[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p3 stable/22.7-n250262-83840459d88 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] CPU: Intel(R) Xeon(R) CPU E5310 @ 1.60GHz (1596.11-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x6fb Family=0x6 Model=0xf Stepping=11 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4e33d<SSE3,DTES64,MON,DS_CPL,VMX,TM2,SSSE3,CX16,xTPR,PDCM,DCA> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] VT-x: HLT,PAUSE [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16614821888 (15845 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <DELL PE_SC3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 2 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0: MADT APIC ID 8 != hw id 0 [...] ioapic1: MADT APIC ID 9 != hw id 0 [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 32-55 [...] Launching APs: 5 1 4 7 3 2 6 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] smbios0: <System Management BIOS> at iomem 0xfcdf0-0xfce0e [...] smbios0: Version: 2.5, BCD Revision: 2.5 [...] aesni0: No AES or SHA support. [...] acpi0: <DELL PE_SC3> [...] acpi0: Power Button (fixed) [...] Firmware Error (ACPI): Could not resolve symbol [\134_SB._OSC.CDW1], AE_NOT_FOUND (20201113/psargs-503) [...] ACPI Error: Aborting method \134_SB._OSC due to previous error (AE_NOT_FOUND) (20201113/psparse-689) [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 1.0 on pci2 [...] pcib4: failed to allocate initial I/O port window: 0xe000-0xefff [...] pci4: <ACPI PCI bus> on pcib4 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> mem 0xfc7ff000-0xfc7fffff,0xd80fc000-0xd80fffff irq 17 at device 0.0 on pci4 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x2c000000 [...] re0: MAC rev. 0x00200000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib5: <ACPI PCI-PCI bridge> at device 0.3 on pci1 [...] pci5: <ACPI PCI bus> on pcib5 [...] re1: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port 0xdc00-0xdcff mem 0xfc6dfc00-0xfc6dfcff irq 36 at device 2.0 on pci5 [...] re1: Chip rev. 0x10000000 [...] re1: MAC rev. 0x00000000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib6: <ACPI PCI-PCI bridge> at device 3.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> at device 4.0 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <PCI-PCI bridge> at device 0.0 on pci7 [...] pci8: <PCI bus> on pcib8 [...] bce0: <QLogic NetXtreme II BCM5708 1000Base-T (B2)> mem 0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci8 [...] miibus2: <MII bus> on bce0 [...] brgphy0: <BCM5708C 1000BASE-T media interface> PHY 1 on miibus2 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bce0: Using defaults for TSO: 65518/35/2048 [...] bce0: Ethernet address: ... [...] bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (2.9.1); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI) [...] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] pcib9: <ACPI PCI-PCI bridge> at device 5.0 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] pcib10: <ACPI PCI-PCI bridge> at device 6.0 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] pcib11: <PCI-PCI bridge> at device 7.0 on pci0 [...] pci11: <PCI bus> on pcib11 [...] pcib12: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci12: <ACPI PCI bus> on pcib12 [...] pcib13: <PCI-PCI bridge> at device 0.0 on pci12 [...] pci13: <PCI bus> on pcib13 [...] bce1: <QLogic NetXtreme II BCM5708 1000Base-T (B2)> mem 0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci13 [...] miibus3: <MII bus> on bce1 [...] brgphy1: <BCM5708C 1000BASE-T media interface> PHY 1 on miibus3 [...] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bce1: Using defaults for TSO: 65518/35/2048 [...] bce1: Ethernet address: ... [...] bce1: ASIC (0x57081020); [...] bce1: link state changed to DOWN [...] Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (4.4.1); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (ipms 1.6.0) [...] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0xbce0-0xbcff irq 21 at device 29.0 on pci0 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0xbcc0-0xbcdf irq 20 at device 29.1 on pci0 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0xbca0-0xbcbf irq 21 at device 29.2 on pci0 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0xbc80-0xbc9f irq 20 at device 29.3 on pci0 [...] usbus3 on uhci3 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xfc900400-0xfc9007ff irq 21 at device 29.7 on pci0 [...] usbus4: EHCI version 1.0 [...] usbus4 on ehci0 [...] usbus4: 480Mbps High Speed USB v2.0 [...] pcib14: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci14: <ACPI PCI bus> on pcib14 [...] vgapci0: <VGA-compatible display> port 0xcc00-0xccff mem 0xd0000000-0xd7ffffff,0xfc2d0000-0xfc2dffff irq 19 at device 13.0 on pci14 [...] vgapci0: Boot video device [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci0: <Intel 63XXESB2 SATA300 controller> port 0xbc78-0xbc7f,0xbc70-0xbc73,0xbc60-0xbc67,0xbc58-0xbc5b,0xbc40-0xbc4f mem 0xfc900000-0xfc9003ff irq 23 at device 31.2 on pci0 [...] ata2: <ATA channel> at channel 0 on atapci0 [...] ata3: <ATA channel> at channel 1 on atapci0 [...] fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 [...] fdc0: does not respond [...] device_attach: fdc0 attach returned 6 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xec000-0xeffff pnpid ORM0000 on isa0 [...] sc0: <System console> at flags 0x100 on isa0 [...] sc0: VGA <16 virtual consoles, flags=0x300> [...] WARNING: Device "consolectl" is Giant locked and may be deleted before FreeBSD 14.0. [...] vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] fdc0: No FDOUT register! [...] Timecounter "TSC" frequency 1596041253 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] ugen3.1: <Intel UHCI root HUB> at usbus3 [...] ugen4.1: <Intel EHCI root HUB> at usbus4 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] uhub0 on usbus0 [...] uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus2 [...] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] uhub2 on usbus4 [...] uhub3 on usbus3 [...] uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] uhub4 on usbus1 [...] uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 [...] uhub4: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] ada0 at ata2 bus 0 scbus0 target 0 lun 0 [...] ada0: <SanDisk SSD PLUS 120GB UE4500RL> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 150.000MB/s transfers (SATA, UDMA5, PIO 512bytes) [...] ada0: 114480MB (234455040 512 byte sectors) [...] cd0 at ata3 bus 0 scbus1 target 0 lun 0 [...] cd0: <HL-DT-ST DVD-ROM DH10N 0D08> Removable CD-ROM SCSI device [...] cd0: 150.000MB/s transfers (SATA, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] ada1 at ata2 bus 0 scbus0 target 1 lun 0 [...] ada1: <SAMSUNG HD502HJ 1AJ10001> ATA8-ACS SATA 2.x device [...] ada1: Serial Number... [...] ada1: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) [...] ada1: 476940MB (976773168 512 byte sectors) [...] Root mount waiting for: usbus4 [...] Root mount waiting for: usbus4 [...] Root mount waiting for: usbus4 [...] uhub2: 8 ports with 8 removable, self powered [...] ugen4.2: <vendor 0x04b4 product 0x6560> at usbus4 [...] uhub5 on uhub2 [...] uhub5: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 2> on usbus4 [...] uhub5: MTT enabled [...] Root mount waiting for: usbus4 [...] uhub5: 4 ports with 4 removable, self powered [...] ugen4.3: <DELL DELL USB Keyboard> at usbus4 [...] ukbd0 on uhub5 [...] ukbd0: <DELL DELL USB Keyboard, class 0/0, rev 1.10/1.05, addr 3> on usbus4 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus4 [...] ugen4.4: <PIXART USB OPTICAL MOUSE> at usbus4