[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p7 stable/22.7-n250278-749aeb64254 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: AMD EPYC 3201 8-Core Processor (1497.26-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x800f12 Family=0x17 Model=0x1 Stepping=2 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX> [...] Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr,IBPB> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16456781824 (15694 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INSYDE WALLABY> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 cache groups x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0: MADT APIC ID 128 != hw id 0 [...] ioapic1: MADT APIC ID 129 != hw id 0 [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 7 4 3 5 6 1 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x7945e000-0x7945e01e [...] smbios0: Version: 3.0, BCD Revision: 3.0 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <INSYDE WALLABY> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> at device 1.3 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I210 Flashless (Copper)> port 0x5000-0x501f mem 0x80800000-0x8081ffff,0x80820000-0x80823fff at device 0.0 on pci1 [...] igb0: NVM V0.6 imgtype6 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 1.4 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb1: <Intel(R) I210 Flashless (Copper)> port 0x4000-0x401f mem 0x80700000-0x8071ffff,0x80720000-0x80723fff at device 0.0 on pci2 [...] igb1: NVM V0.6 imgtype6 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib3: <ACPI PCI-PCI bridge> at device 1.5 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb2: <Intel(R) I210 Flashless (Copper)> port 0x3000-0x301f mem 0x80600000-0x8061ffff,0x80620000-0x80623fff at device 0.0 on pci3 [...] igb2: NVM V0.6 imgtype6 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib4: <ACPI PCI-PCI bridge> at device 1.6 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb3: <Intel(R) I210 Flashless (Copper)> port 0x2000-0x201f mem 0x80500000-0x8051ffff,0x80520000-0x80523fff at device 0.0 on pci4 [...] igb3: NVM V0.6 imgtype6 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <ACPI PCI-PCI bridge> at device 7.1 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pci5: <unknown> at device 0.0 (no driver attached) [...] pci5: <encrypt/decrypt> at device 0.2 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x80200000-0x802fffff at device 0.3 on pci5 [...] xhci0: 64 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pcib6: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] pci6: <unknown> at device 0.0 (no driver attached) [...] pci6: <encrypt/decrypt> at device 0.1 (no driver attached) [...] ahci0: <AMD KERNCZ AHCI SATA controller> mem 0x8018e000-0x8018efff at device 0.2 on pci6 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] hdac0: <AMD X370 HDA Controller> mem 0x80180000-0x80187fff at device 0.3 on pci6 [...] ax0: <AMD 10 Gigabit Ethernet Driver> mem 0x80160000-0x8017ffff,0x80140000-0x8015ffff,0x80188000-0x80189fff at device 0.4 on pci6 [...] ax0: Using 512 TX descriptors and 512 RX descriptors [...] ax0: Using 8 RX queues 8 TX queues [...] ax0: Using MSI-X interrupts with 12 vectors [...] ax0: Ethernet address: ... [...] ax0: xgbe_config_sph_mode: SPH disabled in channel 0 [...] ax0: xgbe_config_sph_mode: SPH disabled in channel 1 [...] ax0: xgbe_config_sph_mode: SPH disabled in channel 2 [...] ax0: xgbe_config_sph_mode: SPH disabled in channel 3 [...] ax0: xgbe_config_sph_mode: SPH disabled in channel 4 [...] ax0: xgbe_config_sph_mode: SPH disabled in channel 5 [...] ax0: xgbe_config_sph_mode: SPH disabled in channel 6 [...] ax0: xgbe_config_sph_mode: SPH disabled in channel 7 [...] ax0: RSS Enabled [...] ax0: Receive checksum offload Enabled [...] ax0: VLAN filtering Enabled [...] ax0: VLAN Stripping Enabled [...] ax0: Checking GPIO expander validity [...] ax0: Input port registers: 0x0 [...] ax0: Output port registers: 0x7777 [...] ax0: Polarity port registers: 0x0 [...] ax0: Configuration port registers: 0x77ff [...] ax0: SFP detected: [...] ax0: vendor: Ubiquiti Inc. [...] ax0: part number: DAC-SFP10-0.5M [...] ax0: revision level: A1 [...] ax0: serial number: ... [...] ax0: netmap queues/slots: TX 8/512, RX 8/512 [...] ax1: <AMD 10 Gigabit Ethernet Driver> mem 0x80120000-0x8013ffff,0x80100000-0x8011ffff,0x8018a000-0x8018bfff at device 0.5 on pci6 [...] ax1: Using 512 TX descriptors and 512 RX descriptors [...] ax1: Using 8 RX queues 8 TX queues [...] ax1: Using MSI-X interrupts with 12 vectors [...] ax1: Ethernet address: ... [...] ax1: xgbe_config_sph_mode: SPH disabled in channel 0 [...] ax1: xgbe_config_sph_mode: SPH disabled in channel 1 [...] ax1: xgbe_config_sph_mode: SPH disabled in channel 2 [...] ax1: xgbe_config_sph_mode: SPH disabled in channel 3 [...] ax1: xgbe_config_sph_mode: SPH disabled in channel 4 [...] ax1: xgbe_config_sph_mode: SPH disabled in channel 5 [...] ax1: xgbe_config_sph_mode: SPH disabled in channel 6 [...] ax1: xgbe_config_sph_mode: SPH disabled in channel 7 [...] ax1: RSS Enabled [...] ax1: Receive checksum offload Enabled [...] ax1: VLAN filtering Enabled [...] ax1: VLAN Stripping Enabled [...] ax1: Checking GPIO expander validity [...] ax1: Input port registers: 0x0 [...] ax1: Output port registers: 0x7777 [...] ax1: Polarity port registers: 0x0 [...] ax1: Configuration port registers: 0x77ff [...] ax1: SFP detected: [...] ax1: vendor: Ubiquiti Inc. [...] ax1: part number: UACC-CM-RJ45-MG [...] ax1: revision level: U07 [...] ax1: serial number: ... [...] ax1: netmap queues/slots: TX 8/512, RX 8/512 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] uart2: <16x50 with 256 byte FIFO> iomem 0xfedc9000-0xfedc9fff,0xfedc7000-0xfedc7fff irq 3 on acpi0 [...] uart2: console (115384,n,8,1) [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC" frequency 1497186464 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ugen0.1: <AMD XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <TS256GMTS952T2 02J0T4GB> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 1024bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] uhub0: 8 ports with 8 removable, self powered [...] ax1: Link is UP - 10Gbps/Full - flow control off [...] ax1: link state changed to UP [...] ax0: Link is DOWN