igb11: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib13: <PCI-PCI bridge> irq 19 at device 4.0 on pci11 [...] pci13: <PCI bus> on pcib13 [...] igb12: <Intel(R) I211 (Copper)> mem 0xdf300000-0xdf31ffff,0xdf320000-0xdf323fff irq 19 at device 0.0 on pci13 [...] igb12: NVM V0.6 imgtype2 [...] igb12: Using 1024 TX descriptors and 1024 RX descriptors [...] igb12: Using 2 RX queues 2 TX queues [...] igb12: Using MSI-X interrupts with 3 vectors [...] igb12: Ethernet address: ... [...] igb12: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib14: <PCI-PCI bridge> irq 16 at device 5.0 on pci11 [...] pci14: <PCI bus> on pcib14 [...] igb13: <Intel(R) I211 (Copper)> mem 0xdf200000-0xdf21ffff,0xdf220000-0xdf223fff irq 16 at device 0.0 on pci14 [...] igb13: NVM V0.6 imgtype2 [...] igb13: Using 1024 TX descriptors and 1024 RX descriptors [...] igb13: Using 2 RX queues 2 TX queues [...] igb13: Using MSI-X interrupts with 3 vectors [...] igb13: Ethernet address: ... [...] igb13: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib15: <PCI-PCI bridge> irq 17 at device 6.0 on pci11 [...] pci15: <PCI bus> on pcib15 [...] pcib16: <PCI-PCI bridge> irq 17 at device 0.0 on pci15 [...] pci16: <PCI bus> on pcib16 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xde000000-0xdeffffff,0xdf020000-0xdf03ffff irq 17 at device 0.0 on pci16 [...] vgapci0: Boot video device [...] pcib17: <PCI-PCI bridge> irq 18 at device 7.0 on pci11 [...] pci17: <PCI bus> on pcib17 [...] pcib18: <PCI-PCI bridge> irq 19 at device 8.0 on pci11 [...] pci18: <PCI bus> on pcib18 [...] pcib19: <PCI-PCI bridge> irq 16 at device 9.0 on pci11 [...] pci19: <PCI bus> on pcib19 [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xdfe02000-0xdfe023ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xdfe01000-0xdfe017ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1c7c00001e00 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1c7c00001e00 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1c7c00001e00 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1c7c00001e00 [...] device_attach: est3 attach returned 6 [...] Timecounter "TSC-low" frequency 1496534388 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Micron MTFDDAK256TDL M1LN001> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] ugen0.2: <vendor 0x8087 product 0x8008> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus0 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub2: 8 ports with 8 removable, self powered [...] ugen1.3: <American Megatrends Inc. Virtual Hub> at usbus1 [...] uhub4 on uhub2 [...] uhub4: <American Megatrends Inc. Virtual Hub, class 9/0, rev 2.00/1.00, addr 3> on usbus1 [...] Root mount waiting for: usbus1 [...] uhub4: 5 ports with 5 removable, self powered [...] ugen1.4: <American Megatrends Inc. Virtual Keyboard and Mouse> at usbus1 [...] ukbd0 on uhub4 [...] ukbd0: <American Megatrends Inc. Virtual Keyboard and Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus1 [...] kbd1 at ukbd0 [...] Root mount waiting for: usbus1 [...] Root mount waiting for:usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device American Megatrends Inc. Virtual Cdrom Device (0x046b: usbus1 [...] 0xff20) [...] ugen1.5: <American Megatrends Inc. Virtual Cdrom Device> at usbus1 [...] umass0 on uhub4 [...] umass0: <American Megatrends Inc. Virtual Cdrom Device, class 0/0, rev 2.00/1.00, addr 5> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:2:0: Attached to scbus2 [...] cd0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] cd0: <AMI Virtual CDROM0 1.00> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 40.000MB/s transfers [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] Root mount waiting for: usbus1 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device American Megatrends Inc. Virtual Floppy Device (0x046b:0xff40) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device American Megatrends Inc. Virtual Floppy Device (0x046b:0xff40) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device American Megatrends Inc. Virtual Floppy Device (0x046b:0xff40) [...] ugen1.6: <American Megatrends Inc. Virtual Floppy Device> at usbus1 [...] umass1 on uhub4 [...] umass1: <American Megatrends Inc. Virtual Floppy Device, class 0/0, rev 2.00/1.00, addr 6> on usbus1 [...] umass1: SCSI over Bulk-Only; quirks = 0x0105 [...] umass1:3:1: Attached to scbus3 [...] da0 at umass-sim1 bus 1 scbus3 target 0 lun 0 [...] da0: <AMI Virtual Floppy0 1.00> Removable Direct Access SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] Root mount waiting for: usbus1 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device American Megatrends Inc. Virtual HardDisk Device (0x046b:0xff31) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device American Megatrends Inc. Virtual HardDisk Device (0x046b:0xff31) [...] Root mount waiting for: usbus1 [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device American Megatrends Inc. Virtual HardDisk Device (0x046b:0xff31) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device American Megatrends Inc. Virtual HardDisk Device (0x046b:0xff31) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device American Megatrends Inc. Virtual HardDisk Device (0x046b:0xff31) [...] usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device American Megatrends Inc. Virtual HardDisk Device (0x046b:0xff31) [...] ugen1.7: <American Megatrends Inc. Virtual HardDisk Device> at usbus1 [...] umass2 on uhub4 [...] umass2: <American Megatrends Inc. Virtual HardDisk Device, class 0/0, rev 2.00/1.00, addr 7> on usbus1 [...] umass2: SCSI over Bulk-Only; quirks = 0xc105 [...] umass2:4:2: Attached to scbus4 [...] da1 at umass-sim2 bus 2 scbus4 target 0 lun 0 [...] da1: <AMI Virtual HDISK0 1.00> Removable Direct Access SCSI device [...] da1: Serial Number... [...] da1: 40.000MB/s transfers [...] da1: Attempt to query device size failed: NOT READY, Medium not present [...] da1: quirks=0x2<NO_6_BYTE>