[...] Copyright (c) FE77-8477 The DragonFly Project. [...] Copyright (c) AC00-C18A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] DragonFly v5.8.0-RELEASE #7: Mon Mar 2 12:28:23 EST 2020 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX [...] acpi_hpet: frequency 14318180 [...] Using cputimer HPET for TSC calibration [...] Timer latency (in TSC ticks): 1447 min=1408 max=1496 [...] TSC invariant clock: 2394560111 Hz [...] CPU: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz (2394.56-MHz K8-class CPU) [...] Origin = "GenuineIntel" Id = 0x206a7 Stepping = 7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x17bae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,AVX> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Thermal and PM Features=0x77<SENSOR,TURBO,ARAT,PLN,ECMD,PTM> [...] MONITOR/MWAIT Features=0x3<CST,INTBRK> [...] real memory = 8530024448 (8134 MB) [...] avail memory = 8187744256 (7808 MB) [...] LAPIC: enter X2APIC mode [...] madt_lapic_probe: lapic_count=4 x2apic_count=0 [...] ACPI CPUS = 4 [...] lapic: TSC Deadline Mode: shift 1, frequency 1197280055 Hz [...] CPU Topology: cores_per_chip: 2; threads_per_core: 2; chips_per_package: 1; [...] srat_probe: can't locate SRAT [...] Initialize MI interrupts for 4 cpus [...] TSC testing MP synchronization ... [...] TSC MPSYNC TEST 208 4 -> 52 (10uS=23945) [...] TSC is MP synchronized [...] TSC: cputimer freq 74830003, shift 5 [...] Spectre: support=( none ) req=ffff operating=( none ) [...] MDS: support=( none ) req=ffff operating=( none ) [...] VMM: available, disabled by default [...] machdep.meltdown_mitigation enabled to protect against (mostly Intel) meltdown bug [...] system call performance will be impacted [...] interrupt uses mplock: swi_taskq [...] wdog: In-kernel automatic watchdog reset enabled [...] md0: Malloc disk [...] evdev device loaded. [...] kbd1 at kbdmux0 [...] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO) [...] ACPI: XSDT 0x00000000BCFFE120 00008C (v01 LENOVO CB-01 00000001 01000013) [...] ACPI: FACP 0x00000000BCFFB000 0000F4 (v04 LENOVO CB-01 00000001 ACPI 00040000) [...] ACPI: DSDT 0x00000000BCFEE000 00938E (v01 LENOVO CB-01 00000001 ACPI 00040000) [...] ACPI: FACS 0x00000000BCF6E000 000040 [...] ACPI: SLIC 0x00000000BCFFD000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000) [...] ACPI: ASF! 0x00000000BCFFC000 0000A5 (v32 INSYDE HR CRB 00000001 ACPI 00040000) [...] ACPI: HPET 0x00000000BCFFA000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000) [...] ACPI: APIC 0x00000000BCFF9000 00008C (v02 INSYDE HR CRB 00000001 ACPI 00040000) [...] ACPI: MCFG 0x00000000BCFF8000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000) [...] ACPI: WDAT 0x00000000BCFED000 000224 (v01 INSYDE HR CRB 00000001 ACPI 00040000) [...] ACPI: SSDT 0x00000000BCFEC000 0006FE (v01 INSYDE HR CRB 00001000 ACPI 00040000) [...] ACPI: BOOT 0x00000000BCFEA000 000028 (v01 INSYDE HR CRB 00000001 ACPI 00040000) [...] ACPI: ASPT 0x00000000BCFE7000 000034 (v07 INSYDE HR CRB 00000001 ACPI 00040000) [...] ACPI: SSDT 0x00000000BCFE6000 0007C2 (v01 INSYDE HR CRB 00003000 ACPI 00040000) [...] ACPI: SSDT 0x00000000BCFE5000 000996 (v01 INSYDE HR CRB 00003000 ACPI 00040000) [...] ACPI: SSDT 0x00000000BCFE3000 0016E0 (v01 INSYDE HR CRB 00001000 ACPI 00040000) [...] sc0: <System console> on motherboard [...] sc0: VGA <16 virtual consoles, flags=0x300> [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <LENOVO CB-01> on motherboard [...] ACPI: 5 ACPI AML tables successfully acquired and loaded [...] ACPI FADT: SCI testing interrupt mode ... [...] ACPI FADT: SCI select level/high [...] acpi0: Power Button (fixed) [...] acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] acpi_timer0 on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFF800D1585500 00067C (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [...] cpu_cst0: <ACPI CPU C-State> on cpu0 [...] cpu_pst0: <ACPI CPU P-State> on cpu0 [...] clockmod0: <CPU clock modulation> on cpu0 [...] perfbias0: <CPU perf-energy bias> on cpu0 [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] cpu1: <ACPI CPU> on acpi0 [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFF800D134C3C0 000303 (v01 PmRef ApIst 00003000 INTL 20100121) [...] ACPI: Dynamic OEM Table Load: [...] ACPI: SSDT 0xFFFFF8005B2F7F40 000119 (v01 PmRef ApCst 00003000 INTL 20100121) [...] cpu_cst1: <ACPI CPU C-State> on cpu1 [...] cpu_pst1: <ACPI CPU P-State> on cpu1 [...] clockmod1: <CPU clock modulation> on cpu1 [...] perfbias1: <CPU perf-energy bias> on cpu1 [...] coretemp1: <CPU On-Die Thermal Sensors> on cpu1 [...] cpu2: <ACPI CPU> on acpi0 [...] cpu_cst2: <ACPI CPU C-State> on cpu2 [...] cpu_pst2: <ACPI CPU P-State> on cpu2 [...] clockmod2: <CPU clock modulation> on cpu2 [...] perfbias2: <CPU perf-energy bias> on cpu2 [...] coretemp2: <CPU On-Die Thermal Sensors> on cpu2 [...] cpu3: <ACPI CPU> on acpi0 [...] cpu_cst3: <ACPI CPU C-State> on cpu3 [...] cpu_pst3: <ACPI CPU P-State> on cpu3 [...] clockmod3: <CPU clock modulation> on cpu3 [...] perfbias3: <CPU perf-energy bias> on cpu3 [...] coretemp3: <CPU On-Die Thermal Sensors> on cpu3 [...] acpi_ec0: <Embedded Controller: GPE 0x17> port 0x66,0x62 on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xe0600000-0xe061ffff,0xc0000000-0xcfffffff irq 16 at device 0.0 on pci1 [...] vgapci1: <VGA-compatible display> port 0x4000-0x403f mem 0xd0000000-0xdfffffff,0xe0000000-0xe03fffff irq 16 at device 2.0 on pci0 [...] vgapci1: Boot video device [...] pci0: <simple comms> (vendor 0x8086, dev 0x1c3a) at device 22.0 irq 16 [...] ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe160a000-0xe160a3ff irq 16 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] pci0: <multimedia, HDA> (vendor 0x8086, dev 0x1c20) at device 27.0 irq 22 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci7: <ACPI PCI bus> on pcib2 [...] alc0: <Atheros AR8152 v2.0 PCIe Fast Ethernet> port 0x2000-0x207f mem 0xe0500000-0xe053ffff irq 16 at device 0.0 on pci7 [...] alc0: 2048 Tx FIFO, 5376 Rx FIFO [...] ugen0.1: <Intel> at usbus0 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] miibus0: <MII bus> on alc0 [...] atphy0: <Atheros F2 10/100 PHY> on miibus0 [...] atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] atphy1: <Atheros F2 10/100 PHY> on miibus0 [...] atphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] atphy2: <Atheros F2 10/100 PHY> on miibus0 [...] atphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] atphy3: <Atheros F2 10/100 PHY> on miibus0 [...] atphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] atphy4: <Atheros F2 10/100 PHY> on miibus0 [...] atphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] atphy5: <Atheros F2 10/100 PHY> on miibus0 [...] atphy5: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] atphy6: <Atheros F2 10/100 PHY> on miibus0 [...] atphy6: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] atphy7: <Atheros F2 10/100 PHY> on miibus0 [...] atphy7: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] atphy8: <Atheros F2 10/100 PHY> on miibus0 [...] atphy8: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] atphy9: <Atheros F2 10/100 PHY> on miibus0 [...] atphy9: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] atphy10: <Atheros F2 10/100 PHY> on miibus0 [...] atphy10: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] atphy11: <Atheros F2 10/100 PHY> on miibus0 [...] atphy11: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] atphy12: <Atheros F2 10/100 PHY> on miibus0 [...] atphy12: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] atphy13: <Atheros F2 10/100 PHY> on miibus0 [...] atphy13: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] atphy14: <Atheros F2 10/100 PHY> on miibus0 [...] atphy14: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] atphy15: <Atheros F2 10/100 PHY> on miibus0 [...] atphy15: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] atphy16: <Atheros F2 10/100 PHY> on miibus0 [...] atphy16: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] atphy17: <Atheros F2 10/100 PHY> on miibus0 [...] atphy17: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] atphy18: <Atheros F2 10/100 PHY> on miibus0 [...] atphy18: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] atphy19: <Atheros F2 10/100 PHY> on miibus0 [...] atphy19: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] atphy20: <Atheros F2 10/100 PHY> on miibus0 [...] atphy20: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] atphy21: <Atheros F2 10/100 PHY> on miibus0 [...] atphy21: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] atphy22: <Atheros F2 10/100 PHY> on miibus0 [...] atphy22: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] atphy23: <Atheros F2 10/100 PHY> on miibus0 [...] atphy23: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] atphy24: <Atheros F2 10/100 PHY> on miibus0 [...] atphy24: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] atphy25: <Atheros F2 10/100 PHY> on miibus0 [...] atphy25: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] atphy26: <Atheros F2 10/100 PHY> on miibus0 [...] atphy26: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] atphy27: <Atheros F2 10/100 PHY> on miibus0 [...] atphy27: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] atphy28: <Atheros F2 10/100 PHY> on miibus0 [...] atphy28: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] atphy29: <Atheros F2 10/100 PHY> on miibus0 [...] atphy29: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] atphy30: <Atheros F2 10/100 PHY> on miibus0 [...] atphy30: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] atphy31: <Atheros F2 10/100 PHY> on miibus0 [...] atphy31: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [...] alc0: MAC address: XXX [...] pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0 [...] pci8: <ACPI PCI bus> on pcib3 [...] iwn0: <Intel Centrino Wireless-N + WiMAX 6150> mem 0xe0400000-0xe0401fff irq 17 at device 0.0 on pci8 [...] ehci1: <EHCI (generic) USB 2.0 controller> mem 0xe1609000-0xe16093ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <AHCI-PCI-SATA> port 0x4060-0x407f,0x4098-0x409b,0x4080-0x4087,0x409c-0x409f,0x4088-0x408f mem 0xe1608000-0xe16087ff irq 19 at device 31.2 on pci0 [...] ugen1.1: <Intel> at usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ahci0: Intel hocus pocus [...] ahci0: AHCI 1.3 cap 0xef30ff45<S64A,NCQ,SSNTF,SSS,SALP,SAL,SCLO,PMD,SSC,PSC,EMS> cap2 0x4<APST>, 6 ports, 32 tags/port, gen 3 (6Gbps) [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] ugen0.2: <vendor 0x8087> at usbus0 [...] uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] ugen1.2: <vendor 0x8087> at usbus1 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] uhub2: 6 ports with 6 removable, self powered [...] uhub3: 6 ports with 6 removable, self powered [...] ugen0.3: <Intel Corporation> at usbus0 [...] ugen0.4: <Generic> at usbus0 [...] ahci0.0: Found DISK "HGST HTS721010A9E630 JB0OA3J0" serial=... [...] ahci0.0: tags=32/32 satacap=970e satacap2=0006 satafea=005e NCQ=YES capacity=953869.71MB [...] ahci0.0: f85=7469 f86=bc49 f87=6163 WC=enabled RA=enabled SEC=frozen [...] ahci0.2: Found ATAPI "Optiarc DVD RW AD-7710H A833" serial=... [...] ahci0.2: tags=0/32 satacap=0402 satacap2=0000 satafea=0068 NCQ=NO capacity=1.00MB [...] ahci0.2: f85=4218 f86=0000 f87=4000 WC=notsupp RA=notsupp SEC=notsupp [...] ahci0.2: TFES ccb=0xfffff800d66c18c0 slot=5 RFIS-34 flg=40 st=51 err=54 dev=40 off=0/1536 [...] ahci0.2: TFES ccb=0xfffff800d66c18c0 slot=7 RFIS-34 flg=40 st=51 err=24 dev=40 off=0/1536 [...] pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x1c22) at device 31.3 irq 19 [...] atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] ugen1.3: <ADATA> at usbus1 [...] umass0: <ADATA ADATA USB Flash Drive, class 0/0, rev 2.10/11.00, addr 3> on usbus1 [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] interrupt uses mplock: psm0 [...] psm0: model Generic PS/2 mouse, device ID 0 [...] ACPI: Enabled 5 GPEs in block 00 to 3F [...] aesni0: <AES-CBC,AES-XTS> on motherboard [...] padlock0: No ACE support. [...] rdrand0: No RdRand support. [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0 [...] vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 [...] sio0: can't drain, serial port might not exist, disabling [...] sio1: can't drain, serial port might not exist, disabling [...] hpt27xx: no controller detected. [...] CAM: Configuring 3 busses [...] ahci0.2: TFES ccb=0xfffff800d66c18c0 slot=10 RFIS-34 flg=40 st=51 err=24 dev=40 off=0/1536 [...] ahci0.2: TFES ccb=0xfffff800d66c18c0 slot=13 RFIS-34 flg=40 st=51 err=54 dev=40 off=0/1536 [...] CAM: finished configuring all busses [...] da0 at ahci0 bus 0 target 0 lun 0 [...] da0: <SATA HGST HTS721010A9 JB0O> Fixed Direct Access SCSI-4 device [...] da0: Serial Number... [...] da0: 600.000MB/s transfers [...] da0: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) [...] ahci0.2: TFES ccb=0xfffff800d66c18c0 slot=15 RFIS-34 flg=40 st=51 err=24 dev=40 off=0/1536 [...] da8 at umass-sim0 bus 0 target 0 lun 0 [...] da8: <ADATA USB Flash Drive 1100> Removable Direct Access SCSI-6 device [...] da8: Serial Number... [...] da8: 40.000MB/s transfers [...] da8: 14800MB (30310400 512 byte sectors: 255H 63S/T 1886C) [...] cd0 at ahci0 bus 2 target 0 lun 0 [...] cd0: <Optiarc DVD RW AD-7710H A833> Removable CD-ROM SCSI-0 device [...] cd0: 150.000MB/s transfers [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] ugen1.4: <Chicony Corp.> at usbus1 [...] Mounting root from hammer2:serno/XXXXXXXXXXXXXXXXXX [...] hammer2_mount: root 'serno/XXXXXXXXXXXXXXXXXX' [...] hammer2_mount: dev="serno/XXXXXXXXXXXXXXXXXX" label="ROOT" rdonly=1 [...] hammer2: using volume header #2 [...] hammer2_mount hmp=0xfffff800d7ea0000 pmp=0xfffff800d57e0200 [...] DMA space used: 10624k, remaining available: 131072k [...] Mounting devfs [...] hammer2_mount: '/dev/serno/XXXXXXXXXXXXXXXXXXXXXXX' [...] hammer2_mount: dev="/dev/serno/XXXXXXXXXXXXXXXXXX" label="ROOT" rdonly=1 [...] hammer2 mount "serno/XXXXXXXXXXXXXXXXXX": no recovery needed [...] hammer2_mount: '/dev/serno/XXXXXXXXXXXXXXXXXXXXXXX' [...] hammer2_mount: dev="/dev/serno/XXXXXXXXXXXXXXXXXX" label="DATA" rdonly=0 [...] hammer2: using volume header #2 [...] hammer2 mount "/dev/serno/XXXXXXXXXXXXXXXXXX": no recovery needed [...] hammer2_mount hmp=0xfffff801e3980000 pmp=0xfffff800d57e4400 [...] swap low/high-water marks set to 167769/251654