[...] ichsmb0: <Intel Lynx Point SMBus controller> port 0xf040-0xf05f mem 0xf0615000-0xf06150ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] uhid0 on uhub2 [...] uhid0: <vendor 0x04f3 product 0x0103, class 0/0, rev 1.10/1.07, addr 1> on usbus0 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] re0: link state changed to UP [...] vlan0: changing name to 're0_vlan103' [...] vlan1: changing name to 're0_vlan104' [...] vlan2: changing name to 're0_vlan106' [...] vlan3: changing name to 're0_vlan113' [...] vlan4: changing name to 're0_vlan200' [...] vlan5: changing name to 're0_vlan300' [...] vlan6: changing name to 're0_vlan500' [...] vlan7: changing name to 're0_vlan501' [...] vlan8: changing name to 're0_vlan600' [...] vlan9: changing name to 're0_vlan65' [...] vlan10: changing name to 're0_vlan66' [...] re1: link state changed to UP [...] bridge3: Ethernet address: ... [...] bridge3: link state changed to UP [...] re0: promiscuous mode enabled [...] re0_vlan66: promiscuous mode enabled [...] bridge2: Ethernet address: ... [...] re0_vlan65: promiscuous mode enabled [...] bridge2: link state changed to UP [...] tun2: changing name to 'ovpns2' [...] tun3: changing name to 'ovpns3' [...] tun5: changing name to 'ovpns5' [...] tun6: changing name to 'ovpns6' [...] tun1: changing name to 'ovpns1' [...] tun4: changing name to 'ovpns4' [...] tun7: changing name to 'ovpns7' [...] tun8: changing name to 'ovpns8' [...] tun9: changing name to 'ovpns9' [...] tun10: changing name to 'ovpns10' [...] tun11: changing name to 'ovpns11' [...] tun12: changing name to 'ovpns12' [...] ovpns2: link state changed to UP [...] ovpns3: link state changed to UP [...] ovpns5: link state changed to UP [...] ovpns6: link state changed to UP [...] ovpns1: link state changed to UP [...] ovpns4: link state changed to UP [...] ovpns7: link state changed to UP [...] ovpns8: link state changed to UP [...] ovpns9: link state changed to UP [...] ovpns10: link state changed to UP [...] ovpns11: link state changed to UP [...] ovpns12: link state changed to UP [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ovpns5: link state changed to DOWN [...] ovpns5: link state changed to UP [...] ovpns7: link state changed to DOWN [...] ovpns7: link state changed to UP [...] 605.036814 [1173] generic_netmap_attach Emulated adapter for re0_vlan104 created (prev was NULL) [...] 605.036832 [1078] generic_netmap_dtor Emulated netmap adapter for re0_vlan104 destroyed [...] 605.036891 [1173] generic_netmap_attach Emulated adapter for re0_vlan104 created (prev was NULL) [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] load_dn_sched dn_sched FIFO loaded [...] load_dn_sched dn_sched QFQ loaded [...] load_dn_sched dn_sched RR loaded [...] load_dn_sched dn_sched WF2Q+ loaded [...] load_dn_sched dn_sched PRIO loaded [...] load_dn_sched dn_sched FQ_CODEL loaded [...] load_dn_sched dn_sched FQ_PIE loaded [...] load_dn_aqm dn_aqm CODEL loaded [...] load_dn_aqm dn_aqm PIE loaded [...] 605.288360 [ 321] generic_netmap_register Emulated adapter for re0_vlan104 activated [...] 605.288790 [1173] generic_netmap_attach Emulated adapter for re0_vlan300 created (prev was NULL) [...] 605.288805 [1078] generic_netmap_dtor Emulated netmap adapter for re0_vlan300 destroyed [...] 605.288908 [1173] generic_netmap_attach Emulated adapter for re0_vlan300 created (prev was NULL) [...] 605.289007 [ 321] generic_netmap_register Emulated adapter for re0_vlan300 activated [...] 605.291912 [1173] generic_netmap_attach Emulated adapter for re0_vlan500 created (prev was NULL) [...] 605.291929 [1078] generic_netmap_dtor Emulated netmap adapter for re0_vlan500 destroyed [...] 605.292030 [1173] generic_netmap_attach Emulated adapter for re0_vlan500 created (prev was NULL) [...] 605.292097 [ 321] generic_netmap_register Emulated adapter for re0_vlan500 activated [...] 605.293034 [1173] generic_netmap_attach Emulated adapter for re0_vlan66 created (prev was NULL) [...] 605.293047 [1078] generic_netmap_dtor Emulated netmap adapter for re0_vlan66 destroyed [...] 605.293107 [1173] generic_netmap_attach Emulated adapter for re0_vlan66 created (prev was NULL) [...] 605.293188 [ 321] generic_netmap_register Emulated adapter for re0_vlan66 activated [...] 605.294367 [1173] generic_netmap_attach Emulated adapter for re1 created (prev was NULL) [...] 605.294379 [1078] generic_netmap_dtor Emulated netmap adapter for re1 destroyed [...] 605.297512 [1173] generic_netmap_attach Emulated adapter for re0_vlan103 created (prev was NULL) [...] 605.297527 [1078] generic_netmap_dtor Emulated netmap adapter for re0_vlan103 destroyed [...] 605.297589 [1173] generic_netmap_attach Emulated adapter for re0_vlan103 created (prev was NULL) [...] 605.297669 [ 321] generic_netmap_register Emulated adapter for re0_vlan103 activated [...] 605.302714 [1173] generic_netmap_attach Emulated adapter for re0_vlan113 created (prev was NULL) [...] 605.302730 [1078] generic_netmap_dtor Emulated netmap adapter for re0_vlan113 destroyed [...] 605.302793 [1173] generic_netmap_attach Emulated adapter for re0_vlan113 created (prev was NULL) [...] 605.302869 [ 321] generic_netmap_register Emulated adapter for re0_vlan113 activated [...] 605.308465 [1173] generic_netmap_attach Emulated adapter for re1 created (prev was NULL) [...] 605.308572 [ 321] generic_netmap_register Emulated adapter for re1 activated [...] 605.313867 [1173] generic_netmap_attach Emulated adapter for re0_vlan106 created (prev was NULL) [...] 605.313883 [1078] generic_netmap_dtor Emulated netmap adapter for re0_vlan106 destroyed [...] 605.313953 [1173] generic_netmap_attach Emulated adapter for re0_vlan106 created (prev was NULL) [...] 605.314036 [ 321] generic_netmap_register Emulated adapter for re0_vlan106 activated [...] ovpns4: link state changed to DOWN [...] ovpns2: link state changed to DOWN [...] ovpns12: link state changed to DOWN [...] ovpns5: link state changed to DOWN [...] ovpns1: link state changed to DOWN [...] ovpns3: link state changed to DOWN [...] ovpns8: link state changed to DOWN [...] ovpns9: link state changed to DOWN [...] ovpns6: link state changed to DOWN [...] ovpns11: link state changed to DOWN [...] ovpns7: link state changed to DOWN [...] ovpns10: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 6 0 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p7 stable/23.1-n250430-7eb6eb035df SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i5-4460 CPU @ 3.20GHz (3199.23-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8178724864 (7799 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 3 1 2 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0xf0504000-0xf0504fff,0xf0500000-0xf0503fff irq 16 at device 0.0 on pci1 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: version:1.98.00 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf0000000-0xf03fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf0600000-0xf060ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf0618000-0xf06183ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Lynx Point HDA Controller> mem 0xf0610000-0xf0613fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re1: <Realtek PCIe GbE Family Controller> port 0xd000-0xd0ff mem 0xf0404000-0xf0404fff,0xf0400000-0xf0403fff irq 19 at device 0.0 on pci3 [...] re1: Using Memory Mapping! [...] re1: Using 1 MSI-X message [...] re1: ASPM disabled [...] re1: version:1.98.00 [...] re1: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re1: Ethernet address: ... [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf0617000-0xf06173ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf0616000-0xf06167ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xcf000-0xcffff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1599535592 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC662 rev1 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC662 rev1 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC662 rev1 (Rear Analog)> at nid 20 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC662 rev1 (Front Analog)> at nid 27 and 25 on hdaa0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus2 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub2 on usbus0 [...] uhub2: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <CT240BX500SSD1 M6CR054> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] uhub2: 17 ports with 17 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] ugen0.2: <vendor 0x04f3 product 0x0103> at usbus0 [...] ukbd0 on uhub2 [...] ukbd0: <vendor 0x04f3 product 0x0103, class 0/0, rev 1.10/1.07, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub4 on uhub1 [...] uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2 [...] uhub3: 4 ports with 4 removable, self powered [...] uhub4: 6 ports with 6 removable, self powered