[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.0-STABLE GENERIC amd64 [...] FreeBSD clang version 17.0.6 (https://github.com/llvm/llvm-project.git llvmorg-17.0.6-0-g6009708b4367) [...] VT(efifb): resolution 1366x768 [...] CPU: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz (2400.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x406e3 Family=0x6 Model=0x4e Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8065343488 (7691 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <FUJ PC > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 2 3 [...] Cuse v0.1.37 @ /dev/cuse [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x99e10000-0x99e1001e [...] smbios0: Version: 3.0, BCD Revision: 3.0 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <FUJ PC> [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x22> port 0x62,0x66 on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xc0000000-0xc0ffffff,0xb0000000-0xbfffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point-LP USB 3.0 controller> mem 0xc1320000-0xc132ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] xhci_interrupt: host controller halted [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ig4iic0: <Intel Sunrise Point-LP I2C Controller-0> mem 0xc134a000-0xc134afff at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] ig4iic1: <Intel Sunrise Point-LP I2C Controller-1> mem 0xc134b000-0xc134bfff at device 21.1 on pci0 [...] ig4iic1: Using MSI [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Sunrise Point-LP AHCI SATA controller> port 0x3080-0x3087,0x3088-0x308b,0x3060-0x307f mem 0xc1348000-0xc1349fff,0xc134f000-0xc134f0ff,0xc134d000-0xc134d7ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pci2: <network> at device 0.0 (no driver attached) [...] pcib3: <ACPI PCI-PCI bridge> at device 28.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] nvme0: <Generic NVMe Device> mem 0xc1100000-0xc1103fff at device 0.0 on pci3 [...] pcib4: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] sdhci_pci0: <Generic SD HCI> mem 0xc1001000-0xc1001fff,0xc1000000-0xc10007ff at device 0.0 on pci4 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel Sunrise Point-LP HDA Controller> mem 0xc1340000-0xc1343fff,0xc1330000-0xc133ffff at device 31.3 on pci0 [...] em0: <Intel(R) I219-LM SPT> mem 0xc1300000-0xc131ffff at device 31.6 on pci0 [...] em0: EEPROM V0.13-3 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 15.0. [...] psm0: model Elantech Touchpad, device ID 0 [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC-low" frequency 1199997625 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvme0: Allocated 16MB host memory buffer [...] mmcsd0: 128GB <SDHC SC128 8.0 SN ... MFG 01/2018 by 3 SD> at mmc0 50.0MHz/4bit/65535-block [...] hdacc0: <Realtek ALC255 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC255 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC255 (Analog)> at nid 20 and 18 on hdaa0 [...] pcm1: <Realtek ALC255 (Left Analog Headphones)> at nid 33 on hdaa0 [...] hdacc1: <Intel Skylake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Skylake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Skylake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] nda0 at nvme0 bus 0 scbus1 target 0 lun 1 [...] nda0: <Lexar SSD NM620 1TB SN10660 NES245R007388P110N> [...] nda0: Serial Number... [...] nda0: nvme version 1.4 [...] nda0: 976762MB (2000409264 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 18 ports with 18 removable, self powered [...] iic0: <I2C generic I/O> on iicbus0 [...] iic1: <I2C generic I/O> on iicbus1 [...] [drm] Got Intel graphics stolen memory base 0x9c000000, size 0x4000000 [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] drmn0: successfully loaded firmware image 'i915/skl_dmc_ver1_27.bin' [...] lkpi_iic0: <LinuxKPI I2C> on drmn0 [...] iicbus2: <Philips I2C bus> on lkpi_iic0 [...] iic2: <I2C generic I/O> on iicbus2 [...] lkpi_iic1: <LinuxKPI I2C> on drmn0 [...] iicbus3: <Philips I2C bus> on lkpi_iic1 [...] iic3: <I2C generic I/O> on iicbus3 [...] lkpi_iic2: <LinuxKPI I2C> on drmn0 [...] iicbus4: <Philips I2C bus> on lkpi_iic2 [...] drmn0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) [...] iic4: <I2C generic I/O> on iicbus4 [...] drmn0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it [...] drmn0: [drm] [ENCODER:117:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it [...] usb_alloc_device: set address 2 failed (USB_ERR_IOERROR, ignored) [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] lkpi_iic3: <LinuxKPI I2C> on drm1 [...] iicbus5: <Philips I2C bus> on lkpi_iic3 [...] iic5: <I2C generic I/O> on iicbus5 [...] lkpi_iic4: <LinuxKPI I2C> on drm2 [...] iicbus6: <Philips I2C bus> on lkpi_iic4 [...] iic6: <I2C generic I/O> on iicbus6 [...] lkpi_iic5: <LinuxKPI I2C> on drm4 [...] iicbus7: <Philips I2C bus> on lkpi_iic5 [...] iic7: <I2C generic I/O> on iicbus7 [...] [drm] Initialized i915 1.6.0 20201103 for drmn0 on minor 0 [...] VT: Replacing driver "efifb" with new "drmfb". [...] start FB_INFO: [...] height=768 width=1366 depth=32 [...] pbase=0xb0000000 vbase=0xfffff800b0000000 [...] name=drmn0 id=i915drmfb flags=0x0 stride=5504 [...] end FB_INFO [...] Intel(R) Wireless WiFi based driver for FreeBSD [...] ichsmb0: <Intel Sunrise Point-LP SMBus controller> port 0x3040-0x305f mem 0xc134e000-0xc134e0ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] iwm0: <Intel(R) Dual Band Wireless AC 8260> mem 0xc1200000-0xc1201fff at device 0.0 on pci2 [...] iwm0: hw rev 0x200, fw ver 16.242414.0, address XXX [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] hdac0: Command 0x2033b000 timeout on address 2 [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR [...] usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored) [...] wlan0: link state changed to UP [...] usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR [...] usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR [...] usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored) [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled