[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p7 stable/23.7-n254871-d5ec322cffc SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i3-6100 CPU @ 3.70GHz (3700.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8126291968 (7749 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 2 3 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe [...] smbios0: Version: 3.0, BCD Revision: 3.0 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xd0000000-0xd0ffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xd1300000-0xd130ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] xhci_interrupt: host controller halted [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xd1314000-0xd1315fff,0xd1318000-0xd13180ff,0xd1317000-0xd13177ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci2: <ACPI PCI bus> on pcib3 [...] re0: <RealTek 8168 Gigabit Ethernet> port 0xe000-0xe0ff mem 0xd1204000-0xd1204fff,0xd1200000-0xd1203fff irq 18 at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci3: <ACPI PCI bus> on pcib4 [...] re1: <RealTek 8168 Gigabit Ethernet> port 0xd000-0xd0ff mem 0xd1104000-0xd1104fff,0xd1100000-0xd1103fff irq 19 at device 0.0 on pci3 [...] re1: Using 1 MSI-X message [...] re1: ASPM disabled [...] re1: Chip rev. 0x54000000 [...] re1: MAC rev. 0x00100000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0 [...] pcib6: <ACPI PCI-PCI bridge> irq 19 at device 29.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib6 [...] re2: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xc000-0xc0ff mem 0xd1004000-0xd1004fff,0xd1000000-0xd1003fff irq 19 at device 0.0 on pci4 [...] re2: Using 1 MSI-X message [...] re2: ASPM disabled [...] re2: Chip rev. 0x54000000 [...] re2: MAC rev. 0x00100000 [...] miibus2: <MII bus> on re2 [...] rgephy2: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus2 [...] rgephy2: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re2: Using defaults for TSO: 65518/35/2048 [...] re2: Ethernet address: ... [...] re2: netmap queues/slots: TX 1/256, RX 1/256 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC-low" frequency 1847996500 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <WDC WD3200AAKS-75L9A0 01.03E01> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 305245MB (625142448 512 byte sectors) [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: pass1,cd0 in 'Slot 01', SATA Slot: scbus1 target 0 [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <ASUS DRW-24F1ST c 1.00> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] uhub0: 22 ports with 22 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <CHICONY USB NetVista Full Width Keyboard> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <CHICONY USB NetVista Full Width Keyboard, class 0/0, rev 1.10/1.02, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus0 [...] usb_alloc_device: set address 3 failed (USB_ERR_TIMEOUT, ignored) [...] ugen0.3: <Generic USB2.0-CRW> at usbus0 [...] umass0 on uhub0 [...] umass0: <Bulk-In, Bulk-Out, Interface> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4000 [...] umass0:7:0: Attached to scbus7 [...] da0 at umass-sim0 bus 0 scbus7 target 0 lun 0 [...] da0: <Generic- Compact Flash 1.00> Removable Direct Access SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] da1 at umass-sim0 bus 0 scbus7 target 0 lun 1 [...] da1: <Generic- SM/xD-Picture 1.00> Removable Direct Access SCSI device [...] da1: Serial Number... [...] da1: 40.000MB/s transfers [...] da1: Attempt to query device size failed: NOT READY, Medium not present [...] da1: quirks=0x2<NO_6_BYTE> [...] da2 at umass-sim0 bus 0 scbus7 target 0 lun 2 [...] da2: <Generic- SD/MMC 1.00> Removable Direct Access SCSI device [...] da2: Serial Number... [...] da2: 40.000MB/s transfers [...] da2: Attempt to query device size failed: NOT READY, Medium not present [...] da2: quirks=0x2<NO_6_BYTE> [...] da3 at umass-sim0 bus 0 scbus7 target 0 lun 3 [...] da3: <Generic- MS/MS-Pro 1.00> Removable Direct Access SCSI device [...] da3: Serial Number... [...] da3: 40.000MB/s transfers [...] da3: Attempt to query device size failed: NOT READY, Medium not present [...] da3: quirks=0x2<NO_6_BYTE>