[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p11 stable/24.1-n255007-1d6e165fb40 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz (2800.16-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306e4 Family=0x6 Model=0x3e Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 137438953472 (131072 MB) [...] avail memory = 100248449024 (95604 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL PE_SC3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 40 CPUs [...] FreeBSD/SMP: 2 package(s) x 10 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic1: MADT APIC ID 1 != hw id 15 [...] ioapic2: MADT APIC ID 2 != hw id 15 [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 32-55 [...] ioapic2 <Version 2.0> irqs 64-87 [...] Launching APs: 1 6 8 4 7 12 9 17 23 14 13 16 30 35 19 37 10 18 15 3 5 36 25 31 2 24 27 11 33 26 22 21 29 34 32 39 38 20 28 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xb8995000-0xb899501e [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL PE_SC3> [...] acpi0: Power Button (fixed) [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 53 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] ix0: <Intel(R) X520 82599ES (SFI/SFP+)> port 0xfcc0-0xfcdf mem 0xd8d00000-0xd8dfffff,0xd8ff8000-0xd8ffbfff irq 36 at device 0.0 on pci1 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 16 RX queues 16 TX queues [...] ix0: Using MSI-X interrupts with 17 vectors [...] ix0: allocated for 16 queues [...] ix0: allocated for 16 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix0: Option ROM V19-b5-p12 eTrack 0x8000095c PHY FW V65535 [...] ix0: netmap queues/slots: TX 16/2048, RX 16/2048 [...] ix1: <Intel(R) X520 82599ES (SFI/SFP+)> port 0xfce0-0xfcff mem 0xd8e00000-0xd8efffff,0xd8ffc000-0xd8ffffff irq 34 at device 0.1 on pci1 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 16 RX queues 16 TX queues [...] ix1: Using MSI-X interrupts with 17 vectors [...] ix1: allocated for 16 queues [...] ix1: allocated for 16 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix1: Option ROM V19-b5-p12 eTrack 0x8000095c PHY FW V65535 [...] ix1: netmap queues/slots: TX 16/2048, RX 16/2048 [...] pcib2: <ACPI PCI-PCI bridge> irq 53 at device 2.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] bxe0: <QLogic NetXtreme II BCM57810 10GbE (B0) BXE v:1.78.91> mem 0xd5000000-0xd57fffff,0xd5800000-0xd5ffffff,0xd77e0000-0xd77effff irq 40 at device 0.0 on pci2 [...] bxe0: PCI BAR0 [10] memory allocated: 0xd5000000-0xd57fffff (8388608) -> 0xfffff800d5000000 [...] bxe0: PCI BAR2 [18] memory allocated: 0xd5800000-0xd5ffffff (8388608) -> 0xfffff800d5800000 [...] bxe0: PCI BAR4 [20] memory allocated: 0xd77e0000-0xd77effff (65536) -> 0xfffff800d77e0000 [...] bxe0: Found 10Gb Fiber media. [...] bxe0: IFMEDIA flags : 20 [...] bxe0: Using defaults for TSO: 65518/35/2048 [...] bxe0: Ethernet address: ... [...] bxe0: MSI-X vectors Requested 5 and Allocated 5 [...] bxe1: <QLogic NetXtreme II BCM57810 10GbE (B0) BXE v:1.78.91> mem 0xd6000000-0xd67fffff,0xd6800000-0xd6ffffff,0xd77f0000-0xd77fffff irq 44 at device 0.1 on pci2 [...] bxe1: PCI BAR0 [10] memory allocated: 0xd6000000-0xd67fffff (8388608) -> 0xfffff800d6000000 [...] bxe1: PCI BAR2 [18] memory allocated: 0xd6800000-0xd6ffffff (8388608) -> 0xfffff800d6800000 [...] bxe1: PCI BAR4 [20] memory allocated: 0xd77f0000-0xd77fffff (65536) -> 0xfffff800d77f0000 [...] bxe1: Found 10Gb Fiber media. [...] bxe1: IFMEDIA flags : 20 [...] bxe1: Using defaults for TSO: 65518/35/2048 [...] bxe1: Ethernet address: ... [...] bxe1: MSI-X vectors Requested 5 and Allocated 5 [...] pcib3: <ACPI PCI-PCI bridge> irq 53 at device 2.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] AVAGO MegaRAID SAS FreeBSD mrsas driver version: XXX.XXX.XXX.XXX-fbsd [...] mfi0: <Dell PERC H710P Mini (monolithics)> port 0xec00-0xecff mem 0xda7fc000-0xda7fffff,0xda780000-0xda7bffff irq 42 at device 0.0 on pci3 [...] mfi0: Using MSI [...] mfi0: Megaraid SAS driver Ver 4.23 [...] mfi0: FW MaxCmds = 1008, limiting to 128 [...] mfi0: MaxCmd = 1008, Drv MaxCmd = 128, MaxSgl = 70, state = 0xb73c03f0 [...] mfi0: 19324 (765600591s/0x0020/info) - Shutdown command received from host [...] mfi0: 19325 (boot + 4s/0x0020/info) - Firmware initialization started (PCI ID 005b/1000/1f34/1028) [...] mfi0: 19326 (boot + 4s/0x0020/info) - Firmware version 3.131.05-8148 [...] mfi0: 19327 (boot + 5s/0x0008/info) - Battery Present [...] mfi0: 19328 (boot + 5s/0x0020/info) - Package version 21.3.5-0002 [...] mfi0: 19329 (boot + 5s/0x0020/info) - Board Revision A00 [...] mfi0: 19330 (boot + 6s/0x0008/info) - Battery temperature is normal [...] mfi0: 19331 (boot + 6s/0x0008/info) - Current capacity of the battery is above threshold [...] mfi0: 19332 (boot + 20s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored [...] mfi0: 19333 (boot + 20s/0x0002/info) - Inserted: Encl PD 20 [...] pcib4: <ACPI PCI-PCI bridge> irq 53 at device 3.0 on pci0 [...] mfi0: 19334 (boot + 20s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=5c8ca0a0e611pci4: <ACPI PCI bus>aa00,0000000000000000 [...] mfi0: 19335 (boot + 20s/0x0002/info) - Inserted: PD 00(e0x20/s0) [...] on pcib4 [...] mfi0: 19336 (boot + 20s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=4433221104000000,0000000000000000 [...] mfi0: 19337 (boot + 20s/0x0002/WARN) - PD 00(e0x20/s0) is not a certified drive [...] mfi0: 19338 (boot + 20s/0x0002/info) - Inserted: PD 01(e0x20/s1) [...] mfi0: 19339 (boot + 20s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=4433221105000000,0000000000000000 [...] mfi0: 19340 (boot + 20s/0x0002/WARN) - PD 01(e0x20/s1) is not a certified drive [...] pcib5: <ACPI PCI-PCI bridge>mfi0: 19341 (765600662s/0x0020/info) - Time established as 04/05/24 2:51:02; (47 seconds since power on) [...] mfi0: 19342 (765600686s/0x0008/info) - Battery started charging [...] mfi0: 19343 (765600739s/0x0020/info) - Host driver is loaded and operational [...] irq 53 at device 3.2 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> irq 16 at device 17.0 on pci0 [...] pci6: <PCI bus> on pcib6 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.1 (no driver attached) [...] ehci0: <Intel Patsburg USB 2.0 controller> mem 0xdd0fd000-0xdd0fd3ff irq 23 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] pcib7: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] igb0: <Intel(R) I350 (Copper)> mem 0xdb680000-0xdb6fffff,0xdb7f8000-0xdb7fbfff irq 19 at device 0.0 on pci8 [...] igb0: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000fab [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 8 RX queues 8 TX queues [...] igb0: Using MSI-X interrupts with 9 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 8/1024, RX 8/1024 [...] igb1: <Intel(R) I350 (Copper)> mem 0xdb700000-0xdb77ffff,0xdb7fc000-0xdb7fffff irq 18 at device 0.1 on pci8 [...] igb1: EEPROM V1.67-0 Option ROM V19-b5-p12 eTrack 0x80000fab [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 8 RX queues 8 TX queues [...] igb1: Using MSI-X interrupts with 9 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 8/1024, RX 8/1024 [...] pcib9: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] pcib10: <PCI-PCI bridge> at device 0.0 on pci9 [...] pci10: <PCI bus> on pcib10 [...] pcib11: <PCI-PCI bridge> at device 0.0 on pci10 [...] pci11: <PCI bus> on pcib11 [...] pcib12: <PCI-PCI bridge> at device 0.0 on pci11 [...] pci12: <PCI bus> on pcib12 [...] vgapci0: <VGA-compatible display> mem 0xd4000000-0xd4ffffff,0xdc7fc000-0xdc7fffff,0xdb800000-0xdbffffff irq 19 at device 0.0 on pci12 [...] vgapci0: Boot video device [...] pcib13: <PCI-PCI bridge> at device 1.0 on pci10 [...] pci13: <PCI bus> on pcib13 [...] ehci1: <Intel Patsburg USB 2.0 controller> mem 0xdd0fe000-0xdd0fe3ff irq 22 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib14: <PCI-PCI bridge> at device 30.0 on pci0 [...] pci14: <PCI bus> on pcib14 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Patsburg AHCI SATA controller> port 0xdce8-0xdcef,0xdcf8-0xdcfb,0xdcf0-0xdcf7,0xdcfc-0xdcff,0xdcc0-0xdcdf mem 0xdd0ff000-0xdd0ff7ff irq 20 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib15: <ACPI Host-PCI bridge> on acpi0 [...] pci15: <ACPI PCI bus> on pcib15 [...] pcib16: <ACPI PCI-PCI bridge> irq 85 at device 1.0 on pci15 [...] pci16: <ACPI PCI bus> on pcib16 [...] pcib17: <ACPI PCI-PCI bridge> irq 85 at device 2.0 on pci15 [...] pci17: <ACPI PCI bus> on pcib17 [...] pcib18: <ACPI PCI-PCI bridge> irq 85 at device 3.0 on pci15 [...] pci18: <ACPI PCI bus> on pcib18 [...] pcib19: <ACPI PCI-PCI bridge> irq 85 at device 3.2 on pci15 [...] pci19: <ACPI PCI bus> on pcib19 [...] pcib20: <ACPI Host-PCI bridge> on acpi0 [...] pci20: <ACPI PCI bus> on pcib20 [...] pci20: <dasp, performance counters> at device 14.1 (no driver attached) [...] pci20: <dasp, performance counters> at device 19.1 (no driver attached) [...] pci20: <dasp, performance counters> at device 19.5 (no driver attached) [...] pcib21: <ACPI Host-PCI bridge> on acpi0 [...] pci21: <ACPI PCI bus> on pcib21 [...] pci21: <dasp, performance counters> at device 14.1 (no driver attached) [...] pci21: <dasp, performance counters> at device 19.1 (no driver attached) [...] pci21: <dasp, performance counters> at device 19.5 (no driver attached) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xca000-0xd17ff,0xec000-0xeffff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est3 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est4 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est5 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est6 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est7 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est8 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est9 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est10 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est11 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est12 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est13 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est14 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est15 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est16 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est17 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est18 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est19 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est20 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est21 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est22 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est23 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est24 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est25 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est26 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est27 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est28 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est29 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est30 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est31 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est32 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est33 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est34 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est35 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est36 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est37 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est38 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 240700001f00 [...] device_attach: est39 attach returned 6 [...] Timecounter "TSC-low" frequency 1399999744 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] mfid0 on mfi0 [...] mfid0: 2097152MB (4294967296 sectors) RAID volume 'SSD_Virtual1' is optimal [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] Root mount waiting for: usbus0 usbus1 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] Root mount waiting for: usbus0 usbus1 [...] uhub2: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device Jieli Technology UACDemoV1.0 (0x4c4a:0x4155) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device Jieli Technology UACDemoV1.0 (0x4c4a:0x4155) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device Jieli Technology UACDemoV1.0 (0x4c4a:0x4155) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device Jieli Technology UACDemoV1.0 (0x4c4a:0x4155) [...] ugen0.3: <Jieli Technology UACDemoV1.0> at usbus0 [...] umass0 on uhub2 [...] umass0: <Jieli Technology UACDemoV1.0, class 0/0, rev 1.10/1.00, addr 3> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc101 [...] umass0:7:0: Attached to scbus7 [...] da0 at umass-sim0 bus 0 scbus7 target 0 lun 0 [...] da0: <BR25 UDISK 1.00> Removable Direct Access SCSI-2 device [...] da0: Serial Number... [...] da0: 1.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] ugen0.4: <vendor 0x045b product 0x0209> at usbus0 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x045b product 0x0209, class 9/0, rev 2.00/1.00, addr 4> on usbus0 [...] uhub4: 4 ports with 4 removable, self powered [...] ugen0.5: <vendor 0x0461 HP USB Multimedia Keyboard> at usbus0 [...] ukbd0 on uhub4 [...] ukbd0: <vendor 0x0461 HP USB Multimedia Keyboard, class 0/0, rev 1.10/1.13, addr 5> on usbus0 [...] kbd1 at ukbd0 [...] Root mount waiting for: usbus0 [...] ugen0.6: <C-Media Electronics Inc. USB Audio Device> at usbus0 [...] ugen0.7: <no manufacturer Gadget USB HUB> at usbus0 [...] uhub5 on uhub2 [...] uhub5: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 7> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub5: 6 ports with 6 removable, self powered [...] ugen0.8: <Avocent Keyboard/Mouse Function> at usbus0 [...] ukbd1 on uhub5 [...] ukbd1: <Keyboard> on usbus0 [...] kbd2 at ukbd1 [...] mfi0: 19344 (765600751s/0x0008/info) - Battery charge complete